Table to retrieve sales orders per sales area and BP name

hi,
I am looking for tables or reports where I can retrieve business transactions base on per sales area and / or BP's ex. name of the BP's.
the crmd_order_index contains BP number but it contains both header and items of the orders, is it possible to find the total amount of header grouped by BP in SAP Query ?
Thank you.
Benj.
Moderated: Please use the search before posting.
Message was edited by: Andrei Vishnevsky

Hi Jerome,
I think you can use the table CRMD_ORDER_INDEX. Just that records that have same header and item guid are related to header and the ones that have different item guid and header guid are related to item.
Or am I missing something?
Regards,
Niraj

Similar Messages

  • Material wise Sales area and customer master

    Hi,
    Suppose I have a plant 4002, if i want to see all the material of plant 4002 then i can see those to following MM60 transaction code but if i want to see a particular material and that material is belongs to which sales area and which customer master then how it could be possible .
    Regards
    Jibanjyoti

    Hi,
    You cannot see a material on customer basis unless it's MTO scenario, still try in t-code MB52.
    Otherwise try in table level as suggested above.
    Reg,
    JJ
    Edited by: Jagsap on May 26, 2011 2:01 PM

  • Sales Area and Sales document type

    Hi Professionals,
    I like to clarify if the following is correct:
    1. Sales Area Must Be assigned  to Sales document type.
    regards
    John

    Hi John,
    1. Sales Area Must Be assigned to Sales document type
    -as far as the logic for this goes ,
    its main relevanmce  is to limit the sales document type to the sales area is that the end user does not create a sales order ,
    for another sales area in your sales document let for ex-
    there is a sales area for whole sales and one for retail.
    now you have configurerd the ywho sales doc type for whole sales- sales area and yret for retail sales area.
    now if the user creates the ywho sales order in retail sales area there will be process related problems for despatch guys so in order to limit this error and hassle, there are the ales area specific sales document types and can be configured as earlier told by gurus
    revert if helpful
    Mohit Singh

  • Sales area and sales doc

    Hi
    how can I configure the system where all sales document type can be allowed for all the sales area. and this means i dont require to assign sales area and sales doc type into OVAZ.

    Hi
    Yes, you are right.
    Check the img activity documentation in SPRO under "Assign Sales area to sales doc types".
    Assign Sales Area To Sales Document TypesI
    n this menu option, you allocate the allowed order types to each sales area group.
    You do not need to make any entries at all if all the sales order types are allowed for each of your sales areas.
    If you wish to check allowed sales document types, you must set up common sales areas. This means you must define common sales organizations, common distribution channels and common divisions. If, for example, you have define common divisions, then you must also define common distribution channels and sales organizations.
    Regards
    Madhu

  • Sales area and sales office not displyed in bp

    Hi all,
    i'm new to crm , when i'm creating BP i'm not getting my sales area and sales office data in BP sales area data tap. Please provide me solution for this issue.
    Thanks and regards
    kesav

    Hi prassana,
    Thanks for your reply. I have maintained my org model and maintained attributes, country  in org units and i have checked sales scenario bust still my sales area not determined in my bp level. i wanted to know where can i check org determination?, Please give me any another solution for this issue.
    Thanks and regards
    kesav

  • Sales area and Pricing

    Hi
    I have an issue where we have worked with few sales areas and different pricing procedures, Now we have to bring all sales areas to one sales area and different pricing procedures to one pricing procedure.Please throw some light on this issue where I can have some solution.
    Thanks in Advance,
    Kanna Palle.
    Edited by: kanna palle

    Hi Kanna,
    In my point of view pricing are recorded in condition record.
    so if you want to combine all the pricing procedure then i dont this so this is possible.
    What you can do is create new pricing procedure and add all the condition types which are active.
    so that you can get the pricing procedure of your requirement.
    hope so this might work but i dont know how to combine pricing procedure.
    And if you want to combine your all sales area to one sales area
    then you can use combine sales organisation and combine distribution channel process.
    you need to create new sales organistion and distribution channels
    and do the assignment of both these with one division.
    then go to VOR1 and VOR2 to combine all your sales area to one sales area.
    hope so this might work for sales area combination.
    please post your reply whether it works or not.
    regards
    Raj.

  • Tables for linking sales organization and customers

    Dear Sir,
    I am Nikhil. I want to know the tables for linking sales organization and customer.
    Please do help me.
    Regards,
    Nikhil

    you mean table KNVV?
    please post more details
    A.

  • Tables in CRM- Sales Area Data

    Hi,
    We have downloaded the Customer Master from R/3 to CRM system. Initial Load was successful and delta is also working fine. We are getting the R/3 sales area data in CRM system when we open a BP.
    But here our issue is, we could not locate the sales area data in any of these below CRM tables -
    CRMD_ORGMAN
    CRMM_BUT_FRG0081
    CRMM_BUT_FRG0080
    This data we require for BW purpose, Can anyone help me where I can get this data?
    The Bdocs coming from R/3 to CRM contains complete sales area data.
    Thanks&regards,
    kalyan

    It depends on the tab you have maintained for sales area.
    CRMM_BUT_LNK0011 holds the sales area data for the sales tab on the screen.
    CRMM_BUT_LNK0021 holds the sales area data if the shipping tab is maintained.
    Similarly if the billing tab is maintained, you ll find the data within the CRMM_BUT_LNK0031 table.
    I hope this helps.
    Regards,
    Gaurav Gera

  • Table for BP sales area in CRM 7.0

    Hi Experts,
    This is regarding the BP tables in CRM where assigned sales area information is saved. I could not able to figure out in which table I can see only assigned sales areas. I have checked tables like CRMM_BUT_LNK0140, CRMM_BUT_LNK0141, CRMM_BUT_LNK0010, CRMM_BUT_FRG0080, CRMM_BUT_FRG0081. In these table I can see all the sales areas in the systems for a single BP. But I am looking for only maintained sales areas for a single BP.
    Could you please advise in which tables I can find this info and how to pull exact information.
    Thanks in advance!
    Regards,
    Kumar Budidagaddapalli.

    Sincere Vishal,
    DB CRMV_BP_FRG0140 returns Sls group, office and organization, but no Sales area. I would simply like to check sales area for two organizations.
    Example (how it should be):
    -sales organization: 1, sales area: blank
    -sales organization: 2, sales area: 1000
    I can find sales organization in different table, but can't find sales area, even in Tx BP (under sold-to-party role, Sales Area Data section. Any suggestions?
    Regards,
    Matej

  • Table relation between Sales Organization and Profit centre

    Hi everybody,
    I hava a question:
    How do I know wich Sales organitzation (VKORG) belongs to a Profit centre(PRCTR), which table relation do I need to do to find it, or from wich table do I get this relation because I haven't found anything.
    I've been asked to get the Profit Centre given a Sales Organization.
    Thanks a lot!

    Hi Moises,
    Firstly get the Sales Order Number (VBELN) and Sales Organization(VKORG) from VBAK.
    Now based on the the Sales Order Number (VBELN) get the Profit Center(PRCTR) from VBAP.
    Now you can relate Sales Organization and Profit Center.
    Regards,
    Chandra Sekhar

  • One material extention to different sales areas and Act .***.grps?

    Hi,
    I have one material for which i need to extend the material to different distribution channels,divisions and account assignment groups in this case can i extend one material to different sales areas as mentioned above or i need to create one more material with same material master data except the sales view data?
    thanks.

    I have extended the same material to 2 different distribution channels and divisions but when iam checking in display view of MM for different distribution channels divions should be different as i have given divisions also different but in my case the last saved division only appearing for both different distribution channels.
    Second thing in MVKE table iam not able to find the division field(SPART)?
    Is iam missing any setting?
    Thanks!

  • Relation between sales area and Taxes

    Dear All,
    I have come across an issue wherein for the customer, the Excise duties and Sales Tax flows in one Sales Area but does not flow if created in another. The Sales Org is different in both Sales Area, the material sold is same.
    Can anyone highlight where the problem should be or is there any customisation left out which needs to be set for the values to flow.
    Thanks & regards,
    Karthik.

    Dear All,
    Thanks for you inputs.  The issue is solved.
    The reason for the issue was that the user had not maintained the Deletion indicator for the Condition type JECS and JA1X due to which the system was not fetching the data from the Tax procedure via Tax Code. i.e. the Condition type in pricing procedure overwrites the value determined from the Tax procedure.
    Since these conditions are maintained at the Sales Organisation level the value was flowing in one Sales area whereas not in other.
    Regards,
    Karthik.

  • 3 sales area and single customer- reg

    If we have 3 sales area & single customer, how to extend one customer to 3 sales area? asked by IBM.
    solutions are highly appreciated!
    regards
    KR

    hi
    For example u have 3 sales areas as
    1000 sales organization 00,01 and 02 are respective distribution channel and division
    1000/00/00
    1000/01/01
    1000/02/02
    First u have a customer by number 1000 in 1000/00/00 sales area
    now goto XD01 create customer centrally
    Specify the account group
    specify the customer number number for whom the data has to be exetended
    specify the company code
    specify the new sales area in the above case it is 1000/01/01 and 1000/02/02
    in the refernce fields specify the same customer number1000 and the sales area like 1000/00/00
    like this you have to extend the customer to all the required sales areas
    regards
    prashanth goud

  • Which table has the sales price and Art.no?

    Hello,
    I want to export the sales prices of parts to a excel,so who can give me the table which includes this field?
    Thanks in advance
    Helai

    Thanks All
    In A005 I get nothing after a certain part no inputted
    In A004 I get the several CondrecNo ,but no customer no.linked in this table,so I don't know which customer will get what price when I pass the CondRecNo to KONP,although I know it already includes all sales prices
    So still can't get the "NETPR" for a certain part.
    Any advices for a query for getting sales prices for a certain part
    Best Regards,
    Helai
    Edited by: lai he on May 6, 2009 7:17 AM

  • How to post cost of goods sold to io per functional area and account determ

    1. We create a sales order with reference to a revenue IO with functional area ABC01.
    2. We create a delivery document on the sales order and goods issue XYZ.
    3. We expect the cost of goods sold for the coal to hit an existing IO with functional area ABC02 based on account determination for XYZ.
    4. Instead we see both the revenue and the COGS hitting the revenue IO on the Sales roder.
    5. For now, the accountants responsible for those companies have been making journal entries all along to correct the postings.
    Please advise what needs to be done for step 3 to happen so that the extra step 5 need not be done.
    (IO - internal order)
    Thanks,
    Venkat

    What is the IO you have assigned in the Sales Order please?
    Just check the Sales Order - Account assignement, so that you can able to change if there is a different IO.
    System won't pick up IO automayically until unless you secify in Sales order to done OKB9 settings.
    Chek the above
    Thanks

Maybe you are looking for

  • Image viewer with interactive coordinate response

    Hello! I'm looking for an image viewer on Linux which has the ability to show coordinates interactively. Is feh or display (imagemagick) able to do that? Or any other applications? Thanks!

  • Help with Black Screen?

    My iPhone 4 froze and went completely black. The phone will still ring but the screen remains black. I tried plugging it in to the USB and turning it on, but there was no luck!

  • I can't install Office 2011 on my Mac Air?

    So I Format my Macbook Aur Yesterday so I decided to download the Microsoft Office again and a message Office 2011 14.3.9 Update can't be installed on this disk. A version of the Software required to install this update was not found on this volume k

  • Using ALEAUD for application reply? or build a new IDOC ?

    Hello. I have a scenario where a 3rd party sends me a message, that I map in my PI to an ACC_DOCUMENT IDOC. I need to send a reply on the ACC_DOCUMENT IDOC after processing it. The reply must contain several applicative values from the IDOC - so that

  • X200 cannot sleep / shut down

    I have a X200 which is hardly 2 months old. I'm running Windows 7 64-bit, 4GB of RAM. The issue I have is that it does not sleep (standby) or shut down. It just stalls at a blank screen (for sleep) or the shut down screen. The one thing I notice is t