Tbb1 - changing profit center in FI document account

Dear all,
i need to change the profit center and the movement type when i create the document account with transaction TBB1.
movement type: I CHANGED THE METHOD  ACCIT_RMVCT_EXIT IN INTERFACE IF_EX_TPM_ACCIF_TRAC And it is ok.
prctr : I created a new method in interface class but for changing interface i need a development key; is there something that i can do to change prctr or i need to change standard sap ?
thanks a lot
Elena

Hi Elena,
Probably the class is doing its job OK but FI is not accepting the document because some field is missing. In most  SAP implementations I have seen, the profit center is not informed directly. Instead, you inform the cost center and the system determines the profit center automatically. Can you check if the cost center field is filled in the ACCIT structure when itu2019s sent to FI? Iu2019m thinking some information needed by the CO module in order to post to a profit center is missing.
Regards,
Daniel
Edited by: dmfdmf77 on Mar 30, 2011 12:43 PM

Similar Messages

  • How change profit center after FI document is posted

    Hello,
    is there a way to change the profit center after the FI document is posted?
    I have posted an vendor invoice and the profit center is wrong on general ledger and special ledger.
    Can I update the profit center after the posting?
    Thanks a lot,
    Cheers, Emanuela

    Hi
    If you are using EC-PCA, You can simply use 9KE0 to make the adjustment posting
    IF you are using New GL PCA - You need to reverse the posting and make a new one
    Regards
    SAPFICO
    Edited by: SAPFICO on Nov 29, 2010 6:14 PM

  • Change profit center for accounting document on item line

    HI
    I need to change profit center for accounting document on item line, for that purpose I have used user-exit EXIT_SAPLV60B_004, but my new profit center gets latly overwritten in FM CO_DOCUMENT_CHECK (which is called from FM AC_DOCUMENT_CREATE). It gets overwritten from COBL. Is there any way to solve this?

    HI,
    possible reasons are :
    In GR document profit center pulled from PO Material :
    If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
    If you have ordered without material code, than check cost center assigned Profit center by 1KE4

  • Change Profit Center in FI/CO document for Network or WBs

    The client does not want to change the profit center assignment on the network or WBS.
    Finance would like the ability to change the profit center when the FI/CO document is created.
    When trying a FI or CO substitution , we keep getting an error message stating that the profit center cannot be changed on the object.
    The account assignment from the object will overrride any attempt to change the profit center via substitution.
    Does anyone know a solution to the problem.
    We are investigating adding an enhancement when the error message is called. 
    Thank you,
    Jeffrey

    But, have you maintained 3KEI settings for derivation. This would give you additional flexibility to define your default account assignments. If still 3KEI is not sufficient, you can try amending the following message KI399 in OBA5. Before, making changes, you should know the implication. My question is what is the business need to change the Profit Center. Why cannot the users enter the correct WBS Element / Order, which contains the correct profit center?
    =================================================
    Following is the help.
    Message no. KI339
    Diagnosis
    You entered profit center FD999 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived profit center DUMMY from the account assignments.
    System Response
    The system automatically determines the profit center from the assigned profitability segment, cost center, order, project, network, sales order, or cost objects. This overrides the profit center you entered manually.
    Procedure
    To post the data to profit center FD999, assign the profitability segment, cost center or other object to that profit center as well.
    If the posting to profit center DUMMY is correct, no further action is necessary.
    This message is sent as an error in the standard system. You can make the message a warning or deactivate it entirely in Customizing. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 339.

  • Change profit center document

    < MODERATOR:  Message locked.  Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
    Hi,
    Can we change the details in profit center document(fields like text field) not the values? if so let me know the T.Code.
    Thanks in advance
    Prasad

    But, have you maintained 3KEI settings for derivation. This would give you additional flexibility to define your default account assignments. If still 3KEI is not sufficient, you can try amending the following message KI399 in OBA5. Before, making changes, you should know the implication. My question is what is the business need to change the Profit Center. Why cannot the users enter the correct WBS Element / Order, which contains the correct profit center?
    =================================================
    Following is the help.
    Message no. KI339
    Diagnosis
    You entered profit center FD999 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived profit center DUMMY from the account assignments.
    System Response
    The system automatically determines the profit center from the assigned profitability segment, cost center, order, project, network, sales order, or cost objects. This overrides the profit center you entered manually.
    Procedure
    To post the data to profit center FD999, assign the profitability segment, cost center or other object to that profit center as well.
    If the posting to profit center DUMMY is correct, no further action is necessary.
    This message is sent as an error in the standard system. You can make the message a warning or deactivate it entirely in Customizing. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 339.

  • Change in Profit center of Material Document

    Dear SAP
    I have made a outbond delivery with movement 601 and corresponding material document is being created with accounting entries. but here profit center got wrong and when I am changing profit center through SAP Edit (Changed in MSEG,LIKP,BSEG).
    But the the MIGO Display and MB5B report are showing the earlier profit center.
    How and where we can change the profit center so that it gets corrected

    Hello
    As per standards, you can't change account assignment for a document after you have posted the material document. It is advised to reverse the material document and then do the neccessary corrections in the preceeding documents and then post the material document again. So, even though you have changed same may not help.
    If you still want further information, consult FICO consultant on this.
    Thanks & Regards
    JP

  • Default of Profit Center in the Documents on the Basis of GL Accounts

    Hoe to default the profit center in the Documents on the basis of the GL Accounts.

    In 3KEH set up a default profit center for a particular account. If a company break down is needed, set up the account first to dummy. Then select Prctdet. There you assign the GL account to the profit center and company.
    pls assign points if helpful as a way to say thanks.

  • Wrong Profit Center on Material document (Goods Receipt PO for Asset)

    Dear SAP Expert,
    When our company upgrade our SAP version from 4.6C to ECC6, all Profit Center on Material document (Goods Receipt on Purchase Order for Asset) is filled by profit center DUMMY.
    This condition not happend in our previous version (4.6C). Is there any new configuration on ECC6 for Asset Accounting?
    Many Thanks
    Maickel P

    Hi, Maickel:
    There is a setting for Dummy Profit Center, you can check in SPRO: Controlling->Profit Center Accounting->Master Data->Create Dummy Profit Center.
    And you can refer to the help of this IMG activity:
    Create Dummy Profit Center
    This function lets you create the dummy profit center for the current controlling area.
    The dummy profit center is updated in data transfers whenever the object to which the data was originally posted (cost center, order, and so on) is not assigned to a profit center. This ensures that the data in Profit Center Accounting is complete. You can later send the data on the dummy profit center to the other profit centers using assessment or distribution.
    You create the master record for the dummy profit center using this special transaction. To change or display it, use the normal profit center maintenance functions.
    The name of the dummy profit center is displayed in the controlling area settings for Profit Center Accounting.
    Prerequisites
    The standard hierarchy must exist for the current controlling area.
    Actions
    Enter the name of the dummy profit center. The rest of the steps are the same as when you create a normal profit center.
    Choose the function Extras -> Set controlling area first to make sure that the correct controlling area is set.
    Notes on transporting
    You can transport the Customizing settings for Profit Center Accounting under Transport Connection.

  • Substitution of a profit center at FI document posting

    Dear experts,
    I have created a cost center in which master data no profit center has been indicated. This because I have set up a substitution that, with a user exit check a custom table, retrieves the correct profit center to be used in the posting and populate it in the "Profit Center" field.
    The problem is that the system is then changing the content of the field profit center with the dummy profit center (since no link between profit center and cost center is indicate ad cost center master data), which is not correct.
    Do you know how can I overcome or avoid this automatic substitution that the system is making?
    If I include a profit center in the cost center master data the system is anyway changing the one included in the document by the substitution with the one included in the cost center master.
    Thanks in advance for the help.
    Regards

    Hi again,
    actually OSS note 62417  and 102737 seem to indicate that the  behaviour you observe is intended by SAP:
    We must have done something to our system to change this behaviour and make substitution work. I will try to find out what this might be.
    62417
    Symptom
    In accounting, posting is carried out to a dummy profit center, although the triggering billing document contains an explicit profit center.
    The dummy profit center is set in a line item after a profit center has been explicitly entered first.
    Additional key words
    VF01, FB01, profit center, CO interface
    Cause and prerequisites
    In addition to the profit center, the line item contains further CO account assignment objects, for example, cost center, order or profitability segment. Among the account assignments entered in addition to the profit center there is an actual CO account assignment object, for example, an actual order. In this case, the system requires that you always post to the profit center of this order. If no profit center is assigned to the order, posting is done to the dummy profit center.
    Under such circumstances, the system cannot post to the explicitly assigned profit center, since in the case of a later CO-internal allocation of the order to another order, the profit center assigned to the other order will always be credited. However, debit and credit must occur on the same profit center so that profit center accounting stays consistent.
    Solution
    The effect is authorized:
    Under such circumstances, the system cannot post to the explicitly assigned profit center, since in the case of a later CO-internal allocation of the order to another order, the profit center assigned to the other order will always be credited. However, debit and credit must occur on the same profit center so that profit center accounting stays consistent.
    OSS 102737:
    Symptom
    You want to reset the Profit Center in the document using a substitution (OKC9).Although the substitution is defined correctly, another profit center is written in the document afterwards.
    Other terms
    CO interface, profit center, G_VSR_SUBSTITUTION_CALL, KI339, KI 339
    Reason and Prerequisites
    In the line item, a posting is carried out to a controlling object which is assigned to a Profit Center.However, the substitution places another Profit Center into the line item.
    Solution
    The Profit Center of the line item and that of the controlling object posted to the line item must be identical.A substitution under these conditions is ineffective.
    Header Data
    Release Status: Released for Customer
    Released on: 10.01.2002  16:10:40
    Master Language: German
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: CO-OM-CEL-E Postings
    Secondary Components: EC-PCA Profit Center Accounting
    FI-SL-VSR Validation, Substitution and Rules
    Affected Releases
    Release-Independent

  • How to change Profit Center

    Dear PS Gurus,
    Kindly help me out on this.
    My Query:-
    I am trying to create a PO using the T-code ME58. When i am selecting the PR and adopting it i get a message as "Profit Center was set to 9999". However i want to post the data to profit center 1300.To do so the system is asking me to to assign the PSG, cost center or other object to that profit center as well.
    Diagnosis by the System
    You entered profit center 1300 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived the profit center 9999 from the account assignments.
    Kindluy suggest as to where i should go and change the profit center so that i dont get the error message while creating the PO.
    Points will be rewarded.
    Regards,
    Gokul

    Dear NAG,
    As suggested i checked the Proift Center in t-code OKB9. I found the details as follows:
    CoCd - 1000 (IDES AG)
    Profit Center - 9000 (IDES Portugal)
    Cost Center - This field is blank
    Cost Element - 800000
    I checked the profit center in the material master also and found that the profit center 1300 is assigned, which is fine. Also i checked the profit center in my project. There too the same profit center has been assigned.
    I changed the profit center from 9000 to 1300 in t-code OKB9, and tried making the PO.But still i am getting the same error.I have checked the entire list of profit centers assigned to CoCd 1000 in t-code OKB9 but nowhere i could find the profit center 9999 assigned. I am confused as to from where the system i picking up this profit center (9999). When i checked the details of the profit center 9999 it was found that it is a Dummy profit center but i dont know where it is assigned and from where the system is picking this Profit center.
    Request you/anyone to knidly help me out in solving this issue. For your information i am trying this example in IDES.
    Please help me out.
    Thanks & BEst Regards,
    Gokul

  • Enter Profit Center in Cleared Documents.

    Dear Experts
    I need to enter profit center in posted / cleared document, is it possiable or not. please clear that.
    Thanks

    Hi Mehdi
    It is not possible to enter/change profit center in an already posted document.
    Hence you may have to rectify it by posting a Journal voucher in FB01 or directly in PCA using T.code 9KE0.
    Regards

  • How to update profit center in posted document without profit center ?

    HI,
    I want to know,
    How to update profit center in posted document without profit center ?
    So that i can get my profit center accouting report proper.
    Thanks
    Nilesh

    There is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents.  And the solutions is below:
         For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
        For B/S account,  if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
      Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
      First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
    For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
    Good Lucky!
    Flex Yang

  • Report Profit center when active document splitting

    hi all!
    i have a problem, please help me!
    i actived document splitting.
    after that i enter an entry:
    debit an customer     500
    credit revenue         240 (profit center 1)
    credit revenue        260 (profit center 2)
    after that, use TCode fb03 to display this documnent (general ledger view). i see
    debit receivable account 240 (profit center 1)
    debit receivable account 260 (profit center 2)
    credit revenue         240 (profit center 1)
    credit revenue        260 (profit center 2)
    and, when i see Profit center report (for Profit center 1), i dont see any receivable account.
    so, can you help me how to display this receivable amount in profit center report
    thank in advance.

    Hi,
    using New GL and activating "old" PCA is possible,  just do the settings in T-Code 1KEF.
    But as PCA is an integrated functionality of NewGL why do you want to post this documents again to "old" special ledger?
    Guess its more senseful to update your reporting based on the NewGL data source...
    Best regards, Christian

  • Distribution of Profit Center with JV Documents.

    The new GL Profit Center distribution cycle does not create JV Document. Requirement is to distribute Profit Center with JV Documents.
    Need to distribute Revenue booked under different profit centers based on the percentage. The combination for distribution can be Co. Code, Posting Period, Fiscal Year, G/L Account and Profit Center. Want to post documents for each line item posted. While running Profit Center distribution cycle, cycle should take the same amount which was posted while generating Sales Invoice.
    How this can be resolved.
    Thanks
    anya

    Hi,
    Instead of editing the cycles every now and then, better to have ratios by way of SKF. Pl elaborate the ratios, we can suggest how to capture it in SKF.
    Trust this helps much!
    Cheers!

  • Changing Profit Center in Partially Delevered Sales Order

    Dear Experts,
    Can anybody tell me how we can Change Profit Center in Partially Delivered Sales Order?. in Standard, System allows to change  PC in open sales Order without any subsequent documents.
    There is business requirement to change PC in all Open Sales Orders.
    br,
    vgl.

    Try this.
    Go to MASS, Key in Object Type BUS2032, select Table MASSVBAP and click on "Fields".  There select the field "MASSVBAP-PRCTR" and execute.
    Next paste those open sale orders and again execute.  There maintain the required Profit Center on top cell and click Carry out mass change.
    thanks
    G. Lakshmipathi

Maybe you are looking for