Takeover from EP5.0 to EP7.0 SP8 (Iviews & Theme)

Hello all,
I am quite new to Enterprise Portal.
I just set up the EP 7.0 with SP8, Roles, Worksets, Pages, Iviews. Everything is running fine. I was even able to take over the KM of our old EP5.0 via offline ICE export & import.
The old portal comes also with some custom iviews and an custom portal theme. No Idea who design and programmed it.
Do you have some hints and/or how to's to take over the theme and especially the custom iviews and their data - or are they not compatible with EP 7.0?
Thank you very much for your help and hints.
Philipp

you cannot directly upgrade from EP5 to EP7 .
My suggestion is better go for fresh EP 7 installation and manually migrate the cotent from EP 5 to EP 7. This scenario is better if  the content is not so complex.
Otherwise you need to upgrade to EP 6 server and then upgrade to EP7 server.
You can develop custom applications with more functionalities than ep 5.
You can check the advantges of EP7 over EP5
http://rahulursportal.blogspot.com/2008/01/flavor-of-ep.html
Raghu

Similar Messages

  • KM content migration from EP5. to NW2004s

    Hi all,
    Can you tell me if it’s possible to migrate KM content from EP5.0 to NW2004s?
    I know that the only scenario supported by SAP is the migration from 5.0 to 6.0 and then upgrade to NW2004s.
    But are there any tools that could be use to perform this migration directly from EP5.0 to NW2004s?
    Thanks and Best Regards,
    Paulo Ruivo

    Hi Paulo,
        As suggested  by SAP recommended way is to migrate from EP5.0 to EP6.0 then upgrade to EP7.0.
    No ,there are no standard migrating tool for migrating content as the way u want.I am afraid you may have to do it manually.
    Regards
    Rani A

  • KM content Migration from EP 5 to Ep7

    Hi There.
    We are trying to migrate Km content from EP5 to EP.. i know that this can be achieved through ICE. and i have seen couple of blogs also but i am still not able to get any step by step info..  along with all pre-requisite..
    Can you please share your experience and methods in KM content migration using ICE.
    Thanks for your help.
    Rgds

    Sudhir,
    this <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/38effdbf-0d01-0010-c3ad-9d9547a492af">How To ... Distribute KM content using the ICE protocol</a> should still make it..
    rgds

  • ConfigurationException while migrating from EP5 SP20 to EP6 SP19

    Hi,
       I'm migrating content from EP5 SP6 to EP6 SP19 and am following the document "Migration of SAP Enterprise Portal 5.0 to NetWeaver '04". All support platform plugins checks passed.
    However when i start migration: i get the message
    Error#1#/System/Server#Plain###Error occurred while initially starting application sap.com/tcmobileadminea:Application sap.com/tcmobileadminea cannot be started. Reason: it has hard reference to resource tc_SL_SDM_Client with type library, which is not active on the server.#
    #1.5#0013724BF3C7005F000000080000138C000428E24344A4C9#1170852163146#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#37##ctsgvcsd08_J2E_31510050#Administrator#697221d0b6a811dba6230013724bf3c7#SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1#/System/Server#Java###could not display message
    [EXCEPTION]
    #1#com.sap.portal.upgrader.ConfigurationException: Configuration not yet tested , process was not started
         at com.sap.portal.upgrader.UpgradeProcess.isConfiguredOk(UpgradeProcess.java:2150)
         at com.sap.portal.upgrader.ui.UpgraderUI.doContent(UpgraderUI.java:195)
    Any assistance to resolve this would be of great help.
    Thanks
    Sumathi

    After application of Java SP20 I have the same error:
    "Error occurred while initially starting application sap.com/tcmobileadminea:Application sap.com/tcmobileadminea cannot be started. Reason: it has hard reference to resource  tc_SL_SDM_Client with type library, which is not active on the server.#
    On our J2EE we are not able to find the "tc_SL_SDM_Client " service or library and the property files seems to be ok.
    Before the application of Java SP20 the J2EE was working fine.
    DO you know in which SCA/SDA  the tc_SL_SDM_Client  is supposed to be ?
    regards

  • Moving away from EP5.0

    Hello,
    Please could someone assist with advise on our scenario.
    We have a SAP EP5.0 installation that provides an external interface to few handful transactions on SAP R/3 4.6 - via the RFCs.
    But we are now in a situation to move away from EP5.0 while retaining the SAP R/3. The solutions being considered are re-building these few EP screens over the Java, deployed over a J2EE engine and connecting to SAP R/3 via JCo. Is it considered a right solution? Do we really need to buy any SAP Adapters? or SAP JCo is enough?
    Please pardon my ignorous.
    Thanks.

    Hi Jagjit,
    Yes, you can use JCOs in order to serve your purpose.
    But for the right JCO that goes with your EP version, please make sure you go through these SAP NOTES :  549268 and 1077727
    Also, refer to this help doc on how you can make your JCO work.
    http://help.sap.com/saphelp_nw04s/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/frameset.htm
    Architecture
    http://help.sap.com/saphelp_nw04s/helpdata/en/8b/91222fa9e611d6b28f00508b6b8a93/content.htm
    Explore more on this and you would be good to go.
    This is where you can download your JCOs
    https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463649
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Difference between Ep5.0 and Ep7.0

    Hi ,
    Can u tell the Difference between Ep5.0 and Ep7.0(Briefly)
    and send me some related docs.
    Regards,
    Girish

    Girish,
    You can check that posted by Rahul in here.
    http://rahulursportal.blogspot.com/2008/01/flavor-of-ep.html
    Just click on the image to enlarge.
    Good Luck!
    Sandeep Tudumu

  • How to set a cookie in the browser from an html page called via an Iview

    How to set a cookie in the browser from an html page called via an Iview
    Hello all,
    I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
    Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
    Is there a way to allow cookies to be set from an embedded page in a url iview??
    You will make my day if you know!
    System: EP7 SP13
    Kind regards
    Alex

    Hi,
    Check this:
    http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
    Cookie Basics
    Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
    These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
    For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
    Regards,
    Praveen Gudapati

  • Hi how do i delete voice memos from my iPhone 4 after I have synched them with iTunes?

    Hi how do i delete voice memos from my iPhone 4 after I have synched them with iTunes?

    Hi James thanks so much for your reply
    What I was trying to do though was to mass delete the voice memos from the phone, and I was told that one can do that via iTunes. Problem is that when I do open iTunes, I am not able to locate a TAB thats says ON THIS IPHONE
    I was told that one could click on this and then select multiple Voice Memos and delete this way.
    Thanks again for your assistance

  • I downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing..... please help!

    i downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing.i even restarted my ipod several times but it doesnt seem to work....i tried to delete and re-install the apps but that too doesnt seem to work... and while syncing,the apps are shown in my ipod and after the ipod is synced the apps disappear... dunno wat to do .................please help........

    Do you have Restrictions set that prevent adding the apps? (Settings>General>Restrictions).
    What happens whenyou tru to download the apps directly to the iPod.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

    How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

    How can I delete EVERY THING off my Mac and have it like new?
    Boot from the software install DVD and do an "erase and install" when prompted.

  • How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    To sync photos from a Mac or Windows PC to your device using photo applications
    Make sure you have the latest version of iTunes installed.
    In iTunes, select your device's icon in the Devices list on the left.
    Click the Photos tab.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
    If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
    Click Apply.
    To sync photos from a folder on your hard disk to your device
    Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
    In iTunes, select the device icon in the Devices list on the left.
    Choose "Sync photos from."
    Select Choose Folder from the pop-up menu and choose your main image folder.
    Click Apply.

  • TS3577 I want to erase the new Garage band and convert to my old one. As soon as it downloaded, I Lost all of my songs from the previous Sessions,HOW DO I GET THEM BACK?

    I want to erase the new Garage band and convert to my old one. As soon as it downloaded, I Lost all of my songs from the previous Sessions,HOW DO I GET THEM BACK?

    MacBook Pro, iOS 7.0.6
    Your signature lists both, Mac and iOS device - are you asking about GarageBand on your Mac or your iPhone/iPad?
    If you are asking about the upgrade from GarageBand '11 to GarageBand 10.0 on your Mac, the old GarageBand version should still be installed. The installer will have moved GarageBand '11 to a separate folder "GarageBand 6.0.5" in your Applications folder. Open this folder and click "GarageBand".  Does this version still see your old projects?  If not, type ".band" into the Spotlight searchfield in the upper right corner of your screen. Does that sfind your missing projects?
    If you are asking about GarageBand on iPad/iPhone, there it is not possible to restore the previous version after you upgraded. And I do not see, how this upgrade could have deleted your projects. Have they completely vanished, or can you not open them any longer? If your projects have vanished, restore your device from your backup: See:  iCloud: Backup and restore overview
    -- Léonie

  • My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

    My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

    shannon284 wrote:
    My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?
    OK, let's come back to the original issue; how are deleted messages retrievable?
    First, is the account set up as an Exchange account or a POP account? I'll assume it's Exchange. If it were POP the answer is obvious.
    If it's an Exchange account are you deleting the messages from the phone or from some other computer? If you are deleting them from another computer they will not be removed from the Trash folder on the phone until the phone next syncs AND the Trash folder is opened. But this will take time. You can force the Trash folder to sync in near real time by going into Settings/Mail,Contacts,Calendars, tap on the Exchange account, tap on Mail Folders to Push and check "Deleted Items". Note that doing this will result in increased data usage and reduced battery life.
    If I haven't described the situation tell me what assumptions I made that are incorrect.

  • Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

    im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
    this says it all..

    Welcome to the Apple Community.
    Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
    Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

  • How do I stop my new mac book pro from opening all my old emails and flasing them in the top right corner?

    How do I stop my new Mac book Pro from opening all my old emails and flashing them in the upper right.

    Copy the entire iTunes folder within the music folder on your old Mac to the music folder on your new Mac.
    You can use an external hard disc for the transfer, or you can connect the computers together using Firewire Target Disc Mode as explained here:  http://support.apple.com/kb/ht1661

Maybe you are looking for

  • Saveindg a String in a .txt-File

    Hello, I want to save a String to a .txt-File, that is placed in a certain directory. How can I Do that? Tank you very much! Greeting from cologne! Marcel

  • Compiling a programme with third party package help

    Hello all, I am writing a programme with a third party package (freetts.jar). The jar is is the classpath of my 2003 server and it compiles ok. import com.sun.speech.freetts.Voice; import com.sun.speech.freetts.VoiceManager; import com.sun.speech.fre

  • Null Cipher/Identity Alias

    I am using Keytool provided by J2SE. Is there any way to create a "identity" key pair. Basically you put in Unciphered text run the routine and you get back out Unciphered text. This is just for testing purposes. Any help, even a point in the right d

  • How can copy master inspection characteristic from plant1 to plant2

    Now I have 2 plants I already created all master inspection characteristic that i need by QS21 for plant1 Is there any way I can copy all master inspection characteristic from plant1 to plant2 ?

  • Imac G5 (third generation) will not continue start up

    Hi all, Hope someone out there can help me out with my imac. I've got an imac G5 (third generation), the model just before the intel based imac came out. I had just done a mac os X software update (the most recent), then my computer re-started (witho