Taxcodes are not appearing in dropdown list PO & MIRO

I have created new Taxcode but this taxcode does not appear in dropdown list at item details tab of PO creation screen. when enter manually taxcode system accepts but its not showing in dropdown list. similar is case when i check MIRO ..new created Taxcode is not appearing there. Could you please help me out to find solution

Hi,
In T-code OBZT select the transaction as "Relevant for all transaction against your tax code" then check the same in PO and Miro it will appear in the drop down list.
Regards,
Patil

Similar Messages

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

Pricing ZCondition Types are not appearing in Condition Record Maintanence

Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" 　our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik J

Hi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ

Tax codes are not appearing in FB70 drop down list.

Hi all,
I have created some new taxcodes and assigned them with company code.
Now these tax codes are not appearing in FB70 down list.
Can anyone suggest the solution for this?
Thanks & regards,
Rupam.

HI,
To appear the TAX codes in FB70 dropdown list you need to assign those new tax codes in the below configuration.
Spro -> financial accounting -> Accounts Receivable and Accounts Payable ->Business Transactions-> Outgoing Invoices/Credit Memos->Outgoing Invoices/Credit Memos - Enjoy ->Define Tax Code per Transaction
in that selct your country and in the next screen select new entries button and add those new tax codes. when adding chose the option FIAR FInancial accounting out going invoices. and save the entries.
after this setting you can able to see those new tax codes in FB70 dropdown list.
hope this helpful.
Regards,
Sandhya.

Tracks on compilations are not appearing on an artist's song list. Is there a setting which will change this?

Tracks from compilations are not appearing on an atist's song list. Is there a setting I can chnge to make them appear?

On the iPod turn off Settings > Main Menu > Compilations & Settings > Music Menu > Compilations.
See Grouping tracks into albums for further details.
tt2

Names from my contact list are not appearing when someone phones, when a receive a phone call

Names from my contact list are not appearing on the screen, when I receive a call

I'm not a Verizon user (I'm with Rogers, in Canada), so this obviously is not a Verizon issue. Would love to know why one second all my texts and calls had names associated with them, and then suddenly all the names were replaced by phone numbers.

TS2755 How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.

How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.

I apologize. I didn't see that you hadn't updated to iOS 7. That's an iOS 7 option. With iOS 6, you'd need to restore the device as new. Note that that will result in your phone being updated to iOS 7.
Best of luck.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Dependents from IT0021 are not appearing in IT0167 for Benefits Plans

Hi All,
Our client upgraded developement and QA client from 4.6 to 6.0 version. While assigning benefieries to the benefits plans in Dependents tab(IT0167) list of dependents are not appearing. Where in in Production system dependents are appearing, production is still in 4.6 version.
Regards,
Karunakar

Dear,
It is always required to read the dependent data as on the start date of IT0167. This is because for each plan, there is some dependent eligibility associated and to calculate eligibility, the data come from infotype 0021.
I would advice you to go through the note 947172. By implementing this note, you will be able to allow employee to edit the existing dependent record instead of delimiting and creating a new dependent record.
Best Regards,
Deepak..

TOC links are not appearing in RoboHelp 9

Hi team,
I am facing a big trouble.
I am creating an online help using RoboHelp 9. The help has 133 topics. My problem is that after generating the help, few topics are not appearing in TOC. A blank page appears. If i relink the topic, it comes fine but at the same time some other links starts not appearing in the TOC. Please help.
Regards,
Garima

Hi there
In addition to what Colum is asking, I'm going to ask/suggest this. If indeed the Topic Pane simply appears blank, try right-clicking the pane and see if you can choose "View Source". If a window or application appears that lists the HTML code, it means the topic indeed loaded but is probably having issues presenting the content. And if that's the case it's an entirely different can of worms from a troubleshooting perspective.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

CDs loaded, Artist name does not appear in ARTISTS list

Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
CDs on my video iPod. However, Carly Simon's name does not appear in my
list of ARTISTS in the Music Menu.
I did a sync with my iTunes list and the songs are indeed loaded.
Why is her name missing from the list and how do I get it back?
It used to be there!
Thanks-

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Enhancement view does not appear in my list of views

Hi ,
I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
Please help!
Regards
Shilpi

Check whether you are in Enhanced Version of UI Component ! (Original UI CMP name and Enhanceset : Z*)
Thanks
Allot points if this helps !

Album artwork does not appear in album list or grid

I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
What am I doing wrong? Artwork files were scanned from album covers that I have.

Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
tt2

In Apple mail, the attachment symbol does not appear in the list of sent items

In Apple mail, the attachment symbol does not appear in the list of sent items. So you cannot sort sent emails based on whether or not they have an attachment. Is there a way to fix this?

I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Taxcodes are not appearing in dropdown list PO & MIRO

Similar Messages

Maybe you are looking for