Textnode: does not show special charaters correctly

To use special characters in Shake 4.1 u have to use hex-codes. This works with the font Utopia.
If I need a "ä" (auml) I need type in the following: \xE4 which gives me the correct sign - in Utopia! If I change the font to Verdana, 0/00 (permille ?).
I could not find a working hex-code table. Any idea?
Volkmar
MBP 17/2.13/2GB Mac OS X (10.4.8)

Hi,
can you please provide information which SW version you are using, and also the product code of the phones you are using (product code can be found from phones type label sticker under that battery, it's "Code: xxxxxxx"). With these information R&D is able to test the problem efficiently.
I'm working at Nokia, but all my posts represent my own views and these should not be mixed up with Official NOKIA statements.

Similar Messages

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

PDF created in MS Word does not print special characters correctly

I am having a problem with converting an MS Word document to a PDF. This document contains the Ohm symbol and the greater than or equal to symbol. I am using Word 2007 and Acrobat X Pro.
I am simply using the insert symbol feature in Word to insert the symbols. They appear fine in Word. When I print to PDF the Ohm symbol turns into an '&' and the greater than or equal to symbol turns into an 'e'.
A fellow I work with who has the exact same computer and program setup as me does not have this issue.
What can I do to correct this?
Thanks!
Chris

I tried all of the print/press options and they all do the same thing.
I have always used the pdf maker button from the MS Word ribbon.
I just tried using the print dialog and selected Adobe PDF with the 'high quality print' option that I need to use and this time it worked! But it is not really fixed as I make a lot of PDFs every day and need the one-click functionality.
In the PDFs that work and PDFs where the character fails I tried editing the text and it says that the font is substituted. In MS Word i am using Arial, Acrobat is using some "ArialMT" font that I never heard of.
The embeded fonts are also listed as ArialMT.

XML report does not show grouping fields correctly??

i have an rdf report with 2 queries linked to each other and 3 groups of fields extracted from them.
i generated an XML file from this report and used it to build an RTF template file.
in my RTF template i use two groups nested. i preview it and see that the outout is correct.
then i run the report from Oracle Applications and view the output. And see that the output is wrong. All lines are repeated in every header group instead of being group.
Can ony one help me about this?
Anyone encountered this problem?

Is it absolutely the same RDF file that you run on APPS and on the desktop to try the RTF template? If so, get the XML output on APPS (by de-associating the template from the data source), save the XML output file, and then try to run the template in the template builder using the saved XML.

DrawString method does not understand special characters

Hi!
I would like to send a String to a printer. I have tried the drawString method but my problem is, that it does not understand special charaters. The newline character is not a problem as I can just use the split method and then print the resulting array of strings.
The big problem is the tab character (\t). Is there any way to make drawString understand this character? Or is there a more simple way to print the text?
Kind Regards,
Mikkel

Thanks for your replies. I have to admit that the problem was a completely different one, a really stupid one!
The output from the print method looked horrible to say the least (it is basically an array of numbers separated by equals amounts of space). The problem was that the font was not set to be monospaced (!) so you can imagine how the output looked ;)...
Anyway, thanks for your fast replies. I will look into that class you told about.

Change Password does not show Correct Error Message

Hi,
I am using a password policy which says that Characters not allowed are @&()|\";'<>+=/?. :}{][
When the user try tochange the password and try to put any of the above character,
then OIM Web console shows an Password Policy error, which is correct.
The Problem comes in when the Webconsole does not show the full range of the unsupported characters,it only shows the below error
Password Policy Error
The following password policy rules are not met:
Invalid Chars=/?. :}{][
Ideally it should have shown the full set of unsupported characters, which led the user to do the mistake again by selecting same old special charcter.
Although,the logs at the back end, shows full set of characters.
My Question ,is how could this be fixed,what customization has to be done if any ,for reflecting this change on WebConsole page.
Cheers
Ak

Hi,
I resolved the issue by changing the Characters not allowed to =@&()|\";'+/?. :}{][
instead of @&()|\";'+=/?. :}{][
What i figured out is all the charcters after = are only getting printed at the Web Console, so i reshuffle the charcters and put = in the beginning.
And it is working fine.....
Strange huh.....:)
Cheers
Ak

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

Report S_ALR_87012000 Asset Register does not show correct values sums

Hi,
I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
1- the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990 - Asset history sheet
2- if I put an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
Could you explain me why? Is there some program bug?
Thanks in advance
Giovanna

Hi
If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
The execution for current year can have any date of the fiscal year for report execution
BR,Ajay M

ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery.

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?
paul.kelly

Hi Steve,
No expert, but since nobody else has piped in...
Did you setup the DNS Server IP?

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Safari does not show correct page

A friend of mine uses Safari, but it does not show the correct page. He tries to view http://www.ventanasalmar.biz. This is hosted as one of my 10 domains on my acount with a hosting company. He is for some reason redirected to my default account. When he uses Firefos from the same location, everything is OK. As I do not have the same program (Safari) myself, I cannot test. My friend is in the US, I am in Norway, so I cannot just pop over
Any suggestion about what could be wrong?
Windows XP

askim --
Welcome to Apple Discussions !
I tried on my Safari, and also on another browswer, Shiira.
Your site works great on both.
Your friend probably needs some housecleaning of his safari caches, etc.
Ask him to do these and try again:
1. Empty your cache & History settings via the Safari menu
2. Trash your Icons Folder:
HD>Users>Home>YourName>Library>Safari -->Icons
Restart Safari and a new folder will be automatically regenerated.
(This folder saves favicons of all the sites you visit. Needs cleaning periodically -- or you can change that file's preferences to "Read Only"
rather than "Read & Write." This will keep it from growing in size.)
3. Launch Font Book and check all fonts for duplicates. A duplicated font will have a bullet beside the font family and you can resolve duplicates by selecting the font and at the menu bar, go to Edit > Resolve Duplicates.
Do this for each font with a bullet next to it.
If he's still having problems:
4. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router first, let the lights set up right, and then restart your computer.
Hope this helps

Textnode: does not show special charaters correctly

Similar Messages

Maybe you are looking for