TCP Listen vi does not work in Labview RT 7.0

I'm trying to use a TCP Listener to accept connections from another PC on the local network.
When running the program with Labview 7.0 all works fine and I'm able to receive IP packets from the remote PC.
However, when I run it in Labview RT 7.0, the TCP listener does not listen on the specified port.
Another issue - after running the program in Labview 7.0, and then trying to run it again with Labview RT 7.0, if the specified port
is the same, I get error 60: "The specified network address is currently in use."
I'd appreciate your help,
Alik

Hi alikm,
I am a little confused on what your set up is. When you say that you are running LabVIEW Real-Time, do you mean that you are running the program on a Real-Time target? How are you establishing that the project you are setting up is a Real-Time project?
Also, if you are trying to access one port at the same time using two systems, you will get an error that you are not able to do this, since you can only write to a single port once at a time.
Regards,
Stephen S. 
National Instruments
Applications Engineering

Similar Messages

  • C DLL does not working in LabVIEW-20​11, but works good in LabVIEW-20​09

    The C-Language dll which I have for an instrument is working good in LV2009 without any errors, but in 2011 it throws 1097 Error code.  In this link, it is mentioned that calling convention in "Call Library Node" is changed since LV2010 which I guess could be the reason for the error.  But trgically I need to develop my code in LV2011.  Does anyone have an workaround to make the dll work in LV2011?
    Thanks,
    Ajay. 
    Solved!
    Go to Solution.

    And the particular issue at hand is, that stdcall functions CAN have but DON'T have to have a particular naming decoration in their exported name (a @<number> appended to the name, and LabVIEW doesn't show this decoration in the drop down box). Before LabVIEW 2010 the Call Library Node automagically corrected a configured C calling configuration to stdcall if it recognized that decoration. They removed that in 2010 because it is possible, and most probably happened in the wild, for a C function to be explicitedly named with this pattern but get exported as C calling convention. With this automatic and hidden correction, LabVIEW is totally unable to call such a function.
    The not so nice thing about this would be IMHO that this automagic correction happened sneakily in the background without even being visible at all (the option in the Call Library Node stayed C calling convention, despite that LabVIEW really decided to use stdcall). And it got made even worse by the fact that 2010 removed this sneaky correction but did not add any mutation code to correct for that, when updating a VI from a previous LabVIEW version. That all said the evil has been done and can't be reversed now. Everybody just has to live with it.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Why does not work my LabVIEW VI on PDA well? -without error message

    I have a LabVIEW VI with subVI's. It works on desktop Windows very well. If I buid it for PDA , there is no error messages. When i it start on PDA, the problem seems to be on the chart.There is an Adams-Basforth Integrator subVI, and in the subVI there is a Formula Node, perhaps there is the problem. I use LabVIEW 7.1 and PDA Modul.
    How can i build this LabVIEW VI for PDA perfect?
    Attachments:
    integral.vi ‏51 KB

    Dear smarci
    Have you tried building your VI without the SubVIs ("CLK.VI", "INT.VI" and "TIME.VI"). It would be interesting to see whether these cause the program to not execute properly.
    Have you looked if your PDA's resources (i.e. RAM memory) are sufficient for you VI?
    Best regards
    Philipp Roessler

  • NI Report does not work in LabVIEW 7.0

    I was running Text Report Example.vi. Every time the Set Report Font.vi is called, error message "Error -2147352573 Member not found" is poped up. I tried to remove the NI Report and reintall the run time engine, the same error message still show up. Except the solutions posted on NI web site, is there any other settings I shoud do?
    Thanks.

    This may be way off in left field, but you do have the font that it is trying to set it to, right? I don't know what the error means, but that would be something to start with.
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • At-mio-16xe-50 does not work with labview

    I am putting together another system. I set the daq board with the values recorded from the first system using ni-daq. The setup passes the test in ni-daq. I get the correct readings using ni-daq, but when I go to my labview application I do not get the right readings. The readings seem to be just noise.

    In my experience if you get a correct reading in a test panel in MAX you should get the same reading in LabVIEW. Are you using virtual channels? How are you viewing the data? If you are looking at the data in a chart, is the chart auto-scaling making the signal appear to be noise? What type of signal are you reading (analog, digital, etc.)? Have you changed the default input limits for the board? Is the signal you are reading a constant source? If you are able to answer some of these questions it might be able to give you a more definitive answer.

  • I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

    I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
    Any ideas on how to correct this?
    Thanks-Vitaleyes

    I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset.  My Blueant T1 does support it and plays the music through the deadset.

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

    I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
    Can anyone help?
    I have the iphone 4s.
    Thank you!

    Hey Chris,
    Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

  • Access to Outlook Anywhere does not work

    Good evening,
    I recently installed an Exchange Server 2013 CAS / MB.
    Until now, the server presented a few errors (mainly in the
    event log) that does not seem to significantly influence functionality.
    This week I published the server on the Internet and verified various malfunctions
    related to the access from outside.
    In particular from outside:
    1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
    2 - Outlook Anywhere does not work from internet.
    I've done a lot of research and testing without success.
    With regard to the first issue (which is not a priority but can relate to second one)
    add that in Firefox I get a first authentication request. If
    I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
    I assume that the first is the integrated Windows application and the second is basic authentication.
    Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
    The problem is
    priority 2:
    Outlook connects without problems on LAN network, the Internet
    seems to download the correct information
    (autodiscover), but then does not connect
    to the server (connection to Microsoft Exchange is unavailable).
    If you manually edit the settings,
    auto-configuration server returns as
    a [email protected]. If I change
    manually the server (and proxy settings
    http), the result does not change.
    - Setting information -
    The server is installed
    in the LAN network and is exposed on the Internet through
    a firewall (Pat on port 443, et al. not 80)
    on a public address.
    The public and private DNS have been configured with a
    host record (A) and two
    CNAME (webmail and autodiscover).
    The internal Outlook clients connect
    with autodiscover and HTTPS /
    NTLM / SSL (Outlook connectivity
    status).
    IMAP, SMTP, POP, ActiveSync function.
    Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
    port 443 and try port 80, SPF isn't configured).
    The navigation to the url
    https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
    Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
    Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
    - MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
    Ask for further information.
    - Cmdlet and Autodiscover output -
    Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
    Name                               : Rpc (Default Web site)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    SSLOffloading                      : True
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    ExternalHostname                   : webmail.name_domain.test
    InternalHostname                   : webmail.name_domain.test
    Get-OutlookProvider | ft -autosize
    Name     Server CertPrincipalName                      TTL
    EXCH            msstd:webmail.name_domain.test         1  
    EXPR             msstd:webmail.name_domain.test         1  
    WEB                                              
         1  
    Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
    Name                          : Autodiscover (Default Web site)
    InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    LiveIdNegotiateAuthentication : False
    WSSecu.testyAuthentication      : True
    LiveIdBasicAuthentication     : False
    BasicAuthentication           : True
    DigestAuthentication          : False
    WindowsAuthentication         : False
    OAuthAuthentication           : True
    AdfsAuthentication            : False
    InternalUrl                   :
    ExternalUrl                   :
    Get-MapiVirtualDirectory | fl name,*auth*,*url*
    Name                          : mapi (Default Web site)
    IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
    InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    InternalUrl                   : https://webmail.name_domain.test/mapi
    ExternalUrl                   : https://webmail.name_domain.test/mapi
    Autodiscover.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>user</DisplayName>
          <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
          <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
          <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
            <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
            <ServerVersion>73C082C8</ServerVersion>
            <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
            <AD>DC2.name_domain.test</AD>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
            <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>LAN</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>
    Get-OwaVirtualDirectory | fl name,*auth*,*url*
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Basic}
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://webmail.name_domain.test/
    ExternalUrl                   : https://webmail.name_domain.test/

    Follow the results of the test
    Outlook Anywhere (RPC over HTTP).
    Has been used an account for which
    outlook anywhere works. The account
    for which the outlook anywhere does not work is
    an administrative account and therefore
    can not be used in the test.
    Autodiscovery returns the
    same result for both mailbox.
    I'm testing RPC/HTTP connectivity.
    Testing RPC over HTTP has not been exceeded.
    Test steps
    Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
    Test the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to contact the Autodiscover service with each method available.
    I was not able to contact the Autodiscover service with no method.
    Test steps
    I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.www
    I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
    L = city, S = state, C = test.
    I am validating the certificate name.
    I could not validate the certificate name.
    More info about this issue and how to resove it
    The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
    I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Other details
    Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
    I am validating the certificate name.
    I validated the certificate name.
    Other details
    I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
    Elapsed time: 1 ms.
    I am validating the reliability of certificates.
    I was not able to validate the reliability of the certificate.
    Test steps
    Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
    I failed to build a certificate chain for the certificate.
    Other details
    Failed to generate the certificate chain.
    May be missing the required intermediate certificates.
    I'm trying to contact the Autodiscover service using the HTTP redirect method.
    I was not able to contact the Autodiscover service using the HTTP redirect method.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
    The specified port is blocked, is not listening or doesn't produce the expected response.
    More info about this issue and how to resove it
    I encountered a network error while communicating with the remote host.
    I'm trying to
    find the
    SRV DNS record _audiscover._tcp.domain_name.test.
    I failed to find
    the SRV record of the
    Autodiscover service
    in DNS.
    Some clarifications:
    1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
    are two static public addresses
    of which only the latter exposes Exchange services;
    2 - The certificate
    *. Domain_name.test is not related
    to Exchange services;
    3 -I imported the certificate
    of the issuing CA on the standalone test PC to validate the certificate.
    3- The port 80 is not open and are not published SRV records.
    Best regards.

  • WCCP does not work between WSA and ASA

    I have configured WCCPv2 between WSA S160 (         6.3.1-025) and ASA5540 (8.2(1)109).
    Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
    If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
    It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
    I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
    Does anybody have any idea what the problem is and how I can resolve it ?

    IronPort Support team helped me to find the trouble:
    If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
    ("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
    The WSA guide doesn't clearly say about it.
    So the Discussion can be closed ...

  • RDP does not work after disabling TLS 1.0

    RDP does not work after disabling TLS 1.0
    Had to re-enable it .... what can i do to make it work with TLS 1.2 ??

    Hi,
    Disabling TLS 1.0 will break RDP under default settings.  Did the security scan say specifically to disable TLS 1.0?  Normally you should be able to disable use of certain ciphers or prioritize ciphers.  You may want to try IISCrypto, on
    it you click the PCI button, then Apply button, then restart your server.
    Additionally there are still a substantial number of web browsers in use that do not support TLS 1.1/1.2.
    If you would like to continue with TLS 1.0 disabled you may change the RDP Security Layer.  To do this please open Terminal Services Configuration (tsconfig.msc), double-click RDP-Tcp, change Security Layer to RDP Security Layer.
    IMPORTANT:  You are vulnerable to MITM attack when using RDP Security Layer because there is no Server Authentication.  If you are running RDP over a VPN connection and there is no risk for interception then this may be okay.  I recommend
    you re-enable TLS 1.0 and have a ssl certificate from a public authority set on your RDP-Tcp listener.
    Quoted from this thread answered
    by TP, for more information you can go through that thread. 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My speaker does not work on my iPhone 5

    when i'm talking on the phone, and decide to put the call on speaker, the button(function) does not work.  As well, when I attempt to listen to my voice mail using the speaker mode, I cannot hear the messages....What is going on?

    Tried resetting the phone, by holding down the sleep/wake button and the home button at the same time until the phone restarts? It did not solve the problem.

  • Sprinboard screen does not work on android device

    Hi experts,
    I have a mobile application that i coded on JDEV 11.1.2.4. And i deploy via sdk android-4.3 version. I set DefaultSpringboard on adfmf-application.xml file.
    When i deploy on AndroVM or another Android VM either SDK Emulator, i can see springboard screen properly. But deploy on real devices (tried with Android 4.1.1 Tablet, Android 4.1.2 Sony experia phone, Android 2.3.5 HTC phone) could not see anything, just seen black screen with header(written as applicationName) AdfmfContainerUtilities.showNavigationBar(); does not work also.
    How can i resolve this?
    Also i tried to create completely new adf mobile application that contains only 2 feature and applied the scenerio, it fails on real device too. I think that the problem is on loading featureList. Because when i created an amx page and set as CustomSpringboard. It works
    Please help me..
    brgds
    I m adding my adfmf-application.xml file content, essentially i tried almost all different setting in it.
    <?xml version="1.0" encoding="UTF-8" ?>
    <adfmf:application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:adfmf="http://xmlns.oracle.com/adf/mf" name="MLMobilKatalog"
                       id="com.accmee.MLMobileCatalogue"
                       appControllerFolder="ApplicationController" listener-class="com.accmee.application.LifeCycleListenerImpl">
      <adfmf:featureReference id="com.accmee.Login" showOnSpringboard="false" showOnNavigationBar="false"/>
      <adfmf:featureReference id="com.accmee.productList"/>
      <adfmf:featureReference id="com.accmee.productDefinition"/>
      <adfmf:featureReference id="com.accmee.favourites"/>
      <adfmf:featureReference id="com.accmee.messages"/>
      <adfmf:featureReference id="com.accmee.categoryDef"/>
      <adfmf:featureReference id="com.accmee.exit"/>
      <adfmf:featureReference id="com.accmee.menu" showOnNavigationBar="false" showOnSpringboard="false"/>
      <adfmf:featureReference id="com.accmee.menuList" showOnNavigationBar="false" showOnSpringboard="false"/>
      <adfmf:preferences>
        <adfmf:preferenceGroup id="application">
        </adfmf:preferenceGroup>
      </adfmf:preferences>
      <adfmf:navigation>
        <adfmf:navigationBar enabled="false" displayHideShowNavigationBarControl="false"/>
        <adfmf:springboard enabled="true" showSpringboardAtStartup="false" displayGotoSpringboardControl="false" animation="none"/>
      </adfmf:navigation>
    </adfmf:application>

    Per the release notes, Wallaby only supports Chrome and Safari at this time.
    And yes, it only works with Adobe Flash Professional CS5 files. To use older Adobe Flash Professional files you can resave them in CS5 and then run them through Wallaby. This is a technology preview (not a product) and therefore has certain limitations that might not exist in a shipping product.
    You mention this doesn't work on an itouch G3. You mean an iPod touch G3, yes? What version of iOS do you have installed on your iPod touch? This may be related to incorrect serving of SVG content (if you are using apache) and so you may need to update your .htaccess file in apache per the Wallaby technical tips page.
    Michael O'Rourke
    Adobe Wallaby Team

  • Home Sharing does not work. It's time for Apple to act.

    My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
    My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
    I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
    Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck.  I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
    There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
    Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
    I suggest you either make it work or turn off the feature.
    Joe

    If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
    If you can't correctly identify what is causing your problem, you are never going to fix it.

  • My Garageband does not work with Symphonic Orechestra or USB Boombox

    I have two Macs: the main one is an iMac with Intel Core Duo 2 GHz, 1.5 GB RAm and 250 Gb HD, with OSX 10.4.8, and all the latest software upgrades as I download them as soon as they are available. The secondary Mac is a normal iBook G4-800 with 640 Mb RAM and not always the most recent plugins, but since a few days also the latest ones.
    I premit I do use GarageBand to produce professional level music and in time I bought several new music features. I am a Mac user since ever and I never (I say again NEVER) uploaded any software (or loop) who wasn't regularly licenced and usually bought from Applestore itself.
    NOW THE PROBLEM:
    Since I sold my old iMac G5 and implemented my CoreDuo I experienced a problem with Garageband: the external plugins for Garageband (such as the old and excellent "East West Quantum Lightning Symphonic Orchestra" but also the very recent USB "Classic Boombox" and "Ethnic Boombox" are not working. Those software instruments does appear correctly in the menus, but does not work. When I try to select them it appear this sentence (in italian, I will try to translate it approximateively):
    "the plugin is not available. To add this loop using the same sound you heard in the browser loop, press the Option key and drag contemporary the loop in a new track"
    This it happens all the times I try to set an instrument from EastWest or USB plugins from my iMac. As to make a confrontation, I installed the same softwares on my iBook and they work perfectly (with the only exception that I can't work from the iBook since is far too slow for me to use it with some profit).
    Someone an help me or explain if there is anything I can do to fix my problem?
    East West said the pluging should work (and to be honest it works correctly on the G4 as it did work properly with the G5). I own the USB software just since a few days, so I didn't ask them yet, but since is not just them, I guess is something else and do not know what may be the cause.
    Some of you do have some hint or idea?

    Yep, I understand...
    This is the final news I needed to get to complete my answer... I confronted myself the italian store and the US one and in the US one I didn't find this product...
    As for the NI software, was so good that I just bought back my good "old" iMac G5 and will exchange it with this my Intel Mac. The G5 2 Ghz was good, performing as this new Intel (at times I even got the impression was more performing, but I believe is just an impression) and surely didn't have so many 3rd parties problems.
    Meanwhile I filled every forum of NI and USB with my questions about the compatibility... and maybe I will be back to an Intel Mac when all would be OK, I'm not in a hurry!
    By the way I had a listen to your work: GREAT!
    You may hear a sketch version of something we did work on with the NI piano and choir sounds, while the alto sax is played live and the other instruments are from Apple or real keys (yes, we mix a lot of things):
    http://www.garageband.com/song?
    while here is a track where we did use both the Orchestral sounds of Garageband (and some of it's loops, mixed with some good old programming) together with some NI sound:
    http://www.garageband.com/song?
    We do not often use orchestra if not as here and there (other than in some work as this last one, but is not so frequent). Hope you may like our little works!

Maybe you are looking for