TDS rate difference

Hi,
My client is having an issue, since we have configured tax codes for a particular vendor at 2% rate and accordingly my client has deducted withholding tax from vendor payment at 2% but actual rate is 10%. Now he is asking us to define new tax code with 10% rate and also he wants us to make adjustment for previous bill TDS difference.  Pl. suggest how to adjust deficit deduction.
Thanks in advance

Hi,
Please Try through Tcode J1INJV.
Regards
Aditya

Similar Messages

  • Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

    Hi Gurus,
    We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
    1)
    G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
    Posting:
    Service A/C.....100 USD (Rs. 4900)
         To SR/IR Clearing A/C...100 USD (Rs. 4900)
    2)
    MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
    Posting:
    SR/IR Clearing A/C......100 USD (Rs. 4900)
         To Vendor A/C...........90 USD (Rs. 4320)
         To TDS A/C..............10 USD (Rs.  480)
         To Exch. Difference A/C. 0 USD (Rs.  100)
    This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
    3)
    Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
    Vendor A/C......90 USD (Rs. 4320)
    TDS A/C.........10 USD (Rs.  480)
         To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
    4)
    Now when we try to post MIRO again, it is posting the following entry:
    SR/IR Clearing A/C......97.96 USD (Rs. 4800)
    Exch. Difference A/C.....2.04 USD (Rs.    0)
         To Vendor A/C........... 85 USD (Rs. 4080)
         To TDS1 A/C............. 10 USD (Rs.  480)
         To TDS2 A/C.............  5 USD (Rs.  240)
    This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
    Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e.  4800 / 49).
    Please help.
    Thanks!
    Regards,
    Angad Nagpal

    Solved.
    The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
    Thanks!
    Regards,
    Angad Nagpal

  • Exchange rate difference in f-03

    Hi all
    pl. help me. I am not able to clear open item in f-03 which is maintained in BRL.  I am posting payment in usd. the error reads:
    Ex.rate diff.accts are incomplete
    Diagnosis
    The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
    System response
    The system cannot generate the exchange rate difference posting.
    Procedure
    By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards. 
    I have called transaction OBA1, and entered the GL a/c and currency BRL.  Even i cannot save it says
    "Enter line items first or choose open items"
    pl reply friends urgently
    Thks
    uma

    Hi Uma,
    Exchange Rate has been defined both the end. Like INR = USD and USD = INR.
    Here you are not yet defined GL account for Exchange Rate Difference account (Gain or Loss).
    T.Code OB09 Define G/L , Currency and Currency Type.
    Before that you would have the GL account please create in FS00.
    Hope it will help you.
    Regards,
    Sivakumar Sathiyamoorthy
    +919916131375

  • Exchange rate difference between MIRO and GR/IR

    Hi,
    Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
    Thanks in Advance
    Regards
    Venkata Suresh

    Hi,
    At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
    There enter the exch loss GL account and enter the diff amount.
    Thanks,
    Srinu.

  • SGD Exchange Rate Difference JE appears in Customer Aging Report

    Dear Experts,
    SAP Version: 8.81
    Local Currency: SGD
    We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
    Next, we go to Customer Aging Report and select this USD BP.
    When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
    When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
    Above is the behaviour in 881.
    Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
    What is your opinion about the behavior in 881? Will you consider it as design or issue?
    Thanks.
    Regards,
    Lay Chin

    Dear all,
    This problem is no longer there when upgrade to 881 Patch 08.
    Regards,
    Lay Chin

  • Excise Invoice printing for Rate Difference

    Ref : CIN
    Business Scenario :-
    We are have to Prepare the Excise invoice for the price difference (rate difference) & we are have to charge the Excise duty & Tax to the customer.
    Here we are preparing the debit memo request & then preparing the Invoice with reference to Debit memo. But here we are unable to prepare the Excise Invoice through J1iin  as delivery is not involved it. Therefore for updating the excise records we are a entering through J1IH.
    But due to this we are unable to print the excise invoice on the preprinted Excise invoice stationary & Our customer requires the Excise Invoice.
    Also the document flow is not been generated & user are facing lot of problem.
    This is business critical scenario for us & we have to charge the price difference to the customer.
    You are requested to give the solution to the above scenario.
    Transaction code used
    VA01 VF01  J1IH
    Regards
    Umesh Bagul

    Hi,
    I understand ur scenario and same we too also the requirement.  But in SAP system will not support to create Excise Invoice other than the billing catory M & U.  In those price differece scenarios, create ur own order related billing type with billing category as M and maintain copy controls in CIN wilth delivery type as blank and billing type as ur new billing type.  If u do these settings system allow to create the EI or if you want to create EI through standard debit note functionality then you require to change the source code.
    Regards
    Goutham

  • Exchange rate difference not getting posted to KDM account during MIGO/MIRO

    Hello Gurus,
    I have a purchase order with many line items. For some of the line items, the exchagne rate difference between the date of MIGO and the date of MIGO is taken to the KDM account. But for some other line items, it is not being taken the KDM. For such line items, the value of the GR/IR account in the local currency is different from MIGO to MIRO. Due to this, the GR/IR clearing is not happening automatically.
    Do you have any idea, why the system is not taking the different to KDM for some line items and taking it correctly to KDM for others.
    The only difference that I noticed between these 2 line items was
    In case where the KDM account is determined, the GR was done for only one line item
    In case where the KDM was not determined, the GR was done for more than one line item.
    Thanks in advance for your replies
    Thanks and Regards
    Venkatesh

    Hi Venkatesh,
    I suspect that in your system may be the setting in OMRW is not activated. If the CCurr indicator is not activated for respective company code. Please refer to the information from note 980402 :
    After you implement this note, you can use Customizing transaction OMRW to make settings for the new logic for each company code and each currency (the first local currency and two other material ledger currencies, if the material ledger is active). If the CCCurr indicator (V_169P_PK-KDHW) is set, this activates a new logic for calculating the exchange rate difference (KDM amount) in the company code currency (first local currency). As a result, the system also generates KDM lines for purchase orders with account assignment and for purchase orders with MAP materials in inventory management and in invoice verification if required. If the material ledger (ML) is active, you  can set a corresponding indicator for additional ML currencies.Bear in mind that the system performs a 1:1 cancellation for the KDM line in the cancellation transactions.
    If the indicator is not activated, then the new logic for calculating the exchange rate difference is not active.
    I hope this helps.
    Regards
    Ravinagh Boni

  • Unexplained exchange rate difference

    We have created a delivery plan in USD (our local currency is EUR) without fixing exchange rate. This plan has a received several GR and IV at different rates. The material is valuated at standar value.
    D.Plan: Rate A , price 15,96 USD/UN
    month 1 - GR and IV at rate B
    month 2 - GR and IV at rate C
    month 3 - GR and IV at rate D
    All invoices are posted at a price of 14,32 USD.
    In month 1 we had price difference due to differences with the standard price. That was correct.
    In month 2 the system has posted unexpected exchange rate differences (key DM). We don't understand them as fas as GR and IV were posted at the same rate.
    Could it be that the system is using the rate of the first IV? We wonder the way SAP is calculating that exchange rate difference?

    no replies

  • MIGO exchange rate difference incorrectly.

    In transaction MIGO exchange rate difference lines are generated for planned delivery costs. In some cases we found the difference exchange rate comes from the exchange rate of the purchase order, and other times we cannot find where the difference comes from. Both cases are incorrect.
    Note 1278540 has already been inplemented.
    Any idea?
    Thanks,
    Cecilia

    hi,
    If you make the exchange rate as Fixed via using the indicator in the PO header, then system will take this while GR and IR....if not maintained, then system will take from EKAB table...
    Regards
    Priyanka.P

  • FI Forex gain loss & Exchange Rate difference on Foreign Currency & Chart of Accounts

    Dear All,
                 I have queries on following :
    1) what is difference b/w Forex gain loss account & Exchange Rate difference on Foreign Currency account .
    2) Under which Heads in Balance sheet they should come as per Indian Accounting Standards.
    3) Are these accounts common for Vendor & customers or different.
    4) they record FI data at Company code level or at sub-ledger level first (Vendor /Customer) .
    4) Is it advised to use same Chart of Accounts to two companies in same country by using different GL's with different FSV?
    Regards
    MJ

    Hi M J,
    Please note the answers below:-
    1. It is one and the same thing. When you say forex gain/loss account, it means a GL account and exchnage rate difference means, the difference in rates at which you purchased/sold and the rate at which you made paid/collected.
    2. Ask Client where they want to show these GL's in Financial statement Version.
    3. The configuration setting is in OB09 and SAP allows you to keep same or diff GL for both realised Exchnage rate gain/loss. It depends on how you want to see. technically it is possible.
    4. The Valuation is done at company code level, but individual records are picked up at vendor/customer level. It means that the revaluation gain/loss adjustment is not given to each individual Vendor/Customer, rather it is posted to a GL - Balance Sheet adj.
    5. Yes, you can use same chart of accounts and you do not need to create separate GL's at the company code level for two company codes. Same GL's can be used as the posting is made at Co. code level.
    Regards,
    Kavita
    Note : Please raise separate thread for different questions. Your Point No. 5 is not related to the rest.

  • Whrere to create the Exchange rate difference key in customizing?

    HI All,
    I've to create the Exchange rate difference key, to put in the master data of G/L Account.
    Could anyone show me the customizing navigation to create it?
    Thanks a lot

    Hi,
    to have this functionality you must define you GL account in OB09 and addicional accounts for exchange gain/loss.
    let me know if it helps.
    regards

  • Posting of Exchange rate differences in parallel currencies

    Hello experts,,
    We are on ECC 6.
    When we enter an incoming invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
    Is this a standard feature / behavior? If so, where can i find the settings.
    Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
    The material ledger is not active.
    We have maintained a local currency and a group currency.
    Example to illustrate my issue -
    DC = JPY
    LC = SGD
    GC = USD
    PO for asset.
    PO value = 100000 JPY
    Ex rate not fixed in the PO.
    Ex rate at PO -
    100 JPY = 1.6 SGD
    100 JPY =  0.85 USD
    Ex Rate at IR
    100 JPY = 1.7 SGD
    100 JPY =  0.9 USD
    When IR is entered,
    The exchange rate difference of 100 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 50 USD).
    At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 50 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
    Thanks in advance for your advice/solution.
    B. Regards,
    Halaswamy

    Hello,
    1.  You have to assign Forex GL's for the reconciliation accounts in OB09.
    2.  At the time of payment for incoming invoices, system can read the valuation differences and it will post to Realized Gain/Loss accounts and B/S adjustment account.
    3. You can consider this amount to issue bonus to your customers.
    Rgds
    Murali. N

  • Exchange rate difference posted to Group currency only during MIRO

    Hi SAP Gurus,
    We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
    OB22
    Crcy Type  30    Group currency                               Currency   USD
    Valuation        Legal Valuation
    ER Type    M     Standard translation at average rate
    Srce curr. 1     Translation taking transaction currency as a basis
    TrsDte typ 3     Translation date
    Please find below scenario:
    Co code currency: ZAR
    PO: ZAR
    Upon GR:
    Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
    Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
              credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
    Upon IR:
    Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
    Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
              credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
    automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
    Here are my questions:
    1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
    2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
    3.) How?
    I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
    Appreciate your help. Thanks!
    Regards
    Dru

    Just an update to this issue- I just found out that the system is pointing to KBS when posting the
    exchange rate difference in group currency upon IR, hence, PO account
    assignment is adopted. I'd like to rephrase my question- is there any
    way we can change SAP behaviour such that it will point to other
    transaction key (e.g. KDG) other than KDM? Bottomline is we want it
    charged to other GL account not the one in the PO.
    Thanks so much for your assistance.
    Regards,
    Dru

  • Exchange rate difference

    Hi everyone,
    I have one doubt As for Example......if im posting one Vendor invoice(FB60) in INR currency and i had selected GL (dr item) which is of EUR currency.in this case if i will maintain OBA1 currency rate differences then system will not give error?Is this true? Or it not possible to post invoice with diff currency line item.
    Thanks
    Deepa

    Hi,
    System will not allow you to post in different currency other than the account currency of the GL, if "Your account currency is different from the company code currency".
    Example:
    Company Code Currency: INR
    Document currency: INR
    GL Account Currency: EUR
    Result : Not possible to post, you can post the  document only in EUR
    Company Code Currency: EUR
    Document currency: INR
    GL Account Currency: EUR
    Result : Possible, because the Company Code currency is similar to account currency, even though the document currency is different system will allow you to post.
    For more : Please click on the below link for details on "Account Currency"
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/830e405c538f5ce10000000a155106/frameset.htm
    SKS

  • Exchange Rate Difference Posting

    Dear Gurus,
    I am facing atypical scenario in Production and development Clients.While clearing open items for a BanlK GL (USD Currency) in production there is no exchange differences being calculated by the syste.There is difference in Exchange rates between the original document and the clearing document.
    But for the same GL in Development I am getting Posting to Account maintained in KDB Key.
    I would like to know what can lead to difference in scenario that in one case system is calculating difference and posting and in the other case no.
    Please help.
    Regards
    Raju

    Dear All,
    Let me elaborate the scenarion in more deatil:
    We post Foreign Currency Invoice LIV--MIRO say rate is 41 USD/INR
    For payment F110 No Exg rate differences is selected in FBZP--So no Exchange Rate Difference is posted for payment.
    Now for clearing the bank Sub account Entry posted by APP user input LIV Exg rate in past and systen allowed to clear with no Exg rate Differ.This is OK.
    Now when user try to clear same account with same entry system is issue msg like No Exg Rate diss account maned.I tried to clear th GL document with both LIV and APP exchage rate its strange that is each case system expects Exchange rate diff account.
    I maintained in FBKP KDB in development client but then Exg Rate diff is getting posted which is not the requirement.
    Can any body please help.
    Regards
    Raju

Maybe you are looking for

  • ASUS Sonicmaster X102BA Win764bit - usb bugcode driver blue screen on sleep

    Hello I recently downgraded to windows 64 bit and when the PC goes to sleep it comes back up, freezes for about 15 seconds and then reboots with the BSOD error. I noticed in device manage its missing 2 drivers (SM Bus Controller and Universal Serial

  • Thunderbolt imac 2405fpw

    I just unboxed my new thunderbolt equipped i7 imac and now my external dell 2405fpw flashes DVI CANNOT DISPLAY THIS VIDEO MODE whenever the monitor is supposed to be asleep... it works fine otherwise... it's an irksome problem because the computer an

  • IPod 5g showing as iPod 3G in iTunes 7

    At first I couldn't get iTunes to recognize my iPod so I could restore it. I plugged it in to a iBook and was finally able to restore it. But now when I plug it in, it shows up as a 5G iPod on my desktop (with the nice 5G icon, but as a 3G iPod on my

  • Accessing RUN through java programming

    Sir, i need to develop a java application t access "run" in start menu.How can i access the run menu through java programming.?I want to run the program in the run command when we input command through the java program..please help me..if you have th

  • Detaching VHD Files using PowerShell

    Hi, Does anybody know of any PowerShell scripts which I can use which will detach a VHD file from multiple VM's? I have a few hundred VM's that I need to detach a VHD from so could really do with a script! Cheers Neil