Takes a long time to find wireless network
So for the past few months my (Santa Rosa) MBP will take an extremely long time to find a wireless network. This happens both at home and other places where I have connected in the past and am wanting to use a remembered network. It can take as long as two and a half minutes to connect. If I click on the airport icon in the menu bar, then it says it's scanning for networks during this time.
Usually if I create a new location then the problem will go away but then seems to come back. The problem also persists if I use a different user.
I've repaired permissions, done a disk repair and even used Diskwarrior. I miss instantly finding wireless networks. It's a small inconvenience, granted but was hoping to get this fixed once and for all.
Anyone have any suggestions of things to try? Thanks all.
ldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk
Similar Messages
-
Takes a long time to find and connect to wireless
I've had this problem for a long time and have done extensive research. On this Thinkpad Edge bought from Office Depot a few years ago, every time the laptop wakes up from Sleep, it takes one and half to two minutes to find the wireless signal. No other devices in the house have this problem. I've turned off all kinds of power saving features to no avail. Any advice is appreciated.
ldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk -
Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences Itunes can't find them and I have to direct it to every song- a little ! pops up next to the song and a dialogue box says Itunes can't find it so thn i have to manually search for it - I have a months worth of songs on there so this will take avery long time - any ideas on what's up?
nellydee wrote:
Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences
That's not how to do it. You don't move stuff then set the iTunes prefs > Advanced.
Once you move the /iTunes/ folder, hold Option, launch iTunes and select Choose library... and select the ITunes folder on the external.
This will use the iTunes library file in the iTunes folder you moved.
Don't change iTunes prefs > Advanced. -
my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Lion takes long time to find free space after emptying trash
After emptying the trash, I've noticed that Lion does not see the additional free space until after doing a reboot, and even after that it takes a long time for it to find all the new free space. Anybody know what's wrong with the trash system?
Absolutely nothing is wrong with it. See Missing disk space in Lion.
-
Error,13030 and others! unable to download, takes a long time to get to any page.
# Question
Error,13030 and others: Email -!Sending taking a little longer than usual...
We'll keep trying and let you know when it's been sent.
I am also unable to download (I use Send Space and Mega Upload), plus it takes a long time to get to any page, I have to Reload several times and sometimes it still does not work!
I'm using a PC, XP professional -
I was away for 9 days came home to my computer not responding. I am using the free version of AVG security and read the instructions in the Mozilla help Re: Firewalls, changing the AVG settings removing Mozilla and then adding it back in. However I checked for updates on AVG none were available and the instructions Mozilla has are for a version of AVG that I do not have. I am using 8.5 and I think the instructions were for 9.0. At any rate I am stuck, and desperately need to get this figured out! I hope that this is enough information for someone to point me in the right direction.? Your help is be greatly appreciated. Thank you in advance! Charismeldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Time Machine/Time Capsule backups successful, but take a long time
I purchased a 512GB Time Capsule about a year ago. Since I got it, backups have been successful, but very slow. An average backup takes about 40-50 minutes, usually for less than 20 MB transferred.
Here are a couple summaries of recent backups (see end of post for full logs):
BACKUP 1:
11 minutes to detect if pre-backup thinning was necessary
18 minutes to copy 281 MB
5 minutes to copy 5.4 MB
4 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
There were no error messages.
BACKUP 2:
4 minutes to detect if pre-backup thinning was necessary
12 minutes to copy 15 MB
5 minutes to detect if pre-backup thinning was necessary
15 minutes to copy 3.8 MB
1 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
This time, there were error messages about "Unable to rebuild path cache for source item. Partial source path:"
My Time Capsule is placed about 5 feet from my laptop, with no obstructions between them. I don't think it's a wireless speed issue, because I use the Time Capsule as my router, and my connection to the net is fine. Also, operations that don't require wireless connections, like detecting pre-backup thinning, also take a long time.
Does anyone have any idea what might be going wrong to cause my regular backups to take so long?
BACKUP 1:
14/09/09 2:09:47 PM /System/Library/CoreServices/backupd[18612] Starting standard backup
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Backup destination mounted at path: /Volumes/turban
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 2:21:15 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 860.3 MB requested (including padding), 280.02 GB available
14/09/09 2:39:05 PM /System/Library/CoreServices/backupd[18612] Copied 12159 files (281.3 MB) from volume butternut.
14/09/09 2:39:08 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 529.5 MB requested (including padding), 280.02 GB available
14/09/09 2:44:18 PM /System/Library/CoreServices/backupd[18612] Copied 11775 files (5.4 MB) from volume butternut.
14/09/09 2:48:43 PM /System/Library/CoreServices/backupd[18612] Starting post-backup thinning
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-132947: 280.02 GB now available
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Post-back up thinning complete: 1 expired backups removed
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Backup completed successfully.
14/09/09 2:50:18 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine disk image.
14/09/09 2:50:22 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine network volume.
BACKUP 2:
14/09/09 9:09:46 AM /System/Library/CoreServices/backupd[15833] Starting standard backup
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Backup destination mounted at path: /Volumes/turban
14/09/09 9:10:07 AM /System/Library/CoreServices/backupd[15833] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 9:10:10 AM /System/Library/CoreServices/backupd[15833] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 9:14:06 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 542.2 MB requested (including padding), 280.02 GB available
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:26:00 AM /System/Library/CoreServices/backupd[15833] Copied 1223 files (15.3 MB) from volume butternut.
14/09/09 9:31:35 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 527.5 MB requested (including padding), 280.02 GB available
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:20 AM /System/Library/CoreServices/backupd[15833] Copied 11336 files (3.8 MB) from volume butternut.
14/09/09 9:47:06 AM /System/Library/CoreServices/backupd[15833] Starting post-backup thinning
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-082428: 280.02 GB now available
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Post-back up thinning complete: 1 expired backups removed
14/09/09 9:49:15 AM /System/Library/CoreServices/backupd[15833] Backup completed successfully.
14/09/09 9:49:19 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine disk image.
14/09/09 9:49:25 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine network volume.peterjm wrote:
I checked all of the steps in #D2 of the Troubleshooting Guide.
One other thing thing you might try, is a +*Verify Disk+* (not permissions) on your internal HD. That will not take anything like 40 hours! If it reports problems, you'll have to boot from your Install disc and use it's copy of DU to repair it. Post back if you need to do this but aren't sure how.
I think it's very fishy that Repair Disk took 40 hours -- it seems like any operation that touches the hard drive on the Time Capsule takes a long time. Maybe the hard drive is having problems? What sort of problems could a drive have that would make everything VERY slow, but still successful?
Try connecting via an Ethernet cable; see what effect that has. Everything should be faster, of course, but not wildly. Just as an example, I'm doing backups to a USB hard drive via my Airport Extreme, about 15 feet from my iMac. When I first started that way, I did a full backup via Ethernet (about 21 gb/hour), then erased it and ran again wirelessly (about 12 gb/hour).
Even 5 feet apart, you may have some sort of interference or other communications problem; if Ethernet is many times faster, then you may need to have your TC and/or wireless card examined. -
Exchange 2013 mailbox takes a long time to connect with Outlook 2010
We just installed a 2013 CAS/Mailbox server in our Exchange 2007 environment and are running in coexistence while we migrate users over. So far I have only moved one 2007 mailbox over, a new account used for testing. Everything is working fine, OWA,
ECP, ActiveSync, etc... When connecting Outlook to a 2007 mailbox autodiscover takes a couple seconds and Outlook opens fine. The problem is when connecting Outlook to a mailbox on the 2013 server. Autodiscover takes about a minute before it finally finds
the settings and the mailbox takes about 30 seconds to open everytime. It generally times out, I click retry and the mailbox opens. Once in everything is good but the initial loading always takes a long time, double the time when opening Outlook with a shared
mailbox attached. All autodiscover is autodiscover.domain.com, Exchange 2007 is all legacymail.domain.com aside from the components that need to point to 2013. We do not have any certificate issues, well that's not true, at some time in the last couple years
someone applied a 3rd party cert to our domain.com root but not sure if that would cause this issue. Also, these are internal clients we are trying to get going with the 2013 mailbox, not external. I just applied a registry change that helped someone else
out there by disabling IPv6 for all components but that did not work for us MS KB929852. Any suggestions? Right now I am thinking of changing the internalURI for autodiscover to the FQDN of the server but wanted to see if anyone had any ideas.
JeremyHi Angela, thanks for the response. I cannot post links or pictures as my account has not been verified?
The autoconfiguration tests passed, I will paste the xml below. Ping times were all under 1ms. When I entered the IP for the 2013 serve I received errors that the connection to Exchange is unavailable followed by another one that the name cannot be resolved.
I did this test by removing the Outlook profile and creating one manually without Autodiscover. I am able to ping the server by all names from the command prompt.
Our autodiscover.domain.com points to our 2013 server and the name is resolvable both internally and externally. Our certificates cover the internal server name fqdn as well as external names. I am doing all testing in the internal network.
Pinging 2013server.fqdn.com [172.16.xx.xx] with 32 bytes of data:
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Ping statistics for 172.16.xx.xx:
Packets: Sent = 13, Received = 13, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns= removing link for post, points to the schema . microsoft . com ... 2006
<Response xmlns= removing link for post, points to the schema . microsoft . com ... 2006a
<User>
<DisplayName>2013user</DisplayName>
<LegacyDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=91d6299a8d1440e6b80fcc854dc3f860-2013user</LegacyDN>
<AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
<DeploymentId>565c12be-83dc-44c7-a843-37b9bf26b9db</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<MicrosoftOnline>False</MicrosoftOnline>
<Protocol>
<Type>EXCH</Type>
<Server>[email protected]</Server>
<ServerDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
<ServerVersion>73C082C8</ServerVersion>
<MdbDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>webmail.company.com</PublicFolderServer>
<AD>SMS-AD1-SRV11.domain.ca</AD>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<EwsPartnerUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsPartnerUrl>
<GroupingInformation>Acheson</GroupingInformation>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://2013server.domain.ca/owa/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Fba">https://webmail.company.com/owa/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
</Account>
</Response>
</Autodiscover>
Thanks,
Jeremy -
Saved files take a long time to appear on Server or Desktop
We have a network of nearly 40 macs, Panther Server, mostly panther clients but the newer machines are on 10.4.
All of the newer machines exhibit the problem in that files saved to the server or to the desktop take a long time to appear.
It appears to be a refresh issue, as on the server other clients can see the file straight away and locally the files can be seen on the desktop via the terminal.
Force quitting the finder forces the files to appear but this is not a solution.
The clients which have the problem all run 10.4 and the Server is 10.3. The 10.3 clients do not exhibit the same issues.I have also seen this issue at one of my larger clients (50+ workstations).
The issues seems isolated to 10.4.5 or higher. Our workstations with 10.4.2 did not exhibit this problem. It is not an issue with hardware (we have seen this on an iBook G3 and various G5 tower models). Nor does it appear to be server-related: we have seen the issue saving locally with no servers mounted. We have seen the issue when saving from Adobe CS apps, MS Office apps, and from system apps (like TextEdit). Deleting com.apple.finder.plist from the user's home Library and then relaunching the Finder gets relief for a short time but the problem returns soon after. plutil reports the file is OK. The volume directory is fine, the permissions check out, and caches have been purged, to no avail.
Like you, summersault, I am able to see the saved file on the command line, and when my users Force Quit the Finder, the file appears. Other workarounds, like the Nudge contextual menu, do not work.
I have submitted the error via apple.com/feedback and would encourage you to do the same.
Anxiously awaiting 10.4.7...
-B
Mac OS X (10.4.6) -
Mac OS X take a long time before shutting down...
Hi everyone,
I have a problem that I can't explain :
My mac book pro take a long time before shutting down. I don't know why.
When I click shut down, everything works normally.
OS X quit my applications, the dock, the finder...
But it's stay 10 minutes on my desktop background before the logout and finally the shutdown (what's the matter ? what does it do ?).
I don't know what to do to find the problem...
Maybe it's a process but I don't know how to localize it.
What are the minimal processes in OS X (I'll try to find the problem by elimination) ?
P.S. Sorry for my basic English... French native.
Thank a lot for your help !Hello everyone !
It's me d.bertrand (I had a problem with my account...) So I create a news account (sorry moderators) !
I try to fix bugs with onyx but no results.
Here my log files (I shutdown OS X at 11:48 and he really shut down at 12:04... 16 minutes !)
With Onyx I look into the log file... And find that :
SYSTEM LOG
Jul 6 11:48:51 denis-bertrands-computer shutdown: reboot by Den:
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: "/Library/StartupItems/Tablet" failed security check: permissions
Jul 6 11:48:51 denis-bertrands-computer Parallels: Stopping DHCP/NAT daemon...
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: authentication service (508) did not complete successfully
Jul 6 11:48:52 denis-bertrands-computer Parallels: Unloading Network module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading ConnectUSB module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading Monitor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels VM observer thread stopped
Jul 6 11:48:54 denis-bertrands-computer Parallels: Unloading Hypervisor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels Workstation Hypervisor exited.
Jul 6 11:48:54 denis-bertrands-computer Parallels: Shutdown complete.
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: The following StartupItems failed to properly start:
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: /System/Library/StartupItems/AuthServer
WINDOWSERVER LOG
Jul 06 12:04:09 [84] CGXRestartSessionWorkspace: session workspace exited for session 256 ( on console )
Jul 06 12:04:09 [84] loginwindow connection closed; closing server.
Any idea ?
Thanks !
MBP 15" 2.33 / 2GoRAM Mac OS X (10.4.10) -
My iPad air 2 takes a LONG time time to charge
So I recently got a IPad Air 2 and I have used the 10w charger which it came with but it takes a LONG time to charge. In around 1 hour is only goes up around 10% and the charger gets quite hot. Also sometimes it displayed the message,"Not charging," up in the corner where the battery symbol is. Now I got the 12w wall plug charger and it's abit faster and the charger gets hot but not as hot as the other one just warm. I haven't had the message,"Not charging," yet.
Has anyone had the same issue or can help because I don't think It is a battery issue as the iPad air 2 is brand new and I only got it 2 days ago.Mine is a new IPAD Air and I have about 50 apps - the device has been trying to download/sync my apps overnight and it is nowhere near done......I have been trying to do it through Itunes leaving it with the IMAC (syncing computer) overnight but it is nowhere near done......
The IMAC uses a wireless connection for Itunes, etc.....
As of now the IPAD Air is showing that it is downloading but I wonde whether I should shut it down and restart?
The downloads have been going on for about 12 hours..... -
My mac takes a long time to log on, running slow
my imac is running slow & takes a long time logging on, anyone knows why this happens?
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message. -
Lenovo Services/Program takes a long time to start after bootup
It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?No response?
Anyone else on T400 notice this? -
NW2004s takes a long time to start up
I am trying to find out why out NW2004s takes a long time to start up.
We have installed NW2004s SP8 JAVA only to use it as Enterprise Portal with Oracle 10g on SUN SPARC 64. While the shutdown of J2EE is pretty fast, the startup take over an hour and half.
/usr/sap/<SID>/JC##/work/dev_server0 file shows:
Thu Aug 10 15:31:48 2006
4017.515: [GC 4017.515: [ParNew: 104368K->17613K(131328K), 0.0423530
secs] 797893K->711138K(1004800K), 0.0428819 secs]
Thu Aug 10 15:31:50 2006
4019.309: [GC 4019.310: [ParNew: 105165K->17610K(131328K), 0.0762693
secs] 798690K->711134K(1004800K), 0.0767036 secs]
Thu Aug 10 15:34:35 2006
4184.118: [GC 4184.119: [ParNew: 105162K->22685K(131328K), 0.0762199
secs] 798686K->716210K(1004800K), 0.0766811 secs]
and /usr/sap/<SID>/JC##/work/std_server0.out file show entries like:
2051.407: [GC 2051.408: [ParNew: 112475K->25810K(131328K), 0.1614717
secs] 678386K->591721K(1004800K), 0.1619460 secs]
2060.554: [GC 2060.555: [ParNew: 113362K->26687K(131328K), 0.1458862
secs] 679273K->592599K(1004800K), 0.1463431 secs]
2068.742: [GC 2068.742: [ParNew: 114239K->27592K(131328K), 0.1464110
secs] 680151K->593504K(1004800K), 0.1470097 secs]
2077.575: [GC 2077.576: [ParNew: 115144K->28470K(131328K), 0.1545706
secs] 681056K->594382K(1004800K), 0.1550365 secs]
2086.411: [GC 2086.411: [ParNew: 116022K->29505K(131328K), 0.1559618
secs] 681934K->595417K(1004800K), 0.1564804 secs]
2094.803: [GC 2094.803: [ParNew: 117057K->30419K(131328K), 0.1531343
secs] 682969K->596331K(1004800K), 0.1536090 secs]
2103.255: [GC 2103.255: [ParNew: 117971K->31345K(131328K), 0.1602581
secs] 683883K->597257K(1004800K), 0.1620506 secs]
2112.423: [GC 2112.424: [ParNew: 118897K->32236K(131328K), 0.1715456
secs] 684809K->598147K(1004800K), 0.1721748 secs]
2123.276: [GC 2123.276: [ParNew: 119788K->33014K(131328K), 0.1640996
secs] 685699K->598926K(1004800K), 0.1645846 secs]
2132.172: [GC 2132.172: [ParNew: 120566K->33980K(131328K), 0.1673372
secs] 686478K->599891K(1004800K), 0.1678214 secs]
2141.072: [GC 2141.072: [ParNew: 121532K->34784K(131328K), 0.1810283
secs] 687443K->600695K(1004800K), 0.1814991 secs]
2149.693: [GC 2149.694: [ParNew: 122336K->35368K(131328K), 0.1670516
secs] 688247K->601280K(1004800K), 0.1675269 secs]
2158.486: [GC 2158.486: [ParNew: 122920K->36435K(131328K), 0.1756513
secs] 688832K->602347K(1004800K), 0.1761320 secs]
2167.314: [GC 2167.315: [ParNew: 123987K->37497K(131328K), 0.1852015
secs] 689899K->603409K(1004800K), 0.1857250 secs]
2176.397: [GC 2176.398: [ParNew: 125049K->38251K(131328K), 0.1741406
secs] 690961K->604163K(1004800K), 0.1746117 secs]
2185.352: [GC 2185.352: [ParNew: 125803K->39375K(131328K), 0.1920462
secs] 691715K->605287K(1004800K), 0.1925810 secs]
2194.150: [GC 2194.151: [ParNew: 126927K->40253K(131328K), 0.1923566
secs] 692839K->606165K(1004800K), 0.1928781 secs]
2202.884: [GC 2202.884: [ParNew: 127805K->38024K(131328K), 0.2031970
secs] 693717K->607088K(1004800K), 0.2036677 secs]
2211.384: [GC 2211.385: [ParNew: 125576K->38851K(131328K), 0.1844842
secs] 694640K->607915K(1004800K), 0.1849062 secs]
2219.963: [GC 2219.964: [ParNew: 126403K->39869K(131328K), 0.1842210
secs] 695467K->608932K(1004800K), 0.1846878 secs]
2228.866: [GC 2228.867: [ParNew: 127421K->39719K(131328K), 0.1920358
secs] 696484K->609702K(1004800K), 0.1925630 secs]
2238.453: [GC 2238.453: [ParNew: 127271K->40643K(131328K), 0.1889567
secs] 697254K->610627K(1004800K), 0.1894261 secs]
2247.056: [GC 2247.056: [ParNew: 128195K->40718K(131328K), 0.1947238
secs] 698179K->611585K(1004800K), 0.1951833 secs]
2255.409: [GC 2255.410: [ParNew: 128270K->40804K(131328K), 0.1939193
secs] 699137K->612886K(1004800K), 0.1943765 secs]
2264.305: [GC 2264.306: [ParNew: 128356K->39943K(131328K), 0.1884611
secs] 700438K->613753K(1004800K), 0.1889279 secs]
2273.187: [GC 2273.188: [ParNew: 127495K->39907K(131328K), 0.1996605
secs] 701305K->614598K(1004800K), 0.2001354 secs]
2281.869: [GC 2281.870: [ParNew: 127459K->39951K(131328K), 0.1870669
secs] 702150K->615514K(1004800K), 0.1875029 secs]
2290.306: [GC 2290.307: [ParNew: 127503K->39975K(131328K), 0.1803927
secs] 703066K->616409K(1004800K), 0.1809368 secs]
2300.101: [GC 2300.101: [ParNew: 127527K->39897K(131328K), 0.1830319
secs] 703961K->617187K(1004800K), 0.1835056 secs]
2310.130: [GC 2310.130: [ParNew: 127449K->39869K(131328K), 0.1858475
secs] 704739K->618039K(1004800K), 0.1862819 secs]
Does anyone know what these entries are and some possible options to speed up the startup process? Thanks. I have already gone through the notes for Virtual memory and heap settings for SUN systems. Has anyone had any similar experience?
Thanks!What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael
Maybe you are looking for
-
Custom profile not appearing in "Devices to simulate"
I've downloaded a custom printer/paper profile from Dry Creek Photo for my local Costco. I've saved the .icc profile to to the Users\[user name]\Library\ColorSync\Profiles folder. However, when I try to soft proof using View > Proof Setup > Custom, I
-
CVP call studio and default audio
Not sure if this should get posted here or on the development forum but it's getting posted here anyways... We have 4 combo boxes in our CVP deployment so we have 4 media servers. I'm trying to figure out what to configure for the Default Audio Path
-
Weblogic crash in deployment NoClassDefFoundError
Hi Guys could you please tell me how can this be fixed ? i use to get this exception when i deploy my project within Eclipse: java.lang.NoClassDefFoundError: javax/faces/component/UIComponentBase. here's a pastebin related to the full exception : htt
-
Error - An assignment of a catalog or non catalog requisitions is required
When I click on the Approve button in a PO form, I get this error - An assignment of a catalog or non catalog requisitions is required. Can anyone assist how to go about this? I don't have a requisition linked to the PO. thanks!
-
Hello Im new to workspace manager and have a question about history views. I need to track history on single data insert/change/delete over multiple related tables (situation before and after the event). My question - how or is it even possible to re