Task status: Not Authorized

Hello:
I just upgraded from ARD2 to ARD3 and am no longer able to generate reports. Whenever I try, the Task Status column reads; Not Authorized (with a red exclaimation point). I am able to observe and control computers, but cannot generate reports, which I had been able to do in version 2. Thanks for any help with this.

Hi,
I have the same problem here, where some clients are able to be reported and other not ("! Not Authorized" immediately after starting the report).
I have just find a (curious) workaround:
1. Select the client(s), go to Report > User history, select "Rebuild data for report" and press "Generate Report". You will obtain as result a "! Couldn't collect report data" error.
2. Select the client(s) and go to Report > Administration Settings... Check all fileds to be included in report an press "Get Report". For me all fields are "on" expected "Collect Application Usage Data" and "Collect User Accounting".
3. Try to report again. For me it works. I have tried to report "Software Version..." what failed on 8 for 13 computers (all running 10.4.5) and after this trick it works fine.
Regards,
Yann

Similar Messages

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

Task Status not Showing Cost Budget

Dear All..
Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
I have run Update and REfresh Project Summary....
What could be the reason.. Please help...
Many thanx.

Hi
check the PA periods and current reporting period.
Regrads

Send UNIX Command - This task will fail. This task is not authorized...

Whenever i try to use the "Send UNIX Command" feature, i always get a "not authorized" error.
The machines are connected through a switch, they are not firewalled.
How can i resolve this?
G5 Mac OS X (10.4.8)

You probably don't have the appropriate access privileges set for your user.
Page 60 of the manual has a list, but you need the following privileges enabled:
- Open & quit applications
- Change Settings
- Delete & Replace Items
- Restart & Shut down
- Copy Items

Task status is not changed in UWL

Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
Thanks ,
Sarath

Hi,
Unfortuntely, there does not seem to be a 'working' workaround for the issue.
This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
Please see /thread/1564782 [original link is broken]
Regards,
Srikishan

You are not authorized[...] while completing bpm task.

Hello community,
i am facing a strange problem while completing bpm tasks. System is 7.3.1 SP5. User opens bpm task out of UWL or directly via link out of a email. The task UI is a WD4J component. Claiming works fine, UI is shown and user can work with it but on completion, an exception occours and the task does not complete and stays in the UEL. All the WD4J logic on completion is executed correctly before the exception occours. This only happens in about 1 out of 100 cases and i can not recreate it on purpose. Anyway this is very very annoying in the productiv system since the user thinks the task is completed correctly and clicks it away. By the way, the user ofcourse is authorized via relevant bpm roles and can complete other tasks as well.
Here a part of the stacktrace:
Thanks for your help.
BR Tobias.

Hi Tobias,
the task was opening successful and the WD was working fine. But the triggering of the completion event was not possible.
It was fixed with patches as described in note 1811953 - Direct link to task execution UI does not work for CHIP UI
Regards,
Vasilis

Lightroom 5 issue with publish to facebook export plugin: not authorized status

Hi,
trying to connect Lr 5 to fb and being stuck at the authorization process.
In the facebook publish plugin within Lr I hit the 'authorize on facebook'.
IE is launched, facebook opened and it guides me throug the usual step, everything looking normal and fine.
Facebook finally states the app is added and authorized (this is showing up under apps as well looking good).
However Lr is taking a moment to realize the authorization process is done, but then it goes to 'not authorized' status instead of authorized.
I simply tried doing it again, it restarts the process but facebook than gives an error.
I assumed this was due to the app already being there listed under authorized apps, so I removed the app on facebook. fb worked again through the process, but Lr keeps getting not authorized out of it while it is perfectly fine and authorized looking on facebook..
Umm.. help?
Thanks for any clues, I'm a bit well clueless right now ;p
Cheers

Hello,
this is a Facebook problem and not a Lr problem !
Go into Facebook, open your account and go into account settings. There you will find a passage called apps, open it and you see all programs and apps that are allowed to 'play' with your account. There you will find Adobe Photoshop Lightroom in the list. Delete it from there, so that Lightroom has no more the permission to do anything with your Facebook account.
After this, go into Lightroom, chose the exporting services for Facebook, right click on it and connect it to Facebook with your account name and password like you did it before.
That should solve the problem in complete !
Good luck
Robert

Macbook Pro freezes periodically, S.M.A.R.T status not apprearing in DiskUtility

My MBPro is having severe slowdown/freezes. It will take a break lasting 45 seconds to 2 minutes, usually every 3-5 minutes. It is not application specific. It can either be a browser running all by itself, or Outlook all by itself. I've fully removed Firefox and reinstalled, removed allplugins from all browsers, and nothign seems to affect it in any way.
I've cleared everything off the HD that I can, and I now have about 125GB free on the HD. I've run all of the repair and verify options available in Disk utility, Verify and Repaired both disk permissions and disk. The S.M.A.R.T. status no longer shows at all in the lower portion of the Disk Utility window. Onyx claims "SMART status not supported" for the drive (see below for model number), while the Volitans SMART utility does recognize it, and reports 5090 Power On hours, no pending bad sectors, 0 bad sectors of any type, and no errors.
I'm fully backed up using Time Machine, and all of my user files are backed up and current on BackBlaze. I'm fortunate enough to have active AppleCare on the unit, but I was hoping I could get some suggestions that would allow me to avoid traveling to the Apple Store. They're great people, just far away.
Thanks for any suggestions you might have!
Ed M.
MacBook Pro (15-inch, Mid 2012), MacBookPro9,1
1TB factory installed disk, APPLE HDD HTS541010A9E662
16GB DDR3 memory
OSX Yosemite, 10.10.1, fully updated

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can't enroll device for user and this user account is not authorized to use Windows Intune.

Hello,
We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
I hope someone can help me
Kind regards,
Robben

I added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
I can see the user in the intune management portal. Does this means it has been synced?
Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
they all synced already and the log doesn't show them anymore?
A warning in this log shows this also:
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
I don't know if that has anything to do with this?
this is an extract of that log:
CCloudUserSync::Process - User sync processing thread is now stopping.   SMS_CLOUD_USERSYNC   23/04/2014 14:59:42   8144 (0x1FD0)
SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04).   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7572 (0x1D94)
CCloudUserSync::Process - User sync processing has started.   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
Starting user sync ...   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
kind regards,
Robben

Remote Software Updates and Sending Task Status to User

I am updating user's machines using ARD 3 with the unix command 'softwareupdate -i -a'. With some updates, a restart is required and ARD posts this within the task status column.
I was wondering if there was a way to grab that task status of "restart needed" or "succeeded" and then send that to the user when the software update has completed.
Any help would be appreciated.
Thanks.

System restart checkbox is used to control what happens outside of MW.
If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not.

Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only

After installation fo ECC6,When I am trying to connect to visual admin,I am getting given below error.
I am also not able to login to NWA
Application cannot be started.
Details:
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001A6B16F0004A600094A9828#1308418992937#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001A6B16F0004A6000C292AF0#1308419041078#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001A6B16F0004A6001D1853B8#1308419325187#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400000000000001CA1A680004A6008F78FF48#1308421244125#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001CA1A680004A600919BB068#1308421279953#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001CA1A680004A6009220F598#1308421288687#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001CA1A680004A60097A70598#1308421381359#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400040000000001CA1A680004A6009867E880#1308421394000#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-46,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400000000000001402EEB0004A600E643EE28#1308422700265#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
Any help would be highly appreciated.
Thanks
Sukrut

Hello,
If you have a installation of dual stack(ABAP + JAVA) system.. check in SU01 transaction if SAP_J2EE_ADMIN role is assigned to the J2EE_ADMIN user. If not, please assign it.
For only JAVA stack systems, default administrator user is Administrator.
thanks
ashish

The hostname test01 is not authorized to be used in this zone cluster

Hi,
I have problems to register a LogicalHostname to a Zone Cluster.
Here my steps:
- create the ZoneCluster
# clzc configure test01
clzc:test01> info
zonename: test01
zonepath: /export/zones/test01
autoboot: true
brand: cluster
bootargs:
pool: test
limitpriv:
scheduling-class:
ip-type: shared
enable_priv_net: true
sysid:
name_service not specified
nfs4_domain: dynamic
security_policy: NONE
system_locale: en_US.UTF-8
terminal: vt100
timezone: Europe/Berlin
node:
physical-host: farm01a
hostname: test01a
net:
address: 172.19.115.232
physical: e1000g0
node:
physical-host: farm01b
hostname: test01b
net:
address: 172.19.115.233
physical: e1000g0
- create a RG
# clrg create -Z test01 test01-rg
- create Logicalhostname (with error)
# clrslh create -g test01-rg -Z test01 -h test01 test01-ip
clrslh: farm01b:test01 - The hostname test01 is not authorized to be used in this zone cluster test01.
clrslh: farm01b:test01 - Resource contains invalid hostnames.
clrslh: (C189917) VALIDATE on resource test01-ip, resource group test01-rg, exited with non-zero exit status.
clrslh: (C720144) Validation of resource test01-ip in resource group test01-rg on node test01b failed.
clrslh: (C891200) Failed to create resource "test01:test01-ip".
Here the entries in /etc/hosts from farm01a and farm01b
172.19.115.119 farm01a # Cluster Node
172.19.115.120 farm01b loghost
172.19.115.232 test01a
172.19.115.233 test01b
172.19.115.252 test01
Hope somebody could help.
regards,
Sascha
Edited by: sbrech on 13.05.2009 11:44

When I scanned my last example of a zone cluster, I spotted, that I added my logical host to the zone clusters configuration.
create -b
set zonepath=/zones/cluster
set brand=cluster
set autoboot=true
set enable_priv_net=true
set ip-type=shared
add inherit-pkg-dir
set dir=/lib
end
add inherit-pkg-dir
set dir=/platform
end
add inherit-pkg-dir
set dir=/sbin
end
add inherit-pkg-dir
set dir=/usr
end
add net
set address=applh
set physical=auto
end
add dataset
set name=applpool
end
add node
set physical-host=deulwork80
set hostname=deulclu
add net
set address=172.16.30.81
set physical=e1000g0
end
end
add sysid
set root_password=nMKsicI310jEM
set name_service=""
set nfs4_domain=dynamic
set security_policy=NONE
set system_locale=C
set terminal=vt100
set timezone=Europe/Berlin
end
I am refering to:
add net
set address=applh
set physical=auto
end
So as far as I can see this is missing from your configuration. Sorry for leading you in the wrong way.
Detlef

What are the attributes available on Task Status Notification?

Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

SAP Fiori Apps Error Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION].

Dear All
I am getting the below error while activating the sap Fiori applications
Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION] (error).
I have applied all suggestions in my new fiori system from Masayuki Sekihara posted on his post.
but still I am getting same error message.
I got below error message.
1) If I selected a EC6FIORI system alias to ZTASKPROCESSING services then i got below error message.
Task Facade not implemented for provider.
Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION] (error).
2) some time I got different error message if I selected FIORI system alias to ZTASKPROCESSING.
I have shared below my system Support Package level and all configurations.
Component
Release
SP-Level
Support Package
Short description of comment
SAP_BASIS
740
4
SAPKB74004
SAP Basis Component
SAP_ABA
740
4
SAPKA74004
Cross-Application Component
SAP_GWFND
740
6
SAPK-74006INSAPGWFND
SAP Gateway Foundation
SAP_UI
740
7
SAPK-74007INSAPUI
User Interface Technology
PI_BASIS
740
4
SAPK-74004INPIBASIS
Basis Plug-In
ST-PI
2008_1_700
8
SAPKITLRD8
SAP Solution Tools Plug-In
SAP_BW
740
4
SAPKW74004
SAP Business Warehouse
IW_PGW
100
5
SAPK-10005INIWPGW
Process Gateway
MDG_FND
747
2
SAPK-74702INMDGFND
MDG Foundation
SAP_AP
700
30
SAPKNA7030
SAP Application Platform
SAP_BS_FND
747
2
SAPK-74702INSAPBSFND
SAP Business Suite Foundation
WEBCUIF
747
2
SAPK-74702INWEBCUIF
SAP Web UI Framework
MDG_APPL
617
2
SAPK-61702INMDGAPPL
MDG Applications
SAP_APPL
617
2
SAPKH61702
Logistics and Accounting
SAP_FIN
617
2
SAPK-61702INSAPFIN
SAP_FIN
SAP_HR
604
66
SAPKE60466
Human Resources
SAP_HRCAR
604
66
SAPK-60466INSAPHRCAR
Sub component SAP_HRCAR of SAP_HR
SAP_HRCAT
604
66
SAPK-60466INSAPHRCAT
Sub component SAP_HRCAT of SAP_HR
SAP_HRCAU
604
66
SAPK-60466INSAPHRCAU
Sub component SAP_HRCAU of SAP_HR
SAP_HRCBE
604
66
SAPK-60466INSAPHRCBE
Sub component SAP_HRCBE of SAP_HR
SAP_HRCBR
604
66
SAPK-60466INSAPHRCBR
Sub component SAP_HRCBR of SAP_HR
SAP_HRCCA
604
66
SAPK-60466INSAPHRCCA
Sub component SAP_HRCCA of SAP_HR
SAP_HRCCH
604
66
SAPK-60466INSAPHRCCH
Sub component SAP_HRCCH of SAP_HR
SAP_HRCCL
604
66
SAPK-60466INSAPHRCCL
Sub component SAP_HRCCL of SAP_HR
SAP_HRCCN
604
66
SAPK-60466INSAPHRCCN
Sub component SAP_HRCCN of SAP_HR
SAP_HRCDE
604
66
SAPK-60466INSAPHRCDE
Sub component SAP_HRCDE of SAP_HR
SAP_HRCDK
604
66
SAPK-60466INSAPHRCDK
Sub component SAP_HRCDK of SAP_HR
SAP_HRCES
604
66
SAPK-60466INSAPHRCES
Sub component SAP_HRCES of SAP_HR
SAP_HRCFI
604
66
SAPK-60466INSAPHRCFI
Sub component SAP_HRCFI of SAP_HR
SAP_HRCFR
604
66
SAPK-60466INSAPHRCFR
Sub component SAP_HRCFR of SAP_HR
SAP_HRCGB
604
66
SAPK-60466INSAPHRCGB
Sub component SAP_HRCGB of SAP_HR
SAP_HRCHK
604
66
SAPK-60466INSAPHRCHK
Sub component SAP_HRCHK of SAP_HR
SAP_HRCID
604
66
SAPK-60466INSAPHRCID
Sub component SAP_HRCID of SAP_HR
SAP_HRCIE
604
66
SAPK-60466INSAPHRCIE
Sub component SAP_HRCIE of SAP_HR
SAP_HRCIN
604
66
SAPK-60466INSAPHRCIN
Sub component SAP_HRCIN of SAP_HR
SAP_HRCIT
604
66
SAPK-60466INSAPHRCIT
Sub component SAP_HRCIT of SAP_HR
SAP_HRCJP
604
66
SAPK-60466INSAPHRCJP
Sub component SAP_HRCJP of SAP_HR
SAP_HRCKR
604
66
SAPK-60466INSAPHRCKR
Sub component SAP_HRCKR of SAP_HR
SAP_HRCKW
604
66
SAPK-60466INSAPHRCKW
Sub component SAP_HRCKW of SAP_HR
SAP_HRCMX
604
66
SAPK-60466INSAPHRCMX
Sub component SAP_HRCMX of SAP_HR
SAP_HRCMY
604
66
SAPK-60466INSAPHRCMY
Sub component SAP_HRCMY of SAP_HR
SAP_HRCNL
604
66
SAPK-60466INSAPHRCNL
Sub component SAP_HRCNL of SAP_HR
SAP_HRCNO
604
66
SAPK-60466INSAPHRCNO
Sub component SAP_HRCNO of SAP_HR
SAP_HRCNZ
604
66
SAPK-60466INSAPHRCNZ
Sub component SAP_HRCNZ of SAP_HR
SAP_HRCPH
604
66
SAPK-60466INSAPHRCPH
Sub component SAP_HRCPH of SAP_HR
SAP_HRCPT
604
66
SAPK-60466INSAPHRCPT
Sub component SAP_HRCPT of SAP_HR
SAP_HRCQA
604
66
SAPK-60466INSAPHRCQA
Sub component SAP_HRCQA of SAP_HR
SAP_HRCRU
604
66
SAPK-60466INSAPHRCRU
Sub component SAP_HRCRU of SAP_HR
SAP_HRCSE
604
66
SAPK-60466INSAPHRCSE
Sub component SAP_HRCSE of SAP_HR
SAP_HRCSG
604
66
SAPK-60466INSAPHRCSG
Sub component SAP_HRCSG of SAP_HR
SAP_HRCTH
604
66
SAPK-60466INSAPHRCTH
Sub component SAP_HRCTH of SAP_HR
SAP_HRCTW
604
66
SAPK-60466INSAPHRCTW
Sub component SAP_HRCTW of SAP_HR
SAP_HRCUN
604
66
SAPK-60466INSAPHRCUN
Sub component SAP_HRCUN of SAP_HR
SAP_HRCUS
604
66
SAPK-60466INSAPHRCUS
Sub component SAP_HRCUS of SAP_HR
SAP_HRCVE
604
66
SAPK-60466INSAPHRCVE
Sub component SAP_HRCVE of SAP_HR
SAP_HRCZA
604
66
SAPK-60466INSAPHRCZA
Sub component SAP_HRCZA of SAP_HR
SAP_HRGXX
604
66
SAPK-60466INSAPHRGXX
Sub component SAP_HRGXX of SAP_HR
SAP_HRRXX
604
66
SAPK-60466INSAPHRRXX
Sub component SAP_HRRXX of SAP_HR
EA-IPPE
400
24
SAPKGPID24
SAP iPPE
EA-APPL
617
2
SAPK-61702INEAAPPL
SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS
600
24
SAPKGPDD24
SAP Enterprise Extension Defense Forces & Public Security
EA-FIN
617
2
SAPK-61702INEAFIN
EA-FIN
EA-FINSERV
600
25
SAPKGPFD25
SAP Enterprise Extension Financial Services
EA-GLTRADE
600
24
SAPKGPGD24
SAP Enterprise Extension Global Trade
EA-HR
607
17
SAPK-60717INEAHR
SAP Enterprise Extension HR
EA-HRCAR
607
17
SAPK-60717INEAHRCAR
Sub component EA-HRCAR of EA-HR
EA-HRCAT
607
17
SAPK-60717INEAHRCAT
Sub component EA-HRCAT of EA-HR
EA-HRCAU
607
17
SAPK-60717INEAHRCAU
Sub component EA-HRCAU of EA-HR
EA-HRCBE
607
17
SAPK-60717INEAHRCBE
Sub component EA-HRCBE of EA-HR
EA-HRCBR
607
17
SAPK-60717INEAHRCBR
Sub component EA-HRCBR of EA-HR
EA-HRCCA
607
17
SAPK-60717INEAHRCCA
Sub component EA-HRCCA of EA-HR
EA-HRCCH
607
17
SAPK-60717INEAHRCCH
Sub component EA-HRCCH of EA-HR
EA-HRCCL
607
17
SAPK-60717INEAHRCCL
Sub component EA-HRCCL of EA-HR
EA-HRCCN
607
17
SAPK-60717INEAHRCCN
Sub component EA-HRCCN of EA-HR
EA-HRCDE
607
17
SAPK-60717INEAHRCDE
Sub component EA-HRCDE of EA-HR
EA-HRCDK
607
17
SAPK-60717INEAHRCDK
Sub component EA-HRCDK of EA-HR
EA-HRCES
607
17
SAPK-60717INEAHRCES
Sub component EA-HRCES of EA-HR
EA-HRCFI
607
17
SAPK-60717INEAHRCFI
Sub component EA-HRCFI of EA-HR
EA-HRCFR
607
17
SAPK-60717INEAHRCFR
Sub component EA-HRCFR of EA-HR
EA-HRCGB
607
17
SAPK-60717INEAHRCGB
Sub component EA-HRCGB of EA-HR
EA-HRCHK
607
17
SAPK-60717INEAHRCHK
Sub component EA-HRCHK of EA-HR
EA-HRCID
607
17
SAPK-60717INEAHRCID
Sub component EA-HRCID of EA-HR
EA-HRCIE
607
17
SAPK-60717INEAHRCIE
Sub component EA-HRCIE of EA-HR
EA-HRCIN
607
17
SAPK-60717INEAHRCIN
Sub component EA-HRCIN of EA-HR
EA-HRCIT
607
17
SAPK-60717INEAHRCIT
Sub component EA-HRCIT of EA-HR
EA-HRCJP
607
17
SAPK-60717INEAHRCJP
Sub component EA-HRCJP of EA-HR
EA-HRCKR
607
17
SAPK-60717INEAHRCKR
Sub component EA-HRCKR of EA-HR
EA-HRCKW
607
17
SAPK-60717INEAHRCKW
Sub component EA-HRCKW of EA-HR
EA-HRCMX
607
17
SAPK-60717INEAHRCMX
Sub component EA-HRCMX of EA-HR
EA-HRCMY
607
17
SAPK-60717INEAHRCMY
Sub component EA-HRCMY of EA-HR
EA-HRCNL
607
17
SAPK-60717INEAHRCNL
Sub component EA-HRCNL of EA-HR
EA-HRCNO
607
17
SAPK-60717INEAHRCNO
Sub component EA-HRCNO of EA-HR
EA-HRCNZ
607
17
SAPK-60717INEAHRCNZ
Sub component EA-HRCNZ of EA-HR
EA-HRCPH
607
17
SAPK-60717INEAHRCPH
Sub component EA-HRCPH of EA-HR
EA-HRCPT
607
17
SAPK-60717INEAHRCPT
Sub component EA-HRCPT of EA-HR
EA-HRCQA
607
17
SAPK-60717INEAHRCQA
Sub component EA-HRCQA of EA-HR
EA-HRCRU
607
17
SAPK-60717INEAHRCRU
Sub component EA-HRCRU of EA-HR
EA-HRCSE
607
17
SAPK-60717INEAHRCSE
Sub component EA-HRCSE of EA-HR
EA-HRCSG
607
17
SAPK-60717INEAHRCSG
Sub component EA-HRCSG of EA-HR
EA-HRCTH
607
17
SAPK-60717INEAHRCTH
Sub component EA-HRCTH of EA-HR
EA-HRCTW
607
17
SAPK-60717INEAHRCTW
Sub component EA-HRCTW of EA-HR
EA-HRCUN
607
17
SAPK-60717INEAHRCUN
Sub component EA-HRCUN of EA-HR
EA-HRCUS
607
17
SAPK-60717INEAHRCUS
Sub component EA-HRCUS of EA-HR
EA-HRCVE
607
17
SAPK-60717INEAHRCVE
Sub component EA-HRCVE of EA-HR
EA-HRCZA
607
17
SAPK-60717INEAHRCZA
Sub component EA-HRCZA of EA-HR
EA-HRGXX
607
17
SAPK-60717INEAHRGXX
Sub component EA-HRGXX of EA-HR
EA-HRRXX
607
17
SAPK-60717INEAHRRXX
Sub component EA-HRRXX of EA-HR
EA-PS
600
24
SAPKGPPD24
SAP Enterprise Extension Public Services
EA-RETAIL
600
24
SAPKGPRD24
SAP Enterprise Extension Retail
FINBASIS
600
24
SAPK-60024INFINBASIS
Fin. Basis
ECC-DIMP
600
23
SAPK-60023INECCDIMP
DIMP
ERECRUIT
600
24
SAPK-60024INERECRUIT
E-Recruiting
FI-CA
600
23
SAPK-60023INFICA
FI-CA
FI-CAX
600
23
SAPK-60023INFICAX
FI-CA Extended
HR-CEE
110_604
52
SAPK-60452INHRCEE
HR country version for CEE countries
HR-CEECBG
110_604
52
SAPK-60452INHRCEECBG
Sub component HR-CEECBG of HR-CEE
HR-CEECCO
110_604
52
SAPK-60452INHRCEECCO
Sub component HR-CEECCO of HR-CEE
HR-CEECCZ
110_604
52
SAPK-60452INHRCEECCZ
Sub component HR-CEECCZ of HR-CEE
HR-CEECGR
110_604
52
SAPK-60452INHRCEECGR
Sub component HR-CEECGR of HR-CEE
HR-CEECHR
110_604
52
SAPK-60452INHRCEECHR
Sub component HR-CEECHR of HR-CEE
HR-CEECHU
110_604
52
SAPK-60452INHRCEECHU
Sub component HR-CEECHU of HR-CEE
HR-CEECPL
110_604
52
SAPK-60452INHRCEECPL
Sub component HR-CEECPL of HR-CEE
HR-CEECRO
110_604
52
SAPK-60452INHRCEECRO
Sub component HR-CEECRO of HR-CEE
HR-CEECSI
110_604
52
SAPK-60452INHRCEECSI
Sub component HR-CEECSI of HR-CEE
HR-CEECSK
110_604
52
SAPK-60452INHRCEECSK
Sub component HR-CEECSK of HR-CEE
HR-CEECTR
110_604
52
SAPK-60452INHRCEECTR
Sub component HR-CEECTR of HR-CEE
HR-CEECUA
110_604
52
SAPK-60452INHRCEECUA
Sub component HR-CEECUA of HR-CEE
HR-CEEGXX
110_604
0
Sub component HR-CEEGXX of HR-CEE
HR-CEERXX
110_604
0
Sub component HR-CEERXX of HR-CEE
INSURANCE
600
23
SAPK-60023ININSURANC
SAP Insurance
IS-CWM
600
23
SAPK-60023INISCWM
Industry Solution Catch Weight Management
IS-H
600
34
SAPK-60034INISH
SAP Healthcare
IS-M
600
23
SAPK-60023INISM
SAP MEDIA
IS-OIL
600
23
SAPK-60023INISOIL
IS-OIL
IS-PS-CA
600
23
SAPK-60023INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
23
SAPK-60023INISUT
SAP Utilities/Telecommunication
LSOFE
600
24
SAPK-60024INLSOFE
SAP Learning Solution Front-End
SEM-BW
600
24
SAPKGS6024
SEM-BW: Strategic Enterprise Management
GBAPP002
600
4
SAPK-60004INGBAPP002
GBAPP002
GBHCM002
600
11
SAPK-60011INGBHCM002
HCM Employee Requests (Leave)
GBHCM003
600
9
SAPK-60009INGBHCM003
HCM Manager Approvals (Time, Training, L
SRA002
600
3
SAPK-60003INSRA002
Time Recording OData Integration Compone
SRA010
600
3
SAPK-60003INSRA010
Staffing List OData Integration Componen
SRA017
600
3
SAPK-60003INSRA017
Create Purchase Order OData Integration
SRA018
600
3
SAPK-60003INSRA018
Purchase Order Status Tracking OData Int
UIAPP001
100
4
SAPK-10004INUIAPP001
UIAPP001 100: Add-On Installation
UIAPP002
100
3
SAPK-10003INUIAPP002
UIAPP002 100: Add-On Installation
UIGIB001
100
4
SAPK-10004INUIGIB001
UIGIB001 100: Add-On Installation
UIHCM002
100
4
SAPK-10004INUIHCM002
UIHCM002 100: Add-On Installation
UIHCM003
100
4
SAPK-10004INUIHCM003
UIHCM003 100: Add-On Installation
UISRA002
100
3
SAPK-10003INUISRA002
HTML5 Time Recording
UISRA010
100
3
SAPK-10003INUISRA010
HTML5 Staffing List
UISRA017
100
3
SAPK-10003INUISRA017
HTML5 Create Order
UISRA018
100
3
SAPK-10003INUISRA018
HTML5 Order Status Tracking
please help me to resolve that issue
Regards
Pankaj Kamble

Hi Team,
i have created new post.
SAP Fiori getting error message Check the URL parameters and the scenario definition. To check the scenario definition.
Scenario definition configuration screen short.
2) Also getting bellow error message
Property TaskDefinitionID not found in type WorkflowTask
Did not find error details
{"error":{"code":"005056A509B11EE1B9A8FEA8DE87F78E","message":{"lang":"en","value":"Property TaskDefinitionID not found in type WorkflowTask"},"innererror":{"transactionid":"E6A9CEE388D3F1EC940400155DC8D41B","timestamp":"20140428075136.7780000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"}}}}
Regards
Pankaj Kamble

Task status: Not Authorized

Similar Messages

Maybe you are looking for