Temperature problems with msi mother 790xt-G45 and AMD Phenom 720

friends! 790xt my mother-G45 msi amd phenom with a 720 and I check the bios wrong temperature, 44C takes me where in my previous mother was in another brand 36C, Everest takes me for 27C and the CPU core 44! temperatures agree with everest bios, change the fat artic silver, I put a shark evercool cooler lowers the temperature not help please

Brrr! I don't like CoolerMaster.  Is OCZ cheaper than Thermaltake?
http://www.microlabargentina.com.ar/shop/productos.asp?consultar=buscar&busco=ocz
http://mx.thermaltake.com/Product.aspx?C=20&ID=96
Mod 1: Oh! The shop says OCZ is Antec. Don't buy from there.
Mod 2: The 500W OCZ StealthXStream is exactly twice as expensive in Argentina as in USA. In USA it is 50 US.
http://www.newegg.com/Product/Product.aspx?Item=N82E16817341012 I am afraid it will not last very long...
Can you afford this one?http://www.f1computers.com.ar/ver_producto.asp?Id=355

Similar Messages

  • Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

    I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
    It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
    Here are the details of my system:
    MSI K8N Neo2 Platinum (BIOS 1.B)
    Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
    2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
    Asus Radeon AX800 Pro (256 MB)
    PSU Antec Sonata 380W
    HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
    HDD Seagate 250Gb SATA (ST3200822AS)
    HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
    Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
    BenQ DW1640 DVD-Writer ATA (Sec Slave)
    P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

    Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
    Now I've contacted Maxtor for (hopefully) a new firmware.
    Quote from: rogueUK on 31-July-06, 16:55:42
    insego please use the SEARCH BUTTON
    I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
    Quote
    Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
    Maybe in retrospect I should first have tried the solutions in other topics.

  • Problems with MSI Web Live updater and Downloadable updater

    First off im new and second im sorry if this is the wrong spot.
    Ok i did a reinstall of windows Xp updated with Microsoft's updater all the way up to SP2. In the past i had no problems at all with the MSI Updater. Now i have problems  :(  Please read below.
    Hi i would like to know if anyone else has this problem;
    I try to use the Web Browser version of the MSI Updater,well while its trying to scan it will say "Error" "service not started" about 4 or 5 times.
    When i use the Downloadable version of the MSI Updater it crashes when its scanning and my computer will reboot till i go into safe mode and uninstall it.
    Im going to be getting this Motherboard soon http://www.newegg.com/Product/Product.aspx?Item=N82E16813130136  I'm not sure if i want to if the MSI updater will no longer work. I have always depended on the Updater for my drivers cause i'm not the most tech savvy person in the world plus its very convenient to have all the drivers in one spot.
    if this updater continues to not work im not sure where i can get the drivers. I dont want to get the wrong drivers and by mistake kill my board cause i flashed my board with the wrong drivers. if its not fixed i may not get anymore MSI boards :(
    So does MSI realize that they killed there updater? i mean it worked fine in the past but now its a piece of junk :(
    Please help.
    P.S. Im not trying to be mean or flame im just frusterated :(

    1st we are talking about drivers here... not BIOS.
    You shall not update your BIOS without very good reason, read here ==> https://forum-en.msi.com/index.php?topic=103441.0
    "i have MS-6712 those BIOS updates don't work and even at the bottom of them it says "this bios can not be used with MS-6712"
    Yes because there are several mainboard MS-6712.
    "This BIOS cannot be used on KT4V (MS-6712) & KT3V (MS-6712)"
    That's correct your mainboard is KT4AV {also MS-6712, but use different BIOS. That's why is that warning notice.}
    "So now that we know those BIOS updates don't work are you still sure those are the right updates for my board? Please make 100% sure."
    Yes they are correct if you really have KT4AV.
    Leave BIOS alone.
    If you want to update your BIOS and need help with BIOS update, read here 1st ===> https://forum-en.msi.com/index.php?topic=113146.0
    and provide information about current BIOS version onboard. You may have an OEM mainboard.

  • Problem with msi pt8 neo-v and sata drive

    hi, i have a hitachi 80gb sata2 drive( its configured to work as sata1 to work properly on the motherboard) and the msi pt8 neov motherboard, the problem is that the transfer mode is showing incorrectly on hdtune and everest plus it doesnt give the features right, like shown in the image below. everytime i open hdtune gives me a different transfer mode and features get ticked/unticked.
    ive tried the disk on another pc i have and it shows info correctly so it cant be the hard drive, what could be causing this?
    i have installed the hyperion 5.13a drivers and tried too with the microsoft drivers, still the same.
    hope someone can help me out as is driving me crazy!
    oh one last question, in bios settings i see the sata drive( just using one) as bbs-0(raid) HDS728080pla380 why is that? ive tried disabling "bootrom function" under Sata controller but then it wont recognize it, is there a way to change this??

    Quote from: duhast1 on 13-October-07, 06:28:13
    SATA Transfer mode, it changes everytime i open hdtune AND features get ticked unticked everytime i open hdtune as well, like if transfer mode was changing constantly
    Unless, you use your disk purely to benchmark, your transfer rates will dynamically change. As data is written to drive or removed.........
    Everything is working fine 

  • Problems with msi k8n neo-2 and xfx 6800 card

    is this card incompatible with the msi k8n neo-2 motherboard?
    i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
    What can i do?

    Thats not what I read (assuming this is the same correct model)
    420W double unit
    DC O/P Load Max
    +5V 42 Amp.
    +12V 16 Amp.
    +3.3V 28 Amp.
    -5V 0.5 Amp.
    -12V 0.8 Amp.
    +5VSB 2 Amp.
    Agreed that one is 420W, but is that it or not?

  • Problem with MSI 6330 lite v1 and athlon 1G

    I have an athlon at 1ghz.bios ,windows ,directx tell me that is athlon at 750 mhz. This is an authentic athlon, on the core is writen 1000. Please help me!!!
    mail: [email protected]

    Do you have a athlon B-type or C-type? C-Type requires fsb133. 750/100*133=1000.
    Please read the trouble guide to identify your cpu.

  • [Athlon64] Problem with MSI RS480M2-IL

    Hi all,
    I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
    MSI RS480M2-IL
    AMD 64 3000+ Venice E3
    Bios Version 3.8
    Geil PC3200 DDR400 2.5-3-3-6
    Maxtor 60GB HDD 7200RPM 2mb
    Verudium Power Vortex 420W
    Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

    the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
    so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
    in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
    so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
    based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely  hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
    perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem  to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
    one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops) 

  • Multiple Problems with MSI 890FXA-GD65

    I am having problems getting a clean build of new components to work.  The components are:
    motherboard is MSI 890FXA-GD65
    processor is AMD Phenom II X2 565 Callisto
    memory is 2x 4Gb G.Skill Ripjaws X model F2-12800CL9D (CAS 9, Unbuffered DDR3 1600)
    disk drive is a Western Digital Caviar Black WD1002FAEX 1 TB SATA III
    card is an MSI N460GTX Cyclone 768D5/OC.
    power supply is an Antec NEO ECO 620C 620W
    operating system is Windows 7
    All items are brand new, and being assembled for the first time, so nothing is overclocked.
    I have three problems.  First is that the video output is flaky.  I initially thought that the board wasn't POSTing, because I was getting no audible 'beeps' and there was no display output (does this board not have a speaker or speaker header?).  Through trial and error, I discovered that the board was POSTing, but I could not see anything because of a strange video problem:
    If the monitor is connected when the video output changes, then the video will not work, and disconnecting/reconnecting will not fix it. For example. If the video cable is plugged in during a cold start, I will get no video output. If I wait a few seconds until the Bios loads, and then plug in the video, then I get a video signal. However, if I leave it plugged in as the video output switches when Windows starts up, then I lose video again. Only by plugging in and then unplugging during the same video output mode can I use the output.
    I have tried 2 different video cards (same mdodel number) with the same result.  I have tried switching my memory with only 1 stick and with both sticks installed.  I don't have another processor to try.
    The second problem is that Windows will not run with the USB controller turned on in BIOS.  It starts 'loading files' and then just hangs.
    The third problem is that the MSI utility program will not run properly.  I tried to install the updated chipset drivers, but the installation hangs.
    Thanks for any help!!  I am on the verge of returning the board to NewEgg after many hours of trying to troubleshoot this build.

    Quote from: JimmyK on 15-February-11, 22:22:46
    Thanks for the reply.
    Sorry to be so newby, but where do I start memtest?  The reported BIOS is the same version/date code as what is available from MSI...
    >>Memtest86<<
    Quote from: JimmyK on 15-February-11, 22:26:23
    Thanks for the reply.  I am using the DVI output on the video card connected to a VGA monitor with an DVI-VGA adapter.
    No external USB connections have ever been installed.
    I don't have any other DDR3 laying around.  Is there a recommended memory list on the MSI site?  I couldn't find one.
    Regards
    http://www.msi.com/file/test_report/TR10_2220.pdf
    However its down to the CPU as memory controller is there.
    You should use AMD tested memory sticks

  • Problems with msi p35 neo 2

    Default problems with msi p35 neo 2
        pc works fine when using windows and the net and emails
        only when using 3d mark or games do i ever get problems
        just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
        tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
        now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
        temps on the board (from msi dual core center temps cpu 33oc system 47oc)
        memory voltage 2.1
        any one know the settings for the ram
    more details you need
    System Details
    MotherboardEdit Value
        msi p35 neo2 fr
    Motherboard BIOSEdit Value
        latest
    CPUEdit Value
        core 2 quad 6600
    CPU Overclock SpeedEdit Value
        none
    CPU HeatsinkEdit Value
        standard intel that come with cpu
    CPU Idle TempEdit Value
        N/A
    CPU Load TempEdit Value
        N/A
    MemoryEdit Value
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
    Memory VoltageEdit Value
        N/A
    Video Card(s)Edit Value
        ati hd4870
    Video Card SpeedEdit Value
        N/A
    Sound CardEdit Value
        onboard
    PSUEdit Value
        g7 780 watt power extreme
    Hard Drive(s)Edit Value
        mator dimondmax 21
    Optical Drive(s)Edit Value
        N/A
    Other CoolingEdit Value
        3 80mm fans 1 frount 1 back 1 side
    ModsEdit Value
        N/A
    Operating SystemEdit Value
        windows 7

    Quote
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
       Quote
    memory voltage 2.1
    Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x).  Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800).  The voltage at these settings should not need to exceed 1.95V.  So please lower it accordingly.  In case the freezes still occure, please run memtest86+ to check your memory for errors.
    Quote
    msi dual core center
    Please get rid of that tool for all further tests.  Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

  • USB problem with msi (nforce 1)k7d420

    USB problem with msi (nforce 1)k7d420
    i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
    it detects and install the device automaticly but when i want to access it,it just gives me error msg
    windows xp pro service pk1
    nforce nvidia drver v2

    http://www.nforcershq.com/forum/viewtopic.php?t=30003
    may be ive not loaded it yet

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Maybe you are looking for

  • Can i upgrade the processor in my laptop

    can i upgrade the processor in my laptop hp notebook 2000-2d03tu. if yes than plzzz post the list of processors. thanks in advance This question was solved. View Solution.

  • Help extend my wireless signal

    We live in a house that is about 100 yrs old and my office is in the breezeway (an extension to the home). I have a nice Cisco router but some days I lose signal 20-40 times throughout the day and other days I don't lose signal at all. Ideally I'd li

  • Guys i m nt able to download ios5 it coming tht tht the request has timed out ?

    guys i m nt able to download ios 5 i dont knw. on the other hand my iphone 4 is frm uk it wsa vodafone locked wen i came to mumbai i hd it factory unlockd nd nw i m scared tht as soon i upgrade it nto ios 5        it will get locked again wht shud i

  • If an item is deleted before opening does it open in the background anyway?

    If an item is deleted in 'mail' before it is opened does it open in the background anyway? I am concerned about hackers, worms etc.

  • Reference Movies and Streaming Server

    I have compressed my movie in multiple streaming sizes, 56k-T1. I have tried several times to use MakeRefMovie app to make a MSTR movie that will deliver up the propery version of the movie on the Streaming server they will reside. I get an error eve