Telephone Number field when adding a new User - CCM 4.2.1
Is their a way to automatically populate the telephone number field for a user? BAT does not allow this field to be added to the spreadsheet (phones-users). Thanks.
BAT Version: 5.2.1
The DN is for the actual line number of the IP phone, not the telephone number field which is stored with the User infromation. These can be independent; for example, I might make a user's actual DN 40001, but want the telephone number in the CallManager Corp Directory to be 5179840001. So, I can place the E.164 number in the Telephone Number field under the User page in CCM. Then, when a user looks up the number using the Directories button on the IP phone, the full E.164 number shows up for that particular user search instead of the 5-digit number which is helpful for offnet dialing and overlapping dial plans among remote sites.
So, I am looking for a way to automactically populate the Telephone Number field for each user (not the line number of an actual IP phone).
Thanks.
Similar Messages
-
"Email address is invalid" when adding a new user to BPC 7.0
Hello Experts,
I was adding a user with an apostrophe in his email (like "John.O'Hara (at) mycompany.com") and BPC didn't like that character with "Invalid email address" message. I've removed an apostrophe, added user and then modified email address directly in the tblUsers table.
Here is the question:
Is it possible that apostrophe would pop-up as an error later on in other modules of the application?
Thanks,
Akim
P.S. I can't modify user via Admin Console if apostrophe is in the email address... And it doesn't display user details when I click on that user name.
Edited by: Akim Zubarchuk on Nov 24, 2010 7:02 PM
Edited by: Akim Zubarchuk on Nov 24, 2010 7:11 PMSAP BPC doesn't allow you to use some chars insight of ID of users or dimensions members because it can cause some errors later on. I don't advice you to force the insert direct into table because later on you can have problems.
I will provide just an example:
Single quote is used to delimitate strings into SQL Server.
So oifyou used insight of ID you can arrive in the situation where the system will perform a select like:
select * from table where userid ='John O'Hara'
The result willbe that actually no users meet this criteria.
This will happen because actually the condition will be just: userid = 'John O' the rest will be truncate.
So the BPC doesn't allow you to insert some chars into ID or other field just to avoid errors like into my example.
Kind Regards
Sorin Radulescu -
When create a new user into AD by default permissions also added for share point site
HI
i have a sharepoint farm.
when i create new user in AD, by default below permissions are added to that user,
how its happen ?
site permissions:
View Web Analytics Data
Browse Directories - Enumerate files and folders in a Web site using SharePoint Designer
and Web DAV interfaces.
View Pages - View pages in a Web site.
Enumerate Permissions - Enumerate permissions on the Web site, list, folder, document, or
list item.
List permissions:
View Items - View items in lists and documents in document libraries.
Open Items
View Versions - View past versions of a list item or document.
View Application Pages - View forms, views, and application pages. Enumerate lists.
Use Remote Interfaces
adilHi
yes i dont know how these permissions are added in sharepoint?
how its happen? , even i did not added this user in any sharepoint group or sitepermission
adil -
Not able to see Metadata fields when adding the fields to the rule in UCM
Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.
Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant. -
How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice
Hi,
Kindly solve, How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice.
Regards,
Rajeev.Follow this step..
1. In SQL Server, go to the SAP B1 Database you're using.
2. then on the Object Explorer , go to Database Folder, explode the SAP DB->Programmability->Stored Procedures->SBO_SP_TransactionNotification * the only Stored Procedure that is allowed to be edited. Just right click and modify
3. Try to paste this -> and click F5
If
@object_type ='13' and @transaction_type in ('A','U')
Begin
If EXISTS
select DocEntry from ONIV
Where DocEntry = @list_of_cols_val_tab_del
and SlpCode<>'-1'
Begin
set @error_message = 'Please select the Sales Employee'
set @error = 1
END
END
Regards
Kennedy -
How to display all authentication providers when creating a new user?
I have configured active Directory with weblogic 10.3.1. Users and groups display correctly under the users and groups tab. When creating a new user only the defaultauthenticator provider is displayed in the drop-down selection. How do I get my active directory authenticator to display here also for selection?
I'm confident that the Active Directory provider is read-only. You could write your own Authentication Provider for AD that supports create/update/delete functionality, but it is not included in the out of the box AD Authentication Provider to my knowledge.
I know both the Default Authenticator and the database authenticator are read/write. -
Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?
Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts. -
How do I get the location area to work when adding a new event? The location area will not allow me to enter information.
How do we find a remedy?
-
when adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?
View Menu -> Sort Photos...
-
Mms message comes up on my iPhone saying I need to enter my telephone number. When I try to submit after entering I receive a msg saying I cannot save my tel. Number. Why?
Hi,
Do you have iTunes 11 on your imac? What OS X do you have?
Jim -
Logical standby issue after adding a new user at production db server
Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
AchyotPlease let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu -
When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!
I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension. -
Default value in field when creating a new vendor (Transaction: XK01)
Hi, everybody!
Is it possible to set a default value to a field when creating a new vendor (transaction: XK01)?
We need the field "Payment terms" in "Payment transactions accounting" tab and field "Terms of payment" in "Purchasing data" tab to be filled with a default value when creating a new vendor.
Thanks in advance
Best regards,
J MadariagaYou can try creating a transaction varient fron SHD0 for this which will default the requiredd values .
-Hari. -
When adding a new OU container to User Profile Sync the users does not get synchronized
We have an OU that users on leave are located. These users would "fall out" of sharepoint when moved to this OU, so I went in the sync and ticked on that that OU to be synced as well.
When running a new sync after this change, it only syncs one user, although the OU has about 30 users there. Same result if I do a full sync or an incremental sync.
Any help would be greatly appreciated.Double check that the user really is being synced. The most common issue is caused by user error when people think a user is being synced but is not.
Once you've validated that the user in the OU really is being updated in SharePoint you should check your synchronisation connection rules. Identify which filters you have set and check one of the non-importing users in the OU. Check each and every one of
those filters to try to identify which is causing them to be removed.
Finally you can also check the MIIS client which sometimes gives more information about why users are or are not being imported. -
CRM 2013 error when adding a new appointment in Outlook.
When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
> at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
> at System.Globalization.CultureInfo..ctor(Int32 culture)
> at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
> at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
Maybe you are looking for
-
Certificate validation when server is the same machine as client
Hi guys i realize this is the most talked question about jsse, the validation of local certificates. I found a 2001 o'reilly page where they explain what is jsse and gives a complete tutorial of it. It comes with a sample secure http server and brows
-
*Connection problems Sap A Java Application*
Hi Gurus, I have a problem. I'm riding the part of the JCO SERVER for SAP from sending information to a Java application. I created the RFC destination of the type TCP / IP and I have registered my JAVA application in the visual administrator. This a
-
i downloaded the book. have it visible on my laptop at home... I donwloaed Adobe Digital on my work PC and now how do I get the book from my private PC to work Laptop? I watched stuff at youtube read things... nothing works... Thanks for useful comme
-
No Authority....
I bought an external hard drive (Seagate 3TB) and to mymacbook pro it works without problems. But to my newly purchased imac (OS Lions) so it would not give me permission to read, write to my hard drive. What's wrong and what should I do?
-
X-file with db function returning a rowtype to forms. Positional binding?
How to explain this ... First things first: Forms [32 bits] Versión 11.1.2.1.0 (Producción) Oracle Database 11g Release 11.2.0.3.0 - 64bit Production Now the db testcase: I've got two schemas, quite similar, SCHEMA_A and SCHEMA_B Imagine the same tab