TEM Web Dynpro problem

Hi All,
We have the ESS 2004 installed and patched to SP14. We are currently using the TEM apps only. When creating an Expense Report, credit card receipts are selected from the buffer which is then transfered to the expenses table. What we noticed is that the selected receipts are not transfered but other receipts which are not selected. any ideas?
Thanks in advance,
Raj

Similar Messages

Web Dynpro Problem

Hi,
I am new to the World of Web Dynpro in Java. I have developed a small Web Dynpro Application to access ABAP R/3 Backend. I have to check connection parameters for the used SLD, which are defined in the J2EE Visual Administrator.. Kindly tell me where is the J2EE Visual Administrator located.. How to check those parameters?
Thank You.
Regards,
Dhana

Hi,
Have a look at this threads,
Visual Administrator / Netweaver
Visual administrator
Regards,
Saravanan K

Deploying problem of web dynpro java application

Hi,
I have a web dynpro java application with no problem about deploying.
I copied this application with another name.
I tryed new application to deploy but sdm aborted with error.
Error
19.Tem.2011 10:22:25 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : vserver0202
SDM port : 52018
URL to deploy : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
Result
=> deployment aborted : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
Aborted: development component 'HF_PERS_RAPOR_BUTCE'/'local'/'LOKAL'/'0.2011.07.19.10.22.15'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application local/HF_PERS_RAPOR_BUTCE.. Reason: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted

Hi,
Since the exception says "Are all referenced components deployed and available on the engine?"
Check wether any DC is used as a used DC in the webdynpro component which you are deploying.
If any used DC is available try to deploy that DC in the server and then deploy ur webdynpro application.
If all reference DC's are avialable in server, still if you get this error try to rename the component and reload+rebuild the project and deploy it.
Hope this helps you...
Regards,
Saleem Mohammad.

Problem with breakpoints in Web Dynpro components

Hello experts,
I have problems with breakpoints in methods of Web Dynpro components. Sometimes everything works as expected and a new window with the debugger comes up. Sometimes the breakpoints are ignored, and debugging is impossible. It even happens that a colleague can debug and I can't or vice versa.
I am setting breakpoints with button "Set/Delete External Breakpoint", and the message always is "Breakpoint is set for user xxx". But sometimes when I display a method there is a warning that external debugging is not active. What does that mean and what is the reason for that?
As adviced in the SAP help document "Debugging Web Dynpro ABAP Applications" I have enabled the new Front-End Editor and the new debugger, but still the problem exists. Does anybody experience similar problems or have an explanation for this?
A second question concerns the different types of break points. My Web Dynpro component has an assistance class, and if I want to set a breakpoint there, I can choose between a session breakpoint and an external breakpoint. What exactly is the difference between these types? And here in the forum I sometimes read about internal breakpoints. Is this even a third type, or the same as session breakpoints?
Thanks, Karsten

Hi Kartsen.
External Breakpoint -> can be started from outside the SAP GUI (e.g. WebDynpro)
Session breakpoints are used if you start a programm or something like that in SAP GUI.
I have the same problem ... sometimes he does not recocnize a new break point ... so I just reload the page and the break point works.
If external debugging is not active, you habve to activate it in SE80 Utilities->External Breakpoints.
Also make sure that in your Settings the correct debugging user is set:
Utilities->Abap_Editor->Debugging.
Cheers,
Sascha

Problem with starting the Web Dynpro Application

Hello,
I have a problem with my web dynpro application, which is in our SAP Portal. We have three different systems (development, test, production). In production always the follewing error message occurs:
The URL https://zsil2401.servers.wacker.corp:9004/sap/bc/webdynpro/sap/ZPLM_EN_FORM_300MM/ was not called due to an error.
Note
The following error text was processed in the system P1A : is not a valid attribute type.
The error occurred on the application server zsil2401_P1A_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GETATTRIBUTE_RTTI of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: INIT_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: CREATE_FROM_STRUCT of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IFWDR_RG_CTRL_HANDLE~INIT_CONTEXT of program SAPLWDR_RG_GENERATED_SRC_API
Method: IFWDR_INTERNAL_API~INIT_CONTEXT of program SAPLWDR_RG_PROXY_FACTORY
Method: CONSTRUCTOR of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: IF_WDR_CLASSLOADER~GET_COMPONENT_CONTROLLER of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: CONSTRUCTOR of program CL_WDR_DELEGATING_COMPONENT===CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Some User get this message also in test an development. What could be the reason?
Note: Nothing has changed in coding or context.....this error occurs without any changements
Thanks for your help
Best Regards
Martin

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Problem in submit button on adobe form integrated with web dynpro

Hello,
I'm facing prob in triggering web dynpro event onSubmit for Interactive form.
I've created a submit button from web dynpro activex pallete on adobe form (integrated with web dynpro) to send the form as email.
Then in the web dynpro view where this form is embedded i have created an action against onSubmit event and called a method within this.
However, on clicking Submit button this event is not getting triggered.
Please let me know what is lacking in this process?
Thanks.

Hi,
I am also facing the same problem. i have developed a simple scenario under which user have to input his/her details and on submit button it will be updated to database.
I have tried the above solution but after adopting this solution all the editable fields become non-editable.
so the above solution is not working for me could you help me out.
I think ... try this....
When you create the Adobe Form from WebDynpro, you need to follow one step in SFP Transaction or inSE80 transaction. Open the Adobe Form in any one the transaction and now in SAP menu bar "Utilities" in that you will find the "INSERT THE WEBDYNPRO SCRIPT" just click on that one. Then you will see a new Script Object is being created with the name "ContainerFoundation_JS" under the "Variables" in the Heirarchy of the Object Pallete of the Adobe Form.
This step is mandatory to use the SUBMIT Button of the "WebDynpro Native", to trigger the OnSubmit event of the WebDynpro.
Thanks
Edited by: shailendra2sap on Mar 6, 2009 12:24 PM

Problem with HowTo guide - Use the BI Java SDK in a Web Dynpro Application

Hello,
I am following the HowTo guide - Use the BI Java SDK in a Web Dynpro Application
at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f">this link</a>.
I have configured the connector on the WAS as needed.
The problem is that when I run the application I receive an Unauthorized error on the connector URL.
If I open this URL on a browser I receive a pop-up for UID and PWD and when I enter the same UID and PWD I used to configure the connector I am able to login and see the WSDL.
Any ideas?

I've never tried using BI in WebDynpro !!!
But i foond one posting on the connection problem https://forums.sdn.sap.com/click.jspa?searchID=955524&messageID=2133396
Regards,Anilkumar

Problem in Closing a web dynpro application

Hi experts,
I wanted to close the application when the user clicks on the close button.
I created a out bound plug "EXIT" of type 'EXIT' in my window.
I also created a parameter "CLOSE_WINDOW" of type "WDY_BOOLEAN" for the outbound plug
Now in action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog = wd_this->get_ywd_maintain_catalog( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
where ywd_maintain_catalog is my window name.
when i check the program i am getting the below error:
get_ywd_maintain_catalog_ctr is unknown or protected or private.
I refered the standard web dynpro component "WDR_TEST_EXIT_PLUG" to implement the logic
Pls help
Regards,
Vinod

Hi all,
This is my requirement when i click on a close button the application should close.
i refered to a web dynpro component "WDR_TEST_EXIT_PLUG" where they have explained the way to use exit plug.
They have created a outbound plug in the window called "EXIT" of type exit. and in the action of the button they have used the below code to fire the outbound plug.
method onactionfire_exit .
data: l_ref_wdr_test_exit_plug type ref to ig_wdr_test_exit_plug .
l_ref_wdr_test_exit_plug = wd_this->get_wdr_test_exit_plug_ctr( ).
l_ref_wdr_test_exit_plug->fire_exit_plg(
url = 'http://www.google.de/'
endmethod.
I followed the similiar approach in my code:
I created a out bound plug "EXIT" of type exit in my window.
then in the action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog =wd_this->get_ywd_maintain_catalog_ctr( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
The problem i am facing is i am getting the error "method get_ywd_maintain_catalog_ctr is unknown or public or private"
I am referred to the below URL to do it :
link: [Exiting a Web Dynpro Application by pressing a button on a Web Dynpro View]
Regards,
Vinod

Problem deploying sample web dynpro application.

I am not able to deploy and run a sample code of Web Dynpro. It gives the following error.
<b>Caught exception while checking the login credentials for SAP J2EE Engine. Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
</b>
I am able to log in to SDM using the same password but not deploy the code.
I have also tried restarting the server, SDM.

Hi,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Now you deploy.... Otherwise see this thread same problem but solved.
Re: An Deploy Problem about Credentials.
Regards
Suresh

IAspectRow problem in Web Dynpro DC on DTR

Hi All,
I created a Web Dynpro DC project on our DTR and added the required 'Used DCs' to it, and added the required library references. If I try to add and bind a context model element, however, my project won't build. It gives the following error:
file comsaptccolclientgenericapiIAspectRow.class not found
In the tasks view it provides these errors:
The project was not built since its classpath is incomplete. Cannot find the class file for java.lang.Object. Fix the classpath then try rebuilding this project.
This compilation unit indirectly references the missing type java.lang.Object (typically some required class file is referencing a type outside the classpath)
I've tried modifying the used DCs and repairing the project class path, but nothing seems to work. Once while adding the library references, NWDS asked me whether I wanted to apply the changes after clicking on 'Ok', something which I have been unable to reproduce. Could this be the problem?
All help will be appreciated,
JP

You have two problem here.
FIrst one is because of "IAspectRow" missing in jars you have in your dc dependency.
Second one you mentioned about class for java.langObject not found: Is definetly because of jre missing from your class path.
Go to project properties. Add the library "JRE System library" to your project class. This will solve your second problem.
I am not sure about first one.
Regards,
Ashwani Kr Sharma

Problem in connecting JCO destination in web dynpro

HI all,
I was installed sneak preview of Net weaver 6.4,
I want to do some web dynpro (java) programs which connect to back end systems.(R/3 system).
The R/3 system which I want to connect is at remote place, i have connectivity to that R/3 system using VPN connectivity. With this I am not having any problem. Since I am able to connect using User name and password, and able to do some transactions like RZ70, etc.
I developed an application which calls COMPANY_CODE_GET_LIST (BAPI function).
for the above requirement what I did was
(1)I created SLD setting.
(a)Web as Java (I am not having any problem to
Create this.
(b) Web as ABAP.
When i am trying to create
This, there are some steps like i need to go to SAP log in and I need to run the transaction RZ70. For this i need to create an enter in visual administrator>JCO RFC Provider>runtime-->Bundles i need to create an entry for RFC destination as well as Repository.
under RFC destination there are some fields which i need to enter those are (a)Program ID as mySLD (b) Gateway Host as 10.10.10.125 (c)Gateway service as sapgw00 (d)Number of processes as 1
Under Repository (a) Application server host 10.10.10.125 (b)system number as 00 (c)Client number as 100 (d)Language as en (e)user as ABCD (f)password as 1234
I haven't choused the check boxes Local bundle and Unicode and pressed the set button. So like this i created the RFC destinations. under the properties tab there is a property called RFC_DEFAULT_DESTINATION by default it was false so i made it as true. .
I also went to SLD Data Supplier,under Runtime tab , HTTP Settings , I mentioned
(a)Host: pava-vis75
(b) Port: 50000
(c) user: administrator
(d) password: abcd1234
RFC Settings, I mentioned as
(a)Gateway Host: 10.10.10.125 (which is SAP R/3 system)
(b)Gateway Service/Host: sapgw00
CIM Client Generation settings, as
(a)Host: pava-vis75
(b)Port (http/https):50000
(c) user: administrator
(d) Password : abcd1234
I tested the CIMClient Test by click the the button. I got the successful message.
Then I came back to HTTP settings and clicked the button with tilted arrow mark [This triggers data transfer to system landscape directory], for this also I got a successfully message.[data transferred successfully]
Next I been to SAPLOGON and went to RFC Destinations by using sm59 transaction. There under TCP/IP connections i been to SLD_NUC , opened this by double clicking that and under Technical settings for Program ID I had given the ID which I created at visual administrator [JCO RFC Provider] which is mySLD , under gateway options for Gateway Host as 10.10.10.125and Gateway service as sapgw00 then i tested the connection, it was also successfully.
Then I opened the SLDAPICUST and i created a new entry for maintaining the SLD Access Data by giving some couple of entries as
(a)Alias: vissldtest
(b)Host Name: pava-vis75
(c)Port: 50000
(d) user: administrator
(e) password: abcd1234
Then saved it.
Next I created sapmsUV0 3600/tcp entry at
WINDOWS\system32\drivers\etc\services file, and also there are some required entries which are already existing those are sapgw00 3300/tcp to sapgw99 3399/tcp , another entry starts from sapdp00s 4700/tcp to sapdp99s 4799/tcp , next entry starts from sapgw00s 4800/tcp to sapgw99s 4899/tcp and sapmsJ2E 3601/tcp .
I restarted the system, as well as server.
Now my problem is when I was trying to create JCO destination at web dynpro content administrator. For that I navigated as create JCO Destination Deployed Contentlocal-local/CompanyCodeGetList-Applications CompanyCodeGetList
I Choosed the JCO Connections tab- there are 2 entries those are
(1) COMPANY_CODE_MODEL
(2) COMPANY_CODE_RFC_METADATA
So I started creating connection for COMPANY_CODE_RFC_METADATA.
First one is
General data Name : COMPANY_CODE_RFC_METADATA
Client : 100
I didnt changed any default JCo pool configuration.
J2EE Cluster
There is a check box called Use Local J2EE engine J2E on pava-vis75 so I choosed that.
Connection Type
Dictionary Meta Data and application Data
I choosed the first one.
Then
Msg. Server Connection
Security
After these, I tried to test the connection by clicking the Test Connection.
It is saying the error as
First time
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=v011 GROUP=DEFAULT R3NAME=UV0 MSSERV=sapmsUV0 PCS=1 ERROR service 'sapmsUVO' unknown TIME Fri Jul 01 07:20:41 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
second time
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=v011 GROUP=DEFAULT R3NAME=UV0 MSSERV=sapmsUV0 PCS=1 ERROR service '?' unknown TIME Fri Jul 01 07:20:41 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 1
Can any body please help me to solve this problem.
From past 1 week on wards I have been trying to resolve this. But in vain.

It does not necessarily mean that you have to change that parameter. I read that blog as I had a similar problem, and after reading it and understanding the reasons and possible causes for the error, I found that my particular problem was that I was using "PUBLIC" as the logon group in my JCO destinations, but such a group does NOT exist at my backend. I went to transaction SMLG, had a look at Logon Groups, noted that there were none other than SPACE, figured out that I had to include that information in SLD (Web AS ABAP tech. system --> Message Server --> Logon Groups), put it there. Voilá. It works.
Edit: That SPACE logon group is the one I had to use at JCO destinations. Sorry I forgot to mention that one...
Regards,
Eduardo.
Message was edited by: Jesus Cil

Value hep problem in web dynpro application

Hi All,
I have a requirement where I need to add a field for alternate payee to the web dynpro application and the field name is BSEG-EMPFB. I have written the following code to get the values of it based on the vendor number:
SELECT SINGLE * FROM lfb1 INTO f4lfb1_z
                  WHERE lifnr = lv_lifnr
                  AND   bukrs = '001'."bseg-bukrs'.
CALL FUNCTION 'FI_VENDOR_ALTERN_PAYERS_READ'
    EXPORTING
      i_lifnr            = lv_lifnr
      i_filkd            = filkd
      i_bukrs            = '001'
      i_lfb1_head_office = f4lfb1_z
    TABLES
      t_zemtab           = t_zemtab.
LOOP AT t_zemtab INTO w_zemtab.
    ls_value_set-text = w_zemtab-empfb.
    ls_value_set-value = w_zemtab-empfb.
append ls_value_set to lt_value_set.
DATA lo_nd_alt_payee_info TYPE REF TO if_wd_context_node_info.
DATA lo_nd_alt_payee TYPE REF TO if_wd_context_node.
lo_nd_alt_payee = wd_context->get_child_node( name = wd_this->wdctx_alt_payee ).
lo_nd_alt_payee_info = lo_nd_alt_payee->get_node_info( ).
         lo_nd_alt_payee_info->set_attribute_value_set(
            name = `ALTERNATE_PAYEE`
            value_set = lt_value_set )
Now the problem is user wants the details of the alternate payee as F4 help and when I debugged the standard FV60 functionality this how the F4 help is being build therE:
REFRESH fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'EMPFB'.
fldtab-selectflag = 'X'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'NAME1'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'ORT01'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'STRAS'.
APPEND fldtab.
*------- Fill Values for Function Module Call --------------------------
REFRESH valtab.
LOOP AT zemtab.
    valtab-feld = zemtab-empfb.
    APPEND valtab.
    valtab-feld = zemtab-name1.
    APPEND valtab.
    valtab-feld = zemtab-ort01.
    APPEND valtab.
    IF zemtab-stras NE space.
      valtab-feld = zemtab-stras.
    ELSEIF zemtab-pfach NE space.
      CONCATENATE 'Postfach:'(019) zemtab-pfach INTO valtab-feld.
    ELSE.
      valtab-feld = space.
    ENDIF.
    APPEND valtab.
ENDLOOP.
*------- F4 Dialog -----------------------------------------------------
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      display      = space
      fieldname    = 'EMPFB'
      tabname      = 'INVFO'
    IMPORTING
      select_value = empfb
    TABLES
      fields       = fldtab
      valuetab     = valtab.
IF NOT empfb IS INITIAL.
    invfo-empfb = empfb.
ENDIF.
can you please tell me how can I accomdate this in the web dynpro application?
Thnaks,
Edited by: rajatg on Jul 13, 2011 6:41 PM
Edited by: rajatg on Jul 13, 2011 6:42 PM

Hi Raja,
Search help is availble at dictinary level you get F4 help automatically.
Otherwise create OVS help for alternate payee. use WDR_OVS.
check this..
http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
Cheers,
Kris.

Problem in web dynpro ABAP program

There are 2 input fields on first view carrid, connid and one "GO" Button
1) "FLIGHTINFO" is the node under context of first view
2) " FLIGHTTAB " is a node under context of component controller having cardinality " 0..n " ,Dictionary structure "SFLIGHT" (i have selected only these many attributes " carrid, connid, fldate, planetype, seatsmax and seatsocc " )
3) I have created Method "FLIGHTTAB_FILL" in component controller to fill context node FLIGHTTAB
Insert the source code for doing the following:
-     Navigate to context node FLIGHTINFO
-     Get element at lead selection for context node FLIGHTINFO
-     Get CARRID and CONNID
-     Fill an internal table with all datasets from database table SFLIGHT, who meet the constraints for CARRID and CONNID.
-     Navigate to context node FLIGHTTAB
-     Bind the internal table(having all standard fields of sflight ) to the context node FLIGHTTAB ( having those 6 attributs).
4) On action GO ->Implement the invocation of Method " FLIGHTTAB_FILL".
5) I have mapped node FLIGHTTAB to context of OUTPUTVIEW. Display table on view OUTPUT_VIEW (for this i hav used code wizard).
Problem: after entering values of connid & carrid I m getting proper entries in internal table. but output view is not at all trigger (although i have created plugs). Is it necessary that while binding internal table with context node FLIGHTTAB should have same no of fields (i.e. in this case 6 )?
I am a fresher, My concept of bindings and cardinality are not so clear so can anybody help me out?
Thanx in advance for replying.

Hi johnright ,
    No i dont think it is necessary that while binding internal table with context node should have same no of fields as the internal table . You might get some improper values in the corresponding fiels but it will not lead to any error.
In your OUTPUTVIEW once you created the table UI element in layout and you bind it to FLIGHTTAB node you dont have to use any code wizard method to display the values. If the node contains values it will display automatically. (in your case you are filling it in step #).
Check :-
1. In your On action GO after filling the table you are firing the out bound plug :-
    WD_THIS->FIRE_INITIAL_OUT_PLG(
2.All outbound plug and inbound plug are link properly and every thing is ACTIVATED.
If still unable to find the error try to debug method wise and find where the error occurs and reply to us.
Binding:-
In web dynpro ABAP you will not able to get any value of any variable outside of any method. Here we use context node which is referrence that we create reference to any particular structure we required. Now to hold the values you need to bind
the values of your internal table to the context node.
If the node is in view then its values are visible to all the local method of the view.
If the node is in component controller then the you bind a value to the node from one view and you can get it in another view.
Remember binding and mapping are not same.
Mapping is done between node like inthe second scenario i have explained you need to create a node in view controller and then you need to map it to the corresponding view of component controller to send values across view.
cardinality:-
Each node contains data fields that represent one of the following:
    An individual instance of an object type
    A table of instances.
This property of a node is known as its cardinality of table of instances.
If you need table instance :- 0..n or 1...n
   In case of 1...n one default value is created. generally we use this as mainly we need to work with table.
In case you need a individual instance of a object or like you want value like a structure only :- 0...1 or 1....1.
Thanks & Regards,
Monishankar C

Problem in abap web dynpro URL issue

Hello All,
I have created a web dynpro for calling different tables with F4 help dynamically through ALV webdynpro, I can update, delete/insert row in ALV for multiple tables with one webdynpro program.
Now problem is user wants to create url for different tables and keep it in the portal using with this webdynpro program like that i need to create more than 20' url's and keep it in portal with current created web dynpro program.
Could please provide any solution for this issue.
Thanks in advance.
Regards
Sri

You could try passing the table name as a URL parameter.
i.e.
http://<server>:<port>/sap/bc/webdynpro/sap/<app_name>?table=MARA
This can be read in your WD application and use it to determine the table to display. There is a heap of content out there on the internet that explains how to do this.
https://help.sap.com/saphelp_nw04s/helpdata/en/2f/e7574174c58547e10000000a1550b0/content.htm
Regards,
Katan

Problems creating new Web Dynpro ABAP application

All,
I am following this tutorial to create my first Web Dynpro ABAP application
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm
In this tutorial I was asked to create a component as Local object.
But after giving the name of the component, I get an alert saying
"Object can only be created in SAP Package"
When I confirm this, I was shown a "Create Object Directory entry" dialog box which asks for attributes like Package.
And this box has Local Object button, when clicked I get the message "Test Objects cannot be created in foreign namespaces".
I found some other article through Google
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
According to this, I tried to give $TMP as Package. But still have the same error
"Test Objects cannot be created in foreign namespaces"
Where am I and what should I do to create a new project?
Thanks.

Thanks Abinav.
My problem is with naming convention only. Component name starting with Z solved my problem.

TEM Web Dynpro problem

Similar Messages

Maybe you are looking for