Testing Adobe Interactive Forms

Can I know how can I test Adobe Interactive Form that I created through the HCM Form and Processes in backend R/3?

By the way, you may find it difficult to find help here with your "balance" between posts and points. Why would anybody help you when you don´t help anybody else?
Otto

Similar Messages

  • Unable to test Adobe interactive form from webdynpro

    This is the out put i get when i test run the report 'FP_TEST_IA_01'.As suggested in SAP NOTE : 999998
    ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200.101).
    Actually i was trying my first Adobe interactive form with webdynpro and when i tested it i got this message.
    The following error text was processed in the system NED : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
    Does Adobe interactive form requires Java stack to be active??
    Or is it only a configuration issue in ADS???
    What all should i take care in order to successfully run an adobe interactive form???
    Regards,
    Venkar Raghavan

    Dear Abhishake,
    Thanks for your reply.
    I had gone through the link you had mentioned detailly.what i understand that is ZCI needs to be installed thats comming with Support pack SAP NetWeaver SPS 10 .
    Will this also take care of ADS configuration.Where can i find a guide to ADS configuration and ZCI installation.
    When i ran a report check FP_CHK_REPORT below is the output i got.can you please throw more light on this.
    ISR      Prepare ISR templates for ZCI migration             ISR-001   Prepare ISR templates for ZCI migration
    ZCI      SAPForms API to Zero-client template migration ZCI-002   Update enumerated DDL XFO bindItems node reference
    ZCI      SAPForms API to Zero-client template migration ZCI-003   Copy enumerated DDL XFO form:ready non-Adobe scripts to the layout::ready ev
    ZCI      SAPForms API to Zero-client template migration ZCI-004   Add an XFO name to each of the embedded P1 Enumerated DDL XFO event handlers
    ZCI      SAPForms API to Zero-client template migration ZCI-001   SAPForm API to Zero-Client template migrator
    Regards,
    Venkat

  • Web Service is not triggering  using Adobe Interactive Form

    Hello Experts,
      I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
    Problem:--
    My requirement is to create an adobe form , in which
      -> an input field is needed,and some  description is needed.
    I used button to trigger my webservice.
    Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
    My web service is working fine as I have tested from WS NAVIGATOR(Note:  http://<source>:<port>/wsnavigator).
    In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
    All Request and Response parameters are availabe in Data View palletes of Form.
    Button that is available from data connection is used.
    I  have used Button as  an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
    But above things not worked so ,
    I also tried with Regular Button , and under click written Javascript/FormCalc  which is:--
    var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
    var service = SOAP.connect(cURL);
    xfa.connectionSet.DataConnection2.execute(0);
    But this also not worked .
    So, I think there can be a little issue may be , I am forgetting to click some special  atrributes in form .
    Please help me and let me know what can be probable reasons that webservice is not triggering
    Thanks a lot ,
    Jeet

    Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

  • Problem when deploy adobe interactive form

    Hai all,
    i am new to adobe interactive form designing,
    i had developed a simple adobe form, the following error occured while running the application,
    i had followed the procedure to "Installing a credential for Adobe Document Services"
    Help me to solve this problem
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to  UPDATEDATAINPDF
         at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:396)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
         at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:341)
         ... 29 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
    Processing exception during a "UsageRights" operation.
    Request start time: Tue Oct 09 10:51:37 GMT+05:30 2007
    com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_2182850\DM-7168388254160118756.dir\DM-2237897618368579481.tmp
    Specific error information:
    $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights
    General error information:
    IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
    Exception Stack Trace:
    com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_2182850\DM-7168388254160118756.dir\DM-2237897618368579481.tmp
    Specific error information:
    $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights
    General error information:
    IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
         at com.adobe.ads.request.UsageRights.execute(Unknown Source)
         at com.adobe.BaseADSRequest.doWork(Unknown Source)
         at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
         at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
         at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
         at SoapServlet.doPost(SoapServlet.java:51)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.adobe.document.pdf.NotAllowedByCredential: IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
         at com.adobe.document.pdf.NotAllowedByCredentialHelper.read(NotAllowedByCredentialHelper.java:67)
         at com.adobe.document.pdf._PDFDocumentStub.setUsageRights(_PDFDocumentStub.java:286)
         at com.adobe.EJB_PDFAgent.setUsageRights(Unknown Source)
         ... 31 more
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:387)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3710)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:139)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
         ... 32 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
    Processing exception during a "UsageRights" operation.
    Request start time: Tue Oct 09 10:51:37 GMT+05:30 2007
    com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_2182850\DM-7168388254160118756.dir\DM-2237897618368579481.tmp
    Specific error information:
    $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights
    General error information:
    IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
    Exception Stack Trace:
    com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_2182850\DM-7168388254160118756.dir\DM-2237897618368579481.tmp
    Specific error information:
    $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights
    General error information:
    IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
         at com.adobe.ads.request.UsageRights.execute(Unknown Source)
         at com.adobe.BaseADSRequest.doWork(Unknown Source)
         at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
         at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
         at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
         at SoapServlet.doPost(SoapServlet.java:51)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.adobe.document.pdf.NotAllowedByCredential: IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0
         at com.adobe.document.pdf.NotAllowedByCredentialHelper.read(NotAllowedByCredentialHelper.java:67)
         at com.adobe.document.pdf._PDFDocumentStub.setUsageRights(_PDFDocumentStub.java:286)
         at com.adobe.EJB_PDFAgent.setUsageRights(Unknown Source)
         ... 31 more
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:374)
         ... 35 more

    Hi Siva,
    If you are developig your form using NWDS, make sure about the cardinality of the context parameter - data Source not 0..1 or 0..n.You may refer similar threads (of same kind of error) in this forum..
    Hope this helps. Assuming you have successfully tested, ADS and the credential file at the ABAP stack, by rurnning the respective ABAP reports.
    Thanks and Regards,
    Anto.

  • Error while running adobe interactive form

    Hi,
    I made a scenario to update a z table using adobe interactive form in webdynpro.While executing I am getting the error as :
    Termination type was : RABAX_STATE
    Can anyone please guide me as to what can be the reason behind this error.
    Thanks in advance !!

    Hi
    I suggest that you first review your configuration using this tutorial which short and to the point:
    [ADS configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
    After that perform the tests that were suggested in the posts above (link to the relevant tests [ADS tests|http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]
    Regards
    Adi J.

  • Adobe Interactive Form is not working - Specify Stream Source

    Hi Experts:
    I am having an issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF in transaction SFP. I'm not sure if this is relevant, except that, I cannot get my custom Interactive form to work.
    All PDF tests in SAP are passing, but being on ECC5.0, I do not have the following programs (among many others):
    FP_CHECK_DESTINATION_SERVICE
    FP_CHECK_HTTP_DATA_TRANSFER
    When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
    Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
    I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
    Also, I know that my credential works because when I test form ISR_FORM_SPEG, I do have interactivity.
    In parsing through the ADS log file of my custom AIF, I noticed the following:
        Parse template node
            Template:
                Source = Stream
                Name = TEMPLATE
    But I believe it should be something like:
         Parse template node
             Template:
                 Source = URL
                 Name = dest:FP_ICF_DATA_<My_System_ID>//sap/bc/fp/form/layout/<My_Form_Name>.
    Does anyone have any suggestions as to how I can change the source of my stream?
    Thanks for your time experts,
    Sean

    Hi Sean
    In the Visual Admin of the server that runs the ADS check under server->services->destinations click on http folder. There should be something under that called FP_ICF_DATA_<sid of backend>. If there is not then create one in there.
    Regards
    Thashin
    Edited by: Thoshin Naicker on Jan 12, 2009 7:09 AM
    Edited by: Thoshin Naicker on Jan 12, 2009 7:10 AM

  • Adobe Interactive Form on BlackBerry device

    Hi,
    I am trying to open an adobe interactive form (generated by SAP and Adobe LifeCycle Designer) on my BlackBerry device.
    Instead of the document's content I get the following message:
    When opening a PDF document containing an XFA form on the BlackBerry 10 smartphone the following error is displayed:
    This document is an XFA form. XFA forms cannot be filled using the Mobile Adobe Reader.
    Is there any possibility to open and maintain the document anyway or what is adobe's strategy regarding this scenario?
    Thanks a lot and best regards,
    Thomas

    They haven't really announced it, because there is no product to announce. Rather the opposite.
    There are no conversion tools, so far as I know.
    XFA forms are a non-starter if you want portability.
    AcroForms are a nightmare in themselves, because the functionality is limited in Adobe Reader and varies between absent and weird in other products. No idea about Blackberry support.
    You will not find a simple recommendation. Rather, you need to use Acroforms and carefully test everything (EVERYTHING: no assumptions) on every platform you intend to support.
    Yes, rather unsatisfactory, but until Adobe realise that the future is platform equivalence or irrelevance, this is where we are.

  • Problem with ACF for Adobe Interactive Forms

    Hi Gurus,
    I had created an adobe interactive form using web dynpro for abap, but I am getting the 500 connection timed out error in the browser when I test the web dynpro application. Where as a normal web dynpro application without adobe form is running successfully.
    The system details are :-
         Adobe LiveCycle Designer 8.0
         NW04S SPS9
         Adobe Reader 9
         IE 7.
    I followed the note 766191 and downloaded and installed ACF(for NW04s and higher version supported upto acrobat reader 9) from browser itself.
    I also followed the note 1150277 for enabling IE settings on ActiveX controls. And I checked in IE with Tools->Internet Options->Programs->Manage Add-ons, but the ACF components were not available.
    Please help me out.
    Thanks in advance,
    Sriratna.

    Hi Aleksandar
    Did you get a solution to this issue
    Im having the same problem, If you have a solution please forward
    Thanks
    Naziem Mahomed

  • Data Passing Problem with Adobe Interactive Forms

    Hello all,
    I am trying to create a Guided Procedure to implement an offline Adobe Interactive form. This form is based on the standard Requisition Request form used in MSS for e-Recruiting.
    I've copied the standard form and updated the layout to ZCI using the appropriate transaction (not manually). After that, I've changed the Interface and layout. But to get the Form in the portal you need to have a .xpd file. Therefore, I've tested the form in preview mode, saved a copy as a PDF file and opened this copy in the standalone Adobe Lifecycler Designer. In the standalone version you are able to save the form as a PDF (not possible using transaction SFP).
    My question 1 is if this is a wrong approach and there is a better way to retrieve the xpd file.
    Next to that, I wrote a RFC function to retrieve data in the backend. This function is working and now I try to pass the data to the Form in the GP (using prefilling). The data is never passed, any points that I need to check there. The data used to export is a structure that contains a number of table types, because Adobe has issues with importing tables it seems. The form is working correctly in the backend.
    Points will be rewarded for helpfull awnsers!
    Kind regards & thanks in advance...

    Check double post

  • Adobe Interactive Forms Runtime Error: Unknown host

    I have installed the NW2004s sneak preview, configured the J2EE services for Adobe Interactive Forms,
    and am trying to test the TravelRequest sample web dynpro  that uses interactive form. I get the following runtime error:
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Severe : PDFDocument is NULL. Exception : Service call exception; nested exception is:
         java.net.UnknownHostException: pwdf3102
         at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:385)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1117)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:40)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    I have seen several message postings similar to this, but none of the solutions seems to fit my case.
    Any ideas?
    Regards, Bob

    Hi,
    i got exactly the same error after installing nw2004s SP07  sneak preview.
    I checked oss note for changing the hostname - without success.
    But now i found the reason. I missed to configure the : "Destination URL for the Adobe Document Services" as described here:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
    Hope this helps.
    Regards
    Matthias

  • Date format convert error in XML interface based Adobe interactive forms

    Hi experts,
    I am using XML interface based Adobe interactive form in Web Dynpro ABAP. The form just contains some date fields and numeric fields.
    When I test the WD Application, the date fields appear like 0000-00-00 at the first time. And then I set the form input disable, and get the XML from the form, at the same time I get the warning message, 'date format convert error'. By the way, I have set the edit pattern, display pattern and data pattern  of the date field to YYYYMMDD, but there seems no effect.
    Could you tell me how to set the default date format in date field Or clear the 0000-00-00?
    And another question, all of the numeric fields in the form appear like 0.0, how can I set it to empty when the form initialize?
    Best Regards,
    Guo Guo Qing

    Hi Chintan,
    Thank you for your reply.
    I have tried every possible changes on the Date field, locale, pattern. But still no effect. When the PDF come up in the WDA program, the date field is still '0000-00-00', and then I export the XML date of the form, there is also '0000-00-00' in the interface field.
    I can't clear the '0000-00-00' in initializiation event using javascript because if I need to open the form again, if I do this, the value user input could be cleared.
    I also try using Javascrip like this
    if this.rawValue == "0000-00-00"
    { this.rawValue = ""; }
    The code above can't clear the initializiation zeros too.
    Have you used the XML interface based online Adobe Forms? I have used XML PDF forms for output before, that's perfect. But the input forms seems so strange.
    Best Regards,
    Guo Guo Qing

  • Blank value added to dropdown list in Adobe Interactive forms

    Hi,
    I see blank value being added to the value list by default to dropdown lists in adobe interactive forms. The real issue is it's being added sometimes as the first value or last value in the drop down list of values which is inconsistent and resulting in Errors sometimes.
    Is there a way by which we can control the position of the blank value added by default(SAP or Adobe) to the drop down lists in adobe interactive forms .? Secondly , Is this a SAP or Adobe upgrade issue since we observed this issue only after recent upgrades ...?
    I am using HCM processes and forms and I am not adding blank value (space) explicitly in my coding of dropdown list values .
    Thanks for your time .
    Sankeerth
    Edited by: SANKEERTH D on Aug 22, 2011 1:46 PM

    Hi Sankeerth,
    The Web Dynpro framework generates a blank entry to the value set of the dropdown listbox if the Context attribute bound to the dropdown listbox is "nullable" (see properties of the Context attribute).
    The dropdown listboxes of interactive forms will be populated with exactly the same data (value sets) as the "native" Web Dynpro dropdown lisboxes.
    For SAP NetWeaver 7 EhP2, there's a Web Dynpro test application (WDR_TEST_ADOBE_ZCI) available, which demonstrates this: Start it and see the dropdown listboxes labeled "Datatype" and "Datatype (nullable)": Both are bound to Context attributes which are of type DATATYPE_D. The only difference is that one of the attributes is "nullable". The dropdown listbox bound to the nullable attribute contains the additional blank entry.
    Watch the native Web Dynpro dropdown listboxes below the interactive form: They are bound to the same Context attributes and contain the same value sets as the dropdown listboxes of the interactive form!
    Regards,
    Ralf

  • Loadrunner 11 and Adobe interactive forms

    I'm currently on-site for SAP Italy and the client wants to use Loadrunner 11 to test a business process that requires Adobe interactive forms.
    eCATT is not acceptable to the client
    Can you advise me if the question about this being possible using Loadrunner 11 has been answered ? Has anyone actually done this using LR and if so would you share details ?
    I note that in the HP Forum that this topic is currently live.
    jc

    Hello Brenda,
    yes, we've tested eCATT with interactive forms. It works so far, but the question is what is the goal of your test?
    Using eCATT ADS, the application, and the business logic behind is tested. If that is your goal, using eCATT is an appropriate solution.
    Regarding Loadrunner-Tests I'm not the expert. But within the solution an ActiveX does posts to the server using encoded URLs. So there are several problems:
    - is loadrunner able to record those posts?
    - is loadrunner able to modify URL parameters dependend on the current session?
    - is loadrunner able to use the response of such a post and dynamically adapt a post parameter of the subsequent post?
    So I think it is at least very difficult and complex to use loadrunner. I recommend eCATT as the solution for automated tests of InteractiveForms.
    Regards
    Stefan

  • Blank page getting displyed whn using adobe interactive forms

    Hi All,
    I am Facing one problem while using Adobe interactive forms in Web Dynpro.
    on deploy interactive form is not getting displayed.
    Deployment result shows blank view....
    m not getting the cause of the problem.
    kindly help if someone knows the cause/solution.
    Thanks,
    Amit

    Hi there,
    I am having the same problem. I deployed the same WD with IF on 2 different machines and there everything works fine. I using the same browser (IE6) on all the machines. Where  are using Native IF and running Adobe Reader 7.0.8. We are on NW04s SP9.
    I tested the ADS Webservice on the machine and that is working fine.....
    Hope somebody can tell me where to look.
    Thx in advance.
    Amit, when you are using IF type "native"  the at least run Adobe Reader 7.0.8. Maybe this solves the problem for you.
    Kind regards,
    Maarten.

  • Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

    Dear All,
    i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
    I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
    Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other  parts of the editor or he wanted to save what he did...
    Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
    Thank you for your help in advance.
    All the best, P. Phil.

    Yes, you need the lifecycle designer installed.  That should be enough to work with the SFP transaction.  But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
    Regards,
    Rich Heilman

Maybe you are looking for