Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

Similar Messages

  • The templates are not showing up after I select them???

    the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour.  That leaves all the colours in the photo off.  Any help would be so very helpful.   

    CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
    I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed!

  • Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

  • Add-ons are not loading, JS popus are not showing up after click, firebug button not showing

    Hello,
    I was using Firefox 8, and then today i noticed that non of the JS scripts are working, the Add-on are not showing after a click, The Firebug button at the top right is missing,
    Thinking if I upgrade to 9 it will solve my problems, but it did not. How can I correct this? Am I missing something?

    Perform the suggestions mentioned in the following articles:
    * Update Firefox to latest version 10 -> [[Installing Firefox on Mac]]
    * [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Update Add-ons]]
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
    ** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
    Check and tell if its working.

  • Third party filters such as Topaz Labs not showing up after upgrade to CC 2014

    Has anyone noticed if their third party filters have been missing since upgrading to Photoshop CC 2014. I have lost all mine :-(

    Your 3rd party plug-ins are not automatically migrated to the new version.
    Check to see if the makers offer updated installers, and install them into Photoshop CC (2014).
    -Noel

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

    After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
    Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
    Issue is appaerently not unique for C4680 but also other HP equipment.
    Has anyone encountered this malfunction? If yes were you able to resolve it and how?

    Your screenshots are not appearing for me.
    Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
    Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
    Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
    If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
    If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
    If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
    Quit the MacKeeper app if it is running.
    Open your Applications folder: Using the Finder's Go menu, select Applications.
    Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
    You will be asked to authenticate (twice):
    You do not need to provide a reason for uninstalling it:
    Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
    After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

  • Contact list not showing up after upgrade to iOS5

    Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

    My contacts were still in place after upgrading to 5, but I could not get into them.  Clicking on a name would just freeze the Address Book.   Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone.   That solved the problem for me. 

  • Access point are not coming up after upgrade image of WLC

    Hi,
    I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
    In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
    7.0.116.0 (default)
    7.0.98.218 (active)
    so i reload  the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
    7.0.116.0 (default)(active)
    7.0.98.218
    So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
    After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
    But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

    Sunil,
         When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap:  < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
    The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
    Hope this helps.

  • IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

    We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
    Appearing following way
    UI_APPR_XML_PROVISIONER_EMPTY_TABLE
    UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
    We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
    Any help on this will be appreciated.

    May be your location credentials out of sync.
    Un-register and re-register the locations
    1)Right click the location in the Control Center manager and select Unregister
    2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

  • Mail.app time machine backup not showing anything after upgrade.

    Hi,
    I have gone from Snow Leopard to Mountain Lion, and I have a concern that my Time Machine backup now does not show any of my emails since the upgrade.
    Is this by design or has something more sinister occured?
    Gavin.

    Hi,
    No, thats the point the only email visible is from after the upgrade a week ago.
    My emails on this computer go back over a year, but I cannot seem to see them.
    Gavin.

  • External drive does not show up after upgrade to 10.8.3

    My external drive that has my Time Machine files do not show up on the display after I upgraded to 10.8.3

    This did not work.  I finally reinstalled OS X.  Now some drives will show up.  I still have oe that will not.  I have two laptops and all of the drives show up on the other machine.  My last problem drive is a seagate 1tb. 
    Right now I have too much other stuff going on to worry about this so I have put it on the back burner.
    sig thanks for trying to help. 

  • SXMB_MONI does not show payload after upgrade to SP15

    Hi there,
    We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
    Does anyone know if this is a know bug/functionality of SP15?
    Thanks,
    Roberto

    The other OSS note:
    SAP Note Number: 917885
    XI: Attachments werden im Message-Monitoring nicht angezeigt
    Version: 1, Note Language: EN, Released on: 01/27/2006 
    Symptom
    An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
    Error message is: "Format of the document cannot be displayed"
    Other terms
    SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
    Reason and Prerequisites
    Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
    Solution
    The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
    Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload.  We are going to apply it and see if it fixes the issue.  I will update this forum when i try it out.
    Regards,
    Jay

  • Some mail messages not showing content after upgrade to Yosemite

    I have just upgraded my system software to Yosemite and Have found that some of my mail messages are not displaying their content. I have closed and re-opened Mail and also taken all mailboxes offline and back online but the problem still persists.
    Does anyone have a solution to this problem?

    Hi Illaass,
    I've already rebuilt the mailbox several times. I have run disk utility, started my masc in 'safe mode', reset the PRAM and finally re-installed Yosemite again. This didn't solve the problem. I started my mac in 'safe mode' one more time today and than restarted my mac and the problem appears to have been sorted. However, I'm not sure if the problem will re-occur if I shut down my mac tonight and restart in the morning1

  • Siri not showing up after upgrade to IOS 6

    I have an IPAD 3. I updated to IOS last night. But I am not seeing Siri anywhere. Even Settings>General>Siri is not showing. I am wondering if I made an error in installing as another Ipad is showing Siri correctly. How do I fix this?

    Rang Apple support. They asked me to do a full restore. After an hour of effort, it promptly restored my backed up settings without giving a chance to choose SIRI again. I could have set-it up as a new Ipad but then all my data would have been lost.
    Think this is a bug. Hope Apple fix is sometime soon.

Maybe you are looking for

  • How do I print or export only selected cells in Numbers?

    Does anyone know how to do this in Numbers? I have been trying to do this for well over an hour...... I have looked at other posters' questions first, all the way back to 2008 in fact. The closest I have seen to an answer (and it is a workaround, not

  • Create a filename based on form content

    Hello, I always have a hard time explaining my question's but here goes. I have a button which saves a form once filled out. I would like to take the thinking out of this when it comes to naming the file and it create the name based on a numerical fi

  • Can I free up F9 from the sound controls? Need it for an application.

    Lotus Notes uses Alt-F9 and Ctrl-Shift-F9 for view refresh, but apparently all use of the F9 key on my user's Macbook Air is routed to the sound settings. I can't find out how to unset that.

  • Internal Oreder Error in FI posting

    Hi, in FI posting i got an error like The account assined object defined for other business areas while i'm posting telephone expenses in Fi anybody plz let me know how to resolve it Thanks, reddy

  • "Reporting a problem" doesn't let you report a problem

    I go to my account, click purchase history, click report a problem, click report a problem next to the billing item that is the problem and end up at the iTunes general support page. From there I try to find a contact us. I do but it takes me to a se