Text Field over Text in Table Cell

When I drag a new text field to a table cell that contains text the field automatically fills the cell and overwrites the text. Can I put a field over the text in a specific position and how do I do it? (See Screen shot)

Thank you for the idea bruce. I did try that and tried it again just now. I've attached a screenshot of the result. It fills the cell and gives me a blue outline with no resizing nodes. I must be missing something on how to resize the subform. Any more ideas?

Similar Messages

Multi-coloured text in table cell

I have a table where individual cells can have multi-coloured text. To do this I use html when I set the text in a cell renderer. It works fine. However, when the column width is too narrow for the text then the text is wrapped. If the text is not html then the text is not wrapped.
How can I keep the different colours but make sure the text is not wrapped?
Thanks

I never want the text to wrap even if the column width is too small for the text.
If the text of the renderer was set to abcdefghijklmnand the column is only large enough to show the first 10 chars then the user (obviously) would only see the first 10 chars.
If I now set the text to <html>abcdefghijklmn</html> then, assuming the column is wide enough, the user will see all the text but cde is shown in red.
However, if the column width is now changed so there is only room to show the first 10 chars then the user will only see abcde not as I would hope abcdefghij

Mail.app: text in table cells in incoming formatted mail - problems replying

MacOS 10.9.2
mail.app 7.2, threading enabled
Sometimes I receive a formatted email that is really difficult to reply to, when I want to intersperse my reply text among the incoming paragraphs.
The trouble occurs when multiple incoming paragraphs are grouped. I can’t open up vertical space for my reply text inside the groups.
If I click anywhere in the group, mail.app marks the group with a surrounding rounded-corner grey rectangle, with a X-in-a-circle “close icon” at the upper left corner.
When I look at the raw source of the incoming message, I see that the groups correspond to table cells, that is, the sending mail client enclosed the paragraphs within a <td> … </td> pair.
The sending email client is sending me a table, for no clear reason — the group doesn’t correspond to anything obvious in the message thread.
I’m guessing we won’t ever know why some email clients group paragraphs like this, but I’d like to do my best to adapt, so I can keep up with my incoming email.
Yeah, I can ask my correspondents to use a different email client, or perhaps different settings in the same client, but except for the few tekkies among my correspondents, this isn’t really practical. I can also ask my clients to use unformatted messages, but THAT is a whole different issue, and frequently isn’t practical, either.
My questions:
Q1: What’s the point of the grey rectangle and the “close icon”? (Is this mail.app’s way of saying, “I received this crazy formatting, almost impossible to process, so I’m making it easy for you to just delete the whole mess”? Or what?)
Q2: Is there any SIMPLE way to untangle (modify or remove) these groupings within mail.app? (I guess I can access the raw html, copy-and-paste it into another app, modify it, and paste the results back into my reply. Yuck!)
Q3: Am I missing a really obvious work-around or fix?
TIA

In your question, you indicated that you are running Firefox 8. Is that correct? It might be difficult to diagnose issues with that version because most people have moved on to Firefox 12 (plus or minus 1 version). Can you upgrade?
It's hard to think of a reason that ordinary text or links in ordinary text would not display. For embedded images or videos, one possibility is a difference in the protocol, i.e., HTTP (not secure) versus HTTPS (secure).
Hopefully someone else will have a better guess (or actual knowledge!).
Regarding the blue lines in a message, that usually indicates the earlier message was forwarded a few times. I don't know whether Gmail will let you reformat that area or whether you have to clean it in another application (e.g., for plain text, in Notepad) and paste it back in.

Dragging Text in Table Cell

In older versions of Pages, dragging text from a table cell into another table cell would cause the 2 cells to swap text. In '09 the dragged text overwrites the text in the cell it's dropped into. Is there a way to go back to the old way?

No not that I know of.
I have tried all the possible keyboard combinations and none do what you want.
Peter

Set text in table cell to bold

I am trying to get the text in a table cell to alternate between plain and bold on a ctrl-click.
The setFont() statements seeming have no effect.
Can anyone help?
Self Contained thing here:
package boldTableCell;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.UIManager;
import javax.swing.table.DefaultTableModel;
public class MyTable extends JTable implements MouseListener {
 private boolean isBold = false;
 private String[] columnNames = {"First Name", "Last Name", "Sport", "# of Years", "Vegetarian"};
 private Object[][] data = {
 {"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
 {"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
 {"Kathy", "Walrath", "Knitting", new Integer(2), new Boolean(false)},
 {"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
 {"Philip", "Milne", "Pool", new Integer(10), new Boolean(false)},
 * constructor
 public MyTable() {
 super();
 DefaultTableModel defaultTableModel = new DefaultTableModel(data, columnNames);
 this.setModel(defaultTableModel);
 this.setName("My Table");
 setListeners();
 * set listeners
 private void setListeners() {
 addMouseListener(this);
 // on ctrl-click in variable column, flip bold/not bold
 @Override
 public void mouseClicked(MouseEvent event) {
 System.out.println ("mouseClicked(): # of clicks: " + event.getClickCount());
 // ctrl -click
 if ((event.getModifiers() & ActionEvent.CTRL_MASK) > 0) {
 System.out.println("ctrl-click");
 Point point = event.getPoint();
 int row = rowAtPoint(point);
 int column = columnAtPoint(point);
 // if not valid then return
 if ( row < 0 || column < 0) {
 return;
 // if this click was on the variable column
 if (column == 0) {
 System.out.println("ctrl-click on column 0 ");
 Component component = super.prepareRenderer(this.getCellRenderer(row, column), row, column);
 // now get the current font used for this cell
 Font font = component.getFont();
 isBold = ! isBold; // flip boolean
 if (isBold) {
 System.out.println ("ctrl-click: bold: " + isBold);
 component.setFont(font.deriveFont(Font.BOLD));
 component.setForeground(getForeground()); // otherwise text disappears
 // (JLabel)t.getHeaderRenderer()).setFont(new Font(("Courier", Font.BOLD, 12));
 else { // not bold
 System.out.println ("ctrl-click: not bold: " + isBold);
 component.setFont(font.deriveFont(Font.PLAIN));
 component.setForeground(getForeground()); // otherwise text disappears
 component.invalidate();
 component.repaint();
 this.invalidate();
 this.repaint();
 } // end if click on definition column
 } // end mouseClicked
 @Override
 public void mouseEntered(MouseEvent arg0) {
 @Override
 public void mouseExited(MouseEvent arg0) {
 @Override
 public void mousePressed(MouseEvent arg0) {
 @Override
 public void mouseReleased(MouseEvent arg0) {
 * @param args
 public static void main(String[] args) {
 try {
 UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
 catch (Exception e){
 e.printStackTrace();
 final JPanel jPanel = new JPanel();
 final MyTable myTable = new MyTable();
 jPanel.add(myTable);
 final JFrame frame = new JFrame();
 frame.add(jPanel, BorderLayout.CENTER);
 frame.setTitle("My Panel");
 frame.setPreferredSize(new Dimension(400, 150));
 frame.addWindowListener(new WindowAdapter(){
 @Override
 public void windowClosing(WindowEvent e) {
 frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
 frame.setLocation(300, 200);
 frame.pack();
 frame.setVisible(true);
}Edited by: allelopath on Jul 8, 2010 11:06 AM
Edited by: allelopath on Jul 8, 2010 11:07 AM

got it
package boldTableCell;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.util.ArrayList;
import java.util.List;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.UIManager;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
public class MyTableWithCustomRenderer extends JTable implements MouseListener {
 private boolean isBold = false;
 private List<Boolean> isBoldList;
 private String[] columnNames = {"First Name", "Last Name", "Sport", "# of Years", "Vegetarian"};
 private Object[][] data = {
 {"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
 {"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
 {"Kathy", "Walrath", "Knitting", new Integer(2), new Boolean(false)},
 {"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
 {"Philip", "Milne", "Pool", new Integer(10), new Boolean(false)},
 * constructor
 public MyTableWithCustomRenderer() {
 super();
 // initialize bold for each row to false
 isBoldList = new ArrayList<Boolean>(5);
 for (int row = 0; row < 5; row++) {
 isBoldList.add(row, false);
 DefaultTableModel defaultTableModel = new DefaultTableModel(data, columnNames);
 this.setModel(defaultTableModel);
 this.setName("My Table");
 setListeners();
 * set listeners
 private void setListeners() {
 addMouseListener(this);
 // on ctrl-click in column 0 , flip bold/not bold
 @Override
 public void mouseClicked(MouseEvent event) {
 // ctrl -click
 if ((event.getModifiers() & ActionEvent.CTRL_MASK) > 0) {
 System.out.println("mouseClicked(): ctrl-click");
 Point point = event.getPoint();
 int row = rowAtPoint(point);
 int column = columnAtPoint(point);
 // if not valid then return
 if ( row < 0 || column < 0) {
 return;
 // if this click was on column 0
 if (column == 0) {
 isBoldList.set(row, ! isBoldList.get(row)); // flip boolean for this row
 this.invalidate();
 this.repaint();
 } // end mouseClicked
 @Override
 public void mouseEntered(MouseEvent arg0) {
 @Override
 public void mouseExited(MouseEvent arg0) {
 @Override
 public void mousePressed(MouseEvent arg0) {
 @Override
 public void mouseReleased(MouseEvent arg0) {
 @Override
 public Component prepareRenderer (TableCellRenderer renderer,int row, int column) {
 Component component = super.prepareRenderer(renderer, row, column);
 // now get the current font used for this cell
 Font font = component.getFont();
 if (column == 0) {
 if (isBoldList.get(row)) {
 System.out.println ("prepareRenderer(): ctrl-click: bold: " + isBold);
 component.setFont(font.deriveFont(Font.BOLD));
 component.setForeground(getForeground()); // otherwise text disappears
 else { // not bold
 System.out.println ("prepareRenderer(): ctrl-click: not bold: " + isBold);
 component.setFont(font.deriveFont(Font.PLAIN));
 component.setForeground(getForeground()); // otherwise text disappears
 return component;
 * @param args
 public static void main(String[] args) {
 try {
 UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
 catch (Exception e){
 e.printStackTrace();
 final JPanel jPanel = new JPanel();
 final MyTableWithCustomRenderer myTable = new MyTableWithCustomRenderer();
 jPanel.add(myTable);
 final JFrame frame = new JFrame();
 frame.add(jPanel, BorderLayout.CENTER);
 frame.setTitle("My Panel - Custom Renderer");
 frame.setPreferredSize(new Dimension(400, 150));
 frame.addWindowListener(new WindowAdapter(){
 @Override
 public void windowClosing(WindowEvent e) {
 frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
 frame.setLocation(300, 200);
 frame.pack();
 frame.setVisible(true);
}Edited by: allelopath on Jul 8, 2010 2:07 PM

Styled Text in Table Cell

Hi,
I've got this problem: I'd like to insert a styled text in some cells of a JTable.
The text should be composed of two kinds of Font, to emphasize some characters in it.
Suppose I've done a class Test, that extends JPanel. In this class I've done a method appendChar(String c, boolean bol). With this method I can add a JLabel with only a single char (String of length 1) at a time. If bol is true, it emphasizes the char; if false, it uses the "default" font. For example:
"this is an example"
This class works fine, but I don't have any idea on how I could be able to insert a Test instance in a JTable cell.
I think I should create a class that implements TableCellEditor, or extends DefaultCellEditor.. but I don't know how this should be done.
If there is some other way to have some styled text in a table cell, tell me!

Hi,
AFAIK, the default renderer for a table cell is a JLabel in which you can display styled text using html. You would need to provide a custom editor only if the default textfield doesn't fulfil your needs. For rendering, you need to override the renderer.
Cheers,
vidyut

Copy text in table cells Framemaker 10

I want to copy the content of several table cells in an other table of the same document. How can I do this so that the text is copied in several cells again and not all the content in only one cell?
Margot

Normally, just make sure you select the same array of cells in both source and destination table. If they don't match, geometrically, it may not work. This might happen, for example, if you have a straddle in one but not the other.
If the tables need to have identical content for some cells going forward, consider having the clone table's cells populate the shared cells with cross-references, by paragraph text, to the master table. Then if the master table changes, so does the clone.

Inserting text into table cells in Powerpoint

Hi
I have a named table ClientInfo on Slide 3 in Powerpoint. How can I programmatically insert text into the table's cells?
Thanks
Regards

Hi Yahya,
What did you mean named table? Did you mean the name of shape?
If I understood correctly, we can use table object to manipulate a table shape on a slide. And here is a sample to insert text into the first cell for your reference:
Application.ActivePresentation.Slides(3).Shapes("ClientInfo").Table.Cell(1, 1).Shape.TextFrame.TextRange.Text = "Hello"
Also here are some helpful links for learning PowerPoint developing:
How do I... (PowerPoint 2013 developer reference)
Object model reference (PowerPoint 2013 developer reference)
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[CS2-JS] Error when inserting some text in table cell via XMLElement

I have a very very strange InDesign behaviour when using XMLElement in a table Cell to insert a string.
For example (in a table that has an XML structure) :
var cell = table.cells[0];
var cell_xe = cell.associatedXMLElement;
var newtag_xe = cell_xe.xmlElements.add("mytag", null);
// Up to now, no problem
// Then I use only one of these following instructions at a time :
newtag_xe.contents = "existe en 4,57 x 1,07 m"; // Gives an InDesign error "Object is invalid"
newtag_xe.contents = "existe en 4,57 x 1,07 "; // Works fine
I have a lot of other examples of that kind (not only failing on the last character). InDesign accepts (randomly, it seems) some strings and rejects some others, and no logical rule seems to emerge.
Anyone with the same problem ?

Hi Cyril,
re: "This is where I think InDesign is really not fair : myTextFrame.tables.length == 0 if the table cannot be seen because of vertical overflow !!!"
I disagree. If the table does not appear in the text frame, then it shouldn't be in the text frame object. If the table appeared as a child of the text frame when it does nto appear in the frame (when it might have moved to another text frame in the story), it would be even more confusing.
This points out the danger of relying on the text frame as the container--instead, use the parent story of the text frame, which will contain all of the text in the story, regardless of whether it's visible or not.
Thanks,
Ole

Insert shape over image in table cell

Want to use circles, ovals, lines with arrows to point to some part (text or image) of a cell in a table.
Need to emphasize certain areas of graphics in a document used as a step by step type document.
If I add the shape outside the table and then try to drag/drop on to the image in the cell, the entire cell jumps to a new empty cell.
Can nod get image to appear over the image in the table cell.

Hello,
do you think about this, please have a look here: http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7b86a .html.
Another way, to add text over an image uses Nancy O.'s Demo here (I would prefer by using PS or similar):
http://alt-web.com/DEMOS/CSS-Sold-Out-Text-over-image.shtml
Hans-Günter

Cannot rotate text in table cell

I am using LiveCycle Designer 8. I want to rotate the text in the top row of a table so that the text is displayed vertically. I have created a simple 3 column, 2 row table. I select one of the cells in the top row (I click in the cell and the cell borders are highlighted). When I go to the "Layout" tab the "Rotate to 90", "Rotate to 180" and "Rotate to 270" buttons are "active" (meaning they are not greyed out and when I click on them, they move just as you would expect a button to move). The problem is that the cell does not rotate when I click on any of those three buttons. It's as if Designer simply ignores my click.
Since I am relatively new to Designer, my first question is: am I going about this correctly? If not, how do I rotate text vertically in a table? If I am doing it correctly, what can I do to fix this problem?
Thanks.

Tim, you're not doing anything wrong. That was a bug in Designer 8 that has since been fixed. To get around your problem, try manually adding rotate="90" to that particular cell in the XMLSource. So you would have something like: <draw w="30mm" h="22.2238mm" name="Cell1" rotate="90"> Steve Adobe Systems

Multiline text in table cell

Hi all,
I have used the oracle as the database.
My tabel consists of some columns.
Eg: 3 cols are there for name and father name
Iam displaying the data using the Table Model.
But I want to have the name and father name in a single cell
like:
name
father name
micheal
Mr. Johnson
name and father name is the heading which should be in a single cell
michael and Mr. Johnson are the values which should be in a single cell
How can I do this?

Since you can't use the formatted UI elements, you will need to remove the XHTML formatting. I would suggest perform text replacement and removing the

completely and replacing the

with cl_abap_char_utilities=>cr_lf.
Try that with the textView. If the carriage return isn't used in the text view, you might swap the UI element to a disabled textEdit UI element instead.

How to vertically center text in table cell?

How do I get text to center vertically in a cell?

It centres all the text, no matter how many lines. I test the solution.
What have you done? Explain what you are getting and exactly what it is you have done and the result you wanted. We can't see your screen.
Peter

Text in table cells as links to open a new document

I am using cs 5.5 on a mac.
I have a table in an introduction chapter that is an 8 by 8 table. Each of the 64 cells of the table contain a number. That number is the appropriate chapter for them to read and each chapter is a separate document in a book.
I would like to find a way that if a person clicked on that number (in the pdf exported document) that the reader would be directed to that appropriate chapter.
I hope this is easier than it sounds.

designnewbie wrote:
I am using cs 5.5 on a mac.
I have a table in an introduction chapter that is an 8 by 8 table. Each of the 64 cells of the table contain a number. That number is the appropriate chapter for them to read and each chapter is a separate document in a book.
I would like to find a way that if a person clicked on that number (in the pdf exported document) that the reader would be directed to that appropriate chapter.
I hope this is easier than it sounds.
Cross-references or hyperlinks can do this, though you'd have to create the 64 links manually.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Coloring text in table cells depending on what text appears

I have a table where some entries say 'success' and others say 'failure.' I want the 'success' to appear in green and the 'failure' to appear in red.
This code doesn't work:
        model = new JTTableModel();
        JTable resultsTable = new JTable(model);
        resultsTable.setDefaultRenderer(Object.class,
                new ColorRenderer());
    public class ColorRenderer extends JLabel implements TableCellRenderer {
        public java.awt.Component getTableCellRendererComponent(JTable table, Object value,
                boolean isSelected, boolean hasFocus,
                int row, int column) {
            System.out.println("value " +value+ " class of value "+value.getClass().getName());
            if (value.equals("success")){
                setForeground(new Color(0,255,0));
            }else if (value.equals("failed")){
                setForeground(new Color(255,0,0));
            return this;
    }What am I doing wrong?

But lmgtfy is rude, No it isn't. Most posters are too lazy to search for themselves. There are hundreds of examples of renderers to be found in the forums here. Many times is it faster for us to point to links that have the answser rather then spend time explaining everything you have done wrong. You are not the only person we help.Then why not post the link to the Google search directly? No, lmgtfy is not about simply posting a link, it's about posting a link in a way that says, 'You're too stupid to use Google, so I'll do it for you.' Which is rude. No Duke points, sorry.
As for searching this forum, the quality of search results here is definitely poor. How many screens of results should I search to find an example of what I need? Maybe I'm spoiled by Google, or maybe they should open this forum to Google search, and make the wisdom here accumulated more available.
but if you note the time this was posted,We have no idea where you live or what time of day it is for you.Yes you do, if I set the time zone on my profile.
This is my last post on this thread. I'm not going to bicker with you.

Text Field over Text in Table Cell

Similar Messages

Maybe you are looking for