Tandberg E20 compatablity with Meeting place 6.0

Hi,
Is there any way we can make Tandberg E20 work with meeting place 6.0,The CUCM version 8.5 and its added as E20
Thanks in Advance

Hi Shashank,
The fact that CUCM 8.6.2 is not specified in the MP8.0 documentation means that MP8.0 hasn’t been officially tested with that version of CUCM, and hence cannot be stated it is officially supported. Since MP8.0 is end of sale, there won’t be any additional testing of this product, and hence CUCM 8.6.x won’t be added to the documentation at any time.
It may work but it is not officially supported by the BU.
Thanks,
Anand
Please rate helpful posts !!

Similar Messages

Webex (cloud) integrated with Meeting Place 8.5 no audio record

Meeting Place 8.5 fully integrated with Webex. Webex scheduling is used. Meeting participants use Webex for the sharing of video and desktop. Meeting participants call into the Meeting Place Server for audio. Recording is turned on by the Host on Webex. Recording is saved. When recording is played back, cannot hear any audio from that I was assuming is recorded on the Meeting Place Server. I need guidance on how to get audio recording of meeting using Meeting Place as the audio conference bridge. Host user is setup on Webex to use Meeting Place server. As far as I can tell users are set up correctly. Any help will be greatly appreciated. Thanks.

Hi Thomas,
Is this a new deployment or a production environment?
What exact version for MeetingPlace 8.5 do you have?
Was recording working before and just stopped, or it never worked?
Can you attach the screen shot of "MeetingPlace Administration Center > Cisco WebEx Configuration > Cisco WebEx Site Configuration"?
Can you attach the screen shot of your "WebEx Site Administration > Manage Site > Site Settings > View Cisco Unified MeetingPlace Integration Settings page" page?
How recording works:
When you start a meeting in WebEx, and participants join audio on MeetingPlace, and you click Record button, WebEx dials in to MeetingPlace using the "NBR Dial-out Number" configured in "WebEx Site Administration > Manage Site > Site Settings > View Cisco Unified MeetingPlace Integration Settings page" and joins the meeting with recording user credentials automatically generated by the system and initiates recording of the audio portion of the meeting. Audio and web recording are afterwards mixed in the cloud and available for playback.
Issues seen with recording:
1. "NBR Dial-out Number" is wrong (wrong Access number is provided when Cisco WebEx Site Configuration was configured).
2. DTMF digits weren't passed properly to MeetingPlace when WebEx dialed in to MeetingPlace to join the meeting and start the recording. However, in those case you would probably hear MeetingPlace prompts in the recording and not silence.
3. Recording wasn't triggered properly in WebEx and needs investigation (investigation with WebEx support)
4. Recording couldn't be started on MeetingPlace and needs investigation (logs, TAC case, etc.)
I hope this information is helpful for the start.
-Dejan

Meeting Place 7.1 Scheduling recurring voice conference issue

Hello I am having an issue with Meeting Place 7.1, whenever we try to schedule a recurring voice conference we do not get the whole schedules that we need.
For example If I try to schedule a conference daily for a month I don´t get schedule all the 30 days I get an error in some days.
I have found this in the User Guide for Cisco Unified MeetingPlace thecnical documentation:
• If the system is unable to schedule all meetings in your complete recurring meeting chain, it prompts
you about the meetings it could not schedule. If this happens, set up individual instances of the
meetings that could not be scheduled.
But I am wondering if there is something that could fix this issue, becuase it happens every time we try to use the recurring option.
Thanks in advance for your help.

what does the Username for the dedicated email account for Cisco Unified MeetingPlace on the Microsoft Exchange Server indicate?
Example: [email protected]
Does that means that email notifications sent by meeting place will be sent by the email address [email protected]?

Meeting Place

1.my understanding is that if you want to have a videoconference of 3 or more parties, you need an MCU, such as a 3515.
2.Can you not just use meeting place express or meeting place express VT ? as opposed to having to use an high value piece of hardware such as MCU.
3. or is it that an MCU has meeting place built in so you wouldn't need an mcs server with meeting place express installed.
In short I want to do videoconferences with 10 participants but at an effective cost. I do not need to do over ISDN. but will need to do over 2 mpls sites.
can anyone recommend a good cisco solution?

Any advice would be much appreciated

Meeting place 7.0 compatibility C20 and Movi.

Hi,
I need your help to know if the C20 and Movi devices is compatibility to works with meeting place 7.0. I've checked the cisco documentation and this devices has not been tested with this version.
Anybody knows if it's can working?
Regards

@Radim Mutina.
Yes, like I said before, must read carefully the guidance (docwiki.cisco.com)
If You don't read carefully guidance, it's look similar only 1 word different
I face this problem almost 3 days and I almost gave up, want to open TAC
But, finally I found a needle in a stack of hay
Thank You, for rate Me up

Unable to luanch meeting room(Meeting place 2.x)

I having some issue with meeting place Web meeting .
Whenever i join the web meeting room , i am getting the below error
System ERROR:
The meeting Room Couldn't connect to the cisco unified meeting place server, please re-launch the meeting room or refresh your browser to restore the connection
Note:
I- installed the proper Flash player, presenter adds on software
2- Browser TEST worked fine
3- I dont see any firewall rule blocking the connection
I will really appreciate your help on this issue.
Regards ,
Shaijal

Hello ,
I got solution for this issue.
There are two IP address for Meeting place express .
one for audio and meeting place access.
second ip is used for Web trafic .In my scenario i havn't done any DNS configuration for
my second IP.After the proper DNS change it statred working .
Thanks ,
Shaijal

Meeting Place ver 8 HA over Wan

Hi Guys,
Interested in whether we can run active active HA with meeting place ver 8 over a WAN link?
Spotted some info in wiki but dont think its related to ver 8..
Mentioned both servers have to be in same vlan and HMS required..
Anyone know if this can be done and whats required?
Thanks in advance..

Hi
I have this problem with one of my customers, or something similar - it's CSCug18648.
According to TAC, up to 30 seconds is 'acceptable/as designed'. We randomly (but frequently) get multiple minute delays, and it's due to some other process on the system locking some of the data. It should be fixed in ES03 for 8.5(1)SU4, which should be available approximately the end of May.
Regards
Aaron

Meeting place express email notification not working

Hi,
Facing issue with meeting place express email notification.
The SMTP e-mail exchanger rejected a recipient's e-mail address as unknown.
is the error message i get.
Ping status is fine, on firewall ports are opened as any any.
As per the exchange administrator, there is no request coming to the exchange from meeting place.
Any help is appreciated.
Thanks,
Vinay

I assume this is an existing system that has been working as MPE has not been sold in a long time. Was this working in the pass and just stopped working? When are you seeing this error and does it happen for all users?
Has the logon changed that MP uses to access the SMTP server? If the password changed on the SMTP server and was not updated on MP this will happen.
John

Meeting Place 8.0.1.2 and ccm 8.6.2 compatibility confirmation

Hello,
We wish to upgrade our CCM from version 8.0.1 to 8.6.2 which is integrated with meeting place version 8.0.1.2. We have searched for the compatibility on cisco.com and found following two references. We also checked with PDI and they have recommended to use ccm 8.5 or upgrade meeting place to 8.5.
Does anyone have meetingplace 8.0.1.2 and cucm 8.6.2 integrated ?
Note - We have meeting place for audio conference meetings only at the moment. Due to other application requirement we have to upgrade to cucm to 8.6.x.
URL 1 <<----- This states that,
For audio-only installations, you may connect Cisco Unified MeetingPlace to Cisco Unified Communications Manager Release 6.0(3) or later release: this is for Meeting Place 8.0
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_System_Requirements_for_Cisco_Unified_MeetingPlace_Release_8.0#Cisco_Unified_Communications_Manager
URL 2 <<----- This states that,
Component name
Cisco Unified Communications Manager
Component Version
6.1(2) - 8.0
Release Date
Nov. 12, 2007 - Mar. 26, 2010
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Compatibility_Matrix_for_Cisco_Unified_MeetingPlace_Release_8.0
Also, in the compatibility tool , It states that
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet
Goto release -->>8.6->Conferencing ->Cisco Unified MeetingPlace
8.6.(1) compatible version is - Initial 8.5(1).
Thanks,
Shashank

Hi Shashank,
The fact that CUCM 8.6.2 is not specified in the MP8.0 documentation means that MP8.0 hasn’t been officially tested with that version of CUCM, and hence cannot be stated it is officially supported. Since MP8.0 is end of sale, there won’t be any additional testing of this product, and hence CUCM 8.6.x won’t be added to the documentation at any time.
It may work but it is not officially supported by the BU.
Thanks,
Anand
Please rate helpful posts !!

Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway

Hi,
This is first time I am on this forum.
I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
Then I also need help on AS5400 SIP configs with CUMP 8.0
Any docs on Integration between CUMP and TP3000 will be of great help too.
Rgds,
Asim

I can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
|160.260684000|         INVITE SDP (g711U)            |                   |SIP From:
|         |(5060)   ------------------> (5060)   |                   |
|160.338806000|         INVITE SDP (t38)              |                   |SIP Request
|         |(5060)   <------------------ (63435) |                   |
|160.339545000|         491 Request Pending           |                   |SIP Status
|         |(5060)   ------------------> (5060)   |                   |
|160.547894000|         406 Not Acceptable            |                   |SIP Status
|         |(5060)   <------------------ (63435) |                   |

Question in Cisco Unified Meeting Place 8.5 with Webex integration

Greetings,
Let us say that I have the following requirements for fresh installation:
UCS C210-M2
CUWL-Pro for users (700 users)
CUCM 8.6
Cisco unified Meeting Place 8.5
My concern is about Meeting place; one of the requirments is to order Meeting Place 8.5 for local (on-premises) audio conferencing, and use Cisco Webex (cloud) for Web & Video conferencing.
I have the following questions:
- What part numbers should be ordered for meeting place and Webex?
- CUWL-Pro comes with Webex ports included, can use those ports?
Thanks in advance..

Hi Anand,
For MP 8.5 new setup, you don't need a web server. Web server is an optional component only when you are upgrading the system from earlier MP releases.
If you are installing Webex node, it needs to be on a seperate MCS server (however, this is an optional component).
Application server and Express Media Server require only one UCS server if this is single node deployment.
Hardware requirements for application server and Webex node can be found in the following documents:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Application_Server_Requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Cisco_WebEx_Node_Requirements
The complete information about MP 8.5 requirements:
http://docwiki.cisco.com/wiki/Category:Planning_for_Cisco_Unified_MeetingPlace_Release_8.5
HTH,
Natasa

Meeting Place 8.6 Integration with Webex

Hi, I would like to get a better understanding of workflow and packet flow for MP 8.6 integration with Webex.
My customer is looking to initiate an on prem meeting with MP 8.6 via outlook scheduling /jabber (if possible). All audio and video would be on prem. Also, this would be a multipoint video call, so I am assuming an MCU would be required (unless MP 8.6 provide MCU capabilities).
Then, through a federated IM environment, my customer would like to be able to chat with an external partner via jabber and escalete the on prem MP8.6 conference to a Webex meeting to add the external partner to the meeting.
Questions
1. Are you able to walk me through how this would work?
2. Can you recommend a bill or materials based on the scenario and facts below? Right now I am assuming we need CUWL professional for required users, a UCS C210, an MCU and Webex subscription.
Current Assumptions & Questions
1. In this scenario the audio bridge would have to remain on prem and the external partner could request a call from meeting place to join the audi bridge back via Webex. Correct?
2. If am MCU is being used on prem for the multipoint video conference and the conference was escalated to a webex via jabber how many video connections to Webex would there be? Single multiplexed video from the MCU or individual video connections from on prem to Webex and Webex would combine the video sources?
3. Is Webex Node still required?
4. With MP 8.6 is scheduling still tightly integrated with Outlook?
Facts:
1. Users are a combination of CUWL standard and professional. Professional users for conferencing and mobile jabber.
2. Customer has TP envrironment which would be multipoint video participants
3. Customer has compatible CUCM and CUPS with MP 8.6
4. Jabber desktop will be installed on all clients
5. Customer is expanding PRI, ISR and DSP resources to support additional audio requirements

All - what have discoverd is Meeting Place node is going away. Meetings will be held in Webex moving forward and MP should be used as an on prem audio bridge only. Some new WebEx solutions are on the roadmap.

Integrating Tandberg E20 with CUCM

Hi Everybody,
I am integrating Tandberg E20 phone as a sip endpoint in CUCM 7.0 and it regesters with no problem. However, the problem comes when you try to make an out going call to other IP phones in the cluster. it takes about 15 secs for the call to reach the other phone. During these 15 seconds I am recieving a ring back on the E20 even though there is no rining actually happening until after the 15th seconds. the E20 recieves calls with no problems.
If any one has any insight about this issue, it is appreciated.
Regards

Alí,
Just thought of something else... Are you hitting the Dial button on the Tandberg phone? (Or anything similar)
If yes, then you are looking for the device that is not responding on time. Is this is a SIP to SCCP type of call?Or are you dialing Tandberg to Tandberg?
After clarifying point above, register the two nodes to the same CallManager node, SSH into that server, and collect a packet capture while you reproduce the problem:
utils network capture eth0 file tandberg count 100000000 size all
Make sure the enpoints time is synced with CallManager's
Write down the exact second you start the test
Call from Tandberg to a SCCP IP Phone
Let the SCCP phone ring for a few seconds then pick up the call
End the call from the Tandberg endpoint
Press Ctrl+C to end the packet capture and collect through RTMT: http://supportforums.cisco.com/docs/DOC-11588 (look for CLI packet captures option)
A CCM Trace file woud be helpful too. Basically you want to trace the signaling on each leg and determine where the delay is. We can expect it either after you hit the Dial button on the E20 and before CallManager receives the INVITE message, or after CallManager gets the signal and before it sends it out to the SCCP phone. That is why we need your hand watch to be in sync.
If you want you can upload the trace file and packet capture, along the MAC and IP Addresses (phones and server), calling/called numbers and exact time you started the test.

Problem with Cisco Unified Meeting Place Express

the user is unable to get connected to the Meeting Bridge set up in the Cisco Unified Meeting Place Express on the scheduled time.

Hit up [email protected] and ask. They'll either say 'no' or give you hand; either way that's your answer.

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Tandberg E20 compatablity with Meeting place 6.0

Similar Messages

Maybe you are looking for