Target Data Collection in ASCP

Hi,
I was NOT able to see "Target Data Collection" parameter in LOV of Data Collection Concurrent Program.I was able to "see" ONLY Complete Refresh Parameter in LOV.
Is there any Profile Option?
Regards
NTGR

set "purge previously collected data" to 'NO' in the parameter list. you will able to see "targeted collection" and "Net change Collection" in Collection Method parameter LOV.
Regards
Abhishek

Similar Messages

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

Consolidation Group in Target Cube (Data Collection Task)

Dear Experts,
In consolidation Monitor, While doing Data Collection task via Load from Data Stream, after doing Updation, WHen I see the content of Target InfoCube in RSA1, In GL account Line item I do not get COnsolidation Group Value.
Like
GL account Company CCode Cons Group Currency PV LC PV GC
100000 3000 3000 (Blank) USD 1000 44000
1) Is it necessary to Have Value in Consolidation Group?
2) If Yes, What is the utility and how to get value in this column.?
Regards
Ritesh M.

No, ConsGoups are determined later, during the ConsGroup-dependent tasks.

ASCP Data Collection Fails

Dear Members :
For sake of learning, ATP in R12.1.1 Vision instance, I created a simple ATP rule with Demand as Sales Order and Supply as PO, On-hand Available.
I followed all the steps as below:
1) After creating ATP rule and attaching it to the order mgmt tab in item master, enabled ATP at the org level.
2) created sourcing rule for that item and assigned it to an assignment set(Supplier Scheduling).
3) This assignment set appears by default to MRP:ATP assignment set profile option
4) Set INV : Capable to Promise to ATP/CTP based on collected data, at responsibility level
5) Include organizations to instance TST(default)
6) Run ATP Data collection Program.
RCS is errored out with User-Defined Exception (Source Setup Objects Creation Requests did not complete Successfully) along with Collection Triggers/Views errored out with
Error with creating Source Triggers/Views
Is it my setup problem or patch I need to apply, if you could please guide ?
Thanks in advance.
Atanu

Following are in log for them:
**Starts**03-JAN-2011 20:00:52
**Ends**03-JAN-2011 20:12:22
Error in creating Source Triggers
Start of log messages from FND_FILE
03-JAN 20:00:52 : Request : 5807365 :Creates Item Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807366 :Creates BOM Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807367 :Creates Routing Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807368 :Creates WIP Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807369 :Creates Demand Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807370 :Creates Supply Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807371 :Creates Other Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807372 :Creates Repair Order Triggers used by Collections Process
End of log messages from FND_FILE
***********************************AND that of Source Views details :**************************************************************
**Starts**03-JAN-2011 20:00:47
**Ends**03-JAN-2011 20:12:18
Error in creating Source Views
Start of log messages from FND_FILE
03-JAN 20:00:47 : Request : 5807356 :Creates Setup Views used by Collections Process
03-JAN 20:00:47 : Request : 5807357 :Creates Item Views used by Collections Process
03-JAN 20:00:47 : Request : 5807358 :Creates BOM Views used by Collections Process
03-JAN 20:00:47 : Request : 5807359 :Creates Routing Views used by Collections Process
03-JAN 20:00:47 : Request : 5807360 :Creates WIP Views used by Collections Process
03-JAN 20:00:47 : Request : 5807361 :Creates Demand Views used by Collections Process
03-JAN 20:00:48 : Request : 5807362 :Creates Supply Views used by Collections Process
03-JAN 20:00:48 : Request : 5807363 :Creates Other Views used by Collections Process
03-JAN 20:00:48 : Request : 5807364 :Creates Repair Order Views used by Collections Process
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JAN-2011 20:12:18
======================================================================
Thanks
Atanu

ASCP Data Collection Error

Hi,
Environment: Decentralized
Number of Org: One
After doing initial setup in Dev Planning and Source instances,
In Planning Instance, When I launched "Planning ODS Load", this set is launching the concurrent program "Generate Items and Category Sets Keys".
The concurrent "Generate Items and Category Sets Keys" completed with the below Error.
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
ORA-06512: at "APPS.MSC_CL_ITEM_ODS_LOAD", line 1955
ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6853
ORA-06512: at line 1
The
Start of log messages from FND_FILE
28-DEC 12:10:47 : ========================================
28-DEC 12:10:47 : Error in PROCEDURE=GENERATE_ITEM_KEYS, TABLE=MSC_ITEMS
28-DEC 12:10:47 : COLUMN=ITEM_NAME, VALUE=
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
What setups I need to do?
For your information, I launched "Create Planning flexfields" in source Instance. But this Issue is not yet resolved
Your answer will be most appreciable
Regards,
Ramesh

Dear Shiva / Experts,
I completed the Actions
1. Recompiling the System Item Flexfields - In Source Instance.
3. Refresh Collection Snapshots with Complete Mode - In Source Instance
4) Then I tried Planning ODS Load before Data Collection (Why I launched ODS load manually is, Data collection is getting error with recommending ODS Load).
But I am getting the same old below ERROR MESSAGE.
5) Then I tried Action plan 2 (we found one item having null value in Segment1 and we given one value and committed), then I did Actions 1, 3 and 4. But I am getting the same old Error message.
6) After completing the Actions 1 to 5, I am in same old status.
Please suggest me
Your answer will be most Appreciable
Regards,
Ramesh
Action point 2 is
Select count(*) FROM MTL_SYSTEM_ITEMS_B where SEGMENT1 is NULL;
Solution
1. Confirm that the Item Staging Table does indeed have values in the Item_Name
column for all rows (in this case they did)
2. Confirm that the mtl_system_items_b table has null Segmen1 values
select * from apps.MTL_SYSTEM_ITEMS_B where segment1 is null;
3. Populate the missing values for SEGMENT1:
Note that we don't think it will be possible for you to edit this field, that
represents Segment1, directly in the Item Master so you will need to do it using
this SQL statement:
UPDATE mtl_system_items_b
SET segment1 = &segment1
WHERE inventory_item_id = &itemid ;
commit;
Please make sure that SEGMENT1 value that you provide in the above script is
unique i.e. does not already exist.
ERROR MESSAGE:
The concurrent "Generate Items and Category Sets Keys" completed with the below Error.
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
ORA-06512: at "APPS.MSC_CL_ITEM_ODS_LOAD", line 1955
ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6853
ORA-06512: at line 1
Start of log messages from FND_FILE
28-DEC 12:10:47 : ========================================
28-DEC 12:10:47 : Error in PROCEDURE=GENERATE_ITEM_KEYS, TABLE=MSC_ITEMS
28-DEC 12:10:47 : COLUMN=ITEM_NAME, VALUE=
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
Your Answer will be most Appreciable
Regards,
Ramesh

Data Collection -- Planning Data Pull process failed

Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
Andi

This error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3

Customer Name on Sales Order not in Data Collections

Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
Rich

You can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason.

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

Data Collection task error (Item is not defined in Cons Chart of Accts 01)

Dear Experts,
While executing Data collection task, I am getting error "Item is not defined in Cons Chart of Accts 01", What could be the reason?
(Many Items are getting collected in target, but at the topline this error is been shown)
Regards
Ritesh M

Thans Dan,
I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart of account.
Kindly tell me how to assign chart of account to these GL account?

Can we run parallel data collections to collect multiple source instance.

Hi,
We have a business requirement where we will have multiple Source(ERP) instance and single Destination(ASCP) instance. We would like to check if we will be able to run Data collections in parallel to collect multiple EPR instance in the same time window. This is to reduce the total planning process time duration as following data collections we will be required to run multiple plan runs.
Please help me with your expert comments
Rgds
Sid

You may instead use Continuous collections to save on time so it can run collections from both instances periodically throughout the day thereby reducing a single timespan to collect all the data.
Thanks
Navneet Goel
Inspirage

BI data collection question

Dear colleagues,
I have one big question regarding the BI data collection functionality (within the solution reporting tab of T-cd: DSWP).
To whom it may concerned,
According to the SAP tutor located at the learning map,
it looks like SolMan system requires XI installed in order to use the BI data collection. Is this correct? If so, are there any step by step configuration guide that covers from installing XI to enabling the BI data collection function?
Thank you guys in advance.
rgds,
Yoshi

Hi,
But we want to maintain Item Master in ITEM02, Item Branch in ITEM03 data separate infoobjects because the discriptions always changing that is the reason I created different Master Data infoobject.
Let me give one sample data
Record1: IT001 LOT1 BRAN1 CODE1 CODE2 DS01 DS02 in 2006
Record2: IT001 LOT1 BRAN1 CODE1 CODE2 DS05 DS04 in 2007
If you look at above data in 2006 item description was DS01,DS02 and in 2007 Description changed from DS01, DS02 to DS05,DS04 with the same item no.
We want to maintain item descriptions will be the same in 2006 and 2007 if we change item descriptions in 2007. How can it be possible?
If I go your way how can we achive this task?
Do we need Dalta loads?
Also do i need to create InfoCube? Can I use ITEMNO infoobject as a Data target ?
Please let me know your thoughts.
Regards,
ALEX

How to do filter data after Data Collection for Oracle PS

Hi Experts,
I have a critical issue on the "Data Volume" after data collection program.
If I give this big chunk of data as a input to PS, then integration program is not taking this High volume of data into PS.
Hence now I have a critical task to reduce number of Data.
In this front, first I need to delete some items which are not required for PS in the base table(In MSC_SYSTEM_ITEMS) after collection program, but I do not know the dependent entities which also has to be taken care in MSC side after collection, If I delete the itrems from MSC_SYSTEM_ITEMS..
Hence I require help on this data filter issue.
Appreciating anyone's help in advance...
Thanks & Regards,
Bharathram N

Hello,
Have you looked at the request Purge ODS Data of Collections? Using this you can delete all the collected data for a specific instance id.
Once that is done you can run a complete refresh for all entities for all enabled organizations. This will ensure that old data pertaining to disabled orgs is removed.
Additionally in 11.5.10 (collections rup 32 and later) there is a feature implemented which does not pull data from disabled organizations into the source snapshots. This in itself does not make a difference for the ODS data, but does give better performance in the refresh snapshots.
One thing to take into account if your purge the ODS data that in the event when you still have ascp plans that are based on this data, then you may end up with no data being displayed in the workbench (because the lid tables have been purged). Here you would have to rerun the plans.
best regards
Geert

Event data collection process unable to write data to the Data Warehouse

Alert Description:
Event data collection process unable to write data to the Data Warehouse. Failed to store data in the Data Warehouse. The operation will be retried.
Exception 'InvalidOperationException': The given value of type Int32 from the data source cannot be converted to type tinyint of the specified target column.
Running SCOM 2007 R2 on Server 2008 R2 with SQL Server 2008 R2. I can only find a single reference to this exact error on the Internet. It started occurring on a weekend. No changes were made to the SCOM server directly before this occurred. Anyone know
what the error means and/or how to fix?

Hello,
I would suggest the following threas for your reference:
Troubles with DataWarehouse database
http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/5e7005ae-d5d8-4b5c-a51c-740634e3da4e
Data Warehouse configuration synchronization process failed
to read state
http://social.technet.microsoft.com/Forums/en-US/systemcenter/thread/8ea1f4b9-115b-43cd-b66f-617533703047
Thanks,
Yog Li
TechNet Community Support

Alert data collection process unable to write data to the Data Warehouse

Alert data collection process unable to write data to the
Data Warehouse. Failed to store data in the Data Warehouse. The operation will
be retried.
Exception 'InvalidOperationException': The given value of type
String from the data source cannot be converted to type nvarchar of the
specified target column.
One or more workflows were affected by this.
Workflow name:
Microsoft.SystemCenter.DataWarehouse.CollectAlertData
Instance name: Data
Warehouse Synchronization Service
Instance ID:
{9A0B3744-A559-3080-EA82-D22638DAC93D}
Management group: SCOMMG
Can anybody Help?

About 24 hours ago, one of my four management servers began generating this error every 10 minutes; we only upgraded to SCOM 2012 R2 a couple weeks ago, I have NOT installed UR1. No new management packs or database changes have been made within the
last week; KB945946 is not related to this. An Event ID 11411 warning started occurring around the same time as this started and repeats every 10 minutes, too:
Alert subscription data source module encountered alert subscriptions that were waiting for a long time to receive an acknowledgement.
Alert subscription ruleid, Alert subscription query low watermark, Alert subscription query high watermark:
5fcdbf15-4f5b-29db-ffdc-f2088a0f33b7,03/27/2014 00:01:39, 03/27/2014 20:30:00
Performance on the Data Warehouse database server seems fine; CPU, memory and disk I/O are good.
How can we identify where the problem is?

Print Data Collection

I am looking for a print data collection tool similar to PrintSolv or FleetPrint for PC environments. The target environment is 100% Apple computers (Servers, desktops & Laptops) and primarily HP & Epson printers. We could introduce a PC to the environment to perform the print data collection on network printers but neither PrintSolv or FleetPrint have a Mac agent to collect data from direct attached printers.
Thank you for your help.

Look into PrintCapture. I managed it at a client a few years ago, so don't know how well it works with Intel/10.5, but it worked pretty well on Tiger/PPC - the client was able to collate print numbers and bill their clients from the information.
Matt

Target Data Collection in ASCP

Similar Messages

Maybe you are looking for