Tax error: Precedence Level: This Precedence level is already in use.

Customer applied Vertex integration with Oracle Etax ,while update tax juristiction information and apply ,the error is out like below:
Precedence Level: This Precedence level is already in use.
You must create unique precedence levels for tax jurisdictions that apply to the same tax.
Customer wonder precedence level logic .
Is any one know about precedence level?
Thanks,

This is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful. Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer.

Similar Messages

HT2589 Getting an error when updating my iphone user id already in use

I recently got my iphone and after I updated the new IOS6 version , I keep getting an error message.
This Apple ID is already in use and it asks me to reset my password which I have done a couple of times.
Any idea how I can fix this ?

Hi ...
Try here > Associating and verifying email addresses with your Apple ID

I bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

i bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

The message is correct. You can only register a product once... there is no need to register again after you do it the first time. You can re-install and activate with the serial number, but there is no need to re-register.

This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

My current Apple ID, for which all of my content has been downoaded (e.g., music, apps) is associated with a work email address that I will no longer have access to in the near future. In my Apple ID account, I noticed I had two alternate emails listed, one is my .me account and the other is my .gmail account. I use my .gmail account, and it is the primary email I use with friends and family. I noticed both were not verified, and when I tried to, it said they were both associated with other accounts. I was able to log into a separate Apple ID account I must have set up at tone point with my .gmail, and I changed the email address to a new one I created. I also deleted the gmail account from any other Apple-relted account I could think of. I am still gettgin the same error message when I try to add it to my current Apple ID: "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
My concern is this: with FaceTime and now iMessage, it seems more important than ever that I am able to use my correct email address. With iOS5 beta, I cannot enter either my .gmail or.me accounts under "You can be reached for messages at:" as I get an error stating: Unable to verify email because it is already in use."
How can I remedy this issue and assign my .gmail account to my Apple ID?

Re: Cant verify Apple ID
created by kelly218 in iTunes Store - View the full discussion
I just spoke with a technician at Apple. I hsven't been able to verify because the wife has the phone. but he said all that you need to do is:
1) Go to Settings --> iTunes Store and login with your Apple ID and pwd
2) Go to Settings --> iCloud and login with your Apple ID and pwd
seems that the phone requires you to login to the store first...

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead!

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead! Even my device is not jailbroken.
iTunes recognize this device and giving option for Restore. i go for it and in the continue process WAITING FOR iPHONE /// at this stage it stuck.. and keep serching like for something and in the iPhone APPLE LOGO and Status bar showing..but not processing further.

Shaishel,
Did you resolve this? I am having the same problem! Let me know if you have any suggestions.
Thanks

Time Machine error message: The backup disk image is already in use.

Hi,
Everytime my Time Machine tries to perform a backup I get the following error message: The backup disk image “/Volumes/Data/Celine Gauld’s iMac.sparsebundle” is already in use.
I'm not very tech-savvy and certainly don't know my way around the Mac that well. Any suggestions as to how I go about solving this?
Thanks.

Welcome to Apple Support Communities
Restart your iMac and Time Capsule. In most of cases, this should solve the problem. If it doesn't work > http://pondini.org/TM/C12.html

HT1918 This email address is already in use as an apple id

My Apple ID where I have all of my past purchases, is an old email address that will soon be gone. I know how to change it at "appleid.apple.com" but what I would prefer to do is to use my newer iCloud email address (where I own really nothing)
When I try to make this change at "appleid.apple.com" the system will not let me because that email is already 'in use' as an Apple ID.
Does anyone know how to make this work? I would really rather not create some new gmail account.

Try here:
iOS: FaceTime is 'Unable to verify email because it is in use'
FT, GameCenter and Messages are the same in this regard)

This user id is already in use

When i try to enter my blackberry id in my new z10, I get this message
request failed
this username is already in use
enter a different username
The username is mine, I can login in blackberry.com and see my details.

It sounds like you're trying to create a new BBID rather than login with an existing BBID.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

"This email address is already in use" for apple ID. I don't have another account. How can I change it?

I have read through other responses - from back in November... Tried everything. Must have at one point tried to use new email for apple id - but it won't let me do it now. Frustrating!,,

appleid.apple.com
You can track down past appleID's there and also do edits and password resets.

IMessage returns error message when verifying - says it's already in use but can't use it...

It verified another Apple ID I use for iTunes and an AOL address (but not sure they're working).
In addition, i cant seem to register my iPhone number...is there an option for that? If so how do I do it?
TIA and sincerely,
Susie

That usually means it's associated with another ID or used somewhere else.
The following article(s) may help you.
Look up your old and forgotten Apple ID

HT1414 I restored My Ipad but it asks for me to enter an email address when I do message says "Try another ID this apple Id is already being used...."

I restored my Ipad but it asks me to enter an email addtress. When I do it says Email Address is already in use

Thank you...I had selected the incorrect option to create an Apple ID....so backing up a few pages and doing as you stated worked!

ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone

Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!

Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore

ORA-00604: error occurred at recursive SQL level 1

Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
raja

I had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS.

ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)

I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RP

Seems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
   ORA-01000: "maximum open cursors exceeded"
        Cause: A host language program attempted to open too many cursors.
               The initialization parameter OPEN_CURSORS determines the
               maximum number of cursors per user.
       Action: Modify the program to use fewer cursors. If this error occurs
               often, shut down Oracle, increase the value of OPEN_CURSORS,
               and then restart Oracle.

Tax error: Precedence Level: This Precedence level is already in use.

Similar Messages

Maybe you are looking for