TCP-IP ICOM is too slow?
Hello everybody,
I am new to DasyLab (I have good experience with labview though) and am trying to build up a TCP-IP Connection between a PLC and DasyLab10 using the ICOM module . So far I managed to build up a connection and send measured data to dasylab. There it gets decoded correctly and it even displays correctly after some fine-tuning in the options of that ICOM module. But the problem is, the ICOM module works too slow for my TCP-Server.
I have two channels so far and I do send pakets with 2 floats in it every millisecond. No delimiter, no string, nothing else just 8 bytes. So its around 8kB/s. I had different delimiter in it, but some people stated out, that this could slow down the interpretation process.
I tinkered around with packet-size on Dasylab as well as sending more then 2 floats per TCP-packet with no effect. The TCP-connection gets shut down(the server does it, because of an error) within some seconds after the buffer of DasyLab filled up.
I got it working so far for a sample-rate of 1kHz and the packet-size of 1 with maximum CPU-Load on one core (With the "One Measurement per"-option: Gathermode), but only when the line-plotter is minimized. Then it behaves almost as intended. When I increase the packet-size within the ICOM module, than its gets laggy again, but the CPU-Load drops significantly. It seems to process the data considerably slower then with a packet-size of 1. It takes the ICOM Module between 2-10 seconds to process 1 sec of data depending on packet-size with higher packet-size resulting in a slower process. IThe global data-rate and packet-size does not seem to have any influence on that laggyness.
The goal is actually a sample-rate of 2,5kHz with 25channels, which would be around 250kB/s on a direct crossover FastEthernet connection. It should be possible to save all the data to hdd as well as some sort of live view of the data like a line plotter. It would be okay if the plotter only refreshes every 10th second as long as it shows the data live(with no lag, correct timestamp) and completely(every data-point sent by the server is in there, no duplicates).
The wiring diagram so far only includes one ICOM module plus a digital instrument and a line plotter. I have attached it to this message.
Is my task really impossible with DasyLab? Do I need a faster PC? It has got a Core 2 Duo 2Ghz CPU. I feel like I am missing something important to get this up and running.
Thanks in advance. Any help is appreciated.
Have a nice day
Philipp Michalski
Attachments:
Messdaten-1khz.DSB 18 KB
Phillip,
The module is simply not designed for high speed data. You have tried all of the settings... it suggests that DASYLab cannot keep up with the data stream even if you tell it that it's coming in at a rapid rate and to use a larger block.
The only other option is to tackle writing a driver, or having someone write a driver for you. We have two ways to do that - DASYLab 13 Full version has the Script module, or you can purchased the Extension toolkit to write a module using C.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.
Similar Messages
-
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Please anyone with expirience in applets accessing MySQL Server!
I made a test with a loop code executing queries and got the following conclusion:
In media a query takes more than 2 seconds. I used PrepareStatement for better performance but it doesn�t make it better. I�ve heart about persistent connection. It�s realy faster? You know anything I could do for better performance? Obs.: When I ping my server the time answer is 200 ms. I�m from Brazil. But I think it sholdn�t make the mysql too slow as it is. Please help me.....
I�m very thank for ur help..
My java code:
public void ConectaBD()
try
Class.forName("com.mysql.jdbc.Driver").newInstance();
//Class.forName("org.gjt.mm.mysql.Driver").newInstance();
catch(Exception e)
System.out.println("Error: " + e);
try
con = DriverManager.getConnection("jdbc:mysql://labinfor.com.br/labinfor_codvirtual?user=labinfor_cliente&password=800091");
catch(SQLException e)
System.out.println("Error: " + e );
e.printStackTrace();
public void Logon()
java.util.Date start = new java.util.Date();
long startTime = start.getTime();
if (ValidaCPF(TFCPF.getText()))
queryLogon = "SELECT Nome FROM clientes WHERE CPF='" + TFCPF.getText().trim() + "' AND senha='" + TFSenha.getText() + "'";
int indCon=0;
Timer t = new Timer(1000, this);
t.start();
while(indCon<100)
Conecta();
try
stmt[indStmt] = con.createStatement();
rsLogon = stmt[indStmt].executeQuery(queryLogon);
Achou = "false";
while (rsLogon.next())
Achou = "true";
StrNome = rsLogon.getString(1);
LValidaCPF.setText("Bem-vindo " + StrNome);
TFCPF.disable();
TFSenha.disable();
BLogon.setLabel("Logoff");
System.out.println("delay["+indCon+"]= "+System.currentTimeMillis());
if (Achou == "false")
LValidaCPF.setText("CPF ou senha incorreto");
Desconecta();
catch(Exception e)
System.out.println("Error: " + e);
indCon+=1;
}Connection times of 1 to 5 seconds are normal. Pool your connections.
To understand why:
First, setting up a TCP/IP connection takes roughly 50% longer than a ping; a ping is one packet to the server and one packet back, a TCP/IP handshake to create a connection is one packet to the server, one back, and another to the server. Then you have a required brief wait before the connection is considered complete; we'll ignore the wait and call it .3 seconds for the TCP/IP handshake.
Second, the database has to go through the login process. Just sending the login request and response is yet another packet round trip; in your case, that's another .2 seconds in just network time alone. With MySQL, the login involves checking the security of the connection and the user; it often requires a reverse DNS lookup on the IP address of the client. Probably 4 or 5 tables have to be queried and a user environment is created within the server. The server work for the login might take .75 seconds, at a guess. Adding the network time makes this step .95 seconds or so.
Third, there's the time it takes to do the query itself; another network round trip; .2 second network round trip, plus maybe .1 second to run the query on the database, for a total of .3 seconds.
Fourth, there's the time it takes to tear down the TCP/IP connection on connection close. That involves 4 packets, 2 round-trips, so add another .4 seconds.
Adding it all up, you get .3 + .95 + .3 + .4 = 1.95 seconds, of which .3 is your SQL query (network and DB time), .9 is network time for TCP/IP connection and login request, and .75 is DB time for the login. -
10.9.4 update- MacBook Pro now too slow to use
I installed the 10.9.4 update on July 17. Early 2011 13" MacBook Pro. It has since become too slow to be functional. 'Spinning wheel' constantly, and delays after keystrokes. I had no problems at all before this update. I have read that repairing disk permissions sometimes helps and have tried that. I sometimes have brief periods of normal performance, then it slows down again.
The problem is not specific to an application. It is slow regardless of what I am doing, even when first staring up and logging in.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Safari too slow to load a page, need help
Hi mi name is roberto carlos and i really need help please. Since a time ago my SAFARI has become too slow that i can see the difference. I don't know what to do with it. Please somebody help me, how do i fix it.
Thanks.
Message was edited by: robertinhoHi Roberto and welcome to the forums!
Try this:
The following usually works on both Tiger and Leopard:
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
Many, including me, have had success with adding DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
http://www.versiontracker.com/dyn/moreinfo/macosx/33696
Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network. -
Since i upgraded to Yosemite, my iMac is too slow
Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
WHY? How can i change this?1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
Java web start application runs too slow...
Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources. -
Please Help! All Sounds in Classic are too slow now!
Something dreadful happened (wish I knew what) and now every sound that is played back by any Classic application is about 70% too slow.
No matter if it is a Classic game like Unreal (I), Deus Ex, AvP for OS9 (the OSX version works fine), or Quicktime 6, or any other given Classic application. The only sounds that appear normal are the Platinum system sounds.
I don't know which files affect Classic sound playback or where they are located. Can't imagine what could cause that particular problem.
Hope someone could help...
Many thanks in advance
M:A:
PowerMac G5 2x2 GHz Mac OS X (10.4.6) 1.5 GB RAM, standard sound card (TI-TAS3004)
PowerMac G5 2x2Sorry, didnt get an email notification, so I just checked the thread.
Starting and quitting Garage Band actually helped!
(Imagine listening to the meaningful dialogues in "Deus Ex" spoken with Sesame Street's Cookie Monster voice. Aaaaannnd reeealllly sllloowwww. Doesn't quite capture the mood...)
Do you have an explanation why Garage Band should affect Classic sound output?
Thanks a lot,
Martin -
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584 -
I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?
Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen -
No Audio Playback due to Error Message "Disk is too slow. (Prepare) (-10001)"
Out of the blue, no audio playback. Was working just fine earlier today.
I repeatedly get the error message:
Disk is too slow. (Prepare)
(-10001)
NOTE: I have more than enough disc space. That is NOT the issue.
I also just got a second error message:
Part of the Project was not played
This project has too many real instrument tracks to be played in real-time. To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
NOTE: Odd as I have only 2 tracks in the GarageBand file.
Any others experience this? Suggestions?Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob -
Built In application "YouTube" Is Way too slow!
Hey guys, I'm new here btw, so hi to all.
When i watch videos on youtube built in app IT TAKES FOREVER! to buffer the videos, I'm using WI-FI and my net connection is 20mb, I would love to use it but it just takes toooooo long to buffer it would take me 4-5 minute to watch a one minute clip, Any help you'll be my new idol!
The strange this is though, on my computer they load in literally seconds if not instantly are are completely buffered in under 5 seconds for almost any video, yet i could hardly watch a 2 minute youtube video, it buffers then 20 seconds later it stops and it won't supering buffer, i press play nothing happens, it just like it either WAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY too slow or it stops buffering completely, all i know is with youtube being such a big feature, it is almost useless by the terrible coding, or what ever the problem is to make it soo slow, i hear so much people talking about youtube and there iphone but mine is just too painfully slow to watch(and no 100% not my connection)Is there any youtube settings??? Can any setting be changed which relate to youtube? And is it possible to watch youtube through safari and not through the standard application?
NO, there are no settings. Flash will not play in Safari yet, but there is a workaround using VideoHamster.
Here are a couple of Flash YouTube videos on my server that I converted to QT with CosmoPod. How do they load for you? I have a 1M up cable connection. They should start loading and playing after a few seconds. YouTube videos start playing after about 5 seconds on mine.
http://bmer.servemp3.com/test/
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
Select Data from aufm too slow
Hi experts,
I have a query in my report but its performance too slow.
is there any proper way or any way to improve the performance of below query.
SELECT * FROM aufm into table i_aufm " collecting input material document numbers
WHERE mblnr GE '4900000000'
AND mjahr GE '2008'
AND zeile GT '0'
AND matnr EQ matnr_101-matnr
AND werks IN p_werks
AND charg EQ matnr_101-charg
AND bwart = '101'.Hi,
1 .Dont use * from any table.
2. Create a internal table that u want to retrieve the data from that table. (Structure).
Eg:
types : begin of str_ekko,
ebeln type ekko-ebeln,
bsart type ekko-bsart,
aedat type ekko-aedat,
endof str_ekko.
data : itab type table of str_ekko,
wa_itab type str_ekko.
In the above u want to take care that while creating the structure u want to look the sequence of fields in the table. in the same sequence u want to create the structure.
3 . The Select-options fields also wants be in the same field sequence of the table.
eg : select ebeln bsart aedat from ekko into table itab where ebeln in so_ebeln and
bsart in so_bsart and
aedat in so_aedat.
4. If the above things are not working just look the indexes of that table. Just create a secondary index with ur requirement. -
Bumblebee performance is too slow
Hi everyone,
This is my second post in this forum and it has been only 2 days that I met Arch. Before, I was using Ubuntu for 3 years, but due to low performance in my PC, unfortunately, I decided to say good bye which was hard to say.
Now, I am trying to have the same setup as my previous laptop and Bumblebee was one of them. I followed the instructions here: https://wiki.archlinux.org/index.php/Bumblebee.
It seems that bumblebee is installed and working, however, the FPS is too slow:
$ optirun glxspheres64 -info
Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: GeForce GT 520MX/PCIe/SSE2
0.023848 frames/sec - 0.021114 Mpixels/sec
Without optirun I get:
$ glxspheres64 -info
Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
0.033237 frames/sec - 0.029426 Mpixels/sec
0.029968 frames/sec - 0.026533 Mpixels/sec
This is impossible as I was getting very good results before.
I am wondering if I did something wrong, or missed anything.
Just for information, system specs:
Intel i7 2670QM 2.2 GHZ
4 GB RAM
1 GB GeForce GT 520MX
512 MB Intel Graphics
I played 0ad with and without optirun and the performance was good in both of them, but not sure if it switches the video cards itself.
I also have bbswitch installed.
Any help would be appreciated. Thank you.
Last edited by wakeup12 (2014-09-27 14:29:19)Hello,
Can you please explain in a little more detail the scenario you testing? Are you comparing a SQL Database in Europe against a SQL Database in India? Or a SQL Database with a local, on-premise SQL Server installation?
In case of the first scenario, the roundtrip latency for the connection to the datacenter might play a role.
If you are comparing to a local installation, please note that you might be running against completely different hardware specifications and without network delay, resulting in very different results.
In both cases you can use the below blog post to assess the resource utilization of the SQL Database during the operation:
http://azure.microsoft.com/blog/2014/09/11/azure-sql-database-introduces-new-near-real-time-performance-metrics/
If the DB utilizes up to 100% you might have to consider to upgrade to a higher performance level to achieve the throughput you are looking for.
Thanks,
Jan
Maybe you are looking for
-
Universal Access System Pref disappeared
Recent MBP, OS X 10.7.4. Up until today, Universal Access worked perfectly (Command-option-+/_ to zoom screen). Today, when I tried it, it didn't work. When I opend System Preferences, Universal Access System Pref had disappeard. I tried moving t
-
Safari 7.0.3 Command Key Issues
My Safari 7.0.3 is acting strange - some of the command-key combinations simply don't work, while others do. For instance, command+p successfully opens the print window. However, command+f does not open find. Command+[ won't go back either. Any id
-
Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class CPU time 1,167 86.9 db file sequential read 111,047 223 2 16.6 User I/O log file sync 77,390 132 2 9.9 Commit log f
-
Help!! yoga pro 2 computer suddenly started to overheat, fan started making loud noises
My computer just suddenly started to get really hot and the fan is always very loud, this just happened one day and is always really really hot, anybody have any ideas what happened, what could be the problem ? thank you so much, here is a screen
-
Hello. My iPhone 4s when recieving message plays the tone more than once. How to stop that?
It plays the tone more than once and it's not playing the tone fully. It plays like it is "stuck". Like CDs play when they are scratched. How can I stop that?