Testing CAD-Desktop interface with CAD-system

Hi,
does anybody know if it is possible to get a CAD-system for free to test the CAD-Desktop interface of SAP?
I am not a key CAD user, I just want to look how CAD Desktop works.
Regards,
Oliver

You do not need CAD system to work with CAD Desktop
call transaction SE37
In Function module enter : CDESK_SHOW
or CDESK_TEST
Fill the import paramenters
Execute it
CAD Desktop will appear

Similar Messages

  • Interface with CAD Software

    Hi Experts,
    Could you plz tell me,
    1) Is there any possibility to Interface with CAD Software ? How ?
    It is too urgent. Plz help me.
    Note : Rewarding high points for helpful answer.
    Thanks & regards
    Murali

    Hi,
    Check this links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d03a090-0201-0010-0597-f87213b26d53
    SAPGUI Failed error while accessing CAD Desktop from UnigraphicsApplication
    CIC and CAD (CTI Integration)

  • Interface with oracle system

    Dear all,
                 I am working on asset tracking process for telecommunication sector.
    here they are maintaining rt now all there equipment data in some CRAMER system basically oracle based system but they are not having any asset tracking system in this.
    My solution for them is creating equipment-asset sync....so that whenever asset is created system will create equip and vice versa...but i hav 2 concerns here:
    1. Can we do many equipment to one asset integration....as this is requirement here....and if we can den how we will handle change in master data wether in equip or asset.
    2. I can't obslete their CRAMER system cause they are having other activities to it also.
        So, I need to make interface with CRAMER that whenever any equoipment is created in the CRAMER parlaely in SAP equipment master data should be created and also asset and vice versa.......
    plz suggest how wud i handle this.....
    thanks in advance
    RManchanda

    Its common to make one or other of the systems the master system, and the other the slave.
    This ensures that the data is created/changed in one system only with a one-way interface.
    Depending how you create the interface, it can be real-time(single record) , or batch (multiple records)
    PeteA

  • Interfacing with Gentran system

    Hi All,
                We have a set up where in SAP interacts with the GENTRAN system both in case of EDI 850 as well as EDI 810. We are using EDI 810 (outbound) for sending the normal (f2) invoices to customer .
    We also have data maps created which GENTRAN uses to read a EDI 810 from SAP system.
    Now we have a requirement where we need to send  the EDI invoices for Credit as well Debit memo. The person working in GENTRAN side says that GENTRAN understands only EDI 812 in case of credit /Debit memos .
    From SAP stand point ,it is pretty easy to just extend the same EDI output type to G2 /l2 so  that the EDI invoices for G2/L2 gets trigerred .But in this case GENTRAN won't interpret it as this will be in EDI 810 format.
    Does anybody know whether there is a seperate functional module for EDI 812 like what we have for EDI 810. If so how to configure this . I don't think I need to do the partner profile configuration again .
    Can anybody share their experience .
    Thanks in advance.
    Shrishar

    Hi ,
             Does anyone has any thoughts on this . I would really appreciate if somebodu could share their experience if they have come across with EDI 812.
    Thanks
    Shridhar

  • Interface with external system

    Hello Experts,
    The query i am posting is very naive and mite seem vague to you but I am doing it for a sure shot methodological approach. My client have an vendor system that they want to interface. All the information I have is
    1> I will get the XML schema frm the guys of that company.
    2> XI is installed in my company.
    Can you tell me wat all things i need to configure and how can i go about achieving this?
    thanks and please advise me,
    Mehta

    Hi Gaurav,
    you will have to provide more details like who is your sender, who is your receiver etc....
    i would recommend that you go through the SAP help documentation and follow the pipeline steps.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    You will have to perform the basic steps to get your thing (XSD) into XI.
    1. In the Integration Builder - Integration Repository; You take your XSD provided by the vendor and create an interface out of it. This depends whether your vendor is sending (Outbound Interface) or receiving (Inbound Interface) the data.
    2. Then add this interface to your service in the configuration (Integration Directory).

  • RFC with External system

    Hi,
    We are trying to develop interface with external system to calculate the shipping costs for a delivery. We will establish RFC connection between SAP and External system.
    Do we need SAP .NET connector to send and receive data from/to SAP. SAO shouls act as client and external system as server. If we have to use SAP .NET connectore, can anyone explain me the detailed process of using SAP .NET connector and connecting to external system.If there is anyother way without using SAP .NET connector, i.e by using RFC function modules, can you please xplain that process too. What is the program ID for RFC destination in SM59?
    I appreciate your help.
    Thanks,
    Ashok.

    setting the program id you need a person with the knowledge of both the system, with the current input it will be difficult to help with that.
    since you are in 4.6C the available options are
    1. DCOM connector
    2. .net connect
    3. JCO
    4. or a plain http call to your external system.
    Regards
    Raja

  • Solution Manager Interface with Tools Outside SAP

    Does anyone have information on Solution Manager's abilities to interface with tools outside of SAP?  I am interested in interfacing Solution Manager with legacy systems and main frame systems (e.g. Informatica).  I am especially concerned with Root Cause Analysis, Exception Analysis, and Error Reporting in Solution Manager regarding non-SAP systems.  Also, if Solution Manager is able to interface with these systems, can it access details from outside SAP (e.g. data from legacy systems)?

    Hi,
    The solution manager can be interface with the ARIS.We did in our project this interface.
    The Business process flow was defined in ARIS & synchronize with the solman & once configuration is done then we reverse synchronize the same to update the ARIS,so you can interface with legacy also.
    Regards,
    Raj.

  • CAD Desktop - error while checking in and storing...

    Hello SAP gurus',
    We have one problem regarding the CAD Desktop functionality, and we believe that you could help us!
    We are doing some tests with CAD-SAP Integration, and when we try to check in document in CAD Desktop, we receive the following error: "Error while checking in and storing c:\...".
    Funny thing is that we can check in originals "manually" in SAP GUI when we open DIR, but when we try to check it in via CAD Desktop it is not possible.
    In some previous posts I have seen that "hosts" file should be maintained properly, but what bothers me is that we are not using real content server yet (we are still in a test phase and we are checking in documents directly to SAP database).
    Does anybody have some idea what could cause this problem?
    Thanks for help guys!
    Regards,
    Karlo

    Hi,
    For viewing the CAD files Content sever will support. The exact technical stuff I don't know.But as per the previous experience I am sure that if you install k-pro your purpose will get fulfilled. The content server feathures you can get and may know the reason.
    But once you install a separate content server instead of the current storage system, your problem will get resolved.
    Regards,
    Ravindra

  • Uses of cad desktop

    Hi Gurus
    Iam confused about the uses of cad desktop.
    I think most of the functions like model/part checkin-out, dir creation, matl creation and bom creation are available in the cad interface itself.
    So i want to know what are the additional advantages we can get with cad desktop apart from the above.
    Best Regards
    Prasad K

    Hi prasad,
    Go thru below link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/e6/56e93ba948ca1ee10000000a114084/content.htm.
    Thanks,
    Swamy H P

  • CAD desktop files export

    Hello,
    We have setup CAD desktop in our landscape for editing CAD documents both from SAP as well CAD environment. Now what we wanted to do is to share documents with our suppliers to help them plan for procurement of new materials(based on new products that we design in CAD). Searched for some standard solution,its not available. Is it possible to send it/export to DMS/cfolders?Share your inputs.

    You can export an assembly from CAD desktop, including the linked materials and material BOMs, to a cFolders system. The system also exports all the originals linked to the document info records.
    For more information, see SAP Note 828084. Export/Import from c-folders to DMS is also a functionality you may wish to explore to fulfil your requirements.
    Regards,
    Pradeepkumar Haragoldavar

  • Concepts Management in CAD DESKTOP

    Hi friends,
    I have a question concerning NPDI for which I am trying to find solution in SAP. Scenario is:
    Initially design team works on 3 concepts in CAD and checks into SAP PLM through CAD Desktop so that reviewer and approver team checks out  data from central content server. DIRu2019s were created before check in and say one concept assembly has 10 parts  then approx some 20-25 components(assuming some parts in common) have been checked in . This will result in 20-25 DIRu2019s.
    One concept is finalized by review/approver team and at this stage; Part numbers are assigned to the assembly and its parts. I will rename the assembly and parts as per the numbers generated from the Number Generation System (External to SAP) and continue with the frozen concept for detail designing.
    We have selected only one concept out of 3 and this has resulted in consumption of say some 10-15 DIRu2019s extra DIR numbers which are not been used and are waste now. If this continuous in all new developments, lots of DIR numbers are consumed which are not being used.
    Can any solution in SAP address this scenario? I have to check in all concepts so that review team will look into it but I donu2019t want DIR to get generated and I guess this is not possible.
    Awaiting for your replies,
    Rgds,
    Sudharshan

    Hello Sudarshan,
    Its perfectly okay to create DIR's for all the parts and designs from the 3 different concepts. The key here is that you are saving all the ideas generated in the concept phase and not only the approved idea. This is a good practice as all the hardwork and equally good ideas that made it to review phase are being saved and can be useful for historic purposes or in future if you want to revisit the unapproved ideas and improvise them you still have them safely stored in your DIR. DIR numbers are expendable but not the hardwork and other great ideas (though these didn't make it to final design)
    You number range should be in the order of 6-7 digits.
    regards,
    N K

  • XI testing for two SAP R/3 systems with same system id/logical system

    Hi
    We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period  for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
    The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time.  I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system. 
    For your information, we have two slds (one for XID/XIQ and second one for XIP).
    What are the options without disturbing & maintaining the current XI system set up?
    1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
    2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
    3) Do we need to refresh cache from time to time in XI ?
    4) Any other implications
    We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
    Any views on this would be highly appreciated.
    Regards
    Chandu

    Hi
    Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
    1)     Original Idoc metadata was deleted from XID
    2)     The port definition  was deleted
    3)     A new port definition was created for new system
    4)     The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
    5)     This brought in all known versions of the idoc segments, including the 7.1 version.
    I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
    Regards
    Chandu

  • Unicode Errors - Interface with non-Unicode 3rd party system

    Does anyone have an experience working with an interface between a Unicode SAP system and a non-Unicode 3rd party system? Would appreciate your input on existing data declaration and logic (prior to SAP Unicode conversion), if changes need to be made to the character types and upload/download functions.
    We are doing our testing in a newly converted Unicode system which has interface sending files through SAP Business Connector, and uses TDAccess/COMM-PRESS to encrypt the payment file.
    We are getting an COMM-PRESS error that it's not able to get the private key
    ERR=>RC=107#Error building signature segment (S1A/S2A) ERR=>#Error getting private key: #PUBLIC KEY FINGERPRINT = , rc = 524
    The issue seems to be that the passphrase is not received correctly in COMM-PRESS (codepage 1100) from Unicode SAP (codepage 4102). The passphrase is uploaded from a text file (codepage 1100?) to T_PPLOC and then to W_PPLOC.
    TYPES: BEGIN OF T_PPLOC,
             FLINE(64) TYPE C,
           END OF T_PPLOC.
    DATA: W_PPLOC(64)  TYPE C
    CALL FUNCTION 'GUI_UPLOAD'
          EXPORTING
            FILENAME                = W_FILENAME
            FILETYPE                = 'BIN'
          TABLES
            DATA_TAB                = T_PPLOC
        LOOP AT T_PPLOC.
          IF W_PPLOC IS INITIAL.
            MOVE T_PPLOC-FLINE TO W_PPLOC.
          ELSE.
            CONCATENATE W_PPLOC T_PPLOC-FLINE INTO W_PPLOC.
          ENDIF.
        ENDLOOP.
    Comparing the results between a Unicode and non-Unicode system, the uploaded passphrase is different because of the codepage. But even if I convert the passphrase first from 1100 to 4102 codepage, it still fails.

    Hi,
    Try this by sending value to the CODEPAGE parameter of the function module GUI_UPLOAD.
    aRs

  • UCCE 7.5.8 with CAD Agents sitting in India

    Hi all,
    I've got a scenario and am looking for some inputs.
    I've got a centralized CUCM 7.1.3 with UCCE 7.5.8 and CAD 7.5.8. Today I only phones at our India office and all is working perfectly fine with no issues. I am looking into having CAD agents sitting at this office connecting UCCE environment back in California. I've done some testings with CAD agent installed in India and so far all is looking good. It takes about 60-80 seconds from the CAD login screen to completely login to CAD.My concern is the round-trip delay between Ca and India, it's about 290-300ms round-trip.
    Questions:
    Has anyone successfully deployed this type of scenario ? please share your experience !!!
    Has anyone used WAAS to help accelerate CAD login process ?
    Thanks in advance !!! and I appreciate any inputs/suggestions
    D.

    [email protected] you know if CAD supervisor can monitor agent using CTIOS desktop ?
    Here is your answer I hope it is useful for you .
    UCCE 8.5 SRND page 198
    Support for Mix of CAD and CTI OS Agents on the Same PG
    Unified CCE deployments can support a mix of CAD and CTI OS agents on the same PG. If a mix is deployed, the sizing limitations of CAD apply.
    Note that Cisco Supervisor Desktop (CSD) can monitor only CAD agents, and the CTI OS supervisor application can monitor only CTI OS agents.
    Cisco Agent Desktop, Supervisor Desktop, and CTI OS cannot co-exist with Cisco CallManager PG; the configuration of agents and supervisors must be kept separate. Cisco Supervisor Desktop cannot be used to monitor a CTI OS agent desktop, nor can a CTI OS supervisor monitor a Cisco Agent Desktop agent.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/srnd/5x_6x/c5desktp.html
    Regards
    Irfan Tariq

  • Overheating MacBook running Windows XP with CAD program

    Every time I run the Autosketch program with Windows XP, the laptop overheats and the fan becomes extremely noisy. The over heating occurs only when in Windows.
    What can I do to overcome this problem?
    Thanks for your assistance.

    welcome to windoze.
    you'll have to contact the software vendor, it's their app doing it, must be running the CPU / GPU pretty hard. My guess is that the fix is probably a desktop machine with good power & cooling.
    tho a good machine, macbook is a consumer oriented machine that wasn't designed to run pro CAD software.
    Message was edited by: kmac1036

Maybe you are looking for

  • Photoshop Elements and Windows Live Mail :(

    Had Adobe come out with a patch yet to fix their oversight regarding WLM?  Windows 7 had WLM and you can't get PE to send photos to WLM.  It's very disappointing.  I hate to abandon my favorite photo email software for something that works......  but

  • Correlation property of correlationSet "name" is not defined

    Hi. I have got strange problem with correlation property. I am using JDeveloper Studio Edition Version 11.1.1.5.0 with Oracle 11g Fusion middleware Version 11.1.1.5.0. I created BPEL process driven by EDA. All receive and pick activity are event driv

  • Downloading ...

    I keep getting msg saying I need to update my Adobe Flash.  When I do I get msg saying I have a newer version already installed. Any download is "unsuccessful".   I keep going in circles and can't view anything.    Thhis is a recent situation.    Win

  • Configure Sap NetWeaver MDM with Sap Netweaver XI

    SAP NetWeaver MDM communicates with SAP NetWeaver XI by writing an XML file into a directory on a file server. Can someone gives me  an idea about the path of this file server? How can I configure it?

  • How to get itemChild Array from plist into table 2 ?????

    Hi there, I am creating a project for the IPhone, using UITableViews. I have been looking at James' code and trying to adapt it. My project has two tableviews, and two tableview controllers. THe plist is an Array of dictionaries and each dictionary h