Text frame rollover states in lightbox display comp widget trigger area no longer working in V 3.0

Hi
I had text frames with rollover states placed into the trigger area of lightbox display composition widgets
The rollover on the text worked fine, and then when clicked the lightbox composition widget opened
However this morning I updated Muse to the latest version 3.0 (which I was prompted to do) But now all these text frame rollover states no placed into the trigger areas of my lightbox dispslay composition widgets no longer work throughout my entire document
The lightbox will open when I click the text, but the rollover effect will no longer work
Is anyone having the same problem? Is there a way I can fix this? I was supposed to send the site to a client this morning :\
Thanks

Yes. I'm having the same type of trouble with a site I'm updating for a client. I haven't updated the site since before version 2.0.
But now that I've upgraded to version 3.0 my rollovers and linking for the rollovers don't work. Very strange. I too need to get
the site posted ASAP.  Please someone help us on this subject.
thanks

Similar Messages

  • Why can't I reduce the height of my container box in the Lightbox Display composition widget?

    I'm using the Lightbox Display composition widget, I would like to place my trigger at the bottom of my lightbox, I've reduced the height of my image frame but the container box cannot be reduced accordingly. I need to reduce the height of the container box or my triggers will be hidden behind the box. Please advice, thank you.

    Hi,
    When you insert the light box display, by default it has 3 slides with different components like trigger, container, target, image frame, text box, next button, preview button. You have to change the dimensions for all components for these default 3 images one by one.
    Or you can delete 2 of the triggers (that will resul in deleting all of their components from the widget), then you are left with only one image and its components. Later, you can add more images to lightbox display.
    Resize the components as per following video:
    http://gauravr183.businesscatalyst.com/images/2013-09-26_1440.swf
    The steps are, after you have added the widget on the page:
    Delete the triggers.
    Then select Image frame, resize it. Move close button near it (the 'X' button), resize the text box,resize next and previous buttons and move all of these near the image frame.
    Then click on the image frame, till you get "Target" area selected, resize target area and container will be resized automatically.
    Regards,
    Gaurav Aggarwal

  • My iphone 4's text, keypad and alert tones are no longer working, also Ipod no longer plays without headphones plugged in. Please help!!

    Since about a month now my iphone 4 text/alert tones, Keypad and lock tones and also the music are no longer working. It is not onTone 'None'. When someone calls me it rings no problem but no other sunds seem to work. It only vibrates.
    If I go onto itunes from my phone it also doesnt play the clips of music. Has anyone else had this? I have reset, restored, updated and nothing has worked or helped.

    No the mute button isnt on as it still rings for calls.
    Mine is since that update aswell, I have been blaming that but just wasnt 100% sure. There was an update this week but hasnt sorted it. Im a 4hr drive from nearest apple store so really trying to avoid having to send it away/go to a store with it.

  • My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    Basic Troubleshooting Steps when all else fails
    Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
    Relaunch the App and try again.
    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Ever since updating my iphone to IOS6, my imessages are no longer working, its all regular text messages.  is this something that has changed with the new update?

    I can't figure out why my iMessages have stopped working since I updated my OS.  Is this an effect of the new update? Thanks for any insight!

    What 4.0.1 changes is the display of signal strength, which was much too optimistic in earlier versions of iOS. The actual signal strength has not changed, nor will it ever by a software update.
    You cannot compare signal strength by how many bars are drawn. This is an interpretation of actual signal strength (which is expressed in deciBells) by the software. This software can change between revisions of software on the same device and most definitely is different between devices of different manufacturers.
    Here is a nice graphic rendering of what's happening: http://images.anandtech.com/reviews/gadgets/apple/iPhone4/part2/iPhoneSignal_bot h.jpg

  • When hovering over button text it does not show button rollover state

    Hi
    I'm new to captivate and I'm looking for some help please.  I have created buttons with Adobe Flash and saved them in PNG format,  I have created an upState, overState and downState.  These are working really well when I use them in Captivate.  However when I add text to my buttons and rollover the text the buttons don't change state.  They only change state when I hover over the button itself (a bit without the text).
    Any help you can give me would be greatly appreciated.
    thanks

    No, if you cover up with text, and user clicks on text, the rollover state will not function.
    I have another work flow for translation (have tutorials in several languages as well). In previous versions I used Photoshop to create buttons, using layers and having the Text layer separately, so that to translate I only needed to change that layer. But I created the regular Captivate buttons (needing three PNG's for 3 states).
    In Captivate 6 I have almost replaced all butons by Smart Shapes used as button. Since the double as text containers, translating is now done in Captivate itself. But those shape buttons do not have a rollover functionality, can cope with that, I opt to show the hand cursor.
    Really, cannot help you if you want to stick with Flash buttons that have to be layered under a text caption, unless you make the flash button transparent where the Text has to go, so that you can put the text under the Flash button.
    Lilybiri

  • Why States don't work on Tablet view for text frames over background image?

    I have Macbook Pro with Top config on top S/W everything updated.
    Using Muse.
    Tablet view site.
    Simple text frames buttons with states over a full width background image - DON'T WORK!
    The text frame buttons are in TOP layer.
    Visible but do not respond to to any touch. UNLESS I delete the background image.
    Can't figure it out for days.
    Please help.
    Thanks
    Eli @

    TO MUSE STAFF!!!!
    I Found a major bug that needs to be fixed:
    In Tablet view:
    A linked text frame or state button has to be in the top layer to respond to states.
    If a composition menu is opening up and covering the button when triggered - THE BUTTON WILL NOT RESPOND EVEN IF THE COMPOSITION IS CLOSED!!!
    Only if the button is ARRANGED ABOVE the composition in the layer and becomes the absolute TOP OBJECT in the layer - ONLY THEN it will respond.
    PLEASE LET ME KNOW IF YOU GOT IT.
    I have tested it on a few projects and the bug is consistent.
    [email protected]
    Thanks for fixing it in the near future
    Eli

  • Update - Lightbox Display Centering Issue

    Upon updating my Adobe Muse software, it appears its created an issue that effects my lightbox display composition widgets. They don't seems to be centered in the webpage anylonger? Help?

    Hi Mark,
    Unfortunately you hit a bug that causes the lightbox to be off center. This happens if the Target inside the Container for each Composition widget has different strokes for different states.
    Until we release a fix for the bug, please make sure you use the same stroke for all the states of a Target, or do not use a stroke at all for that Target. In your case, the Normal/Rollover/Mouse Down states all have a red stroke, while the Active state has no stroke. You can easily select each Target using Layers panel, and then from the states panel select the Active state and use the delete button from the lower-right corner to clear that state's customizations, including stroke.
    Sorry about the inconvenience. Let us know if workaround fixes the issue for you.

  • Is it possible to select an anchored object in a text frame in InDesign in a script?

    I would like to know if it is possible to write a script to select an anchored object in a text frame. All the scripts I have found so far do not work on anchored object.

    Check out this thread.

  • Removing text frames from rdf export format

    After a report has been exported in rdf format, can anyone tell me if there is a way to remove the text frames from the document, so that the formating is retained but by using word's tabs etc.
    Our client needs to manually add sections to the document after the report has been generated and we find that because of the text frames the document formatting gets ruined when new sections are added to the file.

    I don't know whether any of this will help?
    According to the manual there are only a very limited range of adjustments you can make to iMovie projects.
    Turn iMovie adjustments on or off
    When editing a project in iMovie, you can adjust several video attributes, such as exposure, brightness, and saturation, in the Project Browser. If you import an iMovie project that has these adjustments into Final Cut Pro, the adjustments are retained and appear in the Color area of the Video inspector as an iMovie item.
    Although you cannot modify the adjustments added in iMovie, you can choose whether they are applied to the clip or not.
    Note: Video adjustments you make to clips in the iMovie Event Browser are not retained and do not appear in Final Cut Pro.
    Turn a clipʼs iMovie adjustments on or off
    In the Timeline, select a clip with iMovie adjustments applied, and select or deselect the iMovie checkbox in the Color area of the Video inspector.
    Note: The iMovie adjustments appear only in the Timeline, not in the Event Browser.

  • HP ENVY 100a LCD Display no longer working.

    The display and diplay lights are no longer displayed on this al-in-one printer connected wirelessly to my DELL desktop running windows 7, 64 bit system since the last microsoft/HP update for windows 8.

    See my response in your other thread, found here.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Multi-state scrollable text frames

    I've created a multi-state object with 5 different articles the problem I seem to be having is after scrolling half way down on one and switching to another it remains half way down the scrollable frame. Is there a way to have it return to the top of each state when switching between the states ?

    Sorry for the misplacement,
    I'm making a portfolio and have 5 separate projects to display, I was hoping to display them on one page with 5 separate buttons allowing the viewer to switch between them seamlessly than to have them on 5 separate pages.
    I've got the desired effect thus far using 5 scrollable text frames combined into one multi-state object but switching between states keeps it relative to where the person was in the last state. Due to some articles being smaller vertically than others this can be a problem as it shows up blank which will probably create an impression of the information being non existent or the program not working.
    I would appreciate any help on resetting the state to the upper left between changes and not just on the initial opening, or any alternative methods that would create the desired effect.

  • Link to frame in button rollover state not working..

    Hi guys,
    What I use: Flash CS5 & Actionscript 3
    So I had my buttons working just fine and linking to a frame. But after adding a rollover state in which my button has grown in size it no longer links.
    Does anyone know how to get my buttons linking in their rollover state?

    var someObject:MovieClip;  // this is declared - only
    var someObjectMovieClip = new MovieClip(); // this is declared and instantiated
    Make sure your code uses aghains and not instancename like your code shows. 
    I don't think you understand the third and fifth items I listed either.  The third is saying that the code is not in the same frame as the item it is trying to target.  The fifth has to do with objects in consecutive frames, not linking.
    If you followed what I mentioned in the last sentence you should have a line number indicated in the error message that will tell you which line is causing the problem.  Whatever line that is, the object doesn't exist as far as the code sees it.  So if it was the line...
        instancename.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_28);
    I can guarantee you that there is no object named instancename in the frame where you have that code since it is the only object targeted in that line of code.

  • Scaling a button with rollover state (IDCS3)

    If you have a button with a rollover state and then scale it, only the currently visible state is scaled.
    Would you guys consider this a bug or intentional?
    Any hints on how I can scale all states without laboriously editing the content of every button state?
    Cheers, Graham.

    Graham,
    Nice follow up on this, but watch out!
    When you change that preference to "Adjust Scaling Percentage" anytime you scale text frames, you will create a situation where the point size changes but is displayed with the parenthetical amount.
    For instance, if you scale 12 point text down 50%, the point size for text will be displayed as 12(6)pt.
    Then if you want to change the text to 8 point, you would have to type in 16 points.
    Obviously with this simple example the numbers are easy to figure out, but with other amounts it can get very complicated.

  • Tooltip Trigger for Lightbox Display

    Is it possible to have a tooltip as a lightbox trigger?
    In other words, you hover over the trigger and a tooltip pops up, click the trigger and a lightbox display appears.
    My goal is to have an image of a hand pointing at the trigger when you roll over it, and disappear when you move your mouse off. Click the trigger and a lightbox display appears with more information.

    how do i change it so that when the page loads that text frame loads normal state? i can't seem to get this particular txt frame to do that. all the others do it. i've deleted it, copied another, made it from scratch- this last one always seems to load in active state
    also, after coming out of the lightbox- is it possible to make the txt frame return to normal state?

Maybe you are looking for

  • FileExists not working correctly.

    Why will this redirect work perfectly :- Response.Redirect("http://webservername/SafetyRecordsOffice/AsbestosPhotos/" & cStr(Request.Form("photo_ref")) &".jpg") and this won't :- Set photoExists = CreateObject("Scripting.FileSystemObject")    If phot

  • Synchronize TOC greyed out?

    I have a RobohelpHTML project, everything is great except when you click on pages in the TOC the TOC does not stay highlighted or automatically expand a book to give the user context as to where they are. As far as I can tell from reading around, I n

  • Mainframe Integration using File Adapter (FTP Mode):: ftp commands

    Hi, We are trying to integrate with Mainframe system using File Adapter. (FTP mode). We are able to write the file to Mainframe system but not able to format it properly. We had to provide FTP parameter,  <b>ftp.quote site recfm=fb lrecl=150</b> As p

  • Spring MVC Portlet in Weblogic Portal

    Is there any sample application for Spring MVC Portlet(JSR 168) in Weblogic Portal ? If so, where can I download it from ?

  • Removing old photos from iPhoto to external HD but not the library

    Hi I have just purchased a new external HD.  I already have one which is used with Time Machine for backing up my mac.  My problem is the mac HD is not that big and my extrenal with time machine is also getting full and after reading around I discove