Text run onto next page

Hello,
I'm creating a form in Adobe XI. I have one question where I want the person's response to be a maximum of two pages long. How do I have it so that their response will run onto the next page? I've been trying for ages and can't seem to figure it out. I need to publish this form by the end of the week. Any thoughts would be very much appreciated!!!
Thanks,
Lindsay

"... a simple and common issue."
Yes - that's why Adobe markets the LiveCycle Designer application  for building dynamic forms (XFA).
Be well....

Similar Messages

  • Pages 5 Document Endnotes doesn't allow text continuation onto next page?

    For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
    Example:
    Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

    I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
    In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
    On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
    In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

  • SAPscript MAIN Window ITEM TEXT Printing in NEXT PAGE

    Hi,
    I need to print the Item Text (Item Description or Column Description) if the Item Values (Lines) goes to the NEXT page in the Form. I have TEXT ELEMENTS defined for ITEM TEXT and ITEM VALUES in the MAIN Window. There is no issue with Printing the Item Text and Item Values in the FIRST Page. But in the NEXT page only when the Item values are printed (Item lines in excess of FIRST page), ITEM TEXT needs to be printed before printing the ITEM VALUES. If the FROM goes to NEXT page but not the Item values, then ITEM TEXT need not be printed in the NEXT page. The number of lines in the MAIN Window is different for both pages (FIRST & NEXT). I am not sure how to get this done. So, please provide me with a suitable solution to get this done. Appreciate your help in advance.
    Thanks,
    Kannan

    Hi Kartik Tarla,
    Thanks for your reply. Printing item lines between PROTECT / ENDPROTECT, will lead to Print all the line item together in one page. That is not I wanted. It the line items flows to NEXT page, I need to print the Item Header/Item Text. Otherwise, NEXT page should not have the Item Header.
    Thanks.
    Kannan

  • Text field in table not overflowing onto next page!

    Hi,
    I have set up a table with a text field in the first row, added buttons to add and delete rows, set to allow page breaks and made the text field to expand to fit and allow multiple lines. The problem I am having is that if I put a lot of text into the text field it will not expand on to the next page so not all of the text is visible. If I just set up a 1 row table the expansion works as I would expect and takes up as many pages as needed. Somewhere along the line the add, remove buttons or their associated javascript or the Repeat Row option seems to be having an effect.
    Any ideas?
    Thanks,
    Greig

    Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
    On the bodypage properties that's done within the pagination tab.
    Make sure that you enable the "Allow page breaks in contents" tickbox.
    By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
    If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

  • Cannot Print the continued text on to next page

    Hi Experts,
    I am facing a problem with the text not printing on the next page. The scenario is like this:
    I have created a template and i am calling a text which actually exceeds the template size, the remaining text should follow onto the next page. But the text that should move to a new page is not being displayed.

    Hi,
    What zamir told, Aboslutely correct.
    Here i am giving more info for Your better understanding between template and table use in smartforms.
    Might be useful.
    http://www.sapwings.com/guides-a-tutorials/doc_view/626-sap-smart-forms-overview.html
    difference between template and table in smartforms
    http://www.saptraininghub.com/smart-forms/

  • Text runs of the page / doesn't resize with window

    Hi,
    I have seen this before but cant figure out how to fix this:
    In Mail and other applicaitons that involve typing text the sentenses run off the "page".
    When I resize the window the lines dont' adapt to the window.
    I am stumped, please help :-)
    Rogier

    Howdy. See if this helps:
    https://discussions.apple.com/thread/5298047?tstart=150

  • Smartforms text doesnt appear next page

    hi all,
    I have an text which flows from the main window to subsequent pages. but while i execute on the print preview it shows 5 pages. but i am unable to scroll nor look for the next pages on the print preview.
    I have even used shift + f11 to go to the next page. but the contents are not displayed. How to look for the contents in the next page in the print preview?

    Hi,
    in print preview you just have to use the "Page Next" button.
    Fred

  • How do I keep stroke from spilling onto next page?

    My InDesign document has a few strokes that are on 45 degree angles and I'm trying to keep them from spilling onto the next page. I can't send them to the back because that won't work in this instance. Is there a way to keep them from showing on surrounding pages? Thanks!

    A screen capture would help explain the problem. Are you saying you have stroked frames, rather than just open paths, that are rotated and cross the page boundary?

  • Help Req'd! - Table will not flow onto next page!

    Hello!
    I am currently doing some form design for a large SAP project in the UK and am having problems with getting a table on a remiitance advice form ive created to flow onto a new page.
    currently my form is configured as follows:
    - saved as a dynamic pdf.
    - 2 master pages: the first containing text fields for form title, company logo, addresses, and a disclaimer at the bottom, page numbering, as well as a border created with rectangles. The second contains all of the above except the addresses.
    - 1 body page: contains a subform set to flowed (top to bottom) which contains a table with header/data/footer rows. The data row is set to repeat data so as to expand when there is more than 1 dataset.
    i have tried playing with content areas but they will not stay at the size to which i draw them and then cannot be manipulated afterwards, also i only have pagination settings available to me on the body page itself in the hierachy. the subform inside it, and the table inside that, have greyed out pagination settings.
    finally the body page is set to positioned at present as setting it to flowed causes the subform containing the table to shoot to the top of the page!
    The problem I am getting is that the table when containing lots of data just runs off the end of the page!!
    Any ideas much appreciated!
    Thanks!!
    Edited by: Ryan Harris on Jul 3, 2008 1:05 PM

    Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
    On the bodypage properties that's done within the pagination tab.
    Make sure that you enable the "Allow page breaks in contents" tickbox.
    By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
    If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

  • Flowable Form does not flow onto next page

    I have created a form with a table wrapped in a subform and made it flowable and each field expandable. That part works great. However, I cannot get the content to flow to a subsequent page. When the content is too large for the page, it just keeps pushing down beyond the bottom of the form where I cannot even access it.
    The form contains a table of three rows and within each of those rows, all but one column contain a table of three rows. The highest level table is wrapped in a subform and it is marked as flowed with each text field set to expand to fit. I've selected every row and subform I can and checked the box "Allow page breaks within content". The forms still does not break at the end of the page but just keeps pushing the data down off the page.
    Any help you could give me would be greatly appreciated. Thanks.

    Thank you for your assistance. However, that subform is flowed and Allow page breaks within content is checked.
    Is there something under pagination for that subform that I might need to do. I tried creating a page 2 and intended to set the Overflow on the pagination tab to page 2 but that is not an option. I can only set this to PageArea1 or ContentArea1 which I see are objects in the master pages and I do not have a page 2 in master pages. Is that the key?

  • Header Repeats when table runs onto 2nd page

    I have a form with a dynamic table in which the user is allowed to add and remove rows to it as needed.  The table also has a column on the end of it that will become visible/hidden on the click of a button.  It also performs basic arithmatic (addition & multiplication) needed to calculate prices for orders.  The problem occurs when the table becomes too large to fit on one page; it flows onto a second page.  When the file is saved, closed, then re-opened the table will appear with two repeated headers and two repeated footers.  Any idea of what is causing this to occur?
    Above is a sample of the table before the problem occurs.
    Above is the double footer that appears when the file flows onto a second page, is saved, closed then re-opened.
    Any assistance is appreciated.
    Thanks.

    You can check the checkboxes in the attached image on how you want the header and footer to repeat in the pagination..
    If you want the Header to appear only on the first page, then check the first checkbox below.
    If you want it to repeat in all the subsequent pages check the second one..
    Similarly, if you want the Footer to display only at the end check the last check box..
    To set these properties, select the Header Row/ Footer Row in your Heirarchy palette and goto Pagination tab in the Object Properties..
    Thanks
    Srini

  • Ext page arrow[s] missing from base on column...why! hwlp pleaseant click onto next page

    have used'''''' '''''''''''''''''''''''firefox''''''''''''''''''''''''''l''' with ''' ''''''''''''''hotmail.com'''''''''''''''''for long time.. but currently
    n ext page arrows at base of hotmail column have gone missing..
    .i e not visible.... why.... please help....i need access to all my past hotmail messages
    thank you [email protected]

    See
    firefox has started running off the screen. ...
    *https://support.mozilla.com/en-US/questions/873327
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Wrapped column "bleeds" onto next page of report

    Does anyone know how to stop a wrapped column from printing on two different pages in sqlplus? I have this sqlplus report that has a certain page size. Whenever it hits the end of a page it doesn't care if it splits a wrapped column in half. See below in the example, where it splits the last name "jones-macdonald" across two pages.
    LAST NAME FIRST NAME ADDRESS page 1
    smith john some address
    smith james some address
    jones-macdo loretta some address
    LAST NAME FIRST NAME ADDRESS page 2
    nald
    johnson lucy some address
    Thanks to anyone who can assist.
    --Susan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Yes, I did set a format and told it to WRAP. Unfortunately, my report contains a number of columns that must wrap or the line is too long. However, some people complain about the way it splits the data across two pages.
    I can't find anything in the sqlplus documentation on how to fix this. Maybe there is a trick someone knows.
    --Susan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Print line items on next page if does not fir onto current page

    Hello Experts,
    I have a query related with Smartform.
    For every Line item, I have 4 lines. Means, if there are 4 line itmes in Internal table then it means, on form 16 lines should be printed.
    My Requirement - If any of the Line item does not fin onto a single page then shift the whole line item onto next page. Means, If Line item 1 and 2 are printing on 1st page completely, but line item 3 is not able to print completely on 1st page then shift all the 4 lines of line item 3 onto next page.
    I tried - Put the main table of main area in a Folder and checked the PAGE PROTECTION of that folder. And in the Foder itself, use a command with checked GO TO NEW PAGE. But it is not printing. Form goes into shortdump.
    Please help me to resolve this issue.
    Regards
    Kuldeep M.

    Hi,
    U try to fix the no of lines per page. If the no of lines in ur table are more than the lines per page then u call the COMMAND 'Go to New Page' and give the Page name.
    Eg:
    data : lv_lines TYPE i,
              lv_lines_per_page TYPE i value 12.    (Try to design the Window height to fit 12 lines or ur wish)
              lv_count TYPE i.
    describe table itab lines lv_lines.
    Now, u loop the itab table and put a condition in the LOOP:
    LOOP AT itab.
      lv_count = lv_count + 1.
    IF lv_count GT lv_lines_per_page.
       clear lv_count.
       create command 'Go to New Page'.             --->In COMMAND put condition lv_count GT 12
    endif.
    ENDLOOP.
    Hope it helps!!
    Rgds,
    Pavan

  • Allowing users to enter text into a web page

    Hi there,
    I'm not at all versed in Java, so I would like some advice on how to do the following in a web page.
    Imagine you have a group of four users and they have to be able to give you a response to a question and be able to see what the others have responded.
    Basically I want the users to be able to to enter text into the webpage, so that the question can be changed and also so that each person can change their reply (in a space under their name.)
    It would also be acceptable if the text was from a predetermined list, ie a drop down list which has a "memory"
    Any ideas would be most welcome, thanks in advance!
    -Ekipero-

    Hi again,
    I think I didn't explain myself clearly enough.
    Basically, all I need is a text box which can be edited by anyone who visits the webpage, and which once edited has a "memory" so the next person who visits the page can see what the person before wrote.
    I don't know any Java but I'm sure an applet to do this can't be too difficult right?
    Perhaps doing it through a text box and a Submit button which then pastes what has been written in the text box onto the page? Or perhaps the text can be chosen from a predetermined list?
    Thanks in advance to all ;-)
    -Ekipero-

Maybe you are looking for