TDS down payment at teh time of vendor down payment not working
Hi All
Can any one suggest why TDS is not getting deducted at the time of vendor down payment.
TAx type and tax code has been created for payment and GL account assigned for this for paid over. These codes are assigned to company code and vendor master data as well. In vendor masterdata it has been ticked on 'liable' also.
But when making doc with F-48 for vendor down payment, it is not populating for TDS deduction and hence no tds has been deducted.
Can anyone suggest if any more settings is required.
We are in ECC6, and using extended withholding tax for India.
Refgards
Mukta
Hi Venkat
Actually all the mentioned steps already followed. I removed tax code from vendor master , but it doesn't help.
At the time of invoice posting TDS is working fine, but at the time of advance payment it is not working.It is not populating withholding tax popup at all.
In the tax type below are the settings- (standard SAP settings)
calculation--
base amount- Gross amount
Rounding Rule- Round w/tax amnt up
Cash discount- c/disc pre w/tx
Post w/tax amount -- checked
Accumulation type-
No accumulation - selected
Control data-
W/tax base manual - checked
Manual w/tax amnt- checked
w/tax for pmnts- checked
No cert numbering- checked
Define minimum/max amounts
w/tax code level- selected
withholding tax amount-
w/tax code level- selected
Central Invoice
No cent invoice - selected
Minimum check-
Minimum check at item level- selected
Withholding tax code settings--
Base amount - 100%
Posting ind - 1
with tax rate- 2%
These all are in extended withholding tax settings.
Can you please check why at the time of advance payment it is not asking for any withholding tax.
Regards
Mukta
Similar Messages
-
No WHT deduction at the time of Vendor down Payment
Hi All,
I want to calculate WHT at the time of Vendor Down Payment in F-48 but system is not deducting WHT.
I checked the WHT Configuration, it is ok.
WHT is liable in vendor Master data.
WHT in Field status group of Reconcilliation Account is not suppress.
Pop up menu display of WHT in Vendor down payment in F-48 but not deducted.
System generate entry Vendor Dr, Bank Cr.
Waiting for solution.
Regards
AJHi,
Please check whether the configuration in Withholding Tax Type for payment postings are done properly, and see to that the Central invoice settings are done properly... and also check "Define Min/Max Amounts for Withholding Tax Codes"
Regards
Edited by: Sathish Kumar.K on Oct 27, 2011 9:23 PM -
I need some assistace to what is up with LR 6 standalone with free CC loose program everytime program is shut down or machine is turned off, says CC is not working,
I need some assistace to what is up with LR 6 standalone with free CC loose program everytime program is shut down or machine is turned off, says CC is not working,
-
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?
Thanks for replying (thorvsphoenix)
The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard. -
my iphone 4 3g is completely frozen. I took a picture and it's frozen on the picture. Holding down the button on top to restart it does not work.
Keep Pressing and Holding the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear..
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.
You can download Creative Suite 5 here:
Other downloads
To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
Adobe ID, sign in, and account help
See the bottom of the page for a link -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!
- Try here:
iOS: Device not recognized in iTunes for Windows
- Next try a different computer to help determine if you have a computer or iPod problem. -
I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?
Is your iphone hacked/jailbroken?
-
my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me
hold the power button and home button for about a minute
plug it into a computer with itunes on
either way should work -
hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?
Anyone have any suggestions? or is everyone else just as clueless as me !
Maybe you are looking for
-
Can I sync phone book entries of two different phones into one address book
My wife and I have two motoroal phones (different models) and one iMac at home. I have synced my phonebook entries in the address book and it works fine. Trouble started when I tried to sync my wife's phone. All my numbers and details got downloaded
-
IPhoto and compression of uploads to iWeb albums and Web Galleries?
It appears it's been established that iPhoto automatically sizes uploads to Web Galleries and iWeb albums to 800x600 no matter the resolution of the original picture. http://discussions.apple.com/thread.jspa?messageID=5118968#5118968 You can clumsily
-
Hey super forum fans, There is functionality in the forums that will allow us to add field(s) to the end of each message. I'm curious if you guys had good ideas on how to implement this in our community (or if we should implement it at all). PROs: W
-
I need to resolve a problem of encoding in a scenario IDOC->JMS. I'm receiving Idoc from R/3 ->XI -with special characters that are not recognized in the target system (WebMethod). I saw some recommendations on the forum to use anonymizer.encode to s
-
How do I cut one large clip into several manageable ones?
I have imported some very large files (100 GB or more each) from film conversions. I need to cut them into clips so I can manage them. I looking for suggestions. Thanks La Bete