Text wrap in text box

In the book module. I select one of the cover options that has a text box. When I type and get to the end, the text does not wrap to fill the box. Instead it types over the same line. Is there a way to have the text continue to the next line? I am using LR4 on Windows 7.

Dear 10Degree!
May be this example will be useful. Look for comments on the block diagram.
Jack
Win XP
LabVIEW 6.1, 7.0, 7.1, LabWindows/ CVI 7.1
Let us speek Russian
Attachments:
scrolled textbox.vi ‏33 KB

Similar Messages

  • Text wrap effects text in different columns differently

    In InDesign CS4, if you have a 2-column text box and a graphic with a text wrap that spans from one column into another, the text wrap will offset the text in the two columns by different amounts if the graphic is aligned with the top of the text box. That shouldn't happen; the very same text wrap on the very same graphic should offset the text in the two columns by the same amount. But it doesn't. The baselines will not line up from column to column.
    Clearly you can get around this if you snap to a baseline grid. But what if you don't want to use baseline grid? Is there a way to get the text wrap to offset the text in both columns equally?
    I have attached a screen capture to demonstrate the problem. In this case, the baselines align, but the text wrap is clearly affecting the text in the left column and not affecting the text in the right column, even though they are aligned on the same baseline! Any suggestions?

    You're right, it shouldn't happen, but it's a long-standing bug (or feature).  One workaround is to use a baseline grid. Another is to adjust the wrap offset so that it matches the baseline in the opposite column. Another way is to not design so a wrapped object blocks the full width of one column but not it's neighbor. It doesn't matter where you have the wrapped object -- if it completely blockst the top of one column and leaves a any space at the top in an adjacent column where text will fit, you'll get the potential for unbalanced baselines.
    The reason it happens is that in a column where text can reach the top, the baseline for the first line is controlled byt he first baseline settings in the text frame options. If the text can't reach the top of the column the positioning is controlled by the depth of the object and any additional offset for the wrap.

  • No text wrapping in text indicator

    If a line is too long to be displayed in a text indicator it wraps to the next line...is there a way to prevent this and rather have a horisontal scrollbar?
    At first I though this would be pretty elementary, but it seems not... One alternative is to use a table instead, but is there a better alternative I have missed?
    MTO

    Currently, strings do not have horizontal scrollbars. You can use multicolumn listbox instead.
    Zvezdana S.

  • Text wrap in anchored objects

    In order to place text boxes relative to the spine, I have placed them as anchored objects.
    But now, these text frames do not respect text wrap setting from objects outside of the anchored object.
    I have made sure that ignore text wrap in text frame options is not checked.
    Is this a bug?
    And does anyone know a workaround?

    In order to make my design indifferent to later added pages, I have placed all text frames and graphic placeholders as anchored objects, positioning them relative to spine.
    When I now place an object on top of such an anchored text frame, text wrap is not working, even if i overide the master page item.
    The only work around I have found is to copy the respective text frame and make the original master page item unvisible.
    Is there not another way to to this?
    For me, the best would be another way of placing text and graphic frames relative to spine.
    Bus as soon as one overrides the master page item, the object is not placed anymore relative to spine if another page is inserted.

  • InDesign CS6 Text Wrap increments not accurate.

    My work jumped from CS4 to CS6 so I don't know if CS5 had the same issue. Anyway. Text wrap (around bounding box) seem to now be very limited. For example, If I have, say a .25 text wrap on the bottom of a object, but I need to change it slightly to .245 the text does not move. The box shows the change, but the text below just doesn't follow suit. CS4 I was able to make tiny incremental changes to the wrap, but it is not working for me now in CS6. Any ideas, answers?

    Suggest you post product specific questions in the relevant product forum.
    Try posting at http://forums.adobe.com/community/indesign/indesign_general

  • Text Wrapping in table cell

    Hi folks
    If the text in a table cell exceeds the width of cell then is it possible to make that cell scrollable.
    Or either can we scroll only text horizontally.
    I know PopIn is alternate for this problem but see if it is possible.
    Thanks is anticipation,
    Mandeep Virk

    Hi Guys thanks for quick response,
    I tried it using text wrapping but i did;nt see any difference. Can u please explain a bit it text wrapping is true then how a normal line will appear.
    Is using text wrap the text comes in two lines or have some what different feel.
    Mandeep virk

  • Text wrap dialogue box is blank in CS3

    I am not able to view the options in the text wrap dialogue box - why? I have restarted InDesign and my computer but there are no options showing in the dialogue box. I use text wrap all the time so this is a major problem for me. Thanks for your help!

    Try resetting preferences. http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
    Immediately after starting Indesign, hold down Ctrl-Alt-Shift (Shift-Opt-Cmd-Cntrl on Mac). If you don't get a message about deleting preferences, you weren't fast enough.
    Ken

  • Is there any way to keep a photo/text box  where you placed it after it is checked as inline, I have text wrapping around many photos-Pages seem to move the photos to the middle of the page and that will not do for my project.

    I have a book I want to sell as an EPUB when done...only one problem I got the message when doing so: " floating objects aren't supported in ePub format" So I found out by checking inline format that will work but it moves the text box and photo to where it want to go and not where I want it to be...this will not work so how do I make it stay where I place it and still save without the error of floating object issues.... In addition, when I let it go where it wants to go it lets me stay as an ePub and takes me to iTunes producer ( I have my books on iTunes made with iBooks Author) and is this right...I want to make it ready as an ePub not for Apple but for other eBook readers... Can anyoe help? Thanks

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • Wrapping and auto-shrinking text in a text box??

    Hi -I'm new to using Pages and have a question that I couldn't track down the answer to in the Pages manual. When I am using a text box, I want to automatically have the text wrap and shrink. I can't resize the text box larger because of the newsletter layout. I could do this easily in Word when I work with a text box but can't figure out to do it here. Any help would be great. Thanks!

    Welcome to Apple Discussions
    I can't picture what you're trying to do. I understand not resizing the text box, but what is it that you want to wrap & what to shrink?
    I think you might be asking how to make the text you've put in the text box to fit the space available. You can "play" with the various adjustments in the text inspector. I find adjusting the line spacing by 0.1 & the character spacing by 1-2% can really make a difference without affecting the readability. Also, you can turn hyphenation on & off in the document inspector. One more thing to try is a different font.
    Wrapping of text around the text box or any object is controlled in the wrap inspector. The object must be floating for text to wrap around it.

  • Text wrap options are greyed out

    Hi,
    I am trying to create a "drop cap" by selecting a text box and changing the wrap options in the inspector however, the "object placement" options to wrap the text are greyed out and I can not change them, except for the options below, such as "object causes to wrap" check box and the "text fit" boxes.
    Is this a glitch? I have restarted both my program and whole computer, as well as tried it in a new document, and it still is coming up greyed out.
    HELP, I have a project due and I need to be able to add in drop caps!
    Thanks

    Hi Architecture Guy
    Welcome to the forum.
    A better method for creating drop caps:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=85&mforum=iworktipsn trick
    Peter

  • Text wrap not working... What am I doing wrong?

    Hi... I guess I do not know how to set up the text wrap in reflow to follow the size of the container that it is in...
    I have created a text box with the text the size I want and the width and hight of the box is correct... While editing the text it wraps correctly... But the moment I un-select the the text it ignores its container and overflows... Basically goes from being vertical text back to horizontal... I tried the different overflow options in the layout tab but no luck...
    Here are some images for reference... This one is correct and following the wrap (but only happens when i am editing the text)
    But then when I deselect the text... The wrap goes away and this happens... Even though you can see the container is still the same width...
    My plan is to have it be vertical for desktop browser sizes and then be horizontal for mobile and tablet... I was really hoping it was as easy as setting the size of text box... But it is not seeming to work...
    Thank you for any help!!!

    Just tried adobe direct support via chat to get help on this.... OMG I wanted to blow my brains out... So very very unhelpful and a complete waste of time.... They had no idea and said moderators on the forums would be better support... I explained that I had asked this question on there several days ago.... Getting so over adobe... WOW!

  • Text wrap not working properly CS4

    Despite trying numerous times over last few days, reviewing multiple tutorials to make sure I know what I'm doing, I simply cannot get the text wrap options to work properly. In SOME instances (not all ... why?!?) I can select text wrap, but when I try to make further adjustments (wider margin or switch to object wrap, for instance), it simply does not allow selection. The choices once I'm in the text wrap box are grayed out (margins, contour box, etc) as not available. WHAT is going on?! Do I have defective software? Is it me? I've even reinstalled the whole CS4. <aarrggh> I am SO frustrated!

    Things like this are almost always attributable to user error.
    If you're new to InDesign I'd suggest investing in Sandee Cohen's Visual Quick Start Guide: http://amzn.to/ggnCUx
    More details, screenshots, etc would help us, though.
    Bob

  • Text Wrap not working in Muse (CC 2014)

    I'm attempting to wrap text around a slideshow.  I have already inserted the slideshow in the text box, used the wrapping options to justify to the left, with the text running to the right and beneath the slideshow.  In the design layout, it shows up perfectly.  However, in the preview tab as well as previewing on the web, the wrapping does not show.  The slideshow simply appears over the text, with the text running behind the slideshow.  Any ideas on how to fix this problem or is it simply a bug that Adobe needs to eventually correct?  Thanks for your help!
    All my best,
    Rob

    Hard to tell from the screenshots. A couple nuances of text wrap that may be unexpected:
    1) If you select an item with text wrap and move it up or down in Design view, that will move the item but will not change the area that is knocked out for text wrap purposes. Thus text can overlap on object that has text wrap applied if the item has been moved up or down while in the text flow.
    2) Where an object is inserted in a flow is important. Generally it will provide the most predictable behavior if the graphic is inserted at the very start of a paragraph. If a graphic is inserted in the middle of a paragraph and text wrap is applied, exactly where the graphic will appear will be dependent on how the browser line breaks the text of the paragraph before where the graphic was inserted. A change in line breaks can result in the graphic appearing a line higher or lower in one browser versus another, since every browser has it's own text layout engine.
    Assuming neither of the 2 points above fit what you're seeing, it's probably most expedient to send us the .muse file along with a link to this thread for context at [email protected] and a note to let us know where to find the problem situation within the file so we can see the exact situation and settings for what you're encountering. If the file is larger than 20Mb you'll want to send it using a service such as Adobe Send, WeTransfer, Dropbox, etc. Thanks.

  • Can the text wrap tool options be reinstated?

    I may have inadvertenly hit some keyboard code to remove the options, though I certainly don't remember doing so. There are no options displayed at all, only a box that can be checked or unchecked to use the text wrap on the master pages only. I have tried it both ways, and checked the master pages for possible boxes, but there is nothing. Has anyone else ever encountered this? I appreciate your help! Thanks so much -

    What version of ID are you using? What OS?
    Your description is a littel vague but it sounds like you've opened the Text Wrap panel flyout menu and all you see is the option to limit wrap on a master page object to other text on the master page. Is the panel itself blank?
    If that's the case, see Replace Your Preferences

  • Contour Options in Text Wrap?

    I am new to CS6 Indesign. However, I have gone through the Classroom in a Book by Adobe and I have searched the Lynda.com site. Please help me find the answer.
    I made an object box. I put a large letter G in the box. I inserted and anchored the box in a text box full of text. I selected the object box and turned on text wrap. I selected wrap around object shape. I want the letters in the text box to wrap around the edge of the letter G in the object box, but contour options is grayed out so I cannot use those options. Why would contour options be grayed out and unavailable, and how do I accomplish my task?
    Thank you,
    Newcreator

    Ask in the ID forum.
    Mylenium

Maybe you are looking for

  • Error while activating ODS Object

    Hi, I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below.. -Value '20060 ' of characteristic 0CALQUARTER is     not  plausible -Error when assigning SID (details in long text) -Ac

  • HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

    Hello, I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list

  • ITunes Error 8268

    I'm getting this error message every single time I start iTunes. It's annoying now. I've tried a few things to try and fix it but no luck. Anyone know how to fix this? Thank you! "There were problems downloading some purchased items. For more informa

  • Tomcat error on start up

    Hi, I setup Tomcat for local development on my pc, and I get this "Syntax error" on startup: Syntax error Using CATALINA_BASE: C:\jakarta-tomcat-5.5.9 Using CATALINA_HOME: C:\jakarta-tomcat-5.5.9 Using CATALINA_TMPDIR: C:\jakarta-tomcat-5.5.9\temp Us

  • Need to add Header condition

    HI All, Good Morning!! I have one requirement ,wherein  my client is asking to  put $50 at header level inspite of how many items are there in order. This Fine should not be distributed among items of the order. For ex:- Item 1- 100 Item 2- 200 Total