Tax model, Tax combinations and Tax types for New Jersey

We are having problems in computing taxes correctly for Employees who have their Work tax area and Residence tax area as New Jersey.
Can anyone please help with the best Tax model, tax combination and Tax types for these combination for New Jersey.
It will be better if you have employees in New Jersey, who have their Taxes deducted correctly.
We are in an implementation and unfortunately it has been a while since we have applied any Tax related SAP notes or BSI tubs.
Appreciate all help.

i have been researching and have found that NJ state taxes are like Puerto Rico taxes. The Schema UMOT may have to be used with a different modifier to calculate Withhoding tax for NJ , different from FED.
Has anyone of you used this schema ? I find that UTAXRAUTHY ( tax authority) is an Operation in the deecisison tree .Can anyone confirm if Tax type is also an operation?
I shall appreciate any related feedback.Thanks.

Similar Messages

  • Item Category and MRP type for material is not allowed

    Hello all,
    I got a Error Message:
    <b>Transaction Z113 is not defined (Message no. V1347)</b>
    <b>Diagnosis</b>
    This combination of item category Z113 and MRP type for material is not allowed.
    <b>System response</b>
    The system does not allow further processing of this item.
    <b>Procedure</b>
    Check your entry.
    You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
    <b>The SD Configuration seems all right, I have:</b>
    Sls Doc Type (<b>VOV8</b>) – ZA9 (no delivery type assigned)
    Item Category (<b>VOV7</b>) – Z113
    Assigs Sls Doc & Item Ctgry (<b>VOV4</b>) – ZA9/ZNOR/blank/blanl/Z113
    ZNOR = Std Item-Av. chck  Del
    ZNOR defined in MM03/Sls Org 2
    Define Schedule Line (<b>VOV6</b>) = Z7 (without delivery)
    Z7 has FLAG on Prod Allocation
    Assign Schedule Line (<b>VOV5</b>) = Z113/ND/Z7
    At table: TVEPZ
    I have the entry: Z113/ND/Z7
    Guys, what would?
    Please help me out because I am stuck in this issue.
    Thanks a lot,
    Barbara

    Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
    Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
    New Rqmts class gets tied to a Rqmts Type
    New Rqmts Type gets assigned to rqmts class
    Strategy, assign the Rqmts Type to it
    Strategy Group, Assign the Strategy  to it
    MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
    It may be something in this area that you need to trace through ?
    Bill

  • Passing the file name and file type for mime_download

    HI All,
    Can You Please let me know how to pass the parameters file name and file type for mime_download.
    Thanks in Advance.
    Regards,
    Haritha.

    Hello Haritha,
    Please see the SAP help:
    http://help.sap.com/saphelp_nw70/helpdata/en/46/9bd97240b81e5be10000000a1553f6/frameset.htm
    Edgar

  • Item category (Customized )ZJT1 and MRP type for material is not allowed

    Hi Guys,
                   When i try to create the order i see the error as item category and MRP type of the material is not allowed.
    I checked in Vov5 table, i could observe that Schedule line category is maintained.
    Could you please help us in resolving this..
    Thanks and regards,
    Rahul

    Hi,
    Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
    Hope this resolve your issue
    Regards,
    KrishnaO

  • T-SQL and CLR types for return value do not match

    Hi I am trying to create a CLR function to call a webservice, the CLR function return data type is double, whether I try
    to create this as a table valued funcion or a scalar to return a distance travelled value I am receiving the error below. I've tried changing data types around in the CLR side and the SQL side but keep receiving the same error message, any help would be appreciated,
    Thank you,
    [Microsoft.SqlServer.Server.SqlFunction(Name = "DistanceCalc")]
    public static Double DistanceCalc(Double SrcLat, Double SrcLong,
    Double DestLat, Double DestLong)
    MileageWS ws = new MileageWS();
    ws.Url = "http://test.isp.ca/Distance.asmx";
    int intUom = 0; // 0 = Mile, 1 = KM
    RouteType RouteMethod = RouteType.Practical;
    Requester RequestedFrom = Requester.LinkRoute;
    Double distance;
    distance = ws.GetDistanceInfoForLonLat(SrcLat, SrcLong, DestLat, DestLong, intUom, RouteMethod, RequestedFrom);
    return distance;
    CREATE FUNCTION DistanceCalc
    @SrcLat as float, @SrcLong as float,
    @DestLat as float, @DestLong as float
    RETURNS TABLE (Distance float)
    External NAME CLRfunctions.RIFunctions.DistanceCalc
    GO
    Error received when try to Create function ...
    1, Level 16, State 2, Procedure pcMiler, Line 6
    CREATE FUNCTION for "pcMiler" failed because T-SQL and CLR types for return value do not match.

    You defined at table-valued CLR function, but I think you meant to define a scalar CLR function. That might be the cause of the error.
    RETURNS TABLE (Distance float)
    should be
    RETURNS (Distance float)

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • Maintenance activity type  and order type  for plant maintenance order

    How can i get the maintenance activity type  and order type  for a given plant maintenance order. Please let me know the table where i can get these two fields
    In AFIH i can only get the MAT for an order number

    Maintenance activity type -
    AFIH - ILART
    Order Category Indicator Plant Maintenance -
    AFIH - AKKNZ
    reward if heplful

  • I want the message types and basic types for catsdb table

    i want the message types and basic types for catsdb table

    Hi Jagrut,
    Message Class is "LR".
    <b>Reward points, if helpful.</b>
    Regards,
    Atin

  • Switch Sign For Flow and Switch Type for Flow

    Hi Can any one Please make me clear at least with 3 examples how to understand Switch Sign for Flow and Switch Type for Flow
    and also the good example with Balance Recurring Account Types

    Hi Chennai,
    Consider an account "Fixed-Assets" supported by movement analysis in Custom1, as follows:
    ClosingBalance
    OpeningBalance
    Additions
    Disposals
    If you mark the Custom1 member Disposals as SwitchSignForFlow, you will enter positive values in Disposals but HFM will subtract from the other two members to calculate the Closing Balance. You may use this functionality if your client prefers to see all values as positive on the reports.
    Using the same example, you might recognize that while Closing and Opening balances are of balance type (they provide a snapshot of the account at a specific instant meaning that you see the same number whether you view the YTD or Periodic values of the account), Additions and Disposals are movements, which means that they accumulate during the same year starting from a zero balance on 1/1/201X and therefore you will see different numbers depending on viewing the YTD or Periodic values of the account. In order to provide with this behavior you have to mark both Additions and Disposals with SwitchTypeForFlow. If you don't they will behave as the underlying account (the Fixed-Assets account) and like the other two Custom1 members, Opening and Closing balance members.
    As for the BalanceReccuring, an account of this type behaves like a normal Balance account, but once you input a number in an intermediate period (say June), the same number will be copied to all following periods (July-December) until you override the numbers by explicitly inputting new values. With a normal balance account, all following periods will be empty.
    --Kostas                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to know the printprogram and output type for perticular standard script

    how to know the print program and output type for perticular standard script and wt the proceure we will fallow to modifie the standard script..if possible u have any sample code plz share with me.....

    Hi Phani,
    To know the print program and output type for a standard script we have a table called TNAPR. So just you go to SE11 and provide the table name as TNAPR and choose display option.Then go with display entries option and in selection screen you have to provide the form name for whic you want to know the print program and output type.
    To modify a standard script first of all you have to copy the standard form for which you need modifications into Zform. Once you done this you can modify the layout set as per your requirement.Then what ever the modifications you have done in layout set for that you need to populate the data.For this you also need to do some modifications to the print program.so you have to options like directly you can modify the print program as per your requirement and other one is you can create a subroutine and do coding in that subroutine. Then you need call this subroutine in the Script Form.like this you can do modifications to the standard script........................... Reward me if its helpful..........
    Thanks & Regards.
    Laxman.P
    B'lore.

  • Idoc type and message type for Planned Independent Requirement (PIR)

    Hi
    Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
    And also the prerequisites to use them.
    Regards,
    Lohitha
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on May 23, 2011 10:45 AM

    Hi,
    You can use IDoc type WMMBID02 with message type WMMBXY.
    Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
    Regards,
    Ferry Lianto

  • Idoc type and message type for inventory

    Hi All
    What is the idoc type and message type for inventory adjustments? Thanks for any help
    Thanks
    Ricky

    Hi,
    You can use IDoc type WMMBID02 with message type WMMBXY.
    Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
    Regards,
    Ferry Lianto

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • Default File Type for New Forms - How to change?

    Hi,
    How can I change propperty: Default File Type for New Forms?
    It is enabled! Do I have to be Administrator to change it? I have SAP ALL..
    SFP -> Layout -> Tools --> Options -> Document Handling
    tnx, Adibo.

    There is no authorisation required for changing the file type. You are saying its enabled, then you can change it.
    Edited by: Nikhil Poojari on Aug 28, 2009 6:50 AM

  • When replacing an accidentally damaged idevice can you opt to replace it with a different model, ie broken 4th gen ipad for new iPad mini?

    When replacing an accidentally damaged idevice can you opt to replace it with a different model, ie broken 4th gen ipad for new iPad mini?

    No. the replacement is always the same as the item being replaced.

Maybe you are looking for