Tax Code in case oF ERS for shipment cost

Hi,
We are using Shipment cost documents to calculate the customer freight.
In shipment cost document, we need to transfer the amount to accounting.
In that case system will create PO automatically.
We need to activate ERS for all the vendors, in that case when we transfer the shipment costs to accounting, system is asking to enter Tax code.
We are not using Tax determination at all in shipment cost document.
Can't we use ERS without Tax code?
Where does this Tax code come from into the PO? is it through Tax determination condition technique?
is there any way we can deactivate Tax code?
Please suggest.
Thanks.

For Standard Materials, Tax code is defaulting from Info record.
As freight is a service, we only have Short text in the PO not the material.
Is there any way i can create info record for service materials? so that i can enter tax code in info record and that defaults into PO.
Thanks.

Similar Messages

  • Tax code V0 does not exist for jurisdiction code IN00

    hi mm
    when i am creating a purchase order
    After creating the PO
    when i go to invoice and enter tax code V0 and jurisdiction code i face the error
    Tax code V0 does not exist for jurisdiction code IN00
    Message no. FF718
    Diagnosis
    You have entered tax codes and jurisdiction codes in the G/L account items. The amounts of these items are used as the tax base to check the tax amounts you have entered or to determine the taxes. The system has now determined that one or more of the "tax code / jurisdiction code" combinations do not exist in Customizing.
    System Response
    Calculation of the taxes or checking of the taxes entered had to be terminated.
    Procedure
    Check the tax codes and the jurisdiction codes in the G/L account items or asset items. If these are correct, inform your system administrator.
    Procedure for System Administration
    Change the tax jurisdictions you specified in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions
    i have dne as per thr need in define Define Tax Jurisdictions
    then also i am facing same error
    Regards
    Vinit

    Hi Vinith,
    After maintaining the tax jurisdictions maintain/create the tax codes. Pls ensure tht created tax codes having field of jurisdictions code.
    You created tax codes after tht you defined tax jurisdiction codes then you will get this kind of errors
    Hope its clear still if u hve questions let me know.
    reg
    Durga
    *assign points if the the info is useful

  • Error msg Z1019 when using MIRO 'Tax Code V4 cannot be used for Co Code'

    When trying to post an Invoice for an EU Vendor using MIRO we are getting an error message 'Tax code V4 cannot be used for Company Code &'.  Tax Code V4 is set up via FTXP as an input Tax Code 'Services within the EU' with EU code '5 - Input tax for services - VAT 2010'.  Any ideas or thoughts as to why this Tax code is not working as it should be in this scenario?
    Many thanks in advance for your help & assistance.

    Hi,
    it seems there is a validation raising message Z1 019.
    Go to transaction OB28 and check the existence of the validation.
    Best regards.

  • Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718

    Hi,
    i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
    please advice me and help to resolve this issue is any config missing pls guide me.
    Thanks
    Best regards
    Shital D

    Please check this answered link:
    Juristiction code - Error: FF718
    Cost centre
    Edited by: Afshad Irani on Jun 22, 2010 7:05 PM

  • Tax code O1 does not exist for jurisdiction code CNT5K2L60

    Hi experts,
    When I tried to create billing, i got this error msg:
    Tax code O1 does not exist for jurisdiction code CNT5K2L60
    Tax code O1 should be taxable.
    I know nothing about tax config in SAP so please tell me what to do and the correct t-code for this? Thanks!

    Hello,
    Kindly follow the following link, you will get some hint to tax config required  for your error:
    Tax code does not exist for jurisdiction code
    Tax code EA does not exist for jurisdiction code QC000000
    Or check following SAP Notes
    327431 - FF718: Tax code and jurisdiction code.
    887899 - TAX. "Tax code xx does not exist for jurisdiction code"
    418582 - Transport of tax codes with tax jurisdiction codes
    Thanks & Regards
    JP

  • Tax code I9 does not exist for jurisdiction code SP 3522604

    Hi Friends,
    At the time of posting a document using t-code FB50, we are encountering an error " Tax code I9 does not exist for jurisdiction code SP 3522604".
    Please suggest a solution.
    Tks & Rgds,
    Rahul Jain

    Hi
    Please check the following path
    F.A(New)
    F.A.Global settings(New)
    Tax on Sales/Purchases
    Basic settings
    1.Specify Structure for Tax Jurisdiction Code
    2.Define Tax Jurisdictions
    Please complete the above two steps, then your Jurisdiction code will be mandatory for the tax code in FTXP.
    Rgds
    Murali.N

  • Tax code EA does not exist for jurisdiction code QC000000

    Hi All,
    We are getting this error "Tax code EA does not exist for jurisdiction code QC000000".
    Can anyone suggest on this ?

    Hi All,
    I am still working on this issue and want to add some information based on my analysis and if at all some could suggest something on that it would be very helpful.
    I tried to debug the IDOC which was giving this error and also simultaneously debugged the other IDOC which was successful.
    I found that the failed IDOC is giving this error as when SD_COND_ACCESS Fm is called in the satndard code , the failed IDOC scenario doesn't return any values in condition records table for one of the condition types ZIR1.
    Where as the successful IDOC returns values for condition records table when FM  SD_COND_ACCESS is called for condition type ZIR1.
    Any suggestion ??
    Thanks !
    MK

  • Tax code I9 does not exist for jurisdiction code 7700000000

    Hi all,
    My user is trying to post the trip to finance. While posting she is getting error: Tax code I9 does not exist for jurisdiction code 7700000000. I checked setting of tax code I9 in HR box. Everything looks fine. Can anyone suggest me what are possible reasons behind this error.
    Thanks and Regards,
    Vikrant Deshpande

    does this results get from cluster
    if yes delte the data for that record from cluster
    and rerun the simulation and run the posting

  • Tax code V1 does not exist for jurisdiction code NZ001

    Dear Friends,
    When creating a PO thru ME23N, I get this message "Tax code V1 does not exist for jurisdiction code NZ001". On cheking, I find this has been maintained with valiidity from 01/01/2001 to 31/12/9999.
    Also when I create a Vendor invoice in FI under FB60/FB65, I am able to use this Tax code V1 with jurisdiction  NZ0001 for my US company with a issue and document also shows.
    Why this conflict? what am I missing?
    Best Regards
    Rajesh

    Hi,
    is it a typing error? You wrote "tax code V1 / jur. code NZ001" is missing but "tax code V1 / jur. code NZ0001" is working well (which has one more "0"), so please check this.
    Best regards, Christian

  • Loan Error : Tax code .. does not exist for jurisdiction code

    Dear experts,
    Please help me for below issue.
    I have created a loan (using FN1V) in loan management.  in this loan i have maintained and interest condition. in this interest condition i have maintained tax code - IV. After that when i try to post an interest entry using t.code - FN8D, It is showing me an error as below.
    Tax code IV does not exist for jurisdiction code
        Message no. FF718
    Diagnosis
        You have entered tax codes and jurisdiction codes in the G/L account
        items. The amounts of these items are used as the tax base to check the
        tax amounts you have entered or to determine the taxes. The system has
        now determined that one or more of the "tax code / jurisdiction code"
        combinations do not exist in Customizing.
    System Response
        Calculation of the taxes or checking of the taxes entered had to be
        terminated.Procedure
        Check the tax codes and the jurisdiction codes in the G/L account items
        or asset items. If these are correct, inform your system administrator.
    Procedure for System Administration
        Change the tax jurisdictions you specified in Customizing under
        Financial Accounting -> Financial Accounting Global settings -> Tax on
        Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions.
        To do this, choose Maintain entries (F5).
    Please help
    Regards
    Gaurav Gupta

    HI Gaurav,
    so what do you have in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions ?
    BR, Tomislav

  • Tax code optional in document type for one company code

    Hello experts,
    Is it possible to make tax code optional in a document type only for one company code.  If yes kindly explain me the process in detail. 
    Regards,
    P.Krishna Chaitanya.

    Hi
    If I understand your requirement correctly  that for a particular document type, the line item should not contain a tax code, while for other Document Types, it should have a tax code. Note, the logic for making tax code optional/mandatory is made through the field tax category in the GL Master and not through the field status. further Build in a validation rule, using a logic as follow:
    BKPF-BLART IN "SET NAME"
    Check BSEG-MSKWZ<> ' '
    Set an Error message
    You can also create a subsitituion rule for populating tax code with a blank value if a particular doc type is used.
    BKPF-BLART in 'SET NAME"
    Substitute BSEG-MSKWZ= ' '
    You may need to allow tax code as a field to be substituted in the maintainence view of table GB01 using T Code SM30 for boolean class 9
    Regards
    Sanil

  • Step by Step configuration for Shipment cost Calculation

    Hi Gurus,
    Does anybody have the step by step configuration guide for Shipping, Transportation & Shipment Cost Calculation. I am new to this functionality. My email id [email protected]
    Thanks in advance
    Regards
    Mahendra

    Hi MAhendra,
    Create Delivery:
    T.code: Vl01n
    Create TO:
    T.code: LT03
    Create  Shipment Document
    Use
    After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
    Logistics &#61614; Logistic Execution &#61664; Transportation&#61664; Transportation Planning &#61664; Create &#61664; Single document
    T.code: VT01n
    Enter your transportation planning point and shipment type. Press enter.
    Creating the shipment cost document
    Use
    After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
    Logistics &#61614; Logistic Execution &#61664; Transportation&#61664; Shipment cost &#61664; Create &#61664; Single document
    T.code: VI01.
    After creation of shipment cost doc. You settle the Shipment cost.
    Go to VI02, enter shipment cost no.and press enter.
    Then go to Overview -- Fright cost items, Select hte line item and double click it.
    Go as main menu: Itme --> Acc. assignment, You enter G/L acc. and cost center to which the transportation cost will be posted.
    On the Standard change, details – Freight cost items screen, then check the check box “Transfer”, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the “Transfer” check box.
    Press save button on the current screen.
    Shipment cost settlement and documents:
    Use
    After the shipment cost settled in shipment cost document, it has the following affects:
    It creates a service entry sheet that refers to the purchase order determined.
    It posts acceptance of services performed.
    It creates an accounting document for the accruals.
    Further subsequent documents are created in FI.
    Reward points if it helpful
    Regards
    Govind.

  • Issue in creating Invoice when route is not relevant for shipment cost.

    Dear All,
    We are facing a problem while creating an Invoice. The route used in shipment in not relevant for shipment costing. Shipment type is relevant for costing. So in normal scenario if I don't remove the tick mark from "Shipment cost relanace" at shipment type and proceed with Invoicing I get error as " SHipment costing is not complete", which is correct. The scenario works well if item/s in delivery are not batch split.
    But, if items in delivery are batch split and "shipment cost relevance" check is not removed from shipment type then, only batch split items get copied in invoice. Header item is deleted and invoice gets saved, which should not happen.I don't get error in this scenario.
    How should I make the error in invocie work in case of batch split items also? Could anyone please let me know?
    Thanks!

    Dear Manmeet Mohan K,
    Can you please check the copy controls in between delivery document to invoice(VTFL)
    Thanks&Regards
    Raghu.k

  • Service Entry sheet Creation for Shipment cost Document

    Dear All,
    While creating a shipment cost document .A service PO is getting generated in the back ground based on which a service entry sheet is created and LIV is made.But in the configuration we are mapping the Transportation planning point to Purchase organisation alone.
    Can some one let me know whether the generation of PO in the back ground for a shipment cost document in the back ground is a standard SAP feature if so can you tell me the configuration steps.
    Regards,
    K.Vivek

    Hi,
    Creation of Service PO in shipment cost document is based on the following SPRO setting or T-code.
    T code : T_56.
    SPRO > LE > Transportation > shipment cost Document > Shipment cost types and item categoires.
    Get into the details of item categoires, you can see the indicator Generate PO.
    hope this helps.
    Harish

  • Required BAPI for Shipment Cost Document (VI01)

    Dear All,
       I required BAPI for Shipment Cost Document (VI01), pls help on this.
    Regards
    Ranjit

    Dear MM
      Thanx for replying, but the BAPI which you have provided will only show me the Cost with correct Tax calculation,
    But its not getting created, which system should show the Shipment Cost Document number.
    Regards
    Ranjit

Maybe you are looking for