Tecra S1 Hangs when installing XP

Hi,
I have a weird problem. My Tecra S1 'hangs' when installing a 'normal' Windows XP Pro (instead of using the 'image DVD). The installation works fine up till the last 9 minutes...then it 'hangs', and the laptop stops working. Only possible solution is then to take out the battery & cut the power. Had a (1 time) similar problem of 'hanging' when using the image DVD
Somebody who had this before ???
Thanks a lot for all your hints & tips...

Hej guys,
Thanks a lot for the suggestions, and indeed, I also tried other CD's of XP pro...all with the same result. At the last 9 seconds it hangs & the only thing I can do is take out the battery. Last thing I tried was installing a Win2000 pro & that works fine. Then I tried to upgrade that version, but again...it stopped at the last 9 seconds.... :-((, so perhaps indeed I have to look in the direction of the memory problem ???

Similar Messages

My iMac hangs when installing Yosemite.

My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

You can try using the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

NetBeans and j2sdk package hangs when installing

When installing the netbeans 3.6 and j2sdk package the installer get to 48 % and hangs. I let is sit all night and it was still the same the next morning. I am running on XP professional. Any ideas on how to get it to install.
Thanks
Randy

I was having a similar problem
I originally installed the combined package netbeans 5.5 with JDK 1.5.0.9 with no problems.
Unfortunately, I had to uninstall Netbeans, because the Nokia Carbide_j_1_5 integrated plug-in broke it. However, after uninstalling just Netbeans, I was unable to reinstall it !
The installer would report that the JDK was already installed and that it would just install Netbeans 5.5. At that point I clicked "next" to continue, but the installer just hung.
After many attempts, I finally found this thread, and decided to try downloading the installer for just Netbeans (netbeans-5_5-windows.exe)
Bingo! It installed fine. So now I can go home. What a way to spend a Friday night!

Hangs when installing comUS.msb

Hi, i have a copy of Oracle8i, personal edition version 8.1.5 - each time i try to install it, it hangs when trying to install file called "comUS.msb" which is 76% of way through installation.
Does anyone know of a work around to this? I tried cancelling the installation of that component and that only caused the installation to hang even further.
Hope someone can help!
Kind regards
Nick Hoare

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10
As a general guideline, please first search the forum to see if your question is already answered. You will find answers for the most frequently asked questions by simply searching the forum. This will help you to find the answer right away and will save time for all of us.

Root.sh hangs when installing instance 10g clusterware (10.2.0.1)

Hi,
root.sh scripts is hanging when installs 10g clusterware(10.2.0.1).
$./orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
$./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Hangs
Thanks,

There is a note available in Metalink.. 416100.1 Have a look at it..
This is symptom where there is a discrepency in the hostnames in CRS installation.

K8N Neo2-F hangs when installing Windows XP Pro

Hello, I've recently been trying to put together my first build, and I haven't had too much luck thus far.
My problem occurs when trying to clean install Windows XP Pro on my hard drives. Using either of my HDDs results in the Windows setup screen coming up, loading all the drivers, and then crapping out right before it lets me add/delete partitions. It hangs right before there, and provides me with a STOP 0x000007 BSOD error. I've tried with both my SATA and my IDE drives, and nothing seems to work. The IDE drive works fine on my old motherboard (Non SATA compatible, so I can't even test the SATA drive on it), and lets me partition the drive, so it's not the HD, and it's not the CD. The processor, mobo, SATA HD and the RAM are all new.
I've followed the guide that fafner and syar2003 have provided here, and have come up with nothing. (I only tried the first method, not the second one further down the thread).
Is there a BIOS setting that I'm missing, or what?
Thanks in advance.

Amps on the power supply are:
+3.3: 32A
+5: 40A
+12: 24A
I've tried installing windows with just the SATA drive, just the IDE, and both. I've now tried installing Windows using syar2003's advice in aforementioned thread, saw this link and tried setting the max memclock to 166Mhz, with 1 stick, or 2. Had the timings set to auto though. No dice.
No matter what, after it says "Setup is now starting Windows", it hangs, and after about 5 minutes, this BSOD comes up.

Bootcamp hangs when installing Windows 7 on Macbook Air

I purchased a new Macbook air less than 1 month ago. 256GB SSD drive, maximum RAM. It's running OS X Lion (10.7.1). I plugged in a USB DVD drive, keyboard, and mouse.
When trying to install Windows 7 64-bit Bootcamp Assistant creates the partition, creates the windows driver disk, then reboots to install windows from my retail version of Windows 7 Home Premium (DVD.) It hangs with the progress bar about 10% of the way across. The message "windows is loading files" is displayed. I waited a full 45 minutes but nothing changed. Help!

Look at your SSD. See if there is an issue, firmware update, etc.
not all SSDs work - some work in one OS and not the other, the Mac 2011s have been known to have issues with their SATA3 cable interface and chipset.
Apple and Intel and others have all issued fimrware updates.
In some cases people have just sent back their MBP because they were such problem, and that just running Mac OS, not even Windows.

Agent install hang When Install by using remote desktop

Hi All
My Customer has some workstation,that were placed on branch office,occur some problem and he want to re-install.
When he using remote desktop to login/install, ZCM Agent install service will hang on "novell-rm-md-core". he test some times and get the same result.
But he call another admin install agent locally. agent install successfully.
Who have the same experience about remote install by using remote desktop(mstsc) ??
thanks
wyldkao

Originally Posted by wyldkao
Hi All
My Customer has some workstation,that were placed on branch office,occur some problem and he want to re-install.
When he using remote desktop to login/install, ZCM Agent install service will hang on "novell-rm-md-core". he test some times and get the same result.
But he call another admin install agent locally. agent install successfully.
Who have the same experience about remote install by using remote desktop(mstsc) ??
thanks
wyldkao
Windows XP right?
Then you need to install this patch before installing ZCM agent: An application that installs a mirror driver over a Terminal Services session may stop responding on a Windows XP-based computer
Thomas

[915 Series] System hang when installed CoreCenter

After updated bios to version 1.7 and Core Center 2.0, my system hang after sometime running.
When uninstalled CoreCenter, no problem now.
If installed previous version Corecenter, it still hang.

Many people here will tell you to dump CoreCenter. I don't use CoreCenter either. You'll find many here use Speedfan or MBM5 to monitor their temps and voltages. MBM5 is no longer developed and won't support your mobo. Speedfan is still updated and you also can control fans with this utility. Are soft OC'g with CC? Software OC'g is not recommended, but if you do soft OC, Clockgen is better program for doing so. I wouldn't. OC'g using the bios is considered the better method.
Also, it's a good idea to read the stickies especially the one about posting. As stated in the post I linked to, please include information about your system. See that post and my signature as an example.

Why system hang when install GeforceFX 5200?

i am using the Asus A7V8X mainboard, Processor is the AlthonXP 1700+. Ram is Kingston 256 DDR 400.
before when i use the geforce 2mx is no problem and good at using in WinXP. But, nearly time i was buy the MSI - 128MB DDR GeforceFX 5200 8X Graphics Card and try install it. When i install the driver come with cd bundled, the system was hang even i try restart and try install again but the problem still exist. then, i was go to the MSI offical website to download the newest driver again and try install again oso cannot. I have already done all i can do is update the vga driver and install VIA 4in1 but the problem still exist here. izzit my mainboard cannot compatible with the GeforceFX graphics card ?
So, i have hope technican here can tell me what the problem is and how can solve this problem...
thx you .

Go to http://www.driverheaven.net and download "Driver Cleaner" Utility. follow the instructions on removing drivers from previous installs.
Do not use the MSI Drivers, go to nVidia's website directly for VGA Drivers.
Make sure you have the drivers downloaded to a directory prior to running driver cleaner so you can immediately install them afterwards.

Osx lion hangs when installing

Downloaded osx Lion yesterday and tried to install it on macbook pro 15" bought in Jan, and the progress bar hangs at the start and stayed all night without installation, although i have updated to the latest Snow Leopard etc...and followed all the steps before installation.
can somebody help please????

I have absolutely the same problem. upgrade with my iphone 3gs works perfect. and with the ipad 2 i have the same problems. I dont know what to do and hope someone can help

Mac Book Pro hangs when installing Security Update 2013-002 (ver 1.0) on Lion 10.7.5

I am running Lion 10.7.5 on a 13" MacBook Pro (late 2011) with the latest software updates and everything has been working perfectly.
Last night I tried to do a Software Update and it said there is a Security Update 2013-002 (ver 1.0) recommended. I installed it and the progress bar went to about 50% and then stopped. I waited more than 2 hours and the mac locked up. Had to do a hard reboot. Tried to install this Security update again after rebooting. The mac froze again (spinning wheel).
Any ideas?

OK. Let's try running the computer in Safe Mode then a normal restart. The initial startup into safe mode will take some time so be patient. A progress bar will eventually appear then disappear. Once safe mode is complete you will see a login window. Login with the desired account and password. Wait for the startup to fully complete before restarting. The point here is to clear some caches and other files that may become corrupted.
If you happen to own a utility such as Mountain Lion Cache Cleaner I would use it to clear out all the user, system, and font caches. An immediate restart is needed upon completion. At least this way we can rule out corrupted caches.
Meanwhile you can check out:
Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
For emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.

[SOLVED] pacman hanged when install or remove packages

when I use pacman -S , it only shows "resolving dependencies...". If I use pacman -R , it hangs at "checking dependencies..."
I have tried to overwrit the programme with extracted the package manually, it didn't help me.How can I resolve the problem
Last edited by nyfair (2008-03-25 14:16:21)

sudo pacman -S pacman --debug
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: new section 'testing'
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: registering sync database 'testing'
debug: opening database 'testing'
debug: opening database from path '/var/lib/pacman/sync/testing/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'testing': protocol 'ftp', server 'mirror.pacific.net.au', path '/linux/archlinux/testing/os/x86_64'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'core'
debug: registering sync database 'core'
debug: opening database 'core'
debug: opening database from path '/var/lib/pacman/sync/core/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'core': protocol 'ftp', server 'mirror.pacific.net.au', path '/linux/archlinux/core/os/x86_64'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: opening database 'extra'
debug: opening database from path '/var/lib/pacman/sync/extra/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'extra': protocol 'ftp', server 'mirror.pacific.net.au', path '/linux/archlinux/extra/os/x86_64'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: opening database 'community'
debug: opening database from path '/var/lib/pacman/sync/community/'
debug: config: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server to database 'community': protocol 'ftp', server 'mirror.pacific.net.au', path '/linux/archlinux/community/os/x86_64'
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.conf
debug: registering local database
debug: opening database 'local'
debug: opening database from path '/var/lib/pacman/local/'
debug: loading package cache for repository 'testing'
debug: loading package cache for repository 'core'
debug: loading package cache for repository 'local'
warning: pacman-3.1.3-1 is up to date -- reinstalling
debug: package 'pacman' not found in sync
debug: adding target 'pacman' to the transaction set
resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package pacman-3.1.3-1
then the programme hanged
after I press ctrl+c, it shows
debug: returning error 29 from alpm_trans_interrupt : operation not compatible with the transaction type
debug: closing database 'local'
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: closing database 'testing'
debug: unregistering database 'testing'
debug: freeing package cache for repository 'testing'
debug: closing database 'core'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: closing database 'extra'
debug: unregistering database 'extra'
debug: closing database 'community'
debug: unregistering database 'community'

Hangs when installing amd and silicon image drivers

last night installed multipoint server 2012 premium evaluation to a 32GB ssd.
all went well.
then attempted to install amd graphics drivers for hd4850/hd6310 and also drivers for silicon image 3114 pci sata card.
both installers hang part way into installation despite multiple attempts and reboots.
even leaving pc over night failed to resolve hanging.
please advise of work around.
mainboard is asus e35m1-m pro.
objective is working fileserver/multiseat websurfer.
thanks and please have a great day/week/life

Are those devices supported by Windows 2012 or are you installing drivers for an older version of Windows? If those drivers are for older versions of Windows, that might cause the problem. Have you checked with the manufacturer of those devices for known
issues?

G5 downloads but hangs when installing, why?

Picked up a powermac G5 Duel 2.0 processors, 160 hard drive, 2 gigs memory and loaded with OS 10.5 to id screen. Finished installing and ran apple update. The combined update was downloaded and then clicked to install the update. The computer rebooted to a blue screen and seemed to start to install but stopped responding. The command+option+escape keys did not have any effect. Had to hold the power button to shut it down. It then restarted again. I ran disk utility and found one error and ran repair. Still will not install the update to 10.5.8. I assume that G5 will update to 10.5.8. I installed other programs and they updated just fine. Seem the OS is not updating. What could be the problem, assuming the update is supposed to be installed? Thanks

Hello, yes, G5s can handle 10.5.8
Did you use Software Update, or get it directly?
1058 Combo Update, 10.5.8...
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Directly is usually better & Ethernet more reliable than Airport/Wifi

Tecra S1 Hangs when installing XP

Similar Messages

Maybe you are looking for