Text Updation failure in Purchase order creation

Hi
We are trying to update the PO Item Text Object in PO User Exit include ZXM06U44.
In most cases, Text is updated into PO text correctly and sometimes, it doesnot. In particular if its PO's are created in batch mode.
Have any one of you faced this issue and how did u resolve it.
Any inputs or suggestion is highly appreciated.
Thanks
Joe G A

Hi Ravi / Lokesh,
My apologies for not sending the required additional information.
We are calling this SAVE_TEXT in custom function call in update task (in include ZXM06U44) with priority 'V1'(Update module set as 'Start Immediately'.
so when we call this save_text, PO should have been created and PO no is available. Do u agree on this ?
Infact I checked this part and we are getting the PO no always when it hits the SAVE_TEXT.
This problem occurs mostly when POs are created in batch mode.
Appreciate your reply.
Thanks
Joe G A

Similar Messages

Update flag in Purchase order creation/change

Hello,
Is there any way I can find out in ME21n if a PO is getting created or changed (something like UPDKZ in Sales order creation)? I basically want to execute some code only when PO creation.
Thanks
Ramesh

Hi Ramesh,
There are number of ways you can find if PO has been changed or not.
Method-1). You can check in ME22n. Once you create a PO using ME21N, go to ME22N to see the PO again
( ME22n doesn't always means that you are changing PO ).
In ME22n open PO
a. select menu option: Environment --> Header Changes to find header level change.
b. select menu option: Environment --> Item Changes to find iteam level change.
You have to select corresponding line and then select the given menu option for changes on that line.
Method-2). Check table entries CDHDR and CDPOS.
a. Go to Se11 --> Table name CDHDR
OBJECTCLAS = "EINKBELEG"
OBJECTID = "(PO Number)" and display records.
Neglect all records where CHANGE_IND field is 'I'. This is the record of when the PO is created. If there is any other
record when you neglect the one with 'I' indicator,then PO has been change.
For example, you have found two records.

OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE UTIME TCODE PLANCHNGNR ACT_CHNGNO WAS_PLANND CHANGE_IND 
"EINKBELEG 4500000752 2252739 XCLAREP 03/30/2006 14:25:11 ME21N I"
"EINKBELEG 4500000752 2252740 XMICHEAL 03/30/2006 14:25:17 ME22N U"
Here the first record is for PO creation (CHANGE_IND = 'I' ). if you neglect it, you still have one more record with
CHANGE_IND = 'U', which indicates PO change.
Take the change docuement number (CHANGENR) from second record. Go to table CDPOS and display
record for the change document number you got from CDHDR and see what are the changes made to PO.
Method-3). Use FM CHANGEDOCUMENT_READ_HEADERS and CHANGEDOCUMENT_READ_POSITIONS

Make short text field in Purchase order creation only display..

Sir,
Yeah my requirement is quite unusual, but such is the situation.
I want to make the short text field in purchase order creation "only disply". what is happening is that user while creating PO is able to change the text of material in short text column. I want to make it only for display.
Can it done on document type level, since for service type, and Text type of account assignment cat, only text field is filled up. so how to do it.
Please assist...
Rahul

Dear Rahul,
If you want to have the short text display only for standard item but not service item, you may check below customizing.
Transaction SPRO:
MM-PUR-PO
-> Define screen layout at document level
Field Selection group: Basic Data, Item
Field Selection Key: PT0F Standard item purchase order
Field: Short text -> set as display
Hope this help.
Ian Wong Loke Foong

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
* Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
* Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa.
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi
 poitemx = i_bpoix
 poschedule = i_bpos
 poschedulex = i_bposx.
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

Document is in transfer for purchase order.Creation not possible

Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.

Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ

Purchase Order Creation from ME5A Report

Hi experts,
My client wants Purchase Order Creation from ME5A Report.
He wants show Open Purchase Requisition through ME5A report then he will select Purchase Requisition Number or line item for po creation from there only.
Please advice how I can map this process in sap.
Thanks in advance,
Chandhu

Why don't you use ME57 to display open PRs and then assign sources and convert them to PO?
Or use ME57 to assign sources and ME59 to automatically convert them to PO.
You can create your very own format for report display using custom "Scope Of List" for ME57.
Look in SPRO under Purchasing>Reporting>Maintain Purchase requisition lists.

If we can increase the length of the Short Text field in a purchase order?

Hi Experts,
Please suggest if we can increase the length of the Short Text field in a purchase order?
If yes, How? and what will be the impact?
Thanks
Gavar

Dear Arpit,
You can use PO Text field for long description of the material.
Regards,
Manish Jain

Purchase order creation - Account assignment group C (Sales Order)

Hello Gurus
During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.

Hi,
Creation of Purchase Order with t.code: ME21N with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
Here you provide service to your customer and this service you procure from your vendor, you just play middle role for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
Example:
Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
Regards,
Biju K

Vendor block code for release order creation but no purchase order creation

The client has a vendor block code which when applied to a vendor through vendor block screen should allow release order creations against existing contracts and ARC but it should not allow purchase order creation. However, it is allowing purchase order creation also. Can anyone tell how to achieve this selective treatment that allows RO creation against existing contracts and ARCs' but no PO creation.
Are there any settings or configurations that have to be made in SPRO and other areas to achieve this.I would appreiate if anyone could give in a detailed and step wise solution.

Hi
Take out all the blocks on company code and purchasing organization in XK05.
Only put block function as 01 (purchase order). It will not allow you to create purchase order but you can create contracts and release orders against contracts.
Thanks
Edited by: Praveen Raghavendra on Jan 8, 2009 2:30 PM

BAPI for Purchase Order Creation

Hi All,
Purchase Order creation through BAPI, Auto Po creation. Please advise program.
The requirement is: when we delivery the goods from one plant to another plant,PO should create in second plant with goods what delivered from first plant.
Pranitha
Moderator message : Spec/requirements dumping is not allowed. Thread locked.
Edited by: Vinod Kumar on Sep 30, 2011 3:37 PM

Hi,
As per u r requirement
you can use : BAPI => BAPI_PO_CREATE with suitable Document Type ( Stock trasnfert : STO )
IF u want to auto po must be created after each delivry in this case you need to use BADI
'MB_MIGO_BADI; In This BAPI There is method : POST_DOCUMENT
In this method u can write code for Auto PO Creation by using BAPI .
Hope This will Resolve u r query.
Thanks and Regads
Santosh

Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]

We are trying to create Invoices using the SDK tool for a clients interface. Everything goes ok, except at the point where we add the document, we get the following message:
Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]
Any ideas? We have searched the SAP notes, but nothing is available. Are we missing anything?
We are running on Version 6.50.098
Thanks
Marios

Hello Marios,
This error occurs because the last line you are trying to add to the Marketing Document is an empty line. It is a new functionality in Version 6.5 that the document object automatically comes with one document line so if you are adding just one line you do not need to use oDocument.Lines.Add,
It is only for the second and subsequent lines of marketing documents that you require the method oDocument.Lines.Add. Note 722693 describes the issue.
Regards,
Lisa

SRM Fixed Text Mapped to ERP Purchase Order for Extended Classic

We are switching from Classic to Extended Classic.
We currently have "Contract Riders" which are fixed text that the users can select and the header level on the ERP purchase order.
We need to add this functionality to the SRM purchase order. Unfortunatly the fix text on the SRM purchase order is only 30 in length. Can we map the fixed text codes from the SRM purchase order to the ERP purchase order so that the full text on the ERP side is selected?
Or is there a way to allow more than 30 characters for the fixed text in the SRM purchase order?
Regards,
-Paul

Answered.

Keep Original Position Numbers in Purchase Order Creation

Hi community, i'm trying to solve the following problem in purchase order creation using BAPI_PO_CREATE1:
I'm loading a file with several order numbers and positions to be created in R/3. This file has a structure similar to:
OrderNumber;PositionNumber;Material;Quantity;Unit;.......
The purchase order is created successfully, but i need to keep original position numbers in the order. i.e:
Supposing this input file:
1900;08;993322;10.00;KG.....
1900;13;994455;12.00;KG.....
the positions in purchase order are created as
00010
00020
But i need positions to be created as:
00008
00013
Any ideas?????
Thanks you for your cooperation
Leonardo

Hi Leonardo,
I doubt if that is possible.
You can have the configuration set up to set the Item Number Interval to step size like 5,10,15 etc,
based on this value, your line item number will be
5,10,15,20...
10,20,30,40..
15,30,45,60
etc.
to set this value, you should go to SPRO.
Material Management->Purchase Order->Define Document Types
Regards,
Ravi Kanth Talagana

Reg: ME21 Purchase Order Creation BDC Codes

Hi All,
Ritenow Im working with ME21 purchase order creation,
i have to create a upload program for this past twodays im geting hectic with this prog, if i create a prog using me21n transaction it is not running, and in ME21 i cant record in SHDB( it throws error messg as fill mandatory flds, but i dont hav data for that flds).
Anyone plz let me know, how to record it and how to use step loop in item overview/details, i would like ot close it ASP.
Thanks in advance.

hi
Creating an ABAP program from a BDC recording
Step 1
Execute transaction recorder, transaction SHDB or recording button via transaction SM35.
Step 2
Enter name for recording (can be anything)
Step 3
Enter transaction to be executed
Step 4
The transaction will now be executed, simply perform the actions you want to record. enter some values for the mandatory fields.
Step 5
Once you have finished the recording and selected the save button or exited the transaction you
Will be presented with the following information. This details the screens and fields that have been
Processed during the recording and will be used as a basis to create BDC ABAP program.

Text Updation failure in Purchase order creation

Similar Messages

Maybe you are looking for