Task Sequence Windows Server 2012 format and partition issue when using MDT2012

Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D. 
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk. 
Anyone seen this behavior?

I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

Similar Messages

  • Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

    The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
    http://bit.ly/1pYZT3F
    Thanks -
    James McIllece

    hello again,
    meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
    http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
    Likely to be overseen at the end of one paragraph it says:
    "Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
    Question : Is this an official statement and is it still valid with most recent
    Windows Server 2012 R2 that NFS client does NOT support NFSv4.x  ??
    thanks - Rainer

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • I have windows server 2012 R2 and install active directory

    My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
    Have not registered domain only install active directory to test. 
    So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
    software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine. 
    Please give me a solution for this.
    This is the setup for a test use only so their not big environment connect with my pc.
    Thanks in advance.
    Regards,
    Krunal

    Hi,
    The following article is talking about creating and managing Group Policy on a Windows Server 2012:
    http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
    As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
    Group Policy Overview
    http://technet.microsoft.com/en-us/library/hh831791.aspx
    Please feel free to let us know if you need further assistance.
    Regards.
    Vivian Wang

  • Hyper-v Role in Windows Server 2012 foundation and Essentials

    Hello,
    I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
    Can you please tell me what is possible :
    -The server can not be installed as a hyper-v  guest (probably yes)
    -The hyper-v role can not be installed on the server (so I have to rely on vmware)?
    - Hyper-v role can be installed but there is no free license included with the server.
    Thank you
    Marc

    I suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
    Then run your Server 2012 Foundation under Win8.  which has 512GB Memory Limit.
    It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8.  (Or Sun Virtual Box (free) (or VmWare(Free).
    So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8.   ;)
    What good is it if your can't run Hyper-V and Remote desktop services?  Those are the two apps small business need most.  But Microsoft strips it out, calls it a DEAL  (Essentials and Foundation) , yet if you want the good stuff, you're gonna
    have to buy Server 2012 Standard anyhow, + the CALs.
    So you are hooked into this "deal" by Microsoft Special Offer.   Its special alright, because you get to buy it twice.  The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
    you AD, and thats it.  Nothing Else.  No "deal"
    Remember:
    All you get with Foundation or Essentials is AD and Group Policy.
    You cannot load RDP on Foundation or Essentials
    You cannot load Exchange on a DC, or Foundation or Essentials
    You cannot load Exchange and RDP on the same box.
    You cannot have Remote Web Apps if you load RDP on your DC.
    You cannot win with Microsoft.  No worthwhile "deal" has ever come out of the city of Redmond.
    The internet is a one-way money pipeline to Microsoft.
    Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.  
    Might as well purchase 2 Server 2013 Standard Editions if you want:
    1.) Active Directory
    2.) Remote Desktop and Remote Apps
    3.) Your own Exchange Server
    You are better off installing a NAS if all you need is a file server. 
    Why bother with Foundation or Essentials?  Its a "Gimmick-ware"

  • Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

    Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
    downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

    Hi,
    Agreed with DonPick.
    Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
    More information regarding Internet Explorer 11, please check:
    Internet Explorer 11 - FAQ for IT Pros
    http://msdn.microsoft.com/en-us/library/dn268945.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

    Hello,
    we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
    Errors:
    There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
    >Get-DAConnectionStatus
    Status    : Error
    Substatus : CouldNotContactDirectAccessServer
    >Get-NetIPHttpsState
    LastErrorCode   : 0x0
    InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
    Setup:
    Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
    successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
    been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
    The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
    setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
    Diagnosis:
    So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
    access the NLS-Website located on the server, which worked fine).
    Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
    Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
    on the URL returning HTTP-200 and no content.
    I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
    Regards
    Matthias

    Hi,
    In addition, have you disabled the DA client components on the DA client? If no, please also check
    the settings on the Name Resolution Policy Table.
    More information:
    DirectAccess
    Client Location Awareness – NRPT Name Resolution
    In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
    registry or corrupt drivers. For more detailed information, please refer to the link below:
    Error 1225 - Error Code 0x4C9
    Note:
    Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Susie

  • DirectAccess Windows Server 2012 R2 and Windows 8.1 - status connecting

    I've successfully deployed DirectAccess on Windows Server 2012 R2 in a 2 node NLB cluster. Everything in the console is green and I can see clients connecting.
    Windows 7 clients can connect and with the DirectAccess connectivity assistant installed show as connected and I can access resources.
    On a Windows 8.1 client I can access resource and run the troubleshooting tool which reports no errors, but if I look at connections it shows as connecting and the status never changes to connected. Clients work correctly when on the internal network.
    I've looked at available hotfixes, but not found anything for when the status is incorrectly shown.
    Any ideas before I raise a support call?
    James Saunders

    Hi,
    You current information hardly determine which part may occur error, I found the similar symptom on the following third party article, may can give you some help.
    The similar issue third party article:
    Windows 8 DirectAccess client keeps saying "Connecting"
    http://tfs.letsblog.it/post/2013/07/10/Windows-8-DirectAccess-client-keeps-saying-Connecting.aspx
    More information:
    The Network Connection Status Icon
    http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • FastTrack Reference architectures for Windows Server 2012 R2 and SQL Server 2012?

    The latest Fast Track DW Refrence guide refers to Windows 2008 R2...is there a new guide that includes Windows Server 2012 R2?
    Here is the link for the word doc that describes the architecture requirements
    http://technet.microsoft.com/en-us/library/hh918452.aspx

    Hi Chuck,
    According to your description, in deed, there is only introduce that the default settings should be used for the Windows Server 2008 R2 Enterprise operating system in document. However, personally, there is also apply to the platform of windows server 2012
    R2. I recommend you that submit the requirement at https://connect.microsoft.com/SQLServer/. 
    If the requirement mentioned by customers for many times, the product team may consider to add this feature in the future version. Your feedback is valuable for us to improve our products and increase the level of service provided.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Maximum number of processor sockets in Windows Server 2012 Datacenter and Standard

    I have found no documentation on the technical number of supported processor sockets supported by Windows Server 2012 for the Standard and Datacenter editions.
    Some donation websites like Techsoup claim that Datacenter supports 64 physical processors and Standard 8, but I can find no authoritative confirmation of this and those look like extrapolation from Windows Server 2008 R2.
    So what are the maximum supported # of processor sockets, assuming you have licenses for all of them, for Datacenter and Standard? Do they differ by edition?
    In addition, is it true that the total # of supported logical processors in a single system is 640 w/o Hyper-V? It was originally reported to be that, but since Hyper-V's number doubled from 160 in the Beta to 320 in the RC and RTM, did this double too?

    You might find some of the information you are looking for here -
    http://download.microsoft.com/download/2/C/A/2CA38362-37ED-4112-86A8-FDF14D5D4C9B/WS%202012%20Feature%20Comparison_Hyper-V.pdf.  I know there is one change that is not reflected there.  Recently the maximum number of virtual machines supported
    in a cluster was raised to 8,000 instead of the 4,000 reflected in this document.
    The maximum number of sockets for Standard would be two because that is the maximum number that the license supports.  Standard has never supported 8.  Prior to 2012, it supported 4, and then the licensing changed with 2012 so that Standard would
    be sold per processor (socket) with a maximum of two.  Technically, the binaries are the same for Standard and Datacenter, so you can most likely get it to run with more somehow, but it is not a supported configuration.
    The maximum number of sockets for Datacenter would be 64 - that has not changed from 2008.  I make this statement based on the fact that Datacenter supports a maximum of 64 virtual CPUs when run as a virtual machine.  Virtual machines don't have
    the distinction of socket versus hyper-thread versus core.  They see what is presented to them as a processor.  But, I doubt very much that you will find any off-the-shelf 64 socket systems; most vendors are relying on the core densities instead
    of socket density in order to deliver the horsepower.  The above referenced document still shows 320 as the maximum number of logical processors, with or without Hyper-V.
    tim

  • Windows Server 2012 Standard and Essentials User CAL's

    I've been running Windows Server 2012 Essentials in an organization that until recently stayed within the 25 user 50 network device limit specified by the license. Eventually we've grown beyond that. Since the Server 2012 Essentials machine had a non-transferable
    OEM license I decided not to waste it by doing an in-place migration to Server 2012 Standard, and instead set up a new server with freshly purchased Server 2012 R2 Standard and migrated Active Domain roles to it, leaving the original server as a part of a
    fail-over cluster.
    We purchased 30 User CAL's for the 2012 R2, as required for 25+ staff members.
    Now I am curious. The 2 servers that we have right now (2012 R2 Standard and 2012 Essentials) both maintain the same Active Directory and manage the same pool of users and workstations. Does that mean that the primary server with 30 User CAL's takes dominance
    and sets the limit as to how many people are allowed to access the network. Or does it become a combination of purchased 30 CAL's + 25 Users hard-wired into the 2012 Essential edition?
    Do these servers have to run separate domains with segregated pools of users in order to be license compliant for 30+ users or can they exist within the same same domain preserving individual user limits? What if the 2012 Essentials server maintains
    one office location with fewer than 25 staff and the Standard R2 2012 server runs another office with fewer than 30 staff, while both offices are linked via a VPN for the purpose of sharing 3rd party licenses? Do individual user limits apply, or is it still
    30 users max?
    To sum up the question, I'd like to know whether I'd need to buy more user CAL's when we reach more than 30 staff at 1 or possibly 2 office locations.
    Oh, and the device limit! 2012 R2 Standard under user CAL licensing scheme has no machine limits. Essentials is always capped at 50. When running one active directory, what's the legally allowed number of devices on the network? I assume it's unlimited.
    Thanks.

    Thank you for the reply.
    My question then is how to transition while preferably keeping both physical servers.
    Should a 2012 Standard key be purchased additionally for an in-place transition of 2012 Essentials machine to 2012 Standard (which at this point is as good as a fresh install)? Until then, should the Essentials 2012 server be taken offline entirely?
    What about the situation where I described both servers running segregated networks with their own pools of users, only connected via a VPN for 3rd party license sharing? Is that configuration supported?
    Also, if the configurations is unsupported, why are the servers able to share roles in first place? Why isn't there a software mechanism preventing interaction? What configuration do the servers themselves assume is in place?
    Thanks again.

  • Exchange 2013 Windows Server 2012 NLB and DAG on the same server

    Hi all, I am installing Exchange 2013 infrastructure with two servers. 
    Both servers have the CAS and Mailbox roles. 
    For mounting on High Availability, will create a DAG. 
    Client Access I have no external Network Load Balancer. 
    I thought about installing the NLB servers in the DAG members, this could not be done before. 
    I do not know if in Windows Server 2012 and Exchange 2013 
    Can I install NLB on members of a DAG? 
    regards
    Microsoft Certified IT Professional Server Administrator

    Hi,
    I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
    role running on separate servers.
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
    Thanks,
    Angela Shi
    TechNet Community Support

  • October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

    Hello all,
    After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
    The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
    The job was cancelled. The user either cancelled the job or modified the associated protection group.
    Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
    Thnks, Andrea

    Hi Andrea,
    Have you installed the update 2919355?
    To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
    According to the official website, the issue which you described is not listed as the known issue.
    Please uninstall this update and continue to monitor the official website for the latest news.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Licensing help needed for datacenter server with vm running windows server 2012 essentials and ten virtual desktops for remote access

    NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops.  Each desktop for one remote user running office 2013.  Is there a better configuration?
     In either case what licenses does the NPO need to purchase?
    Bob

    Hi,
    For license related questions we recommend you contact Microsoft licensing specialist.
    http://support.microsoft.com/kb/141850/en-us
    Regards.
    Vivian Wang

  • Windows Server 2012 Essentials and Microsoft SQL Server 2014 Standard Core Edition

    Our company is planning to buy Windows Server 2012 R2 Essentials edition (Volume license) and install it on Citrix Xenserver based virtual machine with 4 virtual processor cores. Can we install Microsoft SQL Server 2014 Standard Core Edition (2 licenses
    for 2 cores) and run it on this virtual machine?

    you can install SQL Server Standard 2014/2012 on the Essentials Windows Server but without Server core Installation while installing SQL Server 2014 is supported on the Server Core mode of the following editions of Windows Server:
    Windows Server 2012 R2 Datacenter 64-bit
    Windows Server 2012 R2 Standard 64-bit
    Windows Server 2012 Datacenter 64-bit
    Windows Server 2012 Standard 64-bit
    Windows Server 2008 R2 SP1 Datacenter 64-bit
    Windows Server 2008 R2 SP1 Enterprise 64-bit
    Windows Server 2008 R2 SP1 Standard 64-bit
    Windows Server 2008 R2 SP1 Web 64-bit
    http://msdn.microsoft.com/en-us/library/ms143506.aspx
    thanks
    diramoh
     

Maybe you are looking for

  • Load times seem long

    This is my first website I'm doing completely in Edge Animate, which I love, by the way. http://www.mercerhrs.com/marcomm_world/index.html It seems that between pages, the load time seems a bit longer then I'm used to. If you click on some of the bui

  • Pass date parameters to dataprocessor in Java

    Hello I have created java class to execute data templates, but I have problem when I pass date parameters as it was from application dataprocessor fails without any error message and does not return any data (except output xml file header). How to pa

  • Mac 'n' windows partitioning

    Hey all, ok i've gone and done something a little rude and put windows xp on my mac (leopard) when i installed windows i partitioned 5% of my hardrive now i wish to patition a little more 10 - 15% how do i go about doing this? thanx.

  • Reports for Audit

    Dear All, Please tell me list of reports which are useful for audit purpose. Or Any other way where we find list of reports which are useful only for audit purpose. Regards, Mahesh Wagh

  • Drop down menus in CS4

    To be specific, would these drop down menus on this page http://www.flashden.net/category/flash/menus-buttons/horizontal-menus work in CS4? Cam Flash CS4 create drop down menus without getting into scripting? If so, is it like DW? Want to do a site l