Technical systems and Business systems in SAP XI

can any one tell me ,breifly explain the  diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?

Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen     Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
        Ajay Kumar

Similar Messages

  • Difference betweeen     Technical systems and Business systems

    Hi
    In a SLD we need to configure  technical systems and Business systems.. what is the exact difference between  Technical Systems and Business Systems..
    this question is asked an interview.. for this.. how can we explain..
    thanks
    babu

    Hi babu
    First I let u know with analogy and actual definition as below
    Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an  application server like ABAP AS or Java AS which is basically a technical system.
    Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
    Standalone Java systems
    Third-party systems
    Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
    The business systems in the System Landscape Directory relate to a system landscape.
    The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
    Reward point if it help u understand

  • SLD Configuration - Technical System and Business System

    Hello,
    I have installed SAP Solution Manager with local SLD and i want to use this system as Central SLD for my System Landscape. Later on i have installed other SAP Products like ECC,BI,PI etc.
    Some of the systems i registered with previously defined SLD in Solution Manager, but some system i forgot to register with SLD during installation.
    I am not sure or aware what is the difference between SLD configuration during installation and after installation.
    If i have Register the System during installation will it register automatically with SLD or we have to do manually.
    If i have not register system during installation and later on i want to register particular system with SLD what is procedure for that.
    Can some one share knowledge on What is Technical Systems and Business System in SLD Configuration, i tried to do some activity for SLD Configuration but after seeing above both terms i was confused so for time being i stopped this activity.
    Looking forward for kind response.
    Best Regards,
    V.Singh

    Hello
    try to go through these
    http://help.sap.com/saphelp_nwesrce/helpdata/en/45/4208934d7f1193e10000000a1553f7/content.htm
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414

  • Technical system and Business system

    Hi All
    I am new XI.
    Why we have WEB AS JAVA, WEB AS ABAP, THIRD PARTY  etc etc in Technical system and Business system  and when we will use that ?
    Thanks
    ss

    Hi,
    When we try to connect any other SAP R/3 system using XI, we need to create a business system in SLD.
    Similarly for third party and WEB AS Java systems.
    You will be using these in many scenarios.
    Go thro the link for more info.
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/frameset.htm
    Regards,
    P.Venkat

  • Logical system and business system

    Hi experts, please help me with the below questions---
    1) What is the diff between logical system and business system?
    2)what is the difference between logical system(defined in R/3) and business system (defined in SLD) in idoc to file scenario.
    3) Is it require to give the logical system name of the xi server(Which we define in idx1 port) to the 3rd party system(Application system at the FTP side) to carry out file to idoc scerario?

    Hi,
    Business System :
    1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
    2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
    Business Service:
    1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
    2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
    3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
    4.Business Service has no SLD Entries and No Assigned Products and SWCV's
    Regards
    Sangeetha

  • Creation of technical system and business system

    Hi Guys,
    Im just a beginner in SAP XI..I would like to know what will be the setup in my SLD .
    My data will be coming from MS SQL and will transfer it to SAP R/3.
    Is it true that I need to setup the Technical system , one for my Sender (data coming from sql ) and
    one for my Receiver (data will transfer to SAP R/3).
    about the Business system? do i need to create buss system for Sender and receiver?
    Please help.
    Thanks in advance.
    aVaDuDz

    Hi,
    you don't have to create technical system for R/3 you should better use tcode RZ70 for selfregistering:
    The specified item was not found.
    And for this technical system you should create also a business system.
    You should create a technical and business system for your MS SQL if it's inside of your system landscape.
    Here is a good explanation:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/43/01ea90ab24235de10000000a1553f7/frameset.htm
    Regards
    Patrick
    Edited by: Patrick Koehnen on Oct 2, 2008 10:26 AM

  • About ABAP Technical Systems and Business Systems

    Hi experts,
    I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
    In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
    I think that transport Directory  scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
    Regards
    Gonzalo

    This is what you need to do to move from Dev to QA.
    1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
    2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
    3. Now, create the QA Tech and Business Systems in the QA SLD
    4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
    Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
    5. Now if you import the ID  objects in QA , the business systems name will be renamed automatically.
    Regards
    Bhavesh

  • Technical Systems and Business Systems

    Hello Everybody!!!
    I have some doubts, can you help me, please???
    1) Technical Systems are application(software) systems, ok? They aren't hardware systems, ok?
    2) In my SLD I should have a SAP ECC system as a technical system and each of their clients as a bussiness system, ok?
    3) For third-party systems, where the client concept doesn't exist, I should have one technical system and only one business system for my third-party system, ok?
    thanks a lot
    Julio

    hi  julio ,
               ur view is correct  except in the technical system .
    1)   technical systems are the physically  located systems in which we can create only technical system for any physically  located system .
    2)   bussiness systems are logical  systems . according  to the type of technical  system we can  create the no of bussiness  systems .
       technical system of type W AS ABAP  we can create multiple business systems as there is the concept of clients .
       technical system of   third party   we can  not create more than  one business system  as there  is  no  matter  of  client .
    3)   so  for  every  third party  systems  only  one   business  system  will  be  there .   
    some  important  points :. 
        atleast  one   business  system  will  be  there  on   any   system .
    we  can   create   more  than  one   business   system  on  third  party systems .

  • How to decide no.Technical and Business Systems required for any senario

    Hi XI experts
         I am very new to XI but it is very interesting ....
         To develop any scenario how to decide Technical systems and Business
         Systems...
         For any scenario but how to decide the systems howmany to create ?
         I had a scenario like SOAP to RFC to SOAP ? For this how to decide?
         One more like FILES to BPM to JDBC ...like
         Can any one explain me for any scenario which may include SAP
         R/3,CRM,APO,BW,JDBC,SOAP,RFC...any system.
    Adv..thanks and points to all
    Kiranlvs

    Hi Kiran.
    Ok here I will try to answer your question.
    1) SOAP (Web Service) -> RFC (R/3) -> SOAP (Web Service)
    a) you will need to create a Business System for R/3.
    b) you will need to create a third party business system or a business service for the Web Service system.
    2) File (File System) -> XI -> JDBC (Database)
    a) you will need to create a third party business system or a business service for the File system.
    b) you will need to create a third party business system or a business service for the Database system.
    note: BPM is one of the functionality of XI so there is no need to create a BS or TS for it.
    3) CRM or APO or BW (SAp Systems) -> XI -> IDoc (R/3)
    a) Business System for CRM or APO or BW
    b) Business System for R/3.
    The bottom line is you need to create Business System for any SAP system that is part of you integration scenario or when you have to Idoc, RFC and Proxies.
    If the business system already exists for the SAP system then you just need to attach your SWCV or Product to that Business System.
    Regards,
    Ashish

  • Creation of Technical and Business Systems

    HI Experts,
    If I am having the one ECC, SAP 4.6C , Sap 4.7E, Mainframe , SQL Server systems,  to integrate  all these systems how we can maintain these in SLD.
    Please Explain how many Technical Systems and Business Systems for these systems.
    thax

    Hi Sridhar
    It is depend upon the type of the scenarios and your requirement.
    There are a few basics you need to understand to be able to answer this.
    1, Technical and Business Systems are of 3 types Java / ABAP and ThirdParty.
    2. When dealing with Java Proxies and Idocs/ ABAP Proxies, you need to create Technical and Business Systems corresponding to your SAP systems.
    3. For JDBC and SOAP etc, you can use a single Third Party Business System or , create multiple corresponding to each system you are integrtaing with you can use Business Service etc!
    there are no hard and fast rules for JDBC , SOAP adapters and it all depends on how you are architecturally strucutring your SLD and your entire Integration landscape.
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • Diff between Business System and Business Service

    What is the Difference b/w Business System and Business System and whne we use them?

    Hi,
    Business System : is a logical entity assigned to a Technical System in a SLD
    Business Service: is an Abstract entity without having assigned to a Technical System in a SLD
    for more:
    Business System: http://help.sap.com/saphelp_nw70/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm
    Business Service: http://help.sap.com/saphelp_nw70/helpdata/en/c7/301640033ae569e10000000a155106/content.htm
    Also,There is already lot of thread regarding the same discussion, please see it below.
    Business service or Business system??
    Re: Business Service <--> Business System
    Difference between Business service, Business system and Business process
    Business Service vs Business System in Integration Directory.
    Business Service (vs) Business System in Integration Directory.
    What is the difference between Business System and Business Service?
    business system and business service
    Diff b/w Business service & Business System?
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • SLD Export / import Technical and Business systems

    Dear all,
    I am new to SLD administration.
    We have task to update the local SLD on the Production PI system PPI ( Target ) with the business systems ZEC, ZSC from the Production Master SLD on Production solution manager system
    PSM ( source ) using Export/Import on the necessary technical and business systems.
    Please confirm whether i am following correct steps :
    Go to SLD Administration on PPI target system
    ALL Instances
    Instances by Class
    Model
    ( which one of this option need to be selected , please let me know  ?? )
    Go to SLD Administration on PSM source system.
    select Export button ->
    Select business systems one by one and perform Export which will create .ZIP file
    at local machine.
    Go to SLD Administration on PPI target system
    select Import button ->
    Select Export ZIP file which created in previous steps from PSM and provide location from desktop
    Start Import button ( only if you get Continue import option )
    Please let me know if above procedure is correct for business systems
    if yes then  what need to be done for Technical system ??...do they require Export/import also ?
    If yes when i go to technical system option i get Export option disabled...but same way when i go to
    business systems option i get Export button enable and able to perform the export.
    Do i need to only Export / Import business systems ?
    Plese help me.
    Regards,
    RR

    Manoj,
    It seems entries are added manually .... should we remove and run Import for the same ...
    or just try to overwrite .... in case of overwrite option ( as we have open OSS message ) SAP has suggested through OSS message that If you end up with problems when trying to overwrite, then the PPI SLD is broken and will have to be re-built because someone made a manual change to it and got the GUIDs out of synch with the master.
    I do not understand if target system PPI SLD gets broken during overwriting operation as mentioned by SAP ... whats is the way / steps / procedure to Re-build SLD .
    In rebuilt - process do i need to Import ( Export -> Export lines -> ALL ) the export backup created before start of this activity ? please let me know SLD rebuilt steps and about Remove - reimport issue.
    Appreciate you time on this. thanks in advance.

  • Technical and Business System

    Hi,
    I need to create a business system called ERT which is a sap R/3 system.
    As we are using XI 3.0, please do provide the steps.
    Moreover, once we create the technical and business system, how do we actually test it without running an scenario.
    Regards
    Krish

    Guys,
    I tried creating comparing with development environment.
    The only problem i am facing is that when we click technical system landscape, you have a parameter called system home.
    That one is highlighted in development environment whereas it is not in my environment.
    While giving some details, i dont know where to give the IP address of the technical system name.
    If some kind of weblog is there, would be really helpful.

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • XI Technical and Business System Definition For MDM 2.0

    Hi,
    We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
    In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
    Does anyone have any install scripts of what they did?
    Regards,
    Jerry Martinek

    You can set it as third party and it will work fine.  Because MDM isn't built on the wed application server like the majority of the netweaver apps, it's basically treated like a third party system as far as integration is concerned.  Hence you send and receive XML documents to PI and convert them into IDocs to send to R/3
    Check the beginning of this document on creating the business and technical systems for MDM
    /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario

Maybe you are looking for

  • Okay, I'm really starting to get pissed off. I've already dealt with this problem once.

    Photoshop is doing the same thing now that I had discussed in the previous thread. I just bought a new monitor, and now my Photoshop is all messed up. Just trying to save something I get an error saying there isn't enough RAM to do that. I have 12GB

  • Mini a1176 - 2.16ghz core 2 duo - second monitor

    hey all, recently picked up a used mini, core 2 duo @ 2.16ghz, model a1176 to replace my aging g5 and boy do i miss my second monitor. i have seen usb video cards and was wondering if anyone had any suggestions as to what to get and, how it will impa

  • MB mid 07 2,1 core 2 duo, 2g memory, plenty free space....

    Anyone else with Mac like mine try upgrading to 10.8.4? Any lagging? Noticeable absence of features? I have to spend 20 on Lion or Mountain lion either way.... Is it worth it?

  • Convert a date to MMDDYYYY

    I'm attempting to write a formula to convert a date field to an 8 digit string, which is later barcoded for a customer requirement.  If the month or day is <10 then it needs to be padded with a zero, so the overall result is always 8 digits. I though

  • Canon Pixma MG5250 scans and prints images wrongly stretched/contracted

    hi! i have a problem with my pixma 5250 which is an all in one. When i scan an image, what i get on my screen is an image with the correct width, but with a shorter height. see this image: i have tried two different programs to print, tried updating