Target value exceed in contract

when i try to creat the service entrysheet by adopting the service details from the contract . then i am getting  this error:TARGET VALUE EXCEED"
COULD ANY ONE SOLVE THIS ERROR..kindly suggest the possible way to solve this error..
regards,
Manu

hi Manu,
This message appears when the value maintain at service entry sheet exceeds then that defined at the contract...
As per this i think you have maintain a Value contract.....
Firstly, PLs check the enter value limit in the contract....
Then check the entry sheet, whether you are entering the more value then that defined in the contract....
If yes, then pls correct here and check and save....
This shd resolve your problem....
Hope it helps....
Regards
Priyanka.P

Similar Messages

  • Target Value of the contract can not exceed ...

    Hi All,
    Target Value of the contract can not exceed ...
    Thanx

    Since your refer the Contract for creating the Purchase order, it takes the specified value limit mentioned in the contract. The Value of that particular contract must have reached it purchasing limit. So u cant raise any further PO refering that.
    Hope this helps.
    Reward if u find it useful

  • How to get message Target value exceeded for value contract in consignment

    Hi Gurus,
    I have created a value contract in consignment process.
    When the TOTAL VALUE of the release orders exceed the TARGET value of the value contract, system is NOT alerting me with message "Target Value Exceedded".
    In normal value contracts, system throws error message while creating release order if target value is exceeded.
    How such message can be generated in case of consignment process?
    Is there is any configuration involved for item category 'K' for this requirement?
    Thanks in advance,
    Regards,
    Sastry

    Hi,
    Thanks for the reply.
    Those messages are already configured and they are working fine for my normal contracts.
    I need such messages for value contracts in consignment process (item category 'K').
    As there is  no net price in consignment PO, such messages are not generated even though required messages are already configured.
    Is there any other thing I need to do for CONSIGNMENT process
    Regards,
    Sastry

  • Target quantity exceeded from contract

    Hi,
    I want to configure that in creation of an purchase order with reference to quantity contract, the system will not display the warning message of "Target quantity 100 EA of contract item exceeded by X EA"
    When deletng the warning message from the "system messages" list, we recieve an error message in the purchase order.
    Is this possible?
    Hila David

    Do not delete any standard messages.
    What you could do is to control the message through SPRO: SRM server -> cross application basic settings -> message control -> influence message control ->
    select PO type: BUS2201
    double click on "message control"
    Create an entry for message class = BBP_PD / No = 562 / type = "-" (switch off)

  • PO not allowed beyond the target value of contract.

    Hi Forum,
    I have a Contract, when I create a PO with ref to the Contract, it should not allow the PO to be created beyond the target value of the Contract. Where should I make the configuration settings for this. Whenever the PO created beyond the target value it should give an error and should not allow to proceed further. Please advise.
    Thanks in advance.
    Ashish

    Hi
    Please maintain the message as an error
    06-042 Target value of contract & exceeded by & &
    in SPRO-> IMG-> Material Management-> Purchasing-> Environment Data-> Define Attributes of System Messages

  • Value Contracts - Target value at header

    Hello Gurus,
    I have a scenario where in we need to provide the target value in the contract for all the items present in the contract.
    I am using the value contract type wk1, its only allowing me to provide target value for each material. Is there a way to have the value contract for all the materials in the contract.
    I have used assortment module with no use....
    Thanks and regards,
    Pavan P

    Mark teh condition WK00 as header group condition. The target value would be applied for the complete order.

  • Contract target value

    Dear guru.
    I have a contract with release strategy.
    I change target value and the release strategy is reset.
    I have created a purchase order before change contract target value.
    If i change the purchase order value the system check if this change exceed the contract target value(EKKO-KTWRT) . But this new value isnu2019t released !!
    For me the system must check that the purchase order change exceed the  total value at time of release(EKKO-RLWRT).
    What do you think about this ?

    Thanks ,
    but why the system consider contract target value and don't consider contract total value at time of release ?

  • Contract Target Value to PO

    Dear All,
    I am having a Service PR with value 2,695,929.00 USD, also one contract with Target Value 7000000 SAR, but in the service specification of contract, value is 5.00 SAR.
    Now I had created release order with ref to both PR and Contract, and PO had captured 5.00 SAR from contract service specification. But the buyer had changed the currency as well as value in PO to 2,695,929.00 USD which exeeds contract value. System message 06/042 and SE/347 is set to the status "E". Still for the above process system not showing Error "Target value of contract & exceeded by & &".
    Please advice.
    Regards

    Hi,
    As you are for target value set  error message {appl 06 and Msg No 155 to "E"(error msg)} in following path:
    SPRO->MM> Purchasing> Environment data>Define attibutes of system message-->system message
    Regards,
    Biju K

  • Contract value exceeding in Release order

    Hi  All,
    The target value of the value contract is 200,000 INR. After reaching to the 190,000 INR ( Making different Release order ) the user has made one more purchase order for this value contract with the value 50,000. The system hasnt given any warning /error message that the contract value exceeding...
    In general system should have to give the error message that the contract value is exceeding???
    The message 06-042 & 06-155 set as error message.
    also if your trying to make release order of more than 200,000 INR then it is giving error message 06-42 the value is exceeding
    Please suggest
    Thanks & Regards
    Rajesh

    Please check your release order qty set in contract item / header details

  • Release PO created more than target value in contract

    System at times creates release PO even though the accumulated value of released Purchase orders is greater than contract target value.  We have the config settings in place to stop this.  And it works OK all the time but fails sometimes !.  We have batch job in place that runs every 20 minutes to create release POs.  We are able to see in the job log (at 2:00 pm run) that system has stopped release PO creation.  In the next run (at 2:20 pm), it has created the PO strangely!  We checked if there is any change (config, variant, PR, contract) in this 20 minutes time gap between batch job runs but there is not any.
    This issue is not replicable.  It does not happen often.  But couple of weeks back it happened once.  And it has happened today.  Any pointers would be helpful.
    Below is the screenshot of 2:00 pm run
    Below is the screenshot of 2:20 pm run

    Hi,
       It seems the message 06 042 was not issued in 2.20 job run. Hope the issue can be resolved by the KBA: 1929354 - Message 06 042 'Target value of contract & exceeded by & &' or the note:  1590695 - 06042 - target value check in release order fails
       Please refer the KBA and revert back.
    Regards,
    AKPT

  • Error message in sales order against target value contract

    Hi experts
    I have value contracts scenario, when I create a Release Orders thatu2019s exceeds the value of the contract the system raise a message error, but in this case the decimal expression in wrong.
    The decimal expression of the country is 1.234.567,89
    The decimal expression of my user is 1.234.567,89
    Example:
    The contract value is 10.000
    I create a release order for 15.000
    The message error is "Target value in contract &1, item &2 is exceeded by 50.00", the correct messages should be: "Target value in contract &1, item &2 is exceeded by 5.000,00"
    I release two errors, the decimal expression according to my user and country doesn't match or the validation is doing some conversion.
    Do you have any idea was wrong??
    Thanks in advanced any input is really appreciated
    Susana

    Hi Susan.
    Just select the error message in the log  and click technical info . In the performance assistant it will show like :
    Technical Data
    Message type__________ E (Error)
    Message class_________ ZCRM_CSI_UI (Messages for UI of Leasing)
    Message number________ 022
    Message variable 1____ 
    Message variable 2____ RK78
    Message variable 3____ 0000001000
    Message variable 4____ 185124 020(Task:0000003105)
    Message Attributes
    Level of detail_______ 
    Problem class_________ 1 (very important)
    Sort criterion________ 
    Number________________ 1
    Environment Information
    Object Type___________ 15
    Logical Key___________ 
    Object GUID___________ DE3B1C475098F9F187E4002264F648B2
    Object Type___________ A
    Message class_________ 
    Save message__________ X
    Message no longer erro
    This will give you details of what  internal values are getting used for calculation . If you can give the error message class and error message number probably i can help u out.
    Regards
    Apoorva

  • Release Value Exceeded Contract

    Hi,
    I had contract created with target value 0. PO was raised against this contract with value 200.
    When I perform a check on the contract, I got this error message:
    684 Released value 200.00 SGD exceeds the target value 0.00 SGD
    However, there's no error message for PO. Should be the error message prompt at PO instead of contract?
    Thanks.

    Hi,
    Please search for OSS notes and report a OSS for it. The standard should works for it.
    Regards.

  • Contract Version not created when WK Contract (target value) is changed.

    Hi there,
    Problem with the Version Management on a WK Contract.
    When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
    Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
    We receive the following message when we change the targ. value:
    "No new version created because a message has not yet been transferred"= Message 027
    Can anyone help or advise?
    Many thx.

    We receive the message on some of the contracts.
    Therefore it can't be due to the output

  • Open Target Quantity and Open Target Value in Contract

    Hi,
    When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value'  of contract.
    Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
    Thanks,
    Siddhi

    Hi,
    Thank you for the reply.
    I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
    Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
    Can anybody please help me with getting this logic?
    Thanks,
    Siddhi

  • Quantity Contract - target quantity exceed

    Dear Gurus,
    is there a way to stop PO creation with reference to contract when contract target quantity exceed?
    Warm regards,
    Fuffo

    Ciao Fuffo,
    spro -> material management -> purchasing -> defien attribute of sysetm message, select :
    version 00
    appl.    06
    number 078 (Target quantity exceeded by  & &)
    set the catergory of the message to E... and save
    now when ypu create a PO in reference to MK contract and the quantity is greater than the contract quantity System stop you with an error message.
    Buona Giornata
    Mauro

Maybe you are looking for

  • XBMC freezes with free Radeon driver and VDPAU (Mesa 3D 9.2)

    Hello! I am currently setting up a HTPC with AMD A4-5300 with the integrated Radeon HD 7480D. To avoid the trouble with the fglrx driver, I would like to use the free xf86-video-ati driver. I thought this would be no problem since the update to Mesa

  • "Internal server Error" for file post request

    client side package example.fc; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import javax.microedition.io.Connector; import javax.microedition.io.HttpConnection; import javax.microedition.io.file.FileConnection

  • Hiding Payment / Receipt Tab in Cash Journal

    HI Experts Please tell me how i can Hide Payment / Receipt Tab in Cash Journal Full point will awards... MAZ

  • Adobe Application Manager "There was an error downloading this update"

    I have recently upgraded my PC (new motherboard, CPU, memory, etc) and have reinstalled my copy of Photoshop CS5 Extended. I forgot to deactivate my copy prior to formatting my hard drive. Adobe application manager is telling me that I have multiple

  • Installing shockwave - MAC

    I'm having problems installing the lastest version of the shockwave player I am logged in as admin as the FAQ suggest but it doesnt work I've tried unistalling and reinstalling the player but I still get this error message everytime I try and load a