Telnet from Windows PC is very slow to Solaris x86, after Net linked

(Sorry about the re-post. I posted in the wrong group earlier)
I got the following info from this forum, in regards to configuring my Solaris x86 to link to the Net:
# echo 192.168.0.1 > /etc/defaultrouter
# route add default 192.168.0.1
# echo nameserver 192.168.0.1 >> /etc/resolv.conf
# cp /etc/nsswitch.dns /etc/nsswitch.conf
So I did the above steps, reboot the Solaris, and my Solaris system can link to the Net fine afterwards. But ever since it had Net access, another problem is created.
Whenever I telnet using a command line from a Windows XP computer, it takes a long time to telnet to this Solaris system. Before, I would see the Solaris login prompt for telnet in a few seconds. Now, it's about 1 minute. Plus, if I try to use an xterminal software from that PC to link to the Solaris x86, it hangs.
So after I undo all the 4 commands above, reboot the Solaris computer, all these problems disappear. I can telnet from my Windows PC to this Solaris system very quickly. However, I no longer have Internet access from my Solaris.
Anyone knows how I can fix this problem? Thanks.

It sounds like a name resolution issue. Can you post the contents of your /etc/nsswitch.conf file for us?

Similar Messages

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Since download of Firefox Hello desktop & laptop both on Windows 7 are very slow even after refresh, download history removed and anti virus software turned off

Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?

Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?

The first time I start Firefox it is very slow coming up but after it is up and I want another window it fast again. What do I need to do to clean out whatever is clogging it up.

Question
The first time I start Firefox it is very slow coming up but after it is up and I want another window it fast again. What do I need to do to clean out whatever is clogging it up. edit

* The first time you start up any application after turning on your computer is called a cold start, which is why Firefox takes a while to load right away. (I've noticed that future versions of Firefox start up faster on a cold start then Firefox 5.0.1.) Also, a lower amount of RAM could be slowing its start-up down since Firefox is kind of memory hungry.
* As for the second part of your question, press ctrl,Alt, and the delete keys on your keyboard. The Windows Task Manager should start. Go to the processes tab and look for 'firefox.exe'. Right click on the firefox.exe and click 'End Process'. Hit Yes and wait for a minute.
* Then opening Firefox again.
Hopefully this helped somewhat!

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

My mac has become very slow and crashes frequently after installing Lion

My mac has become very slow and crashes frequently after installing Lion. I have a 4 GB DDR3 ram and 2.4 GHz Processor. The Mac was running just fine on Snow Leopard. Has anyone else faced this issue?
Any suggestions on how to solve it?
Thank you
Kimberly M. Noronha

I refer you to the TM expert
http://web.me.com/pondini/Time_Machine/14.html
As a extra precaution I would copy the user file folders of Music, Documents, Pictures etc to another external drive and disconnect, just in case.
Always maintain TWO backups of your data at all times, since your messing with one, you need another until your back at two again.

Windows 2008 R2 Very Slow to Boot from SAN

I have installed Windows 2008 R2 on a blade in a boot from SAN configuration. I loaded the Cisco Palo FCOE drivers during the install and it went through without a hitch.
After the install the reboots are painfully slow, like 15 minutes. After boot up performance is great and there are no issues. I have tried changing the FC Adpater Policy from Windows to default and even to VMware but it doesn't make a difference.
Anyone know if there is a solution to this slow boot time?
by the way I have an ESX 4 blade running with boot from SAN and it boots normally.
I have checked FC zoneing and Navisphere and can't figure out why it takes so long to boot.

I had to open a case with TAC.. Bug ID CSCtg01880 is the issue.. a summary below. Fix is end of May.
Symptom:
SAN Boot using Palo CNA for Window2008 takes 15~30 minutes everytime it boot.
Conditions:
This is due to incorrect bit set in FC frame.
Workaround:
User need to wait longer for OS to come up. Once OS comes up there will be no service impact.

Windows 8 + T61 very slow usb

Thinkpad T61 6464-CTO
Windows 8
Bios 2.29
Embeded Controller 1.08
Hi
I have a strange problem. USB 2.0 is very slow, if I copy from T61 to usb stick or usb hdd my copy speed is 13-15MByte /s under Windows XP I hade 28 29 MByte/s
If I download a file or copy big files to my usb HDD I only reach a speed of 15MByte / s
what can be the reason?
Do I need Bios upgrade?
Solved!
Go to Solution.

Hello,
I believe the upgrade assistance for Windows 8 will notify you of incompatible applications during the upgrade process.
You could also download Lenovo's ThinkVantage System Update application and run it afterwards, just to see if it does detect any drivers or ThinkVantage software updates (as unlikely as that sounds for this generation of computer).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows Migration Assistant very slow via ethernet cable but after 36 hours .......

I am using Windows Migration Assistant to migrate from my 3 year old HP laptop running Windows 8 to a brand new iMac using an ethernet cable..
The pairing went well but, after 36 hours the laptop tells me there are 13 hors to go and iMac says 8 hours +. What am I doing wrong?

Welcome to Apple Support Communities
Wi-Fi and Ethernet are very slow ways and I don't recommend to use them unless you have to transfer small sizes. If they are big, don't use it.
What you can do is to make a Time Machine backup on your old hard drive, so get an external drive to do it. See > http://support.apple.com/kb/HT1427
After making the backup, connect the external drive to your new iMac and use Migration Assistant to restore your files. If you haven't set up your iMac yet, Setup Assistant will ask you to restore the backup.
You have to restart both iMacs before doing this, so migration will be stopped

Mac Book Pro 15" mid 2009 after installing new hard drive and 8 gb memory, start up disk is still full, start up from power off is very slow, and programs open immediately after start up EX. word, excel. Help?

I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb.
My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel.
New TB drive shows up alng with 8 GB but, new hard drive not updating somehere? What am I missing? See screenshots below

Thanks for the response, but I'm looking for answers to a few of the other answers before I look at completeing the steps above.
1. Whyis the new TB drive recognized in image 1 but still have the original 256GB size still recognized(and almost full) in image 1 also? The HD should now be 1 TB, not 256 correct? If this were the case, the HD, would only be fraction of full capacity, Where is the disconnect between reconizing the installed tb HD but, it not being used?
2.Image Number 2 shows once again that the new tb internal HD is recognized. However, in image 3, the HD 256GB drive is still shown underneath the new HD. Does this show that I am misssing something, some step, related to confirming the new HD should be fully reconized instaed of this old 256 that still remains?
3. In image 4, the SATA heading, shows the TB hardrive, However, in image 5, the 256GB drive is still being shown under the storage heading? Once again, seems like I've missed some simple step to make this all the same?
4.Why is the start up from boot up soooo slow now. I was never even close to this slow(slower than PC startup slow) before the new HD was installed. IS this common when updraging to a new HD? Doesn't seem right?
5. Why now all of a sudden when the computer finally boots up are certain programs automatically opening up, word, excel, when they have never opened up like this before?
Summary: 1. New memory issues, 2. Very slow start up, 3. Programs opening up automatically at startup.
Until I address these issues, I'm not going to worry about loking through and deleting heavy folders.
All responses welcomed!

Mini HP laptop running on Windows 7 - runs very slow

I have a mini HP Laptop. It runs VERY slow and when I am typing, the buffer is WAY behind me. Also, when trying to view videos online - eg. You Tube, everything is in slow motion or freezes. Same with Skype and Facebook. Slower than the old dial up internet!!!!
The operating system is Windows 7 which came loaded with the laptop.

Hello Seachange51,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your notebook is functioning very slowly, and I would be happy to guide you towards a resolution! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
In the meantime, I recommend following this document on Improving System Performance without Adding Memory (Windows 7). This should help improve the speed and efficiency of your notebook.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

Wireless very slow and/or unstable after Kernel update to 3.13

I have a "fresh" install from 2 weeks ago. It was installed with Kernel 3.12. I have a rtl8192cu, it was dreadful, so as recommended I installed dkms-8192cu and everything was perfect.
After the upgrade to Kernel 3.13, both with the standard driver and with dkms-8192cu my connection is very slow or unstable.
As an example, in theory I have 20m, with 3.12 I was around 14m. With 3.13 I am around 1m or less, I can barely update my system because:
error: failed retrieving file 's-nail-14.6.1-1-x86_64.pkg.tar.xz' from archlinux.polymorf.fr : Operation too slow. Less than 1 bytes/sec transferred the last 10 seconds
Wired everything goes fine.
I cannot downgrade to 3.12 because I need the new radeonsi improvements done with 3.13. I have this computer mostly to play Dota2.

Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package.

Very slow MV fast refresh after "Merge" on dimension

Hi,
We have a sales cube with 300Mio records and product dimension with 20.000 records.
We have a materialized view something like:
SELECT      COUNT(*) AS cnt,
     COUNT(cube.amount) AS cnt_amt,
     sum(cube.AMOUNT) as amount,
p.product_name
FROM sales_cube cube
JOIN product_dimension p on cube.product_dimension = p.product_dimension
group by day, product_dimension
There is tho mv_log on cube and on product_dimension defined.
After import process for sales_cube
In the night we run an product dimension update script implemented wit MERGE.
If something changes in product dimension then next fast refresh from materialized view takes 4 hours. If we have no changes in product_dimension then fast refresh takes 8 seconds.
My question is, why takes it sooo long and who can we prevent it.

I'm not authorized to publish EXECUTION PLAN or schema details.
But I found the problem.
ETL Prozess is generated by Warehouse Builder.
ETL Prozess is modeled as Mapping from product table to product dimension in Warehouse as "UPDATE/INSERT" by PK (product number).
Warehouse Builder generates an MERGE statement for such "UPDATE/INSERT" mappings.
But this mapping updates every record in Dimension Table, as result Materialized View Log for this dimension is confused. Fast refresh (join between fact table and dimension) is very slow (slower than compleate refresh).
Now, i simple must find out how i can change this OWB mapping not to update records in dimension if corresponding records are not modified in source table.
There is an "match by constraint" option in mapping, looks useful, i'll try it tomorow.

C++ Dependencies Generation is Very Slow in Solaris 10..

Hi
We are also having Slow make dependencies problem. It is taking more than 24 hrs to make dependencies in SOLARIS 10.
OS : SOLARIS 10
C++ COmpiler: Sun Studio 10: C++ 5.7 Compiler
It is very slow when it comes to generating dependencies using 'makedepend'....
Looking for your great help...
thanks
chakra

Hello,
Currently I'm trying to use the CC -xM compiler option to generate dependency info for source files.
By default I think that the -xM option assumes that all the object files are in the same directory as the output file
Suppose if the object files are in a different directory than the source files then how does the -xM recoginize it??
Because when I give in my makefiel as given below, depend option works fine.
$(OBJS):%.o:%.cxx
$(CXX) -xM1 $(CFLAGS) $< > $*.P
$(CXX) $(CFLAGS) $(@F:.o=.cxx) -o $@
-include $(SRCS:.cxx=.P)
But when the object files are in a different directory as given below it does not work properly.
$(OBJS):$(OUTPUT_DIR)/%.o:%.cxx
$(CXX) -xM1 $(CFLAGS) $< > $(OUTPUT_DIR)/$*.P
$(CXX) $(CFLAGS) $(@F:.o=.cxx) -o $@
-include $(SRCS:%.cxx=$(OUTPUT_DIR)/%.P)
From what I found when -xM1 ouputs info it assumes that alll the object files are in the same directory as the source files.
When I give a "make" in the source directory it displays like this.
CEventQueue.o : CEventQueue.cxx
CEventQueue.o : CEventQueue.h
CEventQueue.o : ../../pdfcore/src//CCoQueueService.h
CEventQueue.o : ../../pdfcore/src//CCoPthreadObj.h
CEventQueue.o : ../../pdfcommon/src//CPdfObject.h
CEventQueue.o : ../../pdfcommon/src//CPdfTrace.h
CEventQueue.o : ../../pdfcommon/src//CPdfException.h
CEventQueue.o : ../../pdfcommon/src//PdfType.h
But actually it should refer the .o's like this.
../../build/CEventQueue.o : CEventQueue.cxx where ../../build is the OUTPUT_DIR.
I found that there is no CC compiler option for adding prefix to object files.
Could you tell me what to do now.??All the makefiles in our project create the .o files in a seperate directory other than the source directory.
Thanks in advance,
GA

Telnet from Windows PC is very slow to Solaris x86, after Net linked

Similar Messages

Maybe you are looking for