Tecra S5-14R: Toshiba Flash Cards stops working: Runtime Error R6025

Hi all.
Hardware: Toshiba Tecra S5-14R
I have a problem with Toshiba Flash Cards software.
When it starts I've received an error "R6025 - pure virtual function call", and then the microsoft alert that Toshiba Flash Cards software stopped working
I'm using Windows Vista Business 32 bit OS, and I've downloaded new version of Toshiba Flash Cards software (v.2.00.05), but it doesn't solve the problem.
Could somebody help?

Hi
It seems that this error is known to the Microsoft support people and therefore they have published a knowledge base article.
Such error appears also if you would run the software Microsoft Money.
Please try the steps described here:
[Runtime Error: "R6025 -Pure virtual function call"|http://support.microsoft.com/kb/240437]
I would recommend doing this:
1. Disable the Flash cards
2. Click Start, type cmd in the Start Search box, and then press ENTER.
3. At the command prompt, type the following lines one at a time, and then press ENTER after each line:
- regsvr32 softpub.dll
- regsvr32 wintrust.dll
- regsvr32 initpki.dll
- regsvr32 dssenh.dll
- regsvr32 rsaenh.dll
- regsvr32 cryptdlg.dll
- regsvr32 gpkcsp.dll
- regsvr32 sccbase.dll
- regsvr32 slbcsp.dll
4. Enable the Flash Card Utility again

Similar Messages

  • Satellite L550 - Flash Cards stopped working after Windows 7 64bit repair

    I tried installing/reinstalling/uninstalling and then installing again, Toshiba Value Added Package and flash cards support utility. No luck...
    Flash cards utility is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
    What now? :)
    Laptop model: L550-15F (PSLN4E)
    Also, does anyone know why a search for drivers for my model returns bluetooth stack package but my model doesn't seem to have bluetooth? :)

    Hi
    Wait a moment, please! In which order you have installed/reinstalled the Value Added Package and Flash Cards Support Utility? It would be interesting to know what you have done exactly.
    I have used the following repair order for this problem:
    I uninstalled Flash Cards Support Utility and then Value Added Package. I did make a restart and cleaned the system by using CCleaner. One restart more and I installed Value Added Package firstly and then Flash Cards Support Utility. Now I did make the last restart and the FN keys started to work!
    Its important that you install the new versions for Windows 7!
    That means Flash Cards Support Utility version 1.63.0.4 and VAP version 1.2.34_64. I founded both on the Toshiba website :)

  • Portege R500 - Toshiba Flashcard has stopped working

    Hi,
    I keep getting this "Toshiba Flashcard has stopped working and will closed down" error when I start up my Portege R500 laptop.
    What is causing this?
    I'm running in Vista and my PC continues to work even though it does this.
    Cheers,
    Elty

    Hi
    Its not easy to say what causes this issue.
    In most cases some other software parts could affect the functionality of different applications.
    For example my flash card stopped working after Vista has ran some updates.
    I have simply removed the old VAP (value added package) from the system.
    I cleaned registry and system using the CCleaner (free tool) and then reinstalled the VAP again.
    Now everything is running properly.
    I think you should try the same too.
    Remove the VAP and install the new VAP downloaded from the Toshiba European driver page.
    Check it out!

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • Toshiba flash card not responding

    I have had my laptop for several years and lately I've been frequently getting the pop-up message 'Toshiba flash card not responding'. It's almost impossible to click away this message. I think there's a relationship between this and the fact that Internet Explorer is slow to start up and sometimes stops running for no good reason when I am online.
    How do I fix this?

    the toshiba flash cards are the cards that appear at the top of your screen when you rollover it or when you perform a function using the FN button and any of the F keys them not functioning will not cause any problem with your internet explorer but whatever caused the Toshiba flash cards to not work might be making your IE not work

  • Satellite A - LAN card stopped working

    I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
    Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

    Hi!
    Which Satellite notebook do you have exactly?
    Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
    Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

    When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
    I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3.  I want to sych with iTunes but clearly must upgrade to >10.1
    When I do, my network card no longer works on my desktop.  Please HELP!
    My spec is;
    NETWORK CARD;

    polydorus wrote:
    This isn't my thing, but the following post on this seems to have helped some people:
    http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
    That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

  • 32g sd card stopped working ,is there an answer to correctig problem ?

    32g sd card stopped working , is there an answer to correcting problem ?

    take it out and put it back in
    reformat it
    have you tried it in a pc with card reader?
    buy a new card?

  • Adobe Flash Will Stop Working After Advertisements In Middle Of Video

    I have tried uninstalling and reinstalling the new version (11.3.300.268) of Adobe Flash, along with restarting my computer, and using Firefox, Internet Explorer, and Google Chrome.
    My OS: Windows 7 (64-Bit)
    My flash works fine for streaming on CTV as well as Youtube. I continue to have problems using global and slice video centres.
    On Firefox, Internet Explorer, and Google Chrome - video was able to load, watching the first 10 min of any video and once an advertisement during the video plays (like a commercial), video will go black and stay that way.
    Now on Firefox, when I press play to watch a video on global or slice video will freeze my whole computer for 30 seconds to approximately 1 minute and then turn into a grey screen and show a message saying adobe has crashed. I have sent a crash report on that multiple times.
    It was working fine a few days ago. Not sure if I had updated something which caused Adobe Flash to stop working. Would like to know how to fix it.

    This seems like a problem with Flash. Have you contacted Adobe about this?

  • Adobe flash player stopped working properly please help

    i'm using adobe flash player version10.0.32.18 on vista, and everytime i open my facebook application, i often encountered adobe flash player stopped working properly, then the page will recover, then after few minutes it will stopped then recover again. please someone help me how to solve this problem.

    Hi, Thanks. Your Flash Player files and the SWO(if it is vs 10.0.45.2) are correct. Are you having problems on other sites
    or just that one? Are you getting a message that is different than "you need to update your Flash Player?"
    Many times it is the websites or if you are getting this from a game, then that can be causing the problem. I haven't been
    able to determine if the websites that have NOT updated to support the latest Flash Player are just putting out a generic
    message or not.  You might want to check with the site to see if they support FP vs 10.0.45.2.
    You may have an add on that is conflicting also, it is hard to tell. Some anti-virus programs have add ons that may conflict.
    Since several users are having problems with Facebook, Farmville, Zynga, etc. my opinion is that it is not your computer.
    One that posted here is waiting on a reply.
    Thanks,
    eidnolb

  • Sdhc cards stopped working with 10.9.1 update

    sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

    Have you checked for an update and/or asked the developer for help?

  • 10.7.5 update caused Flash to stop working!

    I updated to OSX 10.7.5 today and now Flash has stopped working.  I tried updating flash on Adobe's website and still nothing.  Anyone else run into a similar problem?

    Have you tried completely uninstalling it first, using the Adobe Flash Player Install Manager in the Utilities folder, and then re-installing anew: http://get.adobe.com/flashplayer/

  • After Software Update 2007-004 airport card stopped working after wakeup

    Hi,
    I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
    Does anyone have a similar problem? Any work arounds?
    Thanks in advance.
    Also following is the logs from Software Update. Looks suspicious:
    Mac OS X Version 10.3.9 (Build 7W98)
    2007-04-28 18:56:03 -0400
    2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
    WirelessScan timeout waiting for first scan result
    WirelessScan timeout waiting for first scan result

    Deleting AppleAirPort2.kext solved the problem for some...
    http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
    While others had to rollback the AppleAirPort.kext to version...
    http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
    Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

  • 5233 Memory card stopped working!

    Hi,
    I've had this phone for almost a year, it's good but there have been few problems.
    I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
    56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
    Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
    3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
    Please help all my data is on memory card.
    Regards
    Solved!
    Go to Solution.

    Hi mtank,
    Thanks for your post.
    If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

    My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

    Is there an error message? What is the exact wording of that message?
    Remove the sim, clean the contacts, reseat the sim.
    Go to your wireless provider and get a new sim.
    Make an appointment at your local Apple store to have the iPhone evaluated.
         http://www.apple.com/retail/geniusbar/

Maybe you are looking for