Tcode for planned production and actual production
Hello,
I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
Thanks in advance
Hey Suman,
i have the same problem, did you find a solution?
thanks
Similar Messages
-
PS: BAPI For Planned Progress and Actual Progress
Dear All,
Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
Regards,
SohailHi,
Try using this report s_alr_87013532.
Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
Regards
Hiren K.Chitalia -
Hi Guyz,
Is there any transaction code which shows the result of Planned Production and Actual production of material?
Which table holds the planned production of material?
Thanks in advance.Check AFKO & AFRU tables
-
Planned order Vs Actual Production report
Hi Experts
We are running MRP make to stock means we maintain PIR(MD61) in system. On the basis of PIR system create planned order and we declare production against these planned orders. I need a report which show the detail of planned order and actual production declare against that planned order. Please guide.
Regards
Parkash ChandDear Parkash,
second possible soluction could be create a custom report using this standard Bapi BAPI_MATERIAL_STOCK_REQ_LIST in order to read MRP element and to summarize the elements desired (DELKZ field):
MRP Ele Ind Object
PP Planned independent requirement
FE Production order
Pa Planned order
Third possible soluction setting in customizing the writing of the MRP table MDKP for header data and MDTB for item data and create a Query on these mrp table.
Let me know if i've been useful for you.
Daniele -
In which table production order planned cost and actual cost i can see?
Dear PP Guru,s,
from which table i can see productuion order planned and actaul cost. i checked following tables AUFK, AFVC, AFVV, CAUFV, AFRU, AFKO, AFPO. but i did not found planned cost and actual cost field. is there any other way to get this data with respect production order?
Regards,
sreeDear,
Planned and actual costs of prod order from COEP, COSS, COSP S027 tables
production order shows the planned cost based on the quantity structure.
Please refer my reply in this thread for details,
Re: Actual Halb Material Cost
Regards,
R.Brahmankar -
Whats the best software for photo editing and creating product catalogues that can be saved as PDF's
Whats the best software for photo editing and creating product catalogues that can be saved as PDF's
You are asking two different questiions:
1. What's a good photo editor? Answer to that here is probably obvious.
2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program. -
I need to display planned quantity and actual quantity for Plant in quarter
Hi,
I need to display planned quantity and actual quantity for Plant in quarter AND month wise as below.
Q1 Q2 ....... M1 M2 .........................................
PLANT MATERRIAL UNIT PLTY ACTQTY PLTY ACQTY PLTY ACQTY PLTY ACQTY
P1 M1 EA 20 15 30 25 40 35 50 45
P1 M2 EA 20 15 30 25 40 35 50 45
P2 M2 EA 20 15 30 25 40 35 50 45
I will keep plant and material infoobject as row. Can you please suggest how i should design column section to display like above
Regards
Deep.Hi Deep,
Assuming you have an InfoObject for Quarter (say 0CALQUARTER) & Month (say 0CALMONTH), drag the Quarter InfoObject & Month InfoObject below in the Columns. Drag your KFs i.e. Planned Qty & Actual Qty below the Month InfoObject to form a KF structure. If you don't want Qty Unit to be displayed alongside your KFs, use NODIM() function & display Unit in the Rows.
--Priya -
Settings for co-product and by-product
Hi Gurus,
Can you please tell me what are the settings i need to maintained for co-product and by-product.
Regards
RajibHi,
For Co-Products do the following settings.
1. Select Co-Product indicator in MRP2 view for header material
as well as for co-product materials.
2. Define the co-products as BOM components.
3. Give negative quantity in the BOM for co-products
Also select co-product indicator by clicking on BOM item details
and in the Basic Data Tab.
4. To calculate the production cost of co-products give equivalence
numbers in MRP2 view by clicking Joint Production push button
or you can give the same in the settlement rule in the
Production order by clicking Header menu - Settlement rule.
5. You will get the GR qty for co-products while doing MB31, 101
for the order of the header material
For By Products
1. Donot set the co-product indicator any where.
2. Define the By-Products as BOM components and give negative qty.
Regards,
Prasad -
Co products and by products during production process
hi,
I have a production scenario where in both co products as well
by products exists during production process.
We can maintain co products by choosing the indicator in material master and in BOM but how should i maintain the by products?
And also, co products and by products produced will undergo further production process with different operations, in this scenario how I can include these operations and products in my production planning? and how the costs are calculated?
Can any one please help in this regard.
Thanks and Regards,
PavanHi
For Co-product just by choosing the indicator in material master and in BOM.
So when ever u confirm the production order co- product GR done automatically through 101 movement type.
For By-product
1) u have to enter the byproduct code in the BOM with -ve sign if ur by-product is fixed qty.
2) If ur by-product is varying qty then u have to post the by product qty through MIGO 531 movement type against the production order. -
Hello all,
What is the meaning of by-products and co-products??
Pls ans.
Thanks and Regards,
Umakanth.dear
A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product level.
Prerequisites for a co-product:
The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data.
A by-product is a product that is produced in conjunction with other products. The system does not create a separate order item for each by-product. The material valuation of a by-product is always based on the price specified by price control in the material master.
Prerequisites for a by-product:
The by-product must be listed as an item in the bill of material of the main product
The bill of material item must have a negative quantity (for example u20181 -u2019).
Do not set the indictor Co-product for by-products
Reward points if helpful
Thanks and regards
Ravikant Dewangan -
Difference between co-product and By-product
Hi,
Can anyone tell me Difference between co-product and By-product with example?
What is their impact on costing?Hi,
By-Product : By-Product is a Product Created While Making Production
1. The System Does not create a separate order item for each by-Product
2. The Material Valuation of a by-Product is always based on the price, specified by the price control in the material master
3. The by-product must be listed as an item in the bill of material of the main product .The bill of material item must have a negative quantity (for example 1 -)
4. Byproduct has only the -ve quantity in BOM component, it does not go for joint production costing.
5. Movement type 531 to post the By-Product during Confirmation.
6. Settlement of cost is done to the header of the material
Co-Product :A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product
Settings: 1.) You have to activate check box in MRP2 view for co product.
2.) For co products we also need to define the apportionate structure with equivalence number for costing purpose, this will be done in "Joint Production" details in the same view. (30:30:20:20)
Prerequisite for the main product:
1.) The indicator Co-product must be activated in the material master of the main product (MRP area)
Prerequisites for a co-product:
1.) The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
2.) On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data
Regards
Sunil Kumar -
Function Module to find Planned Costs and Actual Costs against WBS element
Dear All,
We have a requirement where we need to find out the Planned Costs and Actual Costs booked against a WBS element, in a year. The costs can be against all the plan versions or on individual plan version.
Are there any function modules to retrieve this value?
Thanks for the help.
Warm Regards,
JudithHi,
The easiest way would be to get the OBJNR for all WBS elements from PRPS and look up RPSCO and summarize for Value type (RPSCO-WRTTP) 1 for planned cost and 4 for Actual cost.
Please let me know if this helps.
jibat -
IW32 needed Plan Cost and Actual Cost table name
Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahulhi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish -
Error: Common entries are not permitted for plan queries and input queries
Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
samwhen i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted. -
Co-Product and By-Product Costing in SAP PP Scenario
Frds,
Somebody can tell me, settings/enhancement in PP for Co-Product and By-product Costing along with Header Material?
ThanxYou have posted in a wrong forum. This should have been posted in PP forum
G. Lakshmipathi
Maybe you are looking for
-
Download oracle 8.1.7 for linux
Hi! I need to install an oracle database version 8.1.7 on my linux machine for my current project. Please give an alternative to download this version of the server since it's not possible to do it from the oracle site anymore. Thanks.
-
No Source List, No Events List - no way to view stored photos
Hi, When I open iphoto, I see a gray screen and the only photos visible are the ones I downloaded in the last session. There is no tab for "events," no source list, no libraries tab, no way to access any previous events and photos. They are in there
-
How to use nvl to parameter in SRW.DO_SQL in oracle report
Hi all, I am creating view runtime where i want to pass parameter to which i need to handle NVL below is my code SRW.DO_SQL('create view '||view_name11||' as select moqv.subinventory_code subinv, moqv.inventory_item_id item_id, moqv.item_cost item_co
-
5800 - Email Notification wont go
Hi, I have updated my phone to the latest software. Since that the emai notification wont go even after reading and downloading every mail. Do somebody have a hint? Thanks. Atze
-
Where do I find the admin screen for my airport extreme?
I need to make some changes in my airport extreme to allow it to connect to my Direct TV. I can't find the Admin screen anywhere.