TFS and Build Server 2013 with CNAME
Hello Team
As we have TFS 2013 with Update 3 on windows server 2012 and another windows server 2012 machine have build server installed. It is working well with machine name and build is running properly.
Once i tried to change the machine with CNAME its not started and throwing error like below:
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than
MACHINENAME.
OK
I tried to disable loop-back, firewall rule already applied, DNS pointed to correct IP address, DNS Flush already done and also i tried to un-register and register to new one but getting same error. Unable to register with CNAME ?
BotheTFS 2013 and Build Server have version
TFS Build- 12.0.30723.0 (Tfs2013.Update3)
TFS Server- 12.0.30723.0 (Tfs2013.Update3)
Any help ... thanks in advance!!!
Thanks Ranveer Katiyar
Can someone assist me on this ? I am stuck and unable to configure CNAME to Build Server and getting error
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than MACHINENAME.
OK
Thanks Ranveer Katiyar
Similar Messages
-
Exchange Server 2013 with RADIUS authentication
Hello,
I am a student and doing an internship. I have to test Microsoft Exchange Server 2013.
I am using Windows Server 2012, I already installed Exchange Server 2013 on it and everything works as intended.
But I couldn't find out how to configure my Windows Server 2012 in order to authenticate my mailbox users from Exchange Server 2013 with a RADIUS server which is not on my Windows Server 2012. I have to use their RADIUS server, the RADIUS server from the
company where I am doing my internship.
I already created a NPS and added the RADIUS Client + Remote RADIUS Server Groups. I created a Connection Request Policies with the condition:
User Name *
I forwarded the Connection Request to the Remote RADIUS server that I created in Remote RADIUS Server Groups and then I registered the NPS in th AD. But it's still not working.
Maybe I did something wrong or I misunderstood something or does this even work with Exchange Server 2013? To authenticate mailbox users with a RADIUS server before they can login into their mailbox and use their mailbox?
Thanks in advance.On Wed, 26 Mar 2014 09:21:25 +0000, DavidIntern wrote:
I already put the NPS as a RADIUS proxy. I followed this check list http://technet.microsoft.com/en-us/library/cc772591.aspx
But the things is I want to make it work with our freeRADIUS2 that we have in place here. Without changing our freeRADIUS2. But I found out this is not possible since we are not using any Active Directory with it. Since I am still a newbie in this environment,
I am not sure if it is possible.
But my main question was if it was possible to use freeRADIUS2 and that my NPS would be the RADIUS proxy. So my question is answered, if I understood right, without making any changes to our freeRADIUS2 this is not going to be possible right? Because we have
no AD?
Our setup is freeRADIUS2 + MySQL database where all the users are stored.
As I mentioned in my previous response this really isn't the right place
for this question but why would you want to try to use a MySQL store for
authenticating against Exchange in the first place when you've already got
an authentication store (Active Directory) that is tightly integrated with
Exchange?
I still really don't understand what it is you're trying to accomplish nor
why you're trying to use such a complicated, convoluted method to
authenticate Exchange users.
Paul Adare - FIM CM MVP
Any sufficiently advanced bug is indistinguishable from a feature. -
Exchange Server 2013 with a RADIUS server (freeRADIUS).
Hello,
I am a student and doing an internship. I have to test Microsoft Exchange Server 2013.
I am using Windows Server 2012, I already installed Exchange Server 2013 on it and everything works as intended.
But I couldn't find out how to configure my Windows Server 2012 in order to authenticate my mailbox users from Exchange Server 2013 with a RADIUS server which is not on my Windows Server 2012. I have to use their RADIUS server (freeRADIUS), the RADIUS server
from the company where I am doing my internship.
I already created a NPS and added the RADIUS Client + Remote
RADIUS Server Groups. I created a Connection Request Policies with the condition:
User Name *
I forwarded the Connection Request to the
Remote RADIUS server that I created in Remote RADIUS Server Groups and then I registered the NPS in th AD. But it's still not working.
Maybe I did something wrong or I misunderstood something or does this even work with Exchange Server 2013? To authenticate mailbox users with a RADIUS server before they can login into their mailbox and use their mailbox?
Thanks in advance.Hi,
I suggest we refer to the following article to double confirm the Network Policy Server is registered properly.
http://technet.microsoft.com/library/cc732912.aspx
Thanks,
Simon Wu
TechNet Community Support -
Deploy Exchange 2013 , Lync server 2013 and shrepoint server 2013
Hi dears ,
I have a deployment requirement in which I have to plan for deploy Exchange 2013 , Lync server 2013 and SharePoint server 2013 on premise for 500 user and for one organization , now I have been asked to provide the software and hardware requirement
for this deployment .
so I wonder , is there any guide or link to find the hardware and software requirements for this deployment ?Hi,
You can refer to the link below about the hardware/system requirements for Lync Server 2013:
https://technet.microsoft.com/en-us/library/gg398438.aspx
Note: it is not supported to install Lync Server in the same computer with DC, Exchange Server and SharePoint Server.
If you want to deploy Lync Server, you’d better read the guide firstly before deploy it:
https://technet.microsoft.com/en-us/library/gg398616.aspx
For the deployment of Exchange 2013 and SharePoint 2013, you can also post case on Exchange and SharePoint forum, and there are more experts will help you:
Exchange 2013:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
SharePoint 2013:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Using calendar in OS X Mavericks. When it tries to connect to iCloud it gives me VERY annoying pop-up message, that it can't connect and that server responds with CalDAVAddSubscriptionCalendarQueueableOperation: 400.
Help me please, really need my calendar!Hello Steve
The simple and quick fix is right-clicking on that little Safe icon in the system tray (near the system clock) and choose Stop Backup/Synchronization. Do you see that icon?
Turn it on and off as needed. Did this work for you?
Scott -
Project Plan/Schedule for Project Pro and Project Server 2013 Install
Looking for a project plan/schedule for a dept. wide install of Project Pro and Project Server 2013. Anyone have one to share?
In Project Professional 2013 there are two templates:
Install Project Server 2013 and Upgrade to Project Server 2013. You may search for either template.
Here is a direct link:
http://office.microsoft.com/en-us/templates/results.aspx?qu=project&av=zpj150&queryid=312801ca-a859-48dd-af56-714e81c97cf4#ai:TC103345703| -
Deploying Windows Server 2012 and Exchange Server 2013
Hi All,
Our Clinet is planning to implement Exchange Server 2013 as an email solution. There is no Active Directory Domain exists in the environment. So, we have planned to configure a Windows Server 2012 R2 Standard as a Domain Controller and Exchange
Server 2013 Standard would be installed on another Windows Server 2012 R2 Standard.
The setup would be for 250 users. Please guide me about the Cost of OS + Exchnage and CAL for 250 Users.
Warm Regards,
Prosenjit Sen
Thanks & Regards, Prosenjit Sen.Another option would be to consider signing up for Office 365 instead of setting up the hardware and software for such a small number of users. It will take a long time for the cost of the hardware, maintenance, and support to be less costly than Office
365, if it would ever be less expensive. There is a lot of maintenance required for Exchange, so unless your client already has someone experienced in configuring and maintaining Exchange, there is a lot of expense in bringing someone up to speed to
perform those functions capably.
Just a suggestion. I do not work for Microsoft and I have no financial incentive to propose an Office 365 environment. I just know that if I were running my own business, I would have to be convinced that my business required its own internal
mail system when there are so many fully functional and capable mail systems available via subscription.
. : | : . : | : . tim -
Persistent Chat (Lync Server 2013) with Lync 2010 Group Chat
I have successfully deployed Lync Server 2013 and both 2013 and 2010 desktop clients connect and function as expected.
The problem is with Persistent Chat. It works perfectly with the 2013 desktop client but - whilst 2010 Group Chat connects - I receive the error message "The [LOGON_DOMAIN] is not available". No chat rooms are available and I am unable to search.
I have been unable to locate anything on the web which discusses the problem.
I do not know whether this makes a difference but the 2010 clients use terminals rather than dedicated workstations.
Can anyone shed any light on what the problem may be?Have you created a CsPersistentChatEndpoint to allow the Group Chat client (2010) to connect to Persistent
Chat server? Please take a look at: http://technet.microsoft.com/en-us/library/jj204901.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
I has successfully setup new Dev ENV of SarePoint server 2013 in VMware with 2 servers running om OS: win server 2008 R2 Ent SP1, AD + Central Admin Application Server.
After that the configuration of SharePoint App and WorkFlow Manager completed as well and many projects run perfectly,
And after installing SP1 of SharePoint server 2013, and running the SharePiont Configuration wizard to complete the configuration of the SharePoint Farm the Upgrade has fialed on Step2 with the following Error from the Log file:
Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Also after that I was not able to create like before a new site , and this creating end with error message as follows:
Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo.
Is there any solution to my problem with SharePoint server 2013 SP1, this supposed not to cause any bug in stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.Hi Daniel,
Thanks for replying on my post, actually I have downloaded the kb2880552 sp1 for
enterprise edition from the link
https://support.microsoft.com/kb/2880552 , and this has been experienced with me before since I had my Standalone Dev machine first installation, and the issue only occurred when the SP1 installed though.
Anyway, I've tried to install CU Nov 2013 http://support.microsoft.com/kb/2889944
but still facing the same issue,
I run the Setup of SP2013 from the CD to repair the SharePoint and error message appears,
The issue related to "Microsoft.Office.TranslationServices" is also related to running
the repair successfully which leads to the same error message above.
The Version of SP 2013 from the program file is : 15.0.4571.1502
The Update snapshot is as below:
Is there a problem with my sharepoint media file?
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS. -
Configure Workflow Manager 1.0 in Project Server 2013 with FBA
Hi,
Please suggest the ways to configure Workflow manger in Project server 2013 where PWA using FBA
we have tried for below situation, but no luck!!
The workflow manager configured using windows login account, we are associating a FBA site with workflow manager which is
Register-SPWorkflowService -SPSite 'http://FBAsite' -WorkflowHostUri 'http://workflowmanagerapplication:12291'
Following steps are taken care while creating workflow.
We have added users to the user service profile services
User profile synchronization is started
The user by whom we are logged is available in User Profile list
we are not running workflow with share point system account
Final step full synchronization of User Profile Application
Below the error we are getting when workflow run
Resume this workflow
RequestorId: 879e36f9-9db0-3c16-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["440"],"SPRequestGuid":["879e36f9-9db0-3c16-a91c-356d29becb34"],"request-id":["879e36f9-9db0-3c16-a91c-356d29becb34"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4605"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Sun, 15 Jun 2014 12:44:03 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)Hi Mafeer,
Since this issue is related to Project Server, I would like to recommend you to post there for more effective support:
Project Server General Questions and Answers
Thanks for your understanding. -
Exchange Server 2013 with 3rd party wild Card Certificate shows Invalid
Hi Team,
I've Exchange Server 2013 SP1. Imported a valid 3rd party wild Card Certificate but the status is continuously showing "Invalid" on all my 2013 servers. Any help?
Thank you.
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pkHello,
Can you enable it on the Exchange Services like, IIS, SMTP without any issues?
If the certificate is for OWA, is there any certificate issue when you accessing OWA?
Run the following command to get the Exchange Certificate information and post them for researching:
Get-ExchangeCertificate |FL
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Microsoft Project Server 2013 with SharePoint Standard 2013
Hi,
We are using SharePoint 2013 standard. What are our options to implement project web app into our SharePoint architecture? Please note that we are not using SharePoint Server.
Thanks,Project Server 2013 requires SharePoint Server 2013 Enterprise edition. Users that use Project Server functionality require a SharePoint Server Standard CAL, Enterprise CAL, and Project Server CAL.
I'm not sure I understand your last comment, SharePoint Server 2013 Standard Edition is SharePoint Server.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
On-Site Conversation Translator and Lync Server 2013
To Whom It May Concern,
I'm looking into deploying Lync Server 2013 Standard and I was curious as to whether there is a way to install the Conversation Translator as a service on-site. Meaning not using the service on the Internet. Similar to IBM's Websphere Application
Server where I can install a local instance on a closed network, have Sametime Connect point to that service, and translate the IM conversation.
I remember talking to a few MS folks a couple years ago, and they mentioned that it was going to be available as an add-on (or component) of Lync Server. Is this possible?
Thanks,
BrendanThere is a Client side plugin, take a look at:
http://channel9.msdn.com/posts/Lync-2013-Translate-a-conversation-from-one-language-to-another-in-real-time-part-one
http://voipnorm.blogspot.ca/2012/11/lync-2013-enabling-conversation.html
http://code.msdn.microsoft.com/office/Lync-2013-Translate-a-a849e513
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Hi,
I need to check the Service Pack level of Exchange Server 2013, from Registry.
I investgated for it, but the vale of product Minor version in Registry is same as of exchange server 2013 CU3 or any other exchange 2013.
So, please let me know, what is the proper way to identify the SP level of exchnage server 2013.
Thanks in advance..Use the powershell command
Get-ExchangeServer | Format-List Name, Edition, AdminDisplayVersion
This will provides what version of exchange server 2013 are using..
Refer the below article for more detail..
http://technet.microsoft.com/en-us/library/hh135098%28v=exchg.150%29.aspx
Exchange Queries -
Team Foundation Server 2013 with SharePoint Foundation 2013 - Search not available?
Hello,
we installed a TFS 2013 and let it deploy SharePoint Foundation on the same server. We are now faced with the fact that search in the teamsites is not working. I tried to get that search service up and running in a number of ways but it appears
as if there's no search service at all.
I have seen all the blogs where people are explaining how to provision a search service application for SharePoint Foundation but none of these ways work.
So, my question... is it possible to get it working?
PS. Please don't advice to post this on the TFS forum... I'm coming from there. They just closed my question as answered with the advice to post it in the SharePoint forum.
TIA,
BartWell,
When you go to the Search Settings in the Site Actions menu of a site, a message is displayed that there's no search Service. Which is kind of normal since there's no Search Service Application provisioned.
When I go to Central Administration => Services on Server => There's no Search Service.
When I go to Central Administration and I run the configuration wizard, there's no search service application to be provisioned.
There's a Search Administration section in the General Settings but it only displays the upper section. The lower section (with the Search Service Application information) just gives me nothing. An animated loading icon.
I tried to provision the services with psconfig (psconfig -cmd services -install) but there's still no search service to be found anywhere. After this, I do have a Search Host Controller service but when I try to start it in Central Administration, it just
gives me an error.
I'm starting to think it's not a full SharePount Foundation which is shipped with TFS.
The only thing we want to achieve is that a user can search for a document he uploads in a team site which is created by TFS. Seems not possible... unless I'm missing something here.
Maybe you are looking for
-
What happens to a VI when it is compiled?
Does LabVIEW put date-time stamps into the VIs or make linking changes or something unique to each compile? Is the compiled version of the VI only in memory? Would that mean all VIs saved on disk are not compiled?
-
Populate Multiple Items bundled in a single query
Hello, I am trying to create a report in which I have mulitple items that I want to populate. All of these use the same query but use different rows in the query to populate themselves. My question is:- Is there a way to bundle the item assignment in
-
Configure Service Desk in SAP Solution Manager
Hi guys, I'm currently trying to configure SAP Service desk to our custumers but i really dont know how much steps i must take to do that. Im currently have users from satellite systems generated by tcode BP_GEN in Business Partners. But, how it real
-
I RAN ADOBE SUPPORT ADVISER AND IT SAID cpsid_90243r4: Error DW020 or DW050 occurs during installation - Creative Suite 5.5, Flash CS5.5, Flash Builder 4.5 My laptop's running on windows vista home premium, sp2,32bit Intel(R) Core(TM)2 Duo CPU T7700
-
URGENT! Problem with reviewing in adobe pro 8.
Hi, I have a problem with reviewing in adobe professional 8. I map network drive and configure adobe pro 8 for reviewing, but when I restart the computer, the network drive appear in "My computer" but not in adobe professional 8, and everyday i recon