TC not able to reach more than 17ish mbps

Hello,  my ISP connection is 30mbps and the only way to reach that speed is to connect my MBP directly to the RJ45 that comes from the cable modem.  If I used wireless (tried every settings on both 2.4 and 5GHz) or wired from the TC, the connection speed never get faster than 17-18mbps!
I tried wireless directly in front of the TC and even wired and speed isnt there.  Is my TC dying slowly? or this kind of thing is on or off?
thanks

Any router will introduce some loss of speed both in the firewall and in the security that is used for wireless.
So, you need to check 3 things:
1) Connection from the modem directly to your computer.
2) Connection from one of the Ethernet LAN ports on the TC to your computer. This will normally be about 80-85% of the direct connection from the modem to the computer. What speed do you see when you test this way?
3) Wireless connection near the TC. The speed here will usually drop another 10-15% from the Ethernet connection due to wireless security and normal loss in the conversion to a wireless signal.
Wireless interference from a nearby cordless phone (it could be at the neighors), a wireless camera/security system or other wireless networks near you can slow down the wireless signal as well. There is not much that you can do about this.

Similar Messages

  • TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

    Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

    Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
    There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

  • 9.3.1- Not able to see more than 1 errors in application.log file

    Hi,
    In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
    If anybody has faced this solution, pls let me know the cause.
    Thanks
    jazz

    Hey Jazz,
    in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

  • Not able to select more than two values

    Based on picklist.fmb, I created a list item in a form.
    I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
    Anything I did mistake or picklist won't support picking more than two values using CTRL?
    Also I am not able to get the scroll bar attaching to this list item.
    Please advise.
    Thank you,
    Prasad

    hi,
    You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
    data: lv_line type i.
    DESCRIBE TABLE  gt_table LINES lv_line.
    table_control-lines = lv_line + 1.
    or else
    You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

  • Not able to update more than 10,000 records in CT04 for a characteristic

    Hi all,
    We are not able to update more than 10,000 records in CT04 for a certain characteristic.
    Is there any possible way to do this?
    Please advise...its a production issue.
    Thanks.

    Hello ,
    Please consider using a check table for the characteristic involved if you are working with large
    number of values assigned
    With a check table you have a possibility to work with a huge amount of values , also the performance should improve                          
    Please refer to the link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
    Section - Entering a Check Table 
    Hopefully the information helps
    Thanks
    Enda.

  • Not able to view more than two line in table control

    Hi all,
    I am not able to see more than two lines in table control. Although my table control height is 21...
    Please see attached pic and suggest me what to do.

    hi,
    You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
    data: lv_line type i.
    DESCRIBE TABLE  gt_table LINES lv_line.
    table_control-lines = lv_line + 1.
    or else
    You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

  • Not able to scale more than 1500 users when using apache (OHS),why ?

    Hi,
    When scale more than 1500 users, my applications response time degrades.If i use IIS as my webserver I am able to scale more than 3000 users, is there any bottleneck in the oracle apache (OHS) ?
    OHS Config
    Timeout = 300
    KeepAlive = ON
    MaxKeepAliveRequests = 100
    KeepAliveTimeout = 15
    MaxRequestsPerChild = 0
    ThreadsPerChild = 5000
    SendBufferSize = 16384
    MaxClients = 5000
    Regards
    Vino joy

    Hi Jean,
    Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 21, 2012 8:25 AM
    Edited by: user766882 on Aug 21, 2012 8:33 AM

  • Not able to save more than 2000 characters

    Databse - SQL server 2000
    I am using jdbc to save some text in sql server 2000 database. column is of type ntext.
    If text is more than 2000 character, i am getting an error.
    I tried changing the connection setting to sendstringparameterasunicode=false. After setting this property i am able to save more than 2000 characters, but i am not able to save some special characters. eg - . I am not able to save “abc” but i can save "abc". So it is not recongnizing the double quotes in the first scenario.
    Amit
    Edited by: rushtoamit on Feb 22, 2010 8:48 AM

    No idea. But it isn't a java nor jdbc (general problem.)
    Thus if you are seeing something that tells you it is too big it either comes from the driver or the database.
    So your solutions are
    1. Use a different database and driver
    2. Use a different driver
    3. Modify your code

  • Not able to edit more than one function of new photos

    I recently upgraded my iPhoto to 09 after shifting to Leopard 10.5 on my G5. Today, for the first time after the upgrade, I loaded about 100 photographs and have found that I am unable to edit more than one function at a time on these image. For example, the image contrast can be adjusted, but, following that, no other function or cropping appears to work. The saved image, after selecting "Done", doesn't show any change other than the initial edit. Surprisingly, I am able to perform multiple edits on the images that were already in the Library (8,500!). After looking at this forum's topics and trying some of the suggestions provided for other editing issues, I've tried to edit more than one function in full screen view, library and album modes with no success.
    Any help would be appreciated.
    thanks,
    Message was edited by: Umnak ( showed incorrect OS on original)

    If you go the PS or PSE route this many be of some help:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

  • Advanced table:not able to view more than 10 rows when called from workflow

    Hi everyone,
    I'm calling a page that contains advanced table and its controller class from two places.
    First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
    Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
    Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
    Please help me!!
    Thanks
    Sunny

    Thanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.

  • 6th Nano-Not able to sync more than 8gb from seleted music catagories

    Hello, I have an Ipod Nano 8GB 6th Gen.
    I would like my nano to function pretty much like my 2gb shuffle. My 2gb shuffle will randomly autofill with playlists i have created that are usually greater than 2gb by randomly picking 2gb worth of music from that playlist.
    I am having trouble syning music to my 8gb nano. I easily have more tha 8gb of music on my computer. I would like to randomly sync different playlist/genres of music that I select onto my ipod but I receive errors that there is not enough space when ever I have checked off portions of genres that exceed 8 gb of music.
    Seems like my only options to sync music is either for itunes to randomly fill my ipod with my entire music library or I have to choose genres,artist that are less than 8gb.
    Is here a way to for itunes to randomly sync music to my nano that I have selected catagories that I have choosen(genres, podcast, artist, etc) that is in excess of 8gb or can this only be done by my entire music library.
    Thank you for your help

    Hi AmishCake.
    Many thanks for your recommendations. However, I have done all the recommendations that you have suggested. In fact, Apple Support staff has forwarded my problem to their Engineering Team. Apple has recognized that it is a problem. Apple had the diagnostic files on this problem. My main issue is that Apple is NOT able to provide me a date when this sync problem can be resolved. All they say is that they are investigating. So how does one feel when the problem has been outstanding for almost two months?
    In fact, I suggested that Apple send me a replacement working Iphone 5S but they could not. It seems that they have tested this problem on their side & it is still there. So now I become very frustrated. I thought I bought a quality Iphone 5S!!!!
    All I am asking is help from this community is what options do I have to seek advice on how to make it be known to senior management of Apple that there is no urgency from the Engineering Team on problem resolution.
    It is very much appreciated if someone can provide me an email address of the person in Apple who can look into this outstanding problem as it seems it is not moving at all.
    Many thanks in advance for all the cooperation.
    Best Regards

  • Not able to create More than 1 Partition in USB Drive using kernel32 and DeviceIoControl

    I have successfully created 2 or more partitions in USB drive using DeviceIoControl in C++. Now I am trying to convert this code into C# using kernel32 and DeviceIoControl. But I am not getting more than 1 partition. Can anybody tell me what is wrong
    with this code?
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Diagnostics;
    using System.Runtime.InteropServices;
    namespace PartitionWrapper
    public class IOWrapper
    public static bool CreatePartitions(string selectedDrive)
    bool RetCode = false;
    try
    bool bSuccess = false;
    uint dwBytesReturned = 0;
    IntPtr hDisk = OpenVolume(selectedDrive);
    if (hDisk == null || hDisk == FSConstants.INVALID_HANDLE_VALUE)
    RetCode = false;
    goto FINAL;
    bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_DELETE_DRIVE_LAYOUT, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
    // Get the partition information
    uint PartitionInfomations = (uint)(Marshal.SizeOf(typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX)) + 3 * Marshal.SizeOf(typeof(FSStructures.PARTITION_INFORMATION_EX)));
    byte[] DBuffer = new byte[PartitionInfomations];
    GCHandle handle = GCHandle.Alloc(DBuffer, GCHandleType.Pinned);
    FSStructures.DRIVE_LAYOUT_INFORMATION_EX pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(handle.AddrOfPinnedObject(), typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
    IntPtr pDriveLayoutPtr = Marshal.AllocHGlobal(Marshal.SizeOf(pDriveLayout));
    Marshal.StructureToPtr(pDriveLayout, pDriveLayoutPtr, false);
    // bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_GET_DRIVE_LAYOUT_EX, default(IntPtr), default(uint), pDriveLayoutPtr, PartitionInfomations, ref dwBytesReturned);
    pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(pDriveLayoutPtr, typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
    if (bSuccess || dwBytesReturned != PartitionInfomations)
    RetCode = true;
    else { RetCode = false; goto FINAL; }
    pDriveLayout.PartitionEntry = new FSStructures.PARTITION_INFORMATION_EX[0x16];
    pDriveLayout.PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
    pDriveLayout.PartitionCount = 4;
    pDriveLayout.DriveLayoutInformatiton.Mbr.Signature = 0xA4B57300;
    pDriveLayout.PartitionEntry[0] = new FSStructures.PARTITION_INFORMATION_EX();
    pDriveLayout.PartitionEntry[0].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
    pDriveLayout.PartitionEntry[0].Mbr.BootIndicator = true;
    pDriveLayout.PartitionEntry[0].Mbr.RecognizedPartition = true;
    pDriveLayout.PartitionEntry[0].Mbr.PartitionType = 0x0B;
    pDriveLayout.PartitionEntry[0].PartitionNumber = 1;
    pDriveLayout.PartitionEntry[0].StartingOffset = 32256;
    pDriveLayout.PartitionEntry[0].PartitionLength = 3221225472;
    pDriveLayout.PartitionEntry[0].RewritePartition = true;
    pDriveLayout.PartitionEntry[0].Mbr.HiddenSectors = 32256 / 512;
    pDriveLayout.PartitionEntry[1] = new FSStructures.PARTITION_INFORMATION_EX();
    pDriveLayout.PartitionEntry[1].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
    pDriveLayout.PartitionEntry[1].Mbr.BootIndicator = false;
    pDriveLayout.PartitionEntry[1].Mbr.RecognizedPartition = true;
    pDriveLayout.PartitionEntry[1].Mbr.PartitionType = 0x0B;
    pDriveLayout.PartitionEntry[1].PartitionNumber = 2;
    pDriveLayout.PartitionEntry[1].StartingOffset = 32256 + 3221225472;
    pDriveLayout.PartitionEntry[1].PartitionLength = 2147483648; //2147483648;//3221225472;
    pDriveLayout.PartitionEntry[1].RewritePartition = true;
    pDriveLayout.PartitionEntry[1].Mbr.HiddenSectors = 32256 / 512;
    for (int i = 0; i < pDriveLayout.PartitionEntry.Length; i++)
    pDriveLayout.PartitionEntry[i].RewritePartition = true;
    try
    bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_SET_DRIVE_LAYOUT_EX, ref pDriveLayout, PartitionInfomations, default(IntPtr), default(uint), ref dwBytesReturned);
    catch (Exception ex)
    if (bSuccess)
    RetCode = true;
    else { RetCode = false; }
    bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_UPDATE_PROPERTIES, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
    if (bSuccess)
    RetCode = true;
    else { RetCode = false; }
    FINAL:
    // Close the disk handle.
    if (hDisk != null && hDisk != FSConstants.INVALID_HANDLE_VALUE)
    FSStructures.CloseHandle(hDisk);
    catch { return false; }
    return RetCode;
    private static IntPtr OpenVolume(string DeviceName)
    try
    IntPtr hDevice;
    hDevice = FSStructures.CreateFile(
    @"\\.\" + DeviceName,
    FSConstants.GENERIC_EXECUTE | FSConstants.GENERIC_READ | FSConstants.GENERIC_WRITE | FSConstants.FILE_SHARE_READ | FSConstants.FILE_SHARE_WRITE,
    FSConstants.FILE_SHARE_WRITE,
    IntPtr.Zero,
    FSConstants.OPEN_EXISTING,
    0,
    IntPtr.Zero);
    if ((int)hDevice == -1)
    throw new Exception(Marshal.GetLastWin32Error().ToString());
    return hDevice;
    catch { return FSConstants.INVALID_HANDLE_VALUE; }
    internal static class FSConstants
    public const uint FILE_SHARE_READ = 0x00000001;
    public const uint FILE_SHARE_WRITE = 0x00000002;
    public const uint OPEN_EXISTING = 3;
    public const int GENERIC_EXECUTE = 0x10000000;
    public const uint GENERIC_READ = (0x80000000);
    public const uint GENERIC_WRITE = (0x40000000);
    public static IntPtr INVALID_HANDLE_VALUE = new IntPtr(-1);
    public const uint IOCTL_DISK_GET_DRIVE_LAYOUT_EX = 0x00070050;
    public const uint IOCTL_DISK_SET_DRIVE_LAYOUT_EX = 0x7C054;
    public const int IOCTL_DISK_UPDATE_PROPERTIES = 0x70140;
    public const int IOCTL_DISK_DELETE_DRIVE_LAYOUT = 0x0007c010;
    public const int IOCTL_DISK_CREATE_DISK = 0x7C058;
    internal static class FSStructures
    [DllImport("kernel32.dll", EntryPoint = "CreateFile", SetLastError = true)]
    public static extern IntPtr CreateFile(
    string lpFileName,
    uint dwDesiredAccess,
    uint dwShareMode,
    IntPtr lpSecurityAttributes,
    uint dwCreationDisposition,
    uint dwFlagsAndAttributes,
    IntPtr hTemplateFile);
    [DllImport("kernel32.dll", SetLastError = true)]
    public static extern int CloseHandle(IntPtr hObject);
    [DllImport("kernel32.dll", SetLastError = true)]
    public static extern bool DeviceIoControl(
    IntPtr hDevice,
    uint dwIoControlCode,
    [Optional]ref DRIVE_LAYOUT_INFORMATION_EX lpInBuffer,
    uint nInBufferSize,
    [Optional] [Out] IntPtr lpOutBuffer,
    uint nOutBufferSize,
    [Optional] ref uint lpBytesReturned,
    [Optional] IntPtr lpOverlapped);
    [DllImport("kernel32.dll", SetLastError = true)]
    public static extern bool DeviceIoControl(
    IntPtr hDevice,
    uint dwIoControlCode,
    IntPtr lpInBuffer,
    uint nInBufferSize,
    [Optional] [Out] IntPtr lpOutBuffer,
    uint nOutBufferSize,
    [Optional] ref uint lpBytesReturned,
    [Optional] IntPtr lpOverlapped);
    [StructLayout(LayoutKind.Sequential)]
    public struct DRIVE_LAYOUT_INFORMATION_EX
    public PARTITION_STYLE PartitionStyle;
    public int PartitionCount;
    public DRIVE_LAYOUT_INFORMATION_UNION DriveLayoutInformatiton;
    [MarshalAs(UnmanagedType.ByValArray, ArraySubType = UnmanagedType.Struct, SizeConst = 0x16)]
    public PARTITION_INFORMATION_EX[] PartitionEntry;
    [StructLayout(LayoutKind.Sequential)]
    public struct PARTITION_INFORMATION_EX
    [MarshalAs(UnmanagedType.U4)]
    public PARTITION_STYLE PartitionStyle;
    public long StartingOffset;
    public long PartitionLength;
    public int PartitionNumber;
    public bool RewritePartition;
    public PARTITION_INFORMATION_MBR Mbr;
    public PARTITION_INFORMATION_GPT Gpt;
    [StructLayout(LayoutKind.Sequential)]
    public struct PARTITION_INFORMATION_MBR
    public byte PartitionType;
    [MarshalAs(UnmanagedType.U1)]
    public bool BootIndicator;
    [MarshalAs(UnmanagedType.U1)]
    public bool RecognizedPartition;
    public uint HiddenSectors;
    [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
    public struct PARTITION_INFORMATION_GPT
    public Guid PartitionType;
    public Guid PartitionId;
    [MarshalAs(UnmanagedType.U8)]
    public EFIPartitionAttributes Attributes;
    [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)]
    public string Name;
    [Flags]
    public enum EFIPartitionAttributes : ulong
    GPT_ATTRIBUTE_PLATFORM_REQUIRED = 0x0000000000000001,
    LegacyBIOSBootable = 0x0000000000000004,
    GPT_BASIC_DATA_ATTRIBUTE_NO_DRIVE_LETTER = 0x8000000000000000,
    GPT_BASIC_DATA_ATTRIBUTE_HIDDEN = 0x4000000000000000,
    GPT_BASIC_DATA_ATTRIBUTE_SHADOW_COPY = 0x2000000000000000,
    GPT_BASIC_DATA_ATTRIBUTE_READ_ONLY = 0x1000000000000000
    [StructLayout(LayoutKind.Explicit)]
    public struct DRIVE_LAYOUT_INFORMATION_UNION
    [FieldOffset(0)]
    public DRIVE_LAYOUT_INFORMATION_MBR Mbr;
    [FieldOffset(0)]
    public DRIVE_LAYOUT_INFORMATION_GPT Gpt;
    [StructLayout(LayoutKind.Sequential)]
    public struct DRIVE_LAYOUT_INFORMATION_GPT
    public Guid DiskId;
    public long StartingUsableOffset;
    public long UsableLength;
    public int MaxPartitionCount;
    [StructLayout(LayoutKind.Sequential)]
    public struct DRIVE_LAYOUT_INFORMATION_MBR
    public uint Signature;
    public enum PARTITION_STYLE : int
    MasterBootRecord = 0,
    GuidPartitionTable = 1,
    Raw = 2

    Hello,
    in the links below you can found many informations to help you:
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa365730(v=vs.85).aspx
    http://www.codeproject.com/Articles/696388/Recover-Data-From-Corrupted-Drives-File-Systems-FA
    http://www.functionx.com/vcsharp/fileprocessing/drives.htm
    http://forums.codeguru.com/showthread.php?548305-partitioning-USB-Falsh-drive
    http://forums.codeguru.com/showthread.php?548169-USB-Flash-drive-Partitioning

  • Not able to link more than one EO to the VO.

    Hi All,
    I have to add a new column from another table to the existing VO.
    I have followed the below steps.
    Step1: I have created a new EO for the new table
    Step2: I have created a new VO which extends the existing VO.
    Step3: While extending the new VO, i have added the new EO and old EO is also there and modified the query as per my requirement.
    Step4: I have substituted the VO and bounced.
    Step5: Through personalization, I have added a new field to the page and assigned the new column name as view instance.
    Now when i run the page, values are not going to the database for the new column.
    When i clicked on Aboutthis page, VO is substituted with the new VO, but it is attached to only one EO which is the existing one, And the new EO link is missing.
    Can you please tell me whether i missed any steps or did any mistakes while performing the above steps.
    It is urgent, please help me ...
    Thanks,
    Manjula

    I am little bit confused.
    Can you tell me whether I can have more than one EO updateable in a VO or not?
    In my case, this is simple join, there is no Outer Joins in my query.
    Yes you can an have more than one EO updateable in a VO if there is no Outer Joins in query.Can you tell me the subject of the thread or threadid. I couldn't find the thread what you are saying.
    Actually that thread, i have followed the approach Tapash, mentioned ...at that time...but somehow it didn't worked in my case, anyways, you can surely give a try.I had 3-4 EOs with all outer joins.--Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Not able to Render more than two asset type in a drop zone on page

    Hi All,
    I have created two different assets by making two different flex family.
    I need to render these two assets in a single drop zone on a page.
    Can some one tell me how is it possible to make a drop zone on page which will be able to take two different type of assets because while creating Page attribute when i select page attribute of type asset there is no option through which i can select more than two asset types.
    Thanks & regards,
    Ankur Bhatia

    Hi Rodney,
    Thanks for ur Reply.
    While creating page attribute on admin site,when we select attribute type as "asset" a dropdown list comes just below through which we can select only a single asset.
    how to use a list option here or how can we create it so that it can be used with various asset types.
    Also in avisports site there is no drop zone which can contain more than one asset of different type.
    The Drop zone contains here all the assets of same type.
    Thanks and Regards
    Ankur Bhatia

  • BAPI_PR_CHANGE (Not Able to insert more than 3 Line Items)

    Hi Friends,
    I have Issue with BAPI_PR_CHANGE.
    I could Able to insert up to 3 lines items using this BAPI but if I am Trying to Insert More Than 3 BAPI throwing Dump.
    Any Idea on this?
    Any Parameter I need to pass for more than 3 line items.
    Let me know any help on this BAPI...I am on ecc 6.0.
    Thanks,
    Yogesh Patil

    We are on ECC 6.0 and have no problems creating a PR with 100+ line items or adding multiple lines to a existing PR . Please paste the first page of the dump to help me answer your question.
    Thanks,
    Raj

Maybe you are looking for

  • Text field is missing/blank in inventroy adjustment document

    Hi all, while posting adjustement entries for physical inventory through T-code MI07 we are getting field long text i.e. BSEG-SGTXT empty. as these accounting documents are posted automatically this text field should be updated by system only. can he

  • Best method for rounded corners?

    Hi all, Can someone please share the best method for creating rounded corners similar to the menu interface in Leopard? Actually the best representation I've seen, is in the Motion 3 Tutorials - Working with 3D. The Matte Shape filter in FCP is close

  • WVC210 - Web Gui

    I was wondering if there was any way to skin the web interface. I can see/save the html source code, but I'm unsure as how to get it back onto the camera. I'd like to do this because I feel that some of the icons could be smaller. I use my phone a lo

  • Post Code : Want to determine the list of Business Partner !!!

    Hi all    I have given Post Code of BP.    I want to determine the <b>list of Business Partner</b> present in the specified <b>Post Code Location</b>.   Is their any direct way around to determine the list of Business Partner ?  or Please let me know

  • Can't fully launch beyond splash screen, corrupted database?

    I'm using a MacPro with LR v1.2, OS v10.4.10. A few days ago, I got the spinning beachball while in LR, had to Force Quit. When I tried to relaunch, I could only get the splash screen and menu. Each time I launch LR, I backup. Every other day or so I