The Adobe Forms was created with Disable Fields!

Hi All,
I am new in Adode Interactive Forms ABAP. I am trying to implement a simple scenario using Web Services published by RFC on ABAP side and simple form with one field MATNR to bring a Description MARKT, and button to call the Web Services. I configured ADS on Server, installed Adobe LifeCycle 8 and SAP GUI 7.1. I created the Adobe Form and it was actived.
My issue is, when a run the program to generate a PDF, using the FMu2019s 'FP_JOB_OPEN'
, 'FP_FUNCTION_MODULE_NAME', CALL FUNCTION i_funcname, the Adobe Forms was created with disables fields. I canu2019t fill it and canu2019t press the button to call WS on ECC.
Could you help me?
Thank you!
Fábio Ferri
SAP Consultant Netweaver

Hi fabio,
When you say the example ran successfully is it without any error messages..?
Did you check in spool "SP01" if there something sitting out there.
To my understanding PDF rendring is dependent in 2 aspects.
1) the output device type you select (this should be a PDF enabled printer)
2) Programatically if you say it should go to a printer or spool.
Just try with FP_TEST_00 either in sfp or SE38 and try both print preview and print.
in print priview it should display the PDF on the screen.
In print it should display as success message and in spool it should have the corresponding PDF. if both are working fine then the ADS and output device config are correct and it all depends on how do you handle the PDF output.
Just try the above approach and post the results,
Cheers,

Similar Messages

Error in opening the adobe form to create a PCR

Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b>

Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b>

"the photo library was created with an unreleased version of iPhoto"

Help!
I think this all started with an onscreen message telling me I had a trojan. I downloaded a free copy of mac scan. This later asked me to subscribe. I could not get rid of the message except by switching off the computer, (I was tired and desperate), so I did.
I later tried to transfer photos from my camera to the the computer - it would not allow me - said it did not recognise the files.
Later tried to open iPhoto and it said "The photo library was created with an unreleased version of iPhoto. Please quit and upgrade this library by opening it in iPhoto 2 or iPhoto 4."
What have I done? How can I undo/rectify this???
Jane

If Larry's fixes don't wortk then Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I keep getting the message "the photo library was created with an unreleased version of iphoto. I have reinstalled but still get the message. What do I need to do?

I have had my iBook for years with iPhoto on and then suddenly today I get the message "The photo library was created with an unreleased version of iPhoto. Please quit and upgrade this photo library by opening it in iPhoto 2 or iPhoto 4. I reinstalled iPhoto but nothing has changed. What do I need to do to get it working again? Help!!

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Trying to split large library, I exported a folder of 3000 images to a new library. The new library was created with these images, but it still remained in the original library. How can I remove it from the original library while keeping it in the new l

Splitting a library does not remove the folder I moved from the original library. I exported a folder of 3000 images from the original library to a new library. The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?

The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
Exporting a library will create a duplicate of the exported library items. Usually you do this to work on a partial library on another computer and later merge the changed images back. Splitting the library is not the primary purpose of exporting.
If you want to remove the library items that you exported, select them in the source list of the library inspector and delete them (File > Delete Original Images and all Versions). Then empty the Aperture Trash, after checking that you did not trash more than you wanted.
But check, if the backup of your Aperture library is in working condition, and check the exported library carefully, before you do such a massive delete.
Regards
Léonie

If I purchase an entire season for a show, I should get it even if more episodes are added later right? Plus, how do I access an old account without access to the email it was created with?

Issue 1: I had purchased the entire season of Off Limits, and downloaded the available episodes when purchased, yet the season wasn't over. Since I purchased the entire season, I should be able to get the episodes added since then instead of having to buy them seperately like iTunes is asking me to do correct? Issue 2: Also, I had an old apple id on a computer that crashed and never got the chance to change it over to the new email even if the purchase was transferred via my iPod I was using at the time, and is on the pc i'm using now. Yet when I go to play this file, it asks for the password for the old email account (which I no longer have access to) and this has been nearly 7 years ago so I forgot what the password is to that acct. What do I do to rectify this and play this particular purchase?

Settings/General/Restrictions - Require Password=Immediately

Linn kinsky does not show all music folders - only the one which was created with wma but not the flac files wich where created with winamp

Who can give me advice - do i have to change settings in i pod touch or in the folders from my computer ?

Linn Kinsky is a app which helps you to control your LINN audio - streamer
This Kinsky programm is available for computers and apple products as well. So the Kinsky programm runs perfectly on my windos computer and after reading articles i decided to purchase a more handy ipod touch to control my audio-streamer instead of using the notebook.
unfortunately wma files are shown only. Meanwhile i ripped some cds as AIFF because I expected the problem here but nothing has changed.
Anyway thanks for your answer Matthias

Issues with iphoto after hard drive failure - message "library was created with an unreleased version of iphoto"

I have a late model 2008 13" MacBook that was running OS X 10.5.8 when the hard drive failed 2 weeks ago when I was traveling in Canada. I found a Mac repair centre and they replaced my 250GB with a 500GB hard drive and transferred my data. (Yeah!!!) I'm now on OS X 10.6.8 (which is great as I guess I should be able to sync my iphone on IOS 7 with my laptop again.... but I digress...)
I haven't been able to access my photos as I get the message "The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" when I try to open it. I can see my photos when I look on Photo Browser in Mail so that's good - they are here... I looked through past messages with this problem and saw that the advise was to download iphoto Library Manager. I want to be certain I don't mess anything up so the questions are:
1. What version of iphoto Library Manager should I download - I had OS X 10.5.8 and my iphoto library was ... (sorry - can't find out what it was, guess it's now 7.1.5)
2. What do I do after I've downloaded IPLM?
Many thanks ahead of time for any assistance

I backed up my iPhoto Library to an external drive even though it looked way to small to hold all my photos. I have tried several times to open iPhoto whilst depressing the option and command keys but get the same message again:
"The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" Behind this, the little wheel is turning and it says "Loading Photos" (but it doesn't).
I've got to access these photos for a project deadline that's looming so any help would be really appreciated.

Upgrading Library - "library was created with an unreleased version"

ERROR MESSAGE;
The photo library was created with an unreleased version of iPhoto.
Please quit and upgrade this photo library by opening it in iPhoto 2 or iPhoto 4.
QUESTION;
How in the world do you find a copy of iPhoto 4 to run on my new machine in order to upgrade my library?

that is a sign of a corrupted library - back up and launch iPhoto while depressing the option (alt) and command (apple) keys and rebuild the library using the first three options
LN

Iphoto library was created with a trial version, open version 2 or 4.....

hi, i apparently have an older version of iphoto that thinks its the "guardian" to all of my iphoto pics. i do have iphoto six, but when i try to open it, it says that the iphoto library was created with a trial version of iphoto, and that i should open version 2 or 4 to use that library. i can find no way to open version 6, nor can i find version 2 or 4. is it possible that i accidentally deleted these? and how can i get them back, so i can upgrade to version 6? thanks

I am having almost the same problem! I am not sure what happened to trigger this, but one day, I tried to open iPhoto, and it said that "This library was created with an unreleased version of iPhoto. Please open library with iPhoto 2 or 4." I have been runing iPhoto 5 for the past year!
I jsut bought iPhoto 6 today, hoping that if I installed the latest version, it would fix all of the issues. Well, it didn't! I can't even hold down shift+option when launching the application...once the library is selected, i get the same error message as before.
Can anyone help me PLEASE!!! i'm going to Maui next week, and need to get all of the photos off my camera before i go!

I deinstalled accidently support parts for my itunes, went to use it , failed, diinstalled itunes and reinstalled it, now i get a message saying itunes cannot wokr because it was created with an older version. what can i do?

i accidentaly deinstalled support pieces to my itunes. went to use it and it failed. apple told me to deinstall the whole thing and re-install it. I did this but still it failed. when i go to open it it reads "the file I Tunes Library. It! cannot be revealed because it was created by a newer version on I tunes". help?

I backed up my iPhoto Library to an external drive even though it looked way to small to hold all my photos. I have tried several times to open iPhoto whilst depressing the option and command keys but get the same message again:
"The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" Behind this, the little wheel is turning and it says "Loading Photos" (but it doesn't).
I've got to access these photos for a project deadline that's looming so any help would be really appreciated.

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

what's your home version (click help>about) and was that just a warning so you were able to open the file?

How to write a application using WDJ with the adobe form ?

Hi, experts,
I don't know how to write a application using !!webdynpro for java!! with the adobe form so that I can fill data to the adobe form and get data from the adobe form.
Note: I have configed the ADS(adobe document services),and I can create a application with a interactiveform in webdynpro for abap and run it successfully, so that I can fill data to the adobe form and get data from the adobe form.
Do you give me some hint?
Thanks a lot.
Best regards,
tao
Edited by: wang tao on Sep 9, 2008 8:59 AM

Hi,
Refers the following links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fd2d690-0201-0010-de83-b4fa0c93e1a9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c9a954-aa20-2a10-64bb-ea0835204e03
Thanks
Abhilasha.

The Adobe Forms was created with Disable Fields!

Similar Messages

Maybe you are looking for