Table to find maintainence work center in equipment

Please let me know where maintenance work center data for an equipment is stored ...I searched in EQUI/EQUZ ..but could not find ...PP workcennter is there but Maint workcenter is not found in these tables

Hi,
EQUZ-GEWRK is the work center on organization tab
ILOA-PPSID is the work center on location tab
In each case the work center is stored in a internal format. To find the actual work center / plant, find the CRHD record where OBJID field contains that internal number.
-Paul

Similar Messages

To find 'Maintenance Work Center' for Equipment (without Production order)

Hi,
I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]

I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay

Where can i find Main work center field value in il03 transaction ??

Hi experts,
Where can i find <b>Main work center</b> field value in il03 transaction.
Iam looking for the table from where that value will be filled.
thanks
Suresh

Hi anji reddy,
No that filed is not avaiable in that . can please tell some other soulution ...
ASAP...
thanks,
Suresh

Work Center in equipment master

Dear All,
We have created equipment master for 1000 palnt and then assigned work center belongs to 1100 palnt.System accepted 1100 plant work center.My requirement is plant number and work center palnt must be same.

You will need to develop something to stop this occuring.
The the user-exit link at the top of this forum
PeteA

Tables for routing (for work center)

hi friends,
I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
i try to get result by using link with PLPO and PLKO.
in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
kindly can anybody tell me how to work center.
thanks & regards
Bhupinder Singh Kaler

Hi Bhupi kaler,
try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
Best regards,
raam

Tables to retrieve work center for target costs

Dear all,
currently i developing a report which requires me to display the work centers and their target and actual hours and costs. I tried using production order link tables but they only show work centers that are related to planned costs. May i know which tables can i refer to, in order to retrieve work centers that contribute to the target costs?
Thanks and Regards
YM

I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay

Table Link for EQUNR (Eqpt Number) and GEWRK (Main Work Center)

Hello,
I need to fetch the main work center from equipment master. I need a direct table link between the equipment number and mainwork center. We are getting a link of equipment number (EQUNR) to work center (ARBPL) and a link of work center (ARBPL) to main work center (GEWRK). But the problem with this scenario is - main work center is not getting fetched from equipment master once work center is missing.
We want a direct link through some table between EQUNR and GEWRK.
Puneet

Hi Puneet,
Appreciate your problem !
Many a times in such a situation (which I presume exists where no direct link is available between fields); we have 2 clear cut approaches -
Approach 1:
Develop a SAP Query, Functional Area/Infoset, and User Group ( using T code :SQ03,SQ02,SQ01 respectively )
While developing Functional Area feed in these 2 tables (Table 1- equipment number (EQUNR) & work center (ARBPL) and Table 2 - work center (ARBPL) to main work center (GEWRK) with work center (ARBPL) as the Primary Key- bridge to join these 2 tables.
In SAP Query Development; you may take Plant as the Selection Field or any other field as per business requirement to make a search in the query.
Now when you execute this query, you will get a complete Download of (EQUNR),work center (ARBPL) and main work center (GEWRK) in one table.
For SAP Query, you may also approach your ABAP Team Member. This is a cleaner approach than the other one.
Approach 2:
Take SE16 download of the Table 1 and Table 2 and join them in Excel (using vlookup if required).This approach is however limited to the data volume that you have to process.
Please let me know, if you get stuck !
Thanks,
RAVI.

How to find work center in REM from the material Documnet number

Hi ,
We want to develop a Z report for the repetitive manufacturing cycle. Please let me know the logic how to get the work center from the material document that is posted after backflushing MFBF tranaction.
I will elaborate it little further. From the material document number that is genearted out of confirmation from that document no how can I find the work center so that we can so show the throughput of each work center.
Please avoid standard transaction of MCRP etc.
Thanks & regards

Dear Kumar,
I'm not sure whether you can get the work center details,but you can get the production version number from you can get the
rate routing details.
Give a try by passing the document no to table BLPP and get the document log number and pass on the document log number to
table BLPK,by which you can identify the production version.
Also give a try using this FM,RM_DISPLAY_AFRU_REM,I guess you can get the exact work center details from here.
check and revert back.
Regards
Mangalraj.S

PP work center capacity and link in Equipment master

Dear All
My client has five equipments which he is clubing them into one work center with five capacities. In equipment master i have given for respective equipments i have given PP work center locations but when i create a maint order for one equip then in planning the capacity avalability is affecting the entire work center for ex if the total work on one equip is 12 hrs then only 8 hrs of capcity should be deducted for to day and 4 hrs for tommorow but in plannig all 12 hrs are getting deducted in todays capacity itself.
Pls give some inputs from your experiances
Thanks and Regards
Pankaj

Hi,
Even if we have more than One Equipments in the same work center, PP-PM integration will work.
This is the standard scenario in any Process Industry or in case of an Assembly line of a Automobile manufacturing industry.
So it should work. Please check the following points again,
1. Assignment of Work Center to Equipment Master
2. System Condition - '0' Not in Operation in Both header as well as against Individual Operations (in Work Order for that Equipment)
3. Work Order has been released.
4. Same Work Center is used in Routing and the same is Planned for a period.
If we have all the above points right, then while dispatching the Production Order system should show the Period of block and should shift/plan the PO accordingly.
Regards
Sam

Urgent ! Help in linking Work center to goods movement

hello,
i need help in finding the work center for the goods movement in AUFM. The goods movement AUFM table shows all the goods movement entries but i want to tag it to the corresponding work center. i found out a way to tag it. by linking AFKO - RESB - AFVC - CHRD. But the problem is that if the material on the production order is the material that is finally produced, i cant find a work center for it. Because this material has no entry in the RESB table.
Any suggestion would be highly appreciated.
hey everyone
is there a way to have the VORNR field connected to the AUFM goods movement. this will solve the problem of linking the work center . So if someone knows how to link the AUFM entries with the respective VORNR activity ? Please give suggestions.
thanks
Laura.
Message was edited by: Laura. 3:20 PM
laura s

Laura,
Goods issues are linked as you described because components consumed by a production order have reservations (RESB) and are assigned to an operation (AFVC). Goods receipts, on the other hand, do not have reservations and therefore don't have this link to the work center.
If you are using automatic goods receipt, then one of the operations in the production order will have a control key set up for automated goods receipt (PP03 is the standard, and it's usually the last operation). The business would likely see this work center as being logically tied to the goods receipt of the produced material.

Work Center Creator List

Hi Experts,
How to find out Work Center Creator's list by std SAP Transaction (one by one or in mass)
Regards,
VNG

Dear VNG,
Check the table CRHD to find the log details,in case in OP40 if for the work center category the check box is included for
change document means then check this report CR10.
Check and revert back.
Regards
Mangalraj.S

Work Center Capacity Intervals

HI,
Where can I get the work center capacity interval dates i.e. valid from, valid to and corresponding week days that are being populated in the table control when you follow the following path in transaction IR03->Enter Work Center and Plant-> Press Enter->Go to Capacity Tab-> Press Capacity Button on the lower left hand corner->Press Intervals and shifts
My requirement is to calculate the weekly capacity of a work center. I have to find the valid interval for current date then find the number of working days in this interval so that I can use it in calculating the weekly capacity.
Regards,
Bharat.

I de-bugged the main program behind IR03 and found out that the Valid-from-date is being calculated during runtime for all the records from table KAPA for given work center KAPID.
Anyway thank you all who cared to check the thread.
Regards,
Bharat.

Read Routing and work center details from transfer order

Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank you

I have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE

Work Center wise actual activity information.

Dear All ,
We have requirement of Z report creation for cost center wise work center wise actual activity report . But we are unable to find work center and actual activity line item wise link up in any table for development of above report.
So please provides us more information by which we can develop the above report.
Thanks & Regards
Shri

Hi , the link of Cost center and work center are -
Cost center - Object Id - CRCO table . Object Id - Work center - CRHD.
I hope this is sufficient for your report.
Regards
Ranjan

Change log for work center data

Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
Varun

Hi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun

Table to find maintainence work center in equipment

Similar Messages

Maybe you are looking for