TCP/IP Advanced Adapter Settings

We have a host server (2012r2) set up with 4 virtual machines (2008R2 and 2012) on it. The host server has network cards that are on the HCL list. For performance tuning, do I still need to disable the Jumbo packet, Large-Send Offload, and the
IPv4 checksum offload settings? Or has 2012R2 taken care of some of the networking issues from 2012? We plan on running 5 2012r2 hosts, each with 3-4 2012r2 web servers and 1-2008r2 ActiveWebGrabber (pdf generator) server. I am curious is
we still need to tune the hosts network cards, the Team, and the virtual network cards on all of the virtual machines. Thank you.
We tried running this previously, but did not have network cards on the HCL and did not have the checksum etc settings disabled. Very slow results and it would blocked itself and take a bit of time for the packets to clear.
Theresa Greene
Theresa Greene

I've been using jumbo frames on Hyper-V almost from the beginning. They are very nice to use when performing IO over the network. Don't know why you would want to disable them.
Roger Osborne, a Microsoft support engineer, has written a great blog (http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx) about
things you should be doing. Nowhere does he mention anything about disabling large-send offload or IPv4 checksum. Since he deals with support issues day in and day out, I would take it as a fairly solid statement that this is not a recommended
solution to any problem.
.:|:.:|:. tim

Similar Messages

Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7

+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma Sishta

Hi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

Hello,
We have requirement to modify Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
permissions is a cumbersome job. Hence, I am looking for a command line options.
I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
know the command hence, please do not re-direct me to scripting forum)
Manually through GUI, I am setting following.. snaps are given below
Thanks !

You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !

Using Advanced Adapter Engine in PI 7.1 to design a ABAP proxy scenario

Hi
We are currently on XI 3.0 and have a scenario in production that is as follows
R3 --> EOIO (QOS ) --> XI ---> SQL DB A, SQL DB B, SQL DB C ( split in XI , message from R3 in EOIO sequence routed to three different sql servers ). We use this scenario to push master data change messages from R3 . Whenever we do a full push of masterial/customer master from R3, it takes a lot of time for XI to process the messages, the messages hopping from Integration server and then to J2EE server.
We are moving to PI 7.1 and want to use the AAE ( advanced adapter engine ) to avoid the integration server in the above scenario and thus cut out an additional hop and send the message from R3 directly to the AAE on PI 7.1 server
i.e R3 --> EOIO (QOS ) --> PI J2EE server(AAE ) -->SQL DB A, SQL DB B, SQL DB C .
I read in new PI 7.1 features that AAE has all features available in Integration server ( routing ,mapping ) and also XI adapter type based SOAP connectivity ( R3 --> PI http connection ) is possible using AAE.
In that case, can the above scenario in XI 3.0 be redesigned /reimplemented in PI 7.1 taking advantage of AAE and thus increasing the throughput ? Please advise with your thoughts and relevant documents on AAE on PI 7.1 with an example of implementation of the above scenario.

I read in new PI 7.1 features that AAE has all features available in Integration server ( routing ,mapping ) and also XI
adapter type based SOAP connectivity ( R3 --> PI http connection ) is possible using AAE.
If not wrong this is available for SAP PI 7.1 with Ehp1.
If you try to create SOAP channel ijn SAP PI 7.11 then in the Message Protocol then in the drop-down you see SOAP and XI3.0
Regards,
Abhishek.

How can I access Advanced Javascript Settings?

I'm aware that, in recent versions of Firefox, the ability to disable Javascript has been removed. I don't intend to re-open discussion of that particular decision. But removing that option has also removed access to the Advanced Javascript Settings menu, which was far more useful than simply disabling Javascript itself. For example, although I rarely disabled Javascript entirely (other than when debugging my own site), I routinely disabled the ability of websites to disable context menus or to move and resize pop-up windows.
Unlike disabling Javascript entirely, these are settings which provide a positive benefit for "ordinary" (non-developer) users. If, say, I want to open a link in a new tab, then the correct way to do that is to right-click on it. Sites which disable right-click degrade the user experience, and allowing a way to override that is a good thing. Whatever the justification for removing the ability to disable Javascript entirely (and I do understand it, even if I don't agree with it), I can't see any justification for removing access to these advanced settings.
So my question is, how can I re-enable access to the Advaned javascript Settings? I can't see any obvious setting for it in about:config, and simply disabling javascript entirely via that method isn't what I want to do.

The href value javascript:void(0) is a placeholder to be shown when you hover a link, so you can see that this is not a normal link.<br />
The actual action is done via an onclick handler that is tied to the button (link), so if this isn't working then this can be caused by a script that didn't run properly to add this onclick action to the button or that JavaScript is blocked on that website possibly by an extension.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Note that there is also security software that can block pop-ups and JavaScript, so check that as well.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

Load balancing Central Advance Adapter Engine

Hello All,
I am trying to get more information on load balancing Central Advance Adapter Engine for SAP PI 7.1. How do I configure and load balance Advance Central Adapter Engine to handle more volume? Should I added extra non-central adapter engines to achieve this? If yes, How do I do this i.e. configuration etc? If not, then what is the best practice on load balancing the Central Advance Adapter Engine?
Thank you for replying,
Mayur

Hi,
I just post your Q&A here.
Cheers,
Aaron
I have few follow up questions regarding your answers.
1. For options 1 and 2, could you elaborate or point me some documentation on sap.help or somewhere else which talks more about these options?
   =========================================
   Basically you have more power with more processes (Instances or Server node) to process your messages in the Adapter Engine. That's the way to improve the system throughput.
   For more information, please refer to SAP PI tuning guide (I could not find the guide for 7.1, but the principle is still the same)
   https://websmp102.sap-ag.de/~sapidb/011000358700000592892005E.PDF
=========================================
2. For option 3, add non central adapter engine and configure scenarios.
    1. So, do I have to run non-central adapters on separate servers?
   ====================
    Yes. It is recommended to run non-central adapter enging on separate server to minimize the reciprocal impact in terms of resource contention.
   ==============
    2. Do I need web dispatcher to do the load balancing between central and non-central adapter engine?
    ========
    No. this is also not possible since the below is true.
    =========
I somehow think that if I am selecting the non-central adapter engine when creating the communication channel then it won't be "load balancing" because I will be sending a particular interface to the non-central engine at design time instead of runtime.
Thank you for taking time and replying to my questions.

How to get Payload of SOAP Message in Advance Adapter Engine

HI All,
I am wondering if anybody can tell me how to view the Payload of SOAP Sender and Receiver Message in Advance Adapter Engine?
Does Anybody know how to check mapping payload in Advance Adapter Engine because in ABAP you can see the mapping payload under Request Message Mapping but when you use AAE you can't see the Request Message Mapping Payload.
I have a SOAP to RFC Scenario in which I can't see the SOAP Sender and RFC Receiver Mapping Payload.
When I am sending incorrect data to an RFC I am getting this error which is very strange and new to me.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Unable to split a synchronous message
Any comments would be much appreciated.
Thanks,
Iqbal

HI All,
I have managed to find Michal's Blog which is talking about getting the mapping payload but unfortunately I don't know how to create Adapter Module so I am wondering if somebody can please provide me EAR file so that I will request the Basis guys to deploy the code and hopefully this will solve my query.
Michal's Blog
As you all probably know while using local Advanced Adapter Engine (AAE) processing in SAP PI 7.1 the message is logged only once (during processing by sender adapter). This is great in terms of performance but what if we need to check the mapping output? Is there a way do do it somehow? It turns out that we don't have such an option in standard yet. Is there any alternative then?
It turns out there is - a simplest adapter module there is...
Local AAE works in such a way that from the sender adapter it executes the receiver adapter so in the outbound message to PI processing you can see the adapter info logs of the receiver adapter and this is what we can use. The idea is to add an adapter module to the receiver adapter which will put the content of the message into the audit log of PI message processing. We can do it by writing a few lines of code:
PI/XI: target message logging with local AAE not possible ? not anymore...
*Please upload the file in any free site or <REMOVED BY MODERATOR>
<READ RULES OF ENGAGEMENT>
Thanks,
Edited by: Prateek Raj Srivastava on Jan 6, 2012 9:10 PM

Advanced Adapter Engine in PI 7.1

Hi there,
Does anyone know if the Advanced Adapter Engine can be installed and run stand alone? i.e. without being connected to an integration engine?
Obviously this would be a Non-Central Advanced Adapter Engine. But does it have to be connected to an ABAP stack?
Thanks.

Hi Krishneel,
>>Does anyone know if the Advanced Adapter Engine can be installed and run stand alone? i.e. without being connected to an integration engine?
I think this is possible, check the note
Note 1314855 - Configuration Wizard: PI-AE initial setup
and summary section of this ppt
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8?quicklink=index&overridelayout=true
Regards
Suraj

Question about Integrated Configuration (Advanced Adapter Engine in PI 7.1)

Hello,
When you use Advanced Adapter Engine in PI 7.1 with Integrated Configuration scenario, it bypasses ABAP stack therefore you can't monitor processed message in SXMB_MONI. Instead this message shows up only in RWB Adapter Engine message monitoring. When you select the message from there, you can view the BEFORE mapping payload in Message Content tab. My question is how do you view the AFTER mapping payload when using Integrated Configuration.
Thanks,
Jay

> My question is how do you view the AFTER mapping payload when using Integrated Configuration.
You can't.
So first you have to configure a standard scenario and test the stuff. When everything is fine, remove the standard scenario and create an Integrated Configuration.

In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

Two items in the Advanced JavaScript window were removed as of the Firefox 4.0 version, but they are still available thru about:config .
Type '''about:config''' in the URL bar and hit Enter. <br />
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''dom.disable_window_status_change''' = double-click to toggle to '''false''' to allow websites to mess with status text.

SMTP Mail Adapter settings

Hi Experts,
I have small doubt regarding SMTP Mail Adapter settings.
Right now i am sending files in attachment to the Users through SMTP.
But now User needs in MIME type for which i can see settings in Security Parameter.
I can see is S/MIME, when i flag that i can see Duration like Days, hours, minutes, seconds.
Could you please tell me what is the significance of it.
Appreciate for your suggestions
Regards,
Bhasker

Hi,
>>>What does Duration means is that if i give duration that security archiving works for that duration
nothing for now - this functionality does not work so it makes no difference what does it mean
Regards,
Michal Krawczyk

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Acrobat Pro - advanced print settings

Hello,
my system: Adobe Acrobat Pro 10.1.7
I want to change the settings under file - print - advanced
the settings under "Acrobat default" and "Custom" are not modifiable
do someone know how it works?
thanks K.W.

Only the fields supported by the selected printer driver are active on that dialog; for example if you don't have a PostScript printer, that section is turned off.

Setting "Advanced security settings" on an OU using Powershell

Hello,
I have been tasked to create an OU with the simular permissions as another. On the current OU, the admin1 acount has special permissions (set within the Advanced Security Settings). For the new OU, they want a new admin2 account to have the same permissions
on the OU as admin1 has on the current OU.
I was able to extract the OU permissions using the following Powershell script:
Get-QADObject 'OU=Temp,OU=,OU=Group,DC=Department,DC=Company,DC=com' -SecurityMask Dacl -sizelimit 0 |
Get-QADPermission -Inherited -SchemaDefault |
Select-Object account, rights, source, appliesto |
Sort-Object account |
Export-Csv c:\temp\report.csv -NoTypeInformation
However, Powershell script did not provide the "Advanced Security Settings". Therefore, I am looking for a couple Powershell commands that:
1. Copies the permission entries of the Advanced Security Settings Properties on an OU
or
2. Sets the permission entries of the Advanced Security Settings Properties on an OU
Any help would be greatly appreciated.
Mxer4life

Hi,
Please try with the following code to copy the atestuser1's ACL on TempOU1 and assign atestuser2 on TempOU2. Please be advised to test in your lab/test environment first. I tested only once. :)
$ou1 = [adsi]"LDAP://OU=TempOU1,dc=adatum,dc=lab"
$user1 = 'adatum\atestuser1'
$ou2 = [adsi]"LDAP://OU=TempOU2,dc=adatum,dc=lab"
$user2 = 'adatum\atestuser2'
$acl1 = $ou1.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user1}
Write-host ($acl1 | out-string)
$acl2 = $acl1 | % { New-Object -TypeName System.DirectoryServices.ActiveDirectoryAccessRule -ArgumentList ([System.Security.Principal.NTAccount]$user2), $_.ActiveDirectoryRights, $_.AccessControlType, $_.ObjectType, $_.InheritanceType, $_.InheritedObjectType }
Write-host ($acl2 | out-string)
$acl2 | % { $ou2.psbase.ObjectSecurity.AddAccessRule($_) }
$ou2.psbase.CommitChanges()
Write-host "After update with $user2"
Write-host ($ou2.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user2} | out-string)
rgds,
AZ

TCP/IP Advanced Adapter Settings

Similar Messages

Maybe you are looking for