Template Fonts View Tiny but Preview OK

I am redesigning the site for my school & am working w/
pre-supplied html templates.
Something is causing the fonts to be viewed as extremely tiny
& unreadable. Images appear in their correct size. The template
previews fine. The correct css is properly linked to. Changing view
magnification does not help.
What is causing this & how can I solve it?
Thanks, -Barry

You have a rule -
td { font-size:76% }
Each nested table multiplies this value, so in the first
table on the page,
all fonts are 76% of the base size. In the second nested
table, they are
76% of 76%, or 58%, and in the third, they are 44%.
That would about explain it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"paiwacket" <[email protected]> wrote in
message
news:f5ubor$1mb$[email protected]..
> Screenshot
http://www.albany.edu/finearts/dev/tiny1.jpg
>
> Templates
http://www.albany.edu/finearts/dev/Templates/

Similar Messages

Font in Design View different from font in Live View and browser preview

My external style sheet has the body set for a sans-serif font and there is nothing to contradict it in the HTML documents. But while I get sans-serif in the Design View (as you would expect), I get a serif font in Live View and Browser Preview, not to mention on the Web itself.
How is this possible (and what should I do about it)?
--Paul

Murray and David: it worked! It is a rare and joyous experience to have a straightforward solution to the sorts of problems I come up with (including other realms). But I have to say that with HTML and CSS (and hence with Dreamweaver), solutions to difficulties have seemed within easier reach than in other parts of the computer world.
By the way, I wanted to choose "correct answer" for both your posts, but after making the first click it was no longer available for the remaining post--so I typed "helpful" even though that one was correct too.
Thanks again.
--Paul

Mycurrent portal template defaults the view of approval preview to Graphic.

Hi Gurus,
My current portal template defaults the view of approval preview to Graphic in SRM ,but We would like to change this so the default view is table instead.
Is there any possible way that we can do it easily, first of all how feasible it is?
Can any one suggest me the process to follow up for this.
Best Regards,
Sairam.

Hi
Please check Notes
Note 1077956 - Follow-on document display: Tabular displ instead of applet
Note 1028482 - Approval preview: Tabular display instead of Applet
Approval preview in SRM in table form by default...
Please look in SRM - SPRO Settings ->
Here is the path ->
SRM Server -> Cross-Application Basic Settings -> SAP Business Workflow -> Activate Signed Java Applet for Approval Preview and Documents
Deactivate java applet approval preview
Also, please see the SAP Consulting OSS Notes, which talks about the same problem ->
Note 1077956 - Follow-on document display: Tabular displ instead of applet
Note 1028482 - Approval preview: Tabular display instead of applet
Deactivate java applet approval preview
Hope this will definitely help. Do let me know.
Regards
- Atul

Current portal template defaults the view of approval preview to Graphic

Hi Gurus,
My current portal template defaults the view of approval preview to Graphicin SRM ,but We would like to change this so the default view is table instead.
Is there any possible way that we can do it easily, first of all how feasible it is?
Can any one suggest me the process to follow up for this.
Best Regards,
Sairam.

There are similar questions in this Forum.
<a href="https://forums.sdn.sap.com/click.jspa?searchID=6840557&messageID=4313831">https://forums.sdn.sap.com/click.jspa?searchID=6840557&messageID=4313831</a>
Regards,
Masa

Yellow Boxes around type in normal view mode but not in preview?

There are these yellow boxes that appear around type when in normal view mode, but when in preview mode it disappears.....any idea of what I can do to alleviate this issue? Here is an image of the problem....

This link should explain it:
Field Guide to Composition Highlighting | InDesignSecrets

PDF font viewed Evince different than actual PDF font?

The title says it all. I'm getting a very strange girly font (no offense, but the i's are dotted with hearts) being rendered for all the text on the PDF. Some PDFs that I view in Evince retain their original font. I have no idea why this is happening, and neither do I have this font on my computer. I am so definitely sure about that. Does anyone have ideas?
I'm using Gnome3 if that matters any.
Thanks in advance!

Have you tried a different pdf viewer? Gimp or inkscape can view pdf files or pages. Epdfview is a lightweight, less feature-full alternative to Evince.
It might help to identify the font. You probably have the poppler package installed. If so, you can use 'pdffonts' to list the fonts used in the problem file. The mupdf package includes 'pdfinfo-mupdf' that can also be used to list the fonts used in a pdf-file.

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

Hi Larry. I see. It is a file I have worked on previously, and the font is Myriad which I though came with the system. I just changed to Myriad Pro and the pink box disappeared. Thanks for the assistance, I know a new thing!

Trouble Viewing PDFs in Preview

Hey all,
I am having trouble viewing PDFs in Preview 4.0 on my MacBook Pro, running Leopard (10.5.1). I can Quick Look the documents from my desktop (or any other folder) fine. However, when I double-click the document to open it in Preview, i get nothing. Preview opens, but does not display the document, or anything for that matter. I even tried to open PDFs from the Preview menu, but to no avail.
I just upgraded the internal hard drive, but everything else seems to be working fine, and this seems like a weird issue to be caused by a laptop upgrade.
Any ideas? I tried Disk Utility, but still nothing.
Thanks

Hi,
Have you tried deleting Preview's pref file? It should be located as a ".plist" file under preferences in your library folder.
Find the file "com.apple.Preview.plist" and move it to the trash for the time being. Run Preview again and see if that'll help. If this fixes it you can safely delete the .plist file that's in the trash.
Good luck.

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

Cannot view the HTML preview

When I try to view the HTML preview after creating the presentation it is giving the following error:
Cannot Preview BPM Object Presentation.The BPM Object has errors that need to be resolved.
thanks,
Regards,
Archana

Hi,
I tried that way but it couldn't work.
It is giving the following error
Cannot Preview BPM Object Presentation.The BPM Object has errors that need to be resolved.
Illegal character in path at index 12: file:/C:/New Folder/cd-1/New Folder/webapps/workspace/
java.net.URISyntaxException: Illegal character in path at index 12: file:/C:/New Folder/cd-1/New Folder/webapps/workspace/
 at java.net.URI$Parser.fail(Unknown Source)
 at java.net.URI$Parser.checkChars(Unknown Source)
 at java.net.URI$Parser.parseHierarchical(Unknown Source)
 at java.net.URI$Parser.parse(Unknown Source)
 at java.net.URI.<init>(Unknown Source)
 at java.net.URL.toURI(Unknown Source)
 at fuego.designer.formdesigner.actions.HtmlPreviewAction.performShowHTMLPreview(HtmlPreviewAction.java:124)
 at fuego.designer.formdesigner.actions.HtmlPreviewAction.runAction(HtmlPreviewAction.java:83)
 at fuego.designer.formdesigner.actions.FormDesignerAction.actionPerformed(FormDesignerAction.java:43)
 at fuego.ui.peer.swt.SwtToolBarItem$AdapterListener.executeAction(SwtToolBarItem.java:251)
 at fuego.ui.peer.swt.SwtToolBarItem$AdapterListener.handleEvent(SwtToolBarItem.java:239)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
 at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
 at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
 at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
 at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)
 at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
 at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
 at org.eclipse.core.launcher.Main.run(Main.java:977)
 at org.eclipse.core.launcher.Main.main(Main.java:952)
Regards,
Archana

How to install gnome-font-viewer?

I can't find it in the repo's so what package do I need to install the gnome-font-viewer (btw, I'm using Xfce)? I was able to find an old version called "fontilus" on some forgotten FTP server, but that one conflicts with Nautilus o_O
Last edited by IceHand (2007-11-03 15:59:04)

Thanks
I had to use the pacman -d option, as I didn't want to install all these dependencies that I'm probably never going to use anyway (gnome-panel, evolution-data-server, db4.1, libsoup, metacity, libgnomekbd, libxklavier).

How to view Smartform Print Preview

Hi,
I have a Sales Order, Print output is issued which has smart form & Print Program. Can you explain me how to view the print preview again for the Sale Order for which ouptut has been issued in ECC 5.0.
Many Thanks
Lakshmi

Hi Atish,
I did tried by going VA03 Screen & then Selected
Extras- Output - Header - Print Preview from Menubar
but no luck I cannot see Print Preview of the output.
Thanks
Lakshmi

Simple Font Viewer

Hello everyone
This may be a dump question, but does anyone know a simple font viewer? When I was using KDE I just needed to click on a font file and I could see what the font looked like. Now I switched to xfce (with Thunar as file manager) and there is no such programme. I do not seek a fancy font management tool or something like that. I am sure I just need to pick the right Gnome package, just: which one is it?
Thank you very much in advance!
ZeKraut

[marst@iguane python]$ tupac font viewer
::* repo "local" has been updated
::* repo "core" has been updated
::* repo "extra" has been updated
::* repo "community" has been updated
::: saving
1 community/opcion 1.1.1-4
A font viewer written in java
2 aur/fonter 1.7-1 (1 votes)
An interactive viewer and editor for console fonts (8x16 .fnt)
3 aur/fontilus 0.4-2 (17 votes)
Font viewer for Gnome. Also known as gnome-font-viewer
4 aur/fontypython 0.3.6-2 (5 votes)
A font viewer and manager
==> Enter the package numbers you want to install. Separate choices with a space. Example: 1 2 5 14
==:

Unable to view captivate 8 preview project in internet explorer

unable to view captivate 8 preview>project in internet explorer. I get 404 web page can't be found. I haven't built an extensive layout. I just changed the title text and subtitle text to preview in a browser. It doesn't want to show any result. I notice the web address is http://localhost:4932/HTML5Temp5276756792Pre/rindex.html, how do I ensure I'm pulling information from the correct location? How do I set the parameters to get the file from the proper folder? I have changed the cache folder location to an external hard drive and I need to know how to let internet explorer recognize where to search for the preview of a project.

Nothing wrong with the web address. But this is a temporary address which gets generated while previewing.
After making the changes, did you just hit a Refresh in the browser to preview the updated version? If yes, this won't work as the web address would be different for every preview. Every time you need to preview, you have to initiate it from within Captivate (shortcut for HTML5 preview is F11).
Sreekanth

HT2506 Viewing images in Preview at actual size

Why does Preview open an image and display it in a size much smaller than the actual size?
The default is marked as "Actual Size" in the View menu, but it's much smaller than actual size. Nothing in Preferences changes this.
(I've never had a problem with this on my older Macs.)
Thank you!

Thanks, but that's not it I'm afraid. Here's what I mean. The image on the right is the actual size, as opened up in a web page. The image on the left is how Preview displays it when the file is opened. And hitting ⌘-0 doesn't change the size, only zooming does.

Template Fonts View Tiny but Preview OK

Similar Messages

Maybe you are looking for