The 30 pin connector not workin with pioneer Avhp8400bh advanced app interface cable need to get 1 to market

Im very disappionted i just order a 30 pin lightning connector for $50.00 and just found out its not going to work with my Pioneer AVH-P8400bh addvanced app mode USB interface cable the reson i moved to I Phone was so I could use the advanced app mode in my car...both Apple and Pioneer are going to loose big unless they release a advanced app mode interface cable replacement for the i phone 5...own a Apple I Phone 5 and a Pioneer AVH-P8400BH..please help me get the word to Apple that they need to deal with this issue..very disappionted custumer..

I have a Pioneer AVH-P4400 and the Pioneer CD-IU201V USB cable and I'm experiencing the same problem.  The problem started after upgrading my Iphone 4S to ios6.  With ios 5.x the app mode worked fine.  I could watch Youtube and use a nav app to mirrow on the the screen. 
Does anyone know why App Mode doesn't work with ios6??

Similar Messages

  • P7N SLI Platinum - No power with the 8-Pin connector

    Been running the system since 03/2008  ...  Around 6-8 months ago, I had a problem where the PC wouldn't power on anymore, and I replaced the power supply with a new Corsair 650W PSU.
    PC has been used every day, no issues.
    Today (a few hours ago) the system just shut down.  When I try to power the system on again, none of the fans spin up...  They start for a fraction of a second (like 1/10th of a spin) but everything stops.  The red light on the motherboard stays on.  After turning off the power supply and turning it back on, everything will try to turn on again for a fraction of a second, then nothing.
    I thought maybe it was a power supply issue again, so looking at the Corsair website, they suggest testing the power supply by using a paperclip to connect the green with a black wire and when I did that, the fan in the power supply runs.  I disconnected power to EVERYTHING (case fans, disks, DVD drives, video card) except the 24 pin and 8 pin motherboard connectors.   Still won't power up.
     I started searching for other people with similar issues and found a few cases of the exact same problem (https://forum-en.msi.com/index.php?topic=132509.0;prev_next=next).  Reading what they did, I turned off the power supply, unplugged the 8-pin connector from the motherboard, and turned the system back on.  Now the motherboard powers up fine!  CPU fan starts spinning and everything.  Except the processor isn't going to work without that 8-pin power connector, right? 
      So is this a motherboard problem?  Any suggestions on how I get this fixed?

    Yes, around 6-8 months ago, the old power supply stopped working.  Smelled like an electronic fire or something in the room...  So I was sure that was the problem.
    I tried plugging the power supply in to my second computer, and it didn't work there either.  So the power supply burned up or something.  I replaced it with this new Corsair...
    Unfortunatly, my second computer is an AMD, or I could check the CPU to see if it would work.  I could try the power supply from the 2nd machine to make sure it's not the Corsair power supply, I guess.  But if we can't limit it to motherboard without testing the CPU, then I'm probably out of luck.

  • Lightning to 30 pin connector not charging my nano from my dock

    Is it just me, or does the Apple Lightning to 30 pin connector not pass charge correctly?
    I bought a new iPod Nano a few weeks ago, not realising I would be getting one of the new Lightning connector ones, so when I ordered my iPad from Apple I also bought a Lightning to 30 pin connector so that I can properly use my JBL dock (which is quite old, bought it with my old 5th Gen iPod). Although it's great that it connects and allows me to control the iPod with the remote control and is a **** of a lot neater than dangling it by a cable from the headphone jack to the RCA input on the dock, I'm getting really frustrated by the fact that I'm not getting any charge being passed through to the iPod from the dock. This was one of the best things about having a dock, not only could I play my music with a good quality sound from the speakers, I could also play it all day long without worrying about the battery consumption as it was being charged at the same time. Now, if I've been using the iPod at the gym through the week, I find that I'm having to take the iPod off the dock and charge via a wall charger or my laptop - the latter allowing me to rever to the old way of hooking the iPod to the dock via headphone jack. It's really annoying that I've spent so much money on something that doesn't do everything I'd expected of it. I'm wondering if it's faulty or if it's the age of the dock - which I haven't used with an iPod for about 5 years!
    Has anyone else had this problem?

    Have you tried resetting the dock by removing it from power?  What about resetting the iPod Touch? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • Can someone explain the functionality of the 50-pin connector inside the SCXI-1600 board

    Hello,
    please explain the functionality of the 50-pin connector inside the SCXI-1600 board.
    I would like to have the pinouts (explanation) of this particular connector
    kind regards
    the lab mouse

    Hi,
    Using the SCXI-1600 for anything other than controlling a SCXI chassis is NOT supported by NI!
    The SCXI-1600 is based on a 16-bit MIO board. There is some additional functionality that is not used while controlling the SCXI chassis. The SCXI-1600 has 8 analog input channels, 8 DIO channels, and 2 counters; there is no analog output support on this board. There is a 50-pin connector inside the SCXI-1600 that can be used to access all of these channels.
    Through Daqmx and Internal I/O filtering you can access these channels trough software. There is no pin-layout available because we do not support this.
    Regards.
    JV
    NI Belgium

  • Are there any headphones that work from the 30 pin connector?

    Are there any headphones that work from the 30 pin connector? Neither of my kids auxilary ports on their iPhone/iPods work.  Need another way to use with headphones.

    http://www.sonicelectronix.com/item_14260_1PR2-Universal-iPod-Adapter-to-RCA-Aud io-Connection-Cable-w-Charging-Capabilities.html

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • After REFRESH the cached object is not consistent with the database table

    After REFRESH, the cached object is not consistent with the database table. Why?
    I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
    in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
    Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
    JDeveloper.
    How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

    qkc,
    Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
    John

  • HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    You already have the software installed that you need if you have 10.8.2.
    If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
    Power up the Express for a full minute
    Hold in the reset button on the Express for 7-8 seconds and release
    Allow a full minute for the Express to restart
    Click the AirPort icon at the top of the Mac's screen
    Look for a heading of New AirPort Base Station
    Just below that, click on AirPort Express
    What happens?

  • How can i use my iPad 2 as a display via the 30 pin connector ?

    i want to use my ipad as a display from a range of devises like my video camer, computer and dvd player. The ipad outputs its display, so is there a way of using the 30 pin connector to input video?

    Hi there,
    At this time you cannot use your iPad as a display like you describe.
    However, you can buy the extra Camera Connection Kit, to import video and pictures from some camera's and SD Cards.
    I urge you to submit feedback to Apple:
    iPad feedback
    Nathan

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

    I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

    It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

  • Cannot publish Webpart - "Invalid SPlistItem. The SPListItem provided is not compatible with a Publishing Page"

    Hello All,
    I have seen this error message discussed in other posts on the forums here but the solution of deactivating and reactivating server publishing/infrastructure are not working for me. In fact I encountered additional errors when reactivating publishing at
    the site level. Powershell was necessary to reactivate site level server publishing.
    Here is detail of the error I get when attempting to publish:
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 18/11/2014 08:59:05
    Event time (UTC): 18/11/2014 08:59:05
    Event ID: e2e43649e2164e399fe0aa85892a002c
    Event sequence: 165799
    Event occurrence: 17
    Event detail code: 0
    Application information:
    Application domain: /LM/W3SVC/1827921427/ROOT-1-130607489469090399
    Trust level: WSS_Custom
    Application Virtual Path: /
    Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\portal.cooperstc.com443\
    Machine name: CTCSP2
    Process information:
    Process ID: 7392
    Process name: w3wp.exe
    Account name: COOPERS\svcSPPortalAppPool
    Exception information:
    Exception type: ArgumentException
    Exception message: Invalid SPListItem. The SPListItem provided is not compatible with a Publishing Page.
    Request information:
    Request URL: https://portal.cooperstc.com:443/CLG/Student/Videos/Pages/Test101.aspx
    Request path: /CLG/Student/Videos/Pages/Test101.aspx
    User host address: 10.33.50.119
    User: COOPERS\yangro
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: COOPERS\svcSPPortalAppPool
    Thread information:
    Thread ID: 41
    Thread account name: COOPERS\svcSPPortalAppPool
    Is impersonating: False
    Stack trace:    at Microsoft.SharePoint.Publishing.PublishingPage.GetPublishingPage(SPListItem sourceListItem)
    at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingPageStateControl.RaisePostBackEventForPageRouting(String eventArgument, SPRibbonCommandHandler control, RaisePostBackEventDelegate raisePostBackEventDelegate)
    at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingPageSaveAndStopEditHandler.RaisePostBackEvent(String eventArgument)
    at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    DeActive and then ReActivate Sharepoint Site Publishing Infrastructure feature at both Site And Web level Scope.
    To Deactivate at web level, Open SharePoint Site. Click on Site Actions -> Site Settings, then click on Manage site features and then Deactivate Publishing Infrastructure feature.
    Similarly you can deactivate at site level, Open SharePoint Site. Click on Site Actions -> Site Settings, then Site collection administration and then go to Site collection features. there deactivate Publishing Infrastructure feature.
    To Reactivate again the feature, follow the above steps.
    http://www.c-sharpcorner.com/Blogs/15338/invalid-splistitem-the-splistitem-provided-is-not-compatibl.aspx
    1.The simple thing is to try deactivate and reactive the publishing features both at site collection and site level.
    2. If the above doesn't work then proceed to below PowerShell script.
     $site = Get-SPSite "http://www.mysites/  "
    $web = $site.openweb()
     $correctId = $web.Lists["Pages"].ID $web.AllProperties["__PagesListId"] = $correctId.ToString()
    $Web.AllProperties["__PublishingFeatureActivated"]="True" 
    $web.Update()
    3. The key point is PublishingFeatureActivated bag which has to be true .
    http://webcache.googleusercontent.com/search?q=cache:5xpx-C9kKgsJ:nagendra-gunaga.blogspot.com/2013/11/the-splistitem-provided-is-not.html+&cd=4&hl=en&ct=clnk&gl=in
    If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

  • The creditors report is not matching with the G/L account

    Hi Gurus,
    The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
    Please give me advice,
    I will assign points
    Thanks&Regards,
    Kumar

    Hi Kumar,
    There could be three reasons.
    1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
    2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
    3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
    Hope this will help you. If not clear please reply, I will explain you.
    Pl. assign points if useful.
    Thanks

  • The vendor account is not associated with the file you are trying to open.Please try again.

    Please help me to understand what is the problem with the set up of the program. I bought an ebook from an internet site to which my IP address was blocked (in country 1). My brother bought it on a computer in country 2  and wanted to download and send me the file so I can open it on my computer. He set up initial download without Adobe ID. Afterwards he downloaded the pdf and send it to me. I tried to upload it  with my ADE reader but it didn't work without ID. My brother then deleted afterwards his ADE and installed it again, downloaded the ebook again but this time setting up an ID. He transferred me the file ,I used the same ID  but then the following message appeared "The vendor account is not associated with the file you are trying to open. Please try again." . Can this be fixed somehow? I cannot open the URLLinks even as there is no connection from my IP , but I have the pdf file ( ebook) but I don't know how to set up the program.

    Sorry Everyone this error message appeared in Digital Editions 4 used on a windows 8 laptop.  Thanks Chris

Maybe you are looking for