Text "disappearing" on run of symfony build commands

When I run a symfony build command using the Leopard Terminal.app, I get disappearing text as if the output is sending escape characters to change the text or something--but the color of the text is the same as the window, so it's effectively invisible.
I made a screencast and put it up here:
http://media.notbrain.com/terminalTextDisappears.mov
What happens:
Run command
Text disappears after several lines of output
Reappears for a little bit
Disappears for the bulk of model generation
Reappears at the end
After it runs I scroll back up to the top and triple click in the area of the first invisible text to show it's there, just the same color as the bg. Then I scroll down and triple click on more spots, then click once to make it go back to invisible. Strange.
Thanks!

More on this issue here:
http://www.nabble.com/Some-output-not-displayed-on-OS-X-Leopard-td13537590.html
and
http://www.phing.info/trac/ticket/222

Similar Messages

Acrobat 5.0.5 text disappears in Free Text Tool

Ok it's an oldie, but it's a goodie. I love my Acrobat 5.0.5, and never had any reason to upgrade. Well once. From 5.0 to 5.0.5. I have used my license on three different machine builds. 95, 2K and now XP Pro 64 bit and it still works great. (Yes, this program has outlived 2 older computers!) Well. Until yesterday. Suddenly when I create a free text box, and type in there, the text disappears. This happened once before a few years back, and I have forgotten what the fix was, but I do believe that was why I upgraded from 5.0 to 5.0.5. Now it is happening again.
Now for the real kick in the pants. I tried to reinstall my product, thinking to correct the problem, and all of a sudden Adobe doesn't like my several years old serial number. I get the error message that it isn't valid. And it IS a valid license, just a really OLD one. I only used it for the latest install of this, my same program, about a year ago, maybe a little more than a year.
I tried to just run the 5.0.5 update program again and it says the program isn't even installed to update. What the heck? OF COURSE IT IS.
I'm very frustrated and disappointed, as this is an old favorite of mine and I hate to think that Adobe has rused it so that it just won't work anymore to force me to purchase a newer version, when I didn't need a newer version.
If someone familiar with this old version of Acrobat could help me resolve this issue, I would very much appreciate it. Thanks in advance.

The 64 bit OS can run most 32 bit applications just fine if you set it up right, and as I stated, this issue is not a compatibility issue, but a recurring issue within the application itself that also plagued me once upon a time when I ran it under Win 2k. Apparently an Adobe bug, and I suspect it is more related to the forced download of an updated version of the basic acrobat reader (due to Adobe inflicted browser issues) than it is with a Windows update. In my case, I set all of my old 32 bit applications up on a separate drive. I never default install programs on the main OS drive if it can be helped. Some of them I have to click the actual application *.exe or shortcut, because "open with" absolutely will not work, even if it is set as the default application for certain extensions. You will get an error message about it not being a valid Win32 application. From the program itself, however, once it is launched, it is never a problem to browse to and open the correct data file.
I even went so far as to install the Adobe basic reader when I was forced to do so, on a completely separate drive from my Acrobat 5 because I am well aware that previously caused problems as well, and never EVER let the application make its automatic updates from Adobe.... EITHER of them, actually. I suspect it was one of those snuck through and not a Windows update that caused it, although the possibility exists, I suspect Adobe does whatever it can to sell more software.

Error running SQL and EXEC commands in parallel

Dear Gurus,
We are applying 3480000 and in process as soon as workers start it come out of adpatch session and give su the following error:
************* Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sun Sep 02 2007 23:11:01
APPL_TOP is set to /sgmtemp/prodappl
Worker process 4 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
Starting phase 0 (A0): first
There are now 98197 jobs remaining (current phase=A0):
0 running, 123 ready to run and 98074 waiting.
Assigned: file adsysapp2.sql on worker 1 for product admin username APPLSYS.
Assigned: file cssruwq1.sql on worker 2 for product cs username CS.
Connecting to CSD......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT CSD/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
3 workers have quit. Waiting for 1 more.
All workers have quit.
Error running SQL and EXEC commands in parallel
You should check the file
/sgmtemp/prodappl/admin/msbep004/log/3480000_sbm3.log
for errors.
applmgr@21:/sgmtemp/Oglupgr/3480000>
What could be the issue, i tried to connect CSD/CSD in sql and it connected.
Thanks in Advance
Regards
Kiran Rana

Hi Gurus,
Even i tried to recreate the FND_GLOBAL by performing the following, but still no luck:
output for scripts hearder value in FND_TOP:
applmgr@21:/sgmtemp/prodcomn/temp> cd $FND_TOP/patch/115/sql
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> grep Header AFSCGBL*
AFSCGBLB.pls:/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
AFSCGBLS.pls:/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
Output for script header value in Database:
SQL> select text from dba_source where name='FND_GLOBAL' and line <5;
TEXT
package FND_GLOBAL as
/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
package body FND_GLOBAL as
/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
8 rows selected.
We tried to re-apply 4 hours back when one of the support personnal ask use to run those
scripts. one of them went with out any errors but second one went with errors
as follows:
First Script @AFSCGBLS.pls
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLS.pls
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:24:10 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
DOC> | Copyright (c) 1993 Oracle Corporation Redwood Shores, California, USA|
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFSCGBLS.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL specification for package: FND_GLOBAL
DOC> |
DOC> | NOTES
DOC> | This module is called by AutoInstall (afplss.drv) on install and
DOC> | upgrade. The WHENEVER SQLERROR and EXIT (at bottom) are required.
DOC> |
DOC> | HISTORY
DOC> | June, 1999 - Added function AUDIT_ACTIVE, bug 879630. Jan Smith.
DOC> | 11/19/01 MSkees - Added DBDrv line and 'SET VERIFY OFF' for ARU auto
DOC> | generation bug 2047263 build
DOC> |
DOC> *=======================================================================*/
Package created.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Second Script AFSCGBLB.pls:
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLB.pls <
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:27:15 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Warning: Package Body created with compilation errors.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 -
Production
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql>
The second script (AFSCGBLB.pls) run's out with errors and changes status of almost 15000 objects as INVALID in database.
Regards
Kiran Rana

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Text disappearing in pdf file

I received a word file that was converted to pdf using "pdf maker". In the word file there is "shading" behind the text. In the pdf file if I select portions of the text and try to "highlight" it to make comments, some of the text disappears. (The text actually goes behind the "shading" so that you can't see it). If I use the "touch up object" tool in Acrobat professional, I can select the "shading" and delete and see the text underneath. Does anyone know why this is happening? Thanks

I have run into this problem myself. I have been able to use the object selection tool (In Acrobat 8 Pro) to select the box in front of the text and delete it without also deleting the text.

Text disappearing in pdf when re-ordering tags

I have a pdf (Acrobat 8 Pro), and I have created it as a tagged pdf in InDesign CS3. However, when I convert it to the pdf, the order of the tags changes, so that I need to use the Touchup Reading Order tool. When I do this, however, text disappears. The text in the ID file is in an opaque text box, and what is actually happening when I re-order in Acrobat is that the text is moved behind the opaque box so that it is no longer visible, but it still appears in the Order dialogue box.
However, in ID, they are one object - it is a text box containing text, not a separate opaque box behind the text. Otherwise I might try tagging the box as an artifact and see if that works. Theoretically, I could select it in Acrobat to tag it as an artifact, but the selection tool only allows me to select rectangular areas, and so it selects both the opaque box and the text behind it.
Any suggestions?
Win XP

I have run into this problem myself. I have been able to use the object selection tool (In Acrobat 8 Pro) to select the box in front of the text and delete it without also deleting the text.

Flash CS6 Text Disappearing

I have been using Flash CS6 running on a Windows 7 work laptop since January. Not a single problem until last week.
Say I have a text box inside a banner symbol. The text says "WELCOME". Normally you click the symbol to edit in place, click the text box and you get a blinking cursor where you can change the text to "HELLO". You click the stage to back out of the text and the symbol and every thing is good. Now you have a banner that says HELLO.
Here is what I am getting as of last week:
I click the symbol to edit in place. When I get to the level where the text box is located, the text disappears. If I click around eventually it will select the text box containing "WELCOME" but the text box now appears down and to the right of where it actually is. When I double click to edit the text box, the text is now visible and back in the right spot. Once I change it to HELLO and click out of the text box, the text disappears again. If I return to the main stage, the symbol still says "WELCOME" but once I render the new word "HELLO" shows in the SWF.
Ever seen that? Our IT department has jacked with it and can't fix it. I am waiting for someone to come back and re-install Flash to see if that fixes the issue. The only other thing I have noticed is that if I start a new project as AS3, add text directly to the stage, it causes the same problem. But if I start a new project as AS2, it's fine and with no text issues. I can't find anything online about this issue. Wondering if I have an AS3 setting wrong or a corrupt library file.

try resetting your preferences, FAQ: How do I reset Flash professional to default configurations and preferences?

Unable to run Oracle Form Builder from Designer 10g

I am using Windows XP with Oracle Designer 9.0.4.5. From Design Editor, I select Run -> Oracle Forms, nothing happen. I am able to open Form Builder manually (C:\ORACLE\904\bin\ifbld90.exe). After I generated a module (form) from Designer, I have to open the FMB manually from Form Builder. In Designer 9i, I am able to open Form Builder from Designer. Is this a bug for Designer 10g?
Thanks,
Jim

Thanks for the response, Suresh,
I believe this is an installation/configuration issue.
I installed Oracle Developer Suite 9.0.4, which includes Form Builder, Report Builder, and Designer. System Path contains the ORACLE_HOME (c:\oracle\904\bin). I am able to start Form Builder from DOS command (ifbld90.exe). I am also able to start Report Builder (rwbuilder.exe) and Designer (des2k61.exe) from DOS. I am able to Run Oracle Report Builder from Designer, but just not Form Builder. I also checked the Windows registry settings and they seem alright to me.
thanks,
Jim

TextArea and TextInput on mobile device the text disappears and works fine on desktop

I'm developing a mobile app with a view that contains 1 Text Area, 1 Text Input and a group of 3 buttons. The app runs well in Desktop mode ( Run & Debug ), but when run in an android device ( Sony Tablet S) when the view is loaded, the text (text property set at design or runtime) "flashes" and disappear, if I change the device orientation of the tablet (phisically) the text draws correctly and don't disappear, even if you return to the original orientation. Also, if I pop-up a message (SkinnablePopUpContainer) in the same view, the text appears, and when I close the pop-up the text disappears again.
Is this an identified bug ? ... is there a workaround ? ... I tried to set visible property to false and true and sometimes it works and sometimes not at random.
Thank you for you help.

UPDATE : if I set Focus=true the text appears. I think that the text should be there even if I don't set focus.
This simple code when run in the device (Sony Tablet S) doesn't work as expected ... ( the text in the textbox dissapears, and if you change orientation appeears).
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark" title="Editar acción"
                    xmlns:dao="dao.*" creationComplete="view1_creationCompleteHandler(event)" >
<fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected function view1_creationCompleteHandler(event:FlexEvent):void
                                        txt1.text="Hola";
                                        txt1.validateNow();
                                        txt1.setFocus(); // <---- if not set the text "Hola" flashes and dissapear.
                    ]]>
</fx:Script>
          <s:TextInput id="txt1" x="26" y="44"/>
</s:View>

[SOLVED] Unable to build packages from AUR (build: command not found)

I recently hosed the filesystem on my arch install of ~8 months. I reinstalled arch today and didn't have many problems since I had backups of many important config files. Anyways, I still need to get a few programs installed from AUR, but nothing I get from AUR will build.
I download the tarball, extract into a folder in /home/myuser/builds and then go into that folder and run makepkg -s (as always)
It checks the files and extracts/downloads them. Then I get the following error message:
==> Starting build()...
/usr/bin/makepkg: line 741: build: command not found
==> ERROR: Build Failed.
Aborting...
I've run abs and I checked out the abs wiki page, I've also installed base-devel. I am not sure what else I need to do, the error message is not specific enough.
The packages I have been trying to install are ttf-ms-fonts 2.0-7, keepass 2.14-2, and I also tried ttf-vista-fonts 1-3. I am fairly certain that it is not a problem with the PKGBUILD files.
Any ideas? Thanks!
Last edited by fatjake (2011-03-08 01:02:59)

cyrus wrote:Have you tried Yaourt?
Nope, haven't tried that, I think mainly because I wanted to learn how to use pacman and how to build using ABS. At this point I think I know how to use pacman/abs, as much as this thread might make it appear that I dont
I'll give it a try, as I frequently install software from AUR. In the past I think I let software from the AUR get outdated, Yaourt (clumsy name) sounds like it would help that a bit. Thanks!
Edit: BTW, I really love Arch. I tried it out on a flash drive about 8 months ago (maybe more), and after about 12 hours I was sold and installed it on the drive that Windows XP previously held. Even considering that I had many problems during the initial install, but they were all problems that caused me to learn and were easy to resolve. Seriously, I have lots of Windows tech experience, but only Arch forced me to learn Linux. I had tried Ubuntu previously but it was such a bore, and the problems tended to be hard to find solutions for. I try to convince my other Linux using friends to try arch, but they see it as too hands-on. I don't see it that way, it is very hands off after initial configuration, and the initial config only takes a week or less on the first try and a day and a half (or so) if you re-install. Having backups of your config files is of course a huge deal, and I am glad I had most of those.
Really, I love Arch Linux, it has taught me so much.
Last edited by fatjake (2011-03-08 04:25:15)

MSTest not running in TFS build but tests works fine locally in visual studio

Hi Team,
I have 18 unit tests in my test project wanted to run in TFS build. But build says no tests to execute. please find the below details and images for more info.
Even MSTest command is not working.
TFS : 2010
BUild Server has visual studio 2010 ultimate with SP1.
Thanks in Advance,
Shree
$hree

Hi Shree,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to run JavaFX scene builder

I'm trying to run JavaFX Scene builder on Windows XP, 32-bit. Java version 1.7.0_07. I can't run it both with or without IDE (Netbeans 7.2, JavaFx Scene Builder home is stated). Nothing happens after a double-click. The problem might be in versions conflict, because previously I had 1.7.0_03, but now I uninstalled it and problem remains the same.

I have the same problem.
scenebuilder.properties:
Version = JavaFX Scene Builder 1.0
BuildInformation = Version: 1.0-b50, Changeset: 22db15834430
Date = 2012-08-07 16:33
Java version:
java version "1.7.0_07"
Java(TM) SE Runtime Environment (build 1.7.0_07-b11)
Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode)
I can build and run the examples in Netbeans 7.2
When I run the scenebuilder.exe I get the following text in a "cmd" window:
No suitable 64 bits Java Runtime Environment (JRE) found : it must be
Java 6 Update 29 or above
OR
Java 7 Update 2 or above
Press <ENTER>...
I'm running Windows 7 Pro 64-bit SP1
Thanks in advance!
Jon

Can SQL*Loader be run in Form Builder of Developer/2000?

Hi,
I have to use sqlldr everyday to import billing data into DB.
I really don't want to run it in command line.
Help me!
If posible, tell me how to make it run in Form Builder.
Thank in advance,
Quang

forms allows you to execute an OS command . whatever the command you want , can execute using forms

Adobe Reader X text disappears

I have a user that will have open 3 or 4 PDF's in Adobe Reader X. When the user starts flipping between the PDF's. the screen starts to go dark and the text disappears on one or more document until it's closed out and reopened. The PDF's are about 300 pages each of text. I did all updates to windows and to adobe and it still happening. The computer is running Windows 7 32bit. It's a Dell 980 with 4GB of RAM. Any advice would help.
Thanks.

Is there something special about a pdf/a doc?

DAC Generate Parameters and Build Commands

Hi everyone,
Can someone explain the differences between the generate parameters and the build commands?
My initial thought was that generate parameters generated the Informatica parameter files. But then I couldn't figure out what the purpose of the Build command was.
Any clarification would be appreciated. Thanks!
-Joe

When you see your ETL folders they are arranged depending upon the type of tasks SDE, SIL, PLP, etc. If you buy the OOB Oracle BI Apps they come with prebuilt ETL routines. These are meant to plug and play as adaptors depending on your source. The product also allows you to extract data from multiple sources hence different SDE folders. These are then assigned to Logical Folders in DAC. Every task you created is linked to an ETL workflow and is assigned to a Logical folder.
Now the workflows can be run manually from the ETL Tool or through DAC. When you run them to DAC it uses the Source and Target connection parameters from the Physical Data Sources tab in the Setup section denoted by the $ sign.
Generate Parameters looks at every task in your execution plan and checks what the $Source & $Target Parameters it needs. If your plan has SDEs, SILs, PLPs and then come from three sources (2 OLTPs, 1 Flat file) and 1 destination (DW) then you'll get 4 connection parameters, plus every folder associated with your ETL tasks. e.g SDE_ORA11510_Adaptor, SILOS, PLP, CUSTOM_SDE_ORA11510, CUSTOM_PLP, CUSTOM_SILOS. Then you can set which source you want to extract from and which target you want to send your data to.
Build on the other hand handles the dependencies. It is very important you set your Source Tables, Target Tables and the Task type at every task appropriately. It uses this to logically arrange the concurrency and dependencies of tasks.

Text "disappearing" on run of symfony build commands

Similar Messages

Maybe you are looking for