Takes a long time to send an email

I think I've finally figured out how to set up all the settings in my iPhone to send out emails both from home (using RCN) and from outside home.
But no matter where I try it, whether wifi or edge, it seems that once I press the "send" button it takes at least a minute to hear the whooshing sound of the email going out.
Is this normal? Or is there a setting I haven't turned on or off?
Thanks.

Thanks! After a bit of tinkering I got that to work. I had to add the port number after the outgoing server, AND add a password in the "optional" password field in the iPhone Mail preferences.
so mine ended up being:
mail.mydomain.com:26 (my host specified that port number)
username: [email protected]
password: mypassword
Glad that's solved. Finally! Speeding outgoing mail! woo hoo!

Similar Messages

  • Mail takes a long time to send messages

    After a power outage in my neighborhood and being given new incoming and outgoing mail servers by my ISP -- AT&T and it's Yahoo portal -- Mail is taking a long time to actually send messages after clicking the send button -- a minute or two. Thunderbird sends them immediately.
    I've grown fond of Mail. Anybody have any suggestions as to what the problem might be and how I can fix it?
    Thanks,
    Eric Weir
    Message was edited by: EricWeir

    I had this problem and just got it fixed so thought I'd post up. I have a gmail account and the problem started 3 or 4 days ago.(no recent system changes or anything I can think of that coincided with the problem) An additional symptom is that Mail wasn't showing me new messages anymore either. I could go onto the web server for gmail and there was new emails waiting but even clicking on "Get Mail" wouldn't bring them into Mail.
    I found in the Window tab a choice for Activity and one for Connection Doctor. I brought up Activity first and saw 5 items and nothing seemed to be changing on any of them. Got Connection Doctor up and it connected and said everything was fine (you can bring up details to see what ports and such it uses which confirmed that things were going ok) I went back to activity and hit the "stop sign" for all of the activity that was going on with the plan to just stop everything to try sending a new message. I started from the top and about half way through I heard the Zoom of a message going out (Mail had been working on sending the message for the last few minutes) and suddenly new activities were popping up in the list and processing quickly.
    I tried a few test messages and everything is working like normal again. I'm guessing something got stuck and that is causing the slow messages at least in my case. Check it out!
    I'm on a iMac with Snow Leopard.

  • SquirrelMail Takes a long time to send mail

    Am running SquirrelMail 1.4.10a in Tiger Server.
    Users can login, receive mail, compose new mail, and read mail fine. My problem is when a user sends mail, it takes up to 45 secs to complete the send. The sent email will show up in the "Sent" folder okay and it is sent, however, it never closes out of the "Compose" window and seems to time out.
    Any ideas?
    Do I need to add a hosts file or edit an entry into my current hosts file?
    Thank you,
    Steve K

    Hi Steve,
    I'm having the same problem with 2 server that I'm running, web mail runs perfect but the compose window won't refresh after clicking on send!! didi you have any luck fixing this issue? i found out that for some people restarting apache would help but not for me!! maybe you should try!!

  • Takes a long time to save an email after you click the email.

    after an email is saved if you click on the saved email the screen goes white. All other functions work well.

    What is your anti-virus software?

  • Takes a long time to write email

    I am using windows 7, internet explorer 8.1 .
    It takes a very long time to write an email, each letter typed, it takes a long time
    to appear on the page sometimes it don't appear..
    Please help

    Hi,
    This could be also related add-ons.
    Add-ons are apps that browsers use to interact with web content like videos and games. Incompatible or out-of-date add-ons might cause Internet Explorer to run slowly, crash, or prevent sites from displaying correctly. You might want to turn off all add-ons,
    and then turn them back on only as you need them.
    1.Open the desktop, and then tap or click the Internet Explorer icon on the taskbar.
    2.Tap or click the Tools button Tools button, and then tap or click Manage add-ons.
    3.Under Show, tap or click All add-ons, and then select the add-on you want to turn off.
    4.Tap or click Disable, and then tap or click Close
    If issue persists, let’s try to reset Internet Explorer settings.
    http://windows.microsoft.com/en-in/windows7/reset-internet-explorer-settings
    Alex Zhao
    TechNet Community Support

  • Outlook 2010 takes a long time to open emails with embedded images

    Hello,
    outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML  email messages or RSS tiems" is not selected.
    it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
    When I open the same message in OWA no delays at all.
    I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
    Any ideas?

    Hi Aprylmsx,
    According to your description, I recommend you refer to the following methods to troubleshoot the issue:
    1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
    2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
    In addition, How many users encounter this issue? a lot or just only you?
    Best regards,
    Niko
    Niko Cheng
    TechNet Community Support

  • HT1222 I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

    I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

    open inbox
    tap Edit on top right of list.
    tap each email to check it off.  Then tap trash.   then 'trash selected mesages"
    done

  • I have a new mac book air and every time i start up the computer it loads all my emails, somewhere around 10,000.  Even though I delete them, which take a long time, they keep coming back?  How do I delete all my old emails?  thank you

    I have a problem with my Macbook air which keeps reloading all my old emails to my inbox.  Even thought i delete them, which takes a long time, over 10,000...they keep coming back?  How do I delete old messages?  Thank you

    check your account settings, possibly under advanced settings.
    look for an option to check "remove messages from server" or similar.

  • Sending mail take too long time exchange 2011 in iphone4

    when i try to sending mail take too long time.
    stay long time in outbox folder.
    i'm using exchange 2011 in iphone4 with latest updates.

    Hi,
    This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
    http://discussions.apple.com/thread.jspa?messageID=10391853&#10391853
    Ernie

  • Exchange Online, Outlook 2013 - Copying large emails to public folders takes a long time

    We are using Office 365 and when copying a large email (with attachment) to a public folder in exchange online, the copy takes a long time.  Outlook does not let you do anything until it's finished coping.  This is different to other folder
    behavior in outlook where the sync with EO would happen in the background.  Is there a way round this?  It's really frustrating to copy a load of emails to a public folder.
    Thanks.

    Hi,
    I recommend you ask in office 365 forum, there are more experts to help you:
    http://community.office365.com/en-us/f/default.aspx
    Thanks.
    Niko Cheng
    TechNet Community Support

  • In attempting a slide show in PSE 08 w/275 pics, PSE warns .. take a long time, sends me to Bridge.

    I am attempting to create my first slide show in PSE, version 08.  I have a Mac OS with 199.03 GB available.  I have selected and organized 275 photos.  When I select "PDF Slide Show" under the CREATE option, I am warned twice that it will take a long time.  Then I am sent over to Bridge where these photos appear, all organized.   Nothing happens.  Is there something going on in PSE that takes a long time and I cannot see?

    You can't do any of that in the mac version even if you have 2 photos. The so-called slideshow is basically a multipage pdf document that displays transitions as it turns pages. That's it.
    EDIT By "turns pages " I mean "changes from one page to the next".

  • Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

    firefox problems after installing version 4.0

    Hi Hussein,
    Thanks for your prompt reply and my apologies for the substantial delay in mine.
    We did some trouble shooting since then.
    We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
    But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
    My earlier questions here now boil down to the following questions.
    Q1. Is the huge XML Publisher's .out file expected in R12?  It really is massive!  The text file from 11i was just 19MB
    Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text.  I would expect plain text file to be much smaller.  How can we get the output in plain text?
    1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
    2. The authentication error is resolved. It was because of formatting the reports incorrectly.
    3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
    4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
    I will appreciate if others  can share any experiences if you have faced this situation and how you have handled it.
    Thanks in advance for your time!

  • Error,13030 and others! unable to download, takes a long time to get to any page.

    # Question
    Error,13030 and others: Email -!Sending taking a little longer than usual...
    We'll keep trying and let you know when it's been sent.
    I am also unable to download (I use Send Space and Mega Upload), plus it takes a long time to get to any page, I have to Reload several times and sometimes it still does not work!
    I'm using a PC, XP professional -
    I was away for 9 days came home to my computer not responding. I am using the free version of AVG security and read the instructions in the Mozilla help Re: Firewalls, changing the AVG settings removing Mozilla and then adding it back in. However I checked for updates on AVG none were available and the instructions Mozilla has are for a version of AVG that I do not have. I am using 8.5 and I think the instructions were for 9.0. At any rate I am stuck, and desperately need to get this figured out! I hope that this is enough information for someone to point me in the right direction.? Your help is be greatly appreciated. Thank you in advance! Charisme

    ldcorn wrote:
    My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
    See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
    Message was edited by: tjk

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Snow Leopard 10.6.2 takes a long time to run 'X11.app' (with system log)

    Hello everyone, English is not my mother tongue so may not be exactly correct, sorry about that.
    Background:
    I have a MacBook White (13-inch, Mid 2009) that isn't unibody, and was running Leopard 10.5.
    I did a clean installation and now Snow Leopard 10.6.2, with iLife, iWork, and many many apps.
    I am the only one who will use the Mac and my user account is as the 'admin'.
    I previously had a problem concerning X11 too:
    http://discussions.apple.com/thread.jspa?threadID=2343732
    *What I've done:*
    (1) rename my HD to 'Michaels_Home' under 'Get Info' from Finder (I can't rename in Disk Utility though)
    (2) press return (enter)
    (3) change my home folder path to the '/Volumes/Michaels_Home/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
    (4) restart
    (5) log in and open X11
    (6) problem solved!!
    ==========
    *BUT NOW* I have a problem after:
    (1) log in as the root user, and use command +ditto -V xyz xyz+ to copy my home folder from '/Volumes/Michaels_Home/Users/Michael' to '/Users>Michael'
    (2) change my home folder path to the '/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
    (3) use the Mac OS X Snow Leopard USD$29 disc to boot my Mac up
    (4) delete the 'Michaels_Home' partition (I had 3 partitions: (1) Macintosh HD (2) Michaels_Home (3) Windows XP Professional)
    (5) resize the 'Macintosh HD' partition
    (6) boot from Macintosh HD
    (7) find that there's a problem about X11
    _The problem:_
    it takes a *long time* for X11 to start.
    When I try to open the 'X11.app', the X11 icon begins jumping on the Dock, but nothing happens.
    Jumping and jumping... finally, it doesn't jump any more, with just the X11 icon on the dock.
    What's more, there is no white dot under the icon, which means the app isn't running at the moment.
    I right-clicked the icon, it shows me 'application not responding'.
    So, I open the *Activity Monitor*, and I can see there are 3 apps related to X11 are running:
    (1) X11
    (2) X11.bin
    (3) xauth
    *At the moment now, if you would wait for about 1.5 min., X11 will open.*
    Please see below for the system log (from 'FREEZING' to 'WORKING')
    ==========
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: main(): argc=2
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -psn0139298
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: Waiting for startup parameters via Mach IPC.
    Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Scanning user font directories to generate X11 font caches
    Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Updating FC cache
    Mar 1 00:42:10 n219073058253 org.x.privileged_startx[344]: font_cache: Scanning system font directories to generate X11 font caches
    Mar 1 00:42:10 n219073058253 defaults[370]: \nThe domain/default pair of (org.x.X11, dpi) does not exist
    Mar 1 00:42:12 n219073058253 org.x.privileged_startx[344]: font_cache: Updating FC cache
    Mar 1 00:42:13 n219073058253 org.x.startx[335]: font_cache: Done
    Mar 1 00:42:14 n219073058253 org.x.privileged_startx[344]: font_cache: Done
    Mar 1 00:42:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.serverauth.335
    Mar 1 00:42:51 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    Mar 1 00:43:31: --- last message repeated 1 time ---
    Mar 1 00:43:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    Mar 1 00:43:51: --- last message repeated 1 time ---
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Listening on socket for fd handoff: (4) /var/tmp/tmp.0.9OYerf
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Thread created for handoff. Returning success to tell caller to connect and push the fd.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Received new $DISPLAY fd: 6 ... sleeping to allow xinitrc to catchup.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: dostart_x11server(): argc=6
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /usr/X11/bin/X
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] =
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = -nolisten
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[3] = tcp
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[4] = -auth
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[5] = /Users/Michael/.serverauth.335
    Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Handoff connection established (try 1 of 5) on fd 6, "/var/tmp/tmp.0.9OYerf". Sending message.
    Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Message sent. Closing handoff fd.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Xquartz starting:
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X.Org X Server 1.4.2-apple45
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Build Date: 20090705
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base
    Mar 1 00:43:54: --- last message repeated 1 time ---
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app Handing off fd to server thread via DarwinListenOnOpenFD(6)
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: DarwinListenOnOpenFD: 6
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: Calling ListenOnOpenFD() for new fd: 6
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Launching /usr/X11/bin/xterm:
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /bin/sh
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -c
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = /usr/X11/bin/xterm
    ==========
    I quit the X11:
    ==========
    Mar 1 00:45:45 n219073058253 [0x0-0x22022].org.x.X11[327]: Quitting Xquartz...
    Mar 1 00:45:45 n219073058253 org.x.startx[335]: /usr/X11/bin/xinit: connection to X server lost.
    Mar 1 00:45:45 n219073058253 org.x.startx[335]: waiting for X server to shut down
    ==========
    AFTER quitting X11, I can see something related X11 is stilling running:
    ==========
    Mar 1 00:46:06 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    ==========
    So what actually causes this problem?
    Thanks in advance!

    It turns out that there's something wrong about permissions.
    Here's the fix:
    (1) log in as the +root user+
    (2) type +chown -R Michael:staff ~Michael+
    (3) log out the +root user+
    (4) log in your account
    (5) done!
    Hope this thread will help those who encounter the same problem as me!

Maybe you are looking for

  • Generate a simple report in XML publisher

    Hello, I have a simple Oracle Report 9i which displays data from four tables. It uses three different queries to get the data. How can I simply generate a similar report in XMLP without using the oracle report? I tried joining the queries (like outer

  • TS4194 APSDaemon.exe blocking iCloud reopen (iTunes 10.6.3.25, iCloud Control Panel 1.1, Win 7 32-bit)

    Using iTunes 10.6.3.25 & iCloud 1.1.  I still have this problem.  No more updates are available from Apple Software Update.  Using Windows 7 SP1 32-bit in a workplace environment.  I still have to kill APSDaemon.exe to reopen iCloud.

  • Transfer audio from garageband to adobe premiere

    Hello all, like the title says, how would i go about transferring audio from garageband to adobe premiere? I'm making a short movie and want to add narrative audio i recorded in garageband to movie clips i have in adobe premiere cs5, i have the lates

  • Can I launch MS Access from labVIEW?

    I would like to programmatically lauch MS Access and compact a database. Or perhaps I could set the table to compact on exit and exit it programmatically through labVIEW. Can I launch and exit a Microsoft application using labVIEW?

  • Problam pc

    the system has detecled that a cooling fan is not operating support