Table names to find Program names and Table names
Hi All,
I want to find Program names and Tables names where Transaction codes are not been created.
If TCodes are created I can find from TSTC.
But programs and tables which does not have tcodes.
How can I find them?
Hi Praveen Kumar
You know the program name go to se38 and find out if u know table name go to se11 and find out .if you want to see both where there are used in which program go to se80 it would be easy.
How to trace in se80 . select programe and down give programe name you will gte it.
Similar Messages
-
Table to find spool no and corresponding program name
Is there any Table to find spool no and corresponding program name. I know one table that will give only for background jobs TBTCP table. I want fore ground also
table: TSP01
Way to fetch spool number is:
CONCATENATE sy-repid+0(9)
sy-uname+0(3)
INTO lc_rq2name.
SELECT rqident FROM tsp01
INTO TABLE li_spool
WHERE rq2name EQ lc_rq2name
AND rqowner EQ sy-uname.
*** Sort spool table so that latest spool entry is at top
SORT li_spool STABLE BY rqcretime rqident DESCENDING.
*** Read the first line of the table to get the spool number
READ TABLE li_spool INTO lwa_spool INDEX 1.
lv_spoolid = lwa_spool-rqident.
ags. -
How to find the columns and tables used in a stored procedure?
Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBKFor example:
SQL> create or replace
2 procedure p1
3 is
4 cnt number;
5 begin
6 select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2 referenced_name
3 from dba_dependencies
4 where owner = 'SCOTT'
5 and name = 'P1'
6 and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER REFERENCED_NAME
SCOTT EMP
SQL> SY. -
Hi,,,
Can anybody tell me How to find program name with its respective Tcode.. I searched inside its package..that showing Screen numbers only.. So any other ways welcome
Regards
Karthik.THi
Go to SE93.
Enter the TCODE and press display.
Here you can see the program name.
OR
Go to the TCODE (for which u want prog name)
Follow Menu path: System --> Status..
Check the Program field in SAP data.
Hope it helps
Regards
Gaurav -
How to find Program Name by Recording name
Hi,
How o find program name ? for example i have recording(SHDB) name is:ZVA01REC.
i want to find the respective porgram for that recoring?
Thanks and Regards,
Anu.Hi Anitha,
"No it's showing standard program name like:SAPMM06E
but actual program name is:ZBDCME22."
SAPMM06E is the program the recording runs
ZBDCME22 must be an additional program that someone must have created for running the recording.
There is no way for u to find a program for a given recording (this is only a one way trafic; recording -> program create; not visa versa)
your best bet would be that search in se38 for programs starting with ZBDC* and then check the short text. may be the person who made it was kind enough to update the short text with teh recording name.
Hope this was of some help.
Regards,
Sagar.
Edited by: Sagar Mehta on Nov 12, 2008 10:00 AM -
I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I need some help on my MAC about them problem that I have and the question is: My PC cannot find my MAC and it ask a question about putting in the password and I did it come back and said: Logon failure: unknown user name or bad password.
Thank You
LumpyYou have to explain a little more fully what you are trying to do and what protocol. Whats your set up?
-
From which tables i would find the delivery and billing document field..??
I need to create an ALV report which displays the following details in the output.
Order No Item No Material Order Qty Item Category Plant Delivery Billing Document Sales Org Dist Channel Division Created By Created On Changed On
For(Order No Item No Material Order Qty Item Category Plant) i took the fields from vbap and
for(Sales Org Dist Channel Division Created By Created On Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PMi am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
BEGIN OF st_vbap,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
pstyv TYPE vbap-pstyv,
kwmeng TYPE vbap-kwmeng,
werks TYPE vbap-werks,
END OF st_vbap,
BEGIN OF st_vbak,
vbeln TYPE vbak-vbeln,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
vkorg TYPE vbak-vkorg,
vtweg TYPE vbak-vtweg,
spart TYPE vbak-spart,
aedat TYPE vbak-aedat,
END OF st_vbak,
BEGIN OF st_final,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
pstyv TYPE vbap-pstyv,
kwmeng TYPE vbap-kwmeng,
werks TYPE vbap-werks,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
vkorg TYPE vbak-vkorg,
vtweg TYPE vbak-vtweg,
spart TYPE vbak-spart,
aedat TYPE vbak-aedat,
END OF st_final.
DATA:
lt_vbap TYPE TABLE OF st_vbap,
ls_vbap TYPE st_vbap,
lt_vbak TYPE TABLE OF st_vbak,
ls_vbak TYPE st_vbak,
lt_final TYPE TABLE OF st_final,
ls_final TYPE st_final,
lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_fieldcat TYPE slis_fieldcat_alv,
layout TYPE slis_layout_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
'VBELN' TEXT-002,
'POSNR' TEXT-003,
'MATNR' TEXT-004,
'KWMENG' TEXT-005,
'PSTYV' TEXT-006,
'WERKS' TEXT-007,
'VKORG' TEXT-008,
'VTWEG' TEXT-009,
'SPART' TEXT-010,
'ERNAM' TEXT-011,
'ERDAT' TEXT-012,
'AEDAT' TEXT-013.
PERFORM display.
*& Form SELECT_DATA
text
FORM select_data.
SELECT
vbeln
vkorg
vtweg
spart
ernam
erdat
aedat
INTO CORRESPONDING FIELDS OF TABLE lt_vbak
FROM vbak
WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
SORT lt_vbak by vbeln.
ENDIF.
SELECT
vbeln
posnr
matnr
kwmeng
pstyv
werks
INTO CORRESPONDING FIELDS OF TABLE lt_vbap
FROM vbap
FOR ALL ENTRIES IN lt_vbak
WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
SORT lt_vbap by vbeln.
ENDIF.
ENDFORM. "SELECT_DATA
*& Form LOOP_FINAL
text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
ls_final-vbeln = ls_vbap-vbeln.
ls_final-posnr = ls_vbap-posnr.
ls_final-matnr = ls_vbap-matnr.
ls_final-kwmeng = ls_vbap-kwmeng.
ls_final-pstyv = ls_vbap-pstyv.
ls_final-werks = ls_vbap-werks.
READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
ls_final-vkorg = ls_vbak-vkorg.
ls_final-vtweg = ls_vbak-vtweg.
ls_final-spart = ls_vbak-spart.
ls_final-ernam = ls_vbak-ernam.
ls_final-erdat = ls_vbak-erdat.
ls_final-aedat = ls_vbak-aedat.
APPEND ls_final TO lt_final.
CLEAR ls_final.
ENDLOOP.
ENDFORM. "LOOP_FINAL
*& Form SORT
text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM. "SORT
*& Form A
text
-->FNAME text
-->SELTEXT text
-->EMPHA text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM. "A
*& Form ALV
text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
is_layout = layout
it_fieldcat = lt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = lt_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = C_X
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = lt_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ALV -
I wanna know how i can get my name to appear on the top right corner of my finder bar. And i cant c any drive that is connected to my laptop on the desktop like i could in snow leopord, i can access it through my finder window but it doesnt show up on my desktop??
MACBOOK PRO 2.0GHZ, OSX LION" And i cant c any drive that is connected to my laptop on the desktop like i could in snow leopord, i can access it through my finder window but it doesnt show up on my desktop??"
Finder>Preferences>General. Check the boxes.
"I wanna know how i can get my name to appear on the top right corner of my finder bar."
Login as the user.
Try posting - not texting. -
Which Table, can I find the class and characteristic assigned to equipment.
Hi all,
I have assigned a characteristc to a class.
And assigned this class to an equipment.
Now in which table can i find the class assigned to this equipment.
What is the logic to find the class and characteristic.
Thanks in advance.
PiyushHi,
As per above post, you can find classes. To find characteristics, Give EQUNR value in OBJEK field in AUSP table & get the ATINN value.
Give ATINN value in ATINN field in CABN table & get ATNAM field value.
In AUSP table, you can get the values against each characteristics as well.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 19, 2011 9:28 AM -
How to find data dictionary and oracle schema tables for UTF8 char conversi
I am doing UTF8 char conversition, i got lot of convertable objects,as per document we don't need to worry about data dictionary objects and how to find data dictionary and oracle schema objects for UTF8 char conversition.
USER.TABLE Convertible Truncation Lossy
MDSYS.OPENLS_NODES 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE 1 0 0
MDSYS.SDO_STYLES_TABLE 78 0 0
MDSYS.SDO_XML_SCHEMAS 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD 51 0 0
ORDDATA.ORDDCM_DOCS 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS 1 0 0
SYS.METASTYLESHEET 178 0 0
SYS.REGISTRY$ERROR 2 0 0
SYS.RULE$ 21 0 0
SYS.SCHEDULER$_EVENT_LOG 182 0 0
SYS.WRH$_SQLTEXT 2,099 0 0
SYS.WRH$_SQL_PLAN 1,736 0 0
SYS.WRI$_ADV_ACTIONS 5,452 0 0
SYS.WRI$_ADV_DIRECTIVE_META 5 0 0
SYS.WRI$_ADV_OBJECTS 2,278 0 0
SYS.WRI$_ADV_RATIONALE 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA 188 0 0
SYS.WRI$_DBU_FEATURE_USAGE 16 0 0
SYS.WRI$_DBU_HWM_METADATA 20 0 0
SYS.WRI$_REPT_FILES 27 0 0
XDB.XDB$DXPTAB 2 0 0
XML CSX Dictionary Tables:
USER.TABLE Convertible Truncation Lossy
Application Data:
USER.TABLE Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES 15 0 0
APPLSYS.FND_OAM_DOC_LINK 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1 6 0 0
AZ.AZ_APIS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B 48 0 0
ECX.ECX_DTDS 205 0 0
ECX.ECX_FILES 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES 41 0 0
JTF.JTF_HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS 82 0 0
JTF.JTY_TRANS_USG_PGM_SQL 29 0 0
ODM.ODM_PMML_DTD 1 0 0
OKC.OKC_REPORT_SQL_B 3 0 0
OKC.OKC_REPORT_SQL_TL 2 0 0
OKC.OKC_REPORT_XSL_TL 5 0 0
XDP.XDP_PROC_BODY 10 0 0
[Distribution of Convertible, Truncated and Lossy Data by Column]
Data Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
MDSYS.OPENLS_NODES|SYS_NC00004$ 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS|PARAM_VALUE_FILE 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE|XMLSCHEMA 1 0 0
MDSYS.SDO_STYLES_TABLE|DEFINITION 78 0 0
MDSYS.SDO_XML_SCHEMAS|XMLSCHEMA 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD|SYS_NC00004$ 51 0 0
ORDDATA.ORDDCM_DOCS|SYS_NC00005$ 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS|SYS_NC00007$ 1 0 0
SYS.METASTYLESHEET|STYLESHEET 178 0 0
SYS.REGISTRY$ERROR|MESSAGE 1 0 0
SYS.REGISTRY$ERROR|STATEMENT 1 0 0
SYS.RULE$|CONDITION 21 0 0
SYS.SCHEDULER$_EVENT_LOG|ADDITIONAL_INFO 182 0 0
SYS.WRH$_SQLTEXT|SQL_TEXT 2,099 0 0
SYS.WRH$_SQL_PLAN|OTHER_XML 1,736 0 0
SYS.WRI$_ADV_ACTIONS|ATTR5 2,726 0 0
SYS.WRI$_ADV_ACTIONS|ATTR6 2,726 0 0
SYS.WRI$_ADV_DIRECTIVE_META|DATA 5 0 0
SYS.WRI$_ADV_OBJECTS|ATTR4 2,278 0 0
SYS.WRI$_ADV_RATIONALE|ATTR5 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS|OTHER_XML 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS|OTHER 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA|INST_CHK_LOGIC 21 0 0
SYS.WRI$_DBU_FEATURE_METADATA|USG_DET_LOGIC 167 0 0
SYS.WRI$_DBU_FEATURE_USAGE|FEATURE_INFO 16 0 0
SYS.WRI$_DBU_HWM_METADATA|LOGIC 20 0 0
SYS.WRI$_REPT_FILES|SYS_NC00005$ 27 0 0
XDB.XDB$DXPTAB|SYS_NC00006$ 2 0 0
XML CSX Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
Application Data:
USER.TABLE|COLUMN Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS|SYS_NC00023$ 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I|TOKEN_TEXT 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS|PROGRAM_ANNOTAT 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES|TEXT 15 0 0
APPLSYS.FND_OAM_DOC_LINK|DOC_LINK_INFO 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1|TEXT 6 0 0
AZ.AZ_APIS|FILTERING_PARAMETERS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B|FILTERING_PARAMETE 48 0 0
ECX.ECX_DTDS|PAYLOAD 205 0 0
ECX.ECX_FILES|PAYLOAD 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES|ATTRIBUTE_BUNDLE_DATA 41 0 0
JTF.JTF_HEADER_DTD|HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_DTD 41 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_SQL 41 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_DEA_SQL 1 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_INCR_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_TOTAL_SQL 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|INCR_REASSIGN_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_INSERT 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_SQL 6 0 0
ODM.ODM_PMML_DTD|DTD 1 0 0
OKC.OKC_REPORT_SQL_B|SQL_TEXT 3 0 0
OKC.OKC_REPORT_SQL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|XSL_TEXT 3 0 0
XDP.XDP_PROC_BODY|PROC_BODY 10 0 0
-------------------------------------------------- ---------------- ---------------- ----------------Hi;
Please run below query which could be helpful for your issue:
select * from dictionary where TABLE_NAME LIKE '%NLS%'
select * from dictionary where TABLE_NAME LIKE '%GLOBAL%'
Regard
Helios -
Hi All,
There is a customized tab with details in a screen. How to see the customized tab details in the program. When I go and see in the status and program name, there are many includes written over there.
I just want to go and see the details in the tab of the screen in the program. Please let me know how to see the TAB details in the program.
Thanks,
RamanaHello Ramana,
You want to access to the subscreen. One way to do this is going to:
System->Status...
And there is the subscreen program "Program (Subscreen)" and under it, there is the Subscreen "Screen number".
Hope this helps (and I obtain some points) -
R3 tables about job, program, variant and variant value
Hi, Experts,
Now we are schedule lots of R3 jobs before BW uploading.
every job has ABAP program, each ABAP program use one variant.
my problem is: there are so much job sceduled, we are hard to go to check all setting is correct. so anyone can tell me what's R3 table have the information of job,program, variant and variant value
I just some TBT* table which only have job info.
Thanks a lotHi Jie,
The variants can be found in <b>TVARV</b>,VARI,VARID,VARIT and VARIS tables.
Also Check these tables:
SMEN_OBLIG
SREPOVARI
SREPOLIST
SREPOUSER
Bye
Dinesh
Message was edited by: Dinesh Lalchand -
Is there a way to dial a contact by just typing its name in the keypad....as one can do in all the blackberry and android dialers...it is quite a job first to find the contact and then dial..
People - you critisize something you've no idea about! Smart dialing (also called T9) is NOT about text input for God's sake...it's about dialing a contact in a really quick and simple way just by clicking on one of 10 dial buttons (much bigger and easier to be tapped btw especially on the move) and the phone finds all the contacts matching typed combination
For example I want to dial contact MLADD - I then tap on 6,5,2,3,3 and the phone searches for contacts matching all the combinations hidden on these numbers.
Another example: see Apple's website containing contact line number specified in 2 ways: (800) MY-IPHONE (800-694-7466)
Do you get my point now?
I've used at least 6 different phones in my life so far and went through most of well known platforms including Symbian, Blackberry, Android, Windows Phone and now iOS. I'm very sure there is no better and faster way to quickly and easily dial somebody but by using a smart dial. Dialing somebody this way takes 2 seconds while dialing using tapping on contacts field, then typing a word using keyboard (assuming you click on a right button when on the move) takes a while longer and is frustrating.
It's just a matter of a wider perspective when looking at this problem. If you would use it at least once - you would demand it as well.
For people liking tapping everywhere to perform basic actions - let it be as it is, but why not to improve something by adding an additional option in setting and enable SmartDial? -
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
Maybe you are looking for
-
Stream aliases and dynamic streaming
My recent tweets (@flashfreaker) have centered around getting dynamic streaming via RTMP working with my Wowza EC2 implementation on the cloud. While I'm a big fan of FMS/FMIS (I wrote some of the first Flash Communication Server coverage after all.
-
How do I submit a channel to be considered for Apple TV?
Dear Apple Support, Is there a procedure in submitting a channel to be approved for Apple TV? Thanks, Joey
-
When I launch iTunes on the PC, iTunes will not connect to Airplay speakers. Only after a new start of iTunes a connection is established.
-
OAS4081 and ORB problem: OWS-20214
Hey folks, I just installed a clean install of OAS4.0.8.1 on linux (grabbing missing files from an NT installation or copying the grman versions over), and after the install, the node manager started up OK, with the host:8888 accessible and working O
-
Hi, I have the following problem with Encore DVD 1.5.1: I want to create a menu with audio background. The audio file should only play once, so I set the loop to none. However, no matter what I set for the loop count, it always repeats the music titl