The Aironet 1240AG Autonomous Web Interface authentication

Hi,
I would like to know if the Aironet 1240AG Autonomous, is capable to do Web Interface authentication (like a public hotspot, so no security on Wifi, but you will only get access to the network/internet when one has opened a Internet Browser and got an Username password challange from the Access Point )
I'm planning to use this methode to make a guest access wifi connection to Internet available.
Had this first with a propper WPA key, but lot's of guests had many dificulties to connect this way.
So now I'm want to try it on a way most users are used to due to the Web interface authentication they know from public hotspots (hotels etc. )

The only way I found to do this with autonomus is with third party software, that has the function known as "captive portal". You could try the sofware based on freebsd named monowall (its a firewall) with the captive portal feature.

Similar Messages

Aironet 2702i Autonomous - Web-Authentication with Radius Window 2008

Hi Guys,
I have a problems with case, i have diagrams sample like then : AD(Win2008) - Radius(Win2008) - Aironet 2702i => Use methods Web-Auth for EndUser
This is my Configure file on Aironet 2702i
Aironet2702i#show run
Building configuration...
Current configuration : 8547 bytes
! Last configuration change at 05:08:25 +0700 Fri Oct 31 2014 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Aironet2702i
logging rate-limit console 9
aaa new-model
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login DTSGROUP group radius
aaa authentication login webauth group radius
aaa authentication login weblist group radius
aaa authentication dot1x default group radius
aaa authorization exec default local
aaa session-id common
clock timezone +0700 7 0
no ip source-route
no ip cef
ip admission name webauth proxy http
ip admission name webauth method-list authentication weblist
no ip domain lookup
ip domain name dts.com.vn
dot11 syslog
dot11 activity-timeout unknown default 1000
dot11 activity-timeout client default 1000
dot11 activity-timeout repeater default 1000
dot11 activity-timeout workgroup-bridge default 1000
dot11 activity-timeout bridge default 1000
dot11 vlan-name DTSGroup vlan 46
dot11 vlan-name L6-Webauthen-test vlan 45
dot11 vlan-name NetworkL7 vlan 43
dot11 vlan-name SGCTT vlan 44
dot11 ssid DTS-Group
vlan 46
authentication open eap DTSGROUP
authentication key-management wpa version 2
mbssid guest-mode
dot11 ssid DTS-Group-Floor7
vlan 43
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 013D03104C0414040D4D5B5E392559
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
dot11 ssid SaigonCTT-Public
vlan 44
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 04480A0F082E424D1D0D4B141D06421224
dot11 arp-cache optional
dot11 adjacent-ap age-timeout 3
eap profile DTSGROUP
description testwebauth-radius
method peap
method mschapv2
method leap
username TRIHM privilege 15 secret 5 $1$y1J9$3CeHRHUzbO.b6EPBmNlFZ/
username ADMIN privilege 15 secret 5 $1$IvtF$EP6/9zsYgqthWqTyr.1FB0
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 46 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid DTS-Group
ssid DTS-Group-Floor7
ssid L6-Webauthen-test
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
stbc
mbssid
packet retries 128 drop-packet
channel 2412
station-role root
rts threshold 2340
rts retries 128
ip admission webauth
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface Dot11Radio1
no ip address
shutdown
encryption vlan 46 mode ciphers aes-ccm
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 45 mode ciphers ckip-cmic
ssid DTS-Group
ssid DTS-Group-Floor7
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
peakdetect
dfs band 3 block
stbc
mbssid
packet retries 128 drop-packet
channel 5745
station-role root
rts threshold 2340
rts retries 128
interface Dot11Radio1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed auto
dot1x pae authenticator
dot1x authenticator eap profile DTSGROUP
dot1x supplicant eap profile DTSGROUP
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface BVI1
mac-address 58f3.9ce0.8038
ip address 172.16.1.62 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius server 172.16.50.99
address ipv4 172.16.50.99 auth-port 1645 acct-port 1646
key 7 104A1D0A4B141D06421224
bridge 1 route ip
line con 0
logging synchronous
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
end
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: S-1-5-21-858235673-3059293199-2272579369-1162
Account Name: xxxxxxxxxxxxxxxx
Account Domain: xxxxxxxxxxx
Fully Qualified Account Name: xxxxxxxxxxxxxxxxxxx
Client Machine:
Security ID: S-1-0-0
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: -
Calling Station Identifier: -
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
So i will explain problems what i have seen:
SSID: DTS-Group using authentication EAP with RADIUS and it working great (Authentication Type from Aironet to RADIUS is PEAP)
SSID:L6-Webauthen-test using web-auth and i had try to compare with RADIUS but ROOT CAUSE is AUTHENTICATION TYPE from Aironet to RADIUS default is PAP. (Reason Code : 66)
=> I had trying to find how to change Authentication Type of Web-Auth on Cisco Aironet from PAP to PEAP or sometime like that for combine with RADIUS.
Any idea or recommend for me ?
Thanks for see my case

Hi Dhiresh Yadav,
Many thanks for your reply me,
I will explain again for clear my problems.
At this case, i had setup complete SSID DTS-Group use authentication with security as PEAP combine Radius Server running on Window 2008.
I had login SSID by Account create in AD =>  It's work okay with me. Done
Problems occurs when i try to use Web-authentication on Vlan45 With SSID :
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
After configured on Aironet and Window Radius , i had try to login with Account create in AD by WebBrowser but it Fail ( i have see mini popup said: Authentication Fail" . So i go to Radius Server and search log on EventViewer.
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
Im think ROOT CAUSE is :
PAP is the default authentication type for web-auth users on Aironet 2702i, so it can't combine with Radius Window 2008 because they just support PEAP (CHAPv1,CHAPv2....) => Please give me a tip how to change Authentication Type from PAP to PEAP for Web Authentication on Aironet

Aironet 1100 series web interface times out after few mins of inactivity

Hello,
I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
Thanks much for all your help.. really appreciate it.

Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
Thanks :)

Procurve 2910al Web interface authentication using Radius

I have a Procurve 2910al switch and I'm trying to use our radius server to authenticate when we access the web interface. Currently, I have am able to authenticate from our radius server using ssh so I know our radius server works. However, when I log into the web interface, it logs me in as an operation and not an admin. I have the following commands enabled: radius-server host x.x.x.xradius-server timeout 2aaa authentication ssh login radius localaaa authentication ssh enable radius localaaa authentication web login radius localaaa authentication web enable radius localno web-managementweb-management ssl what am I missing? I'm on W.15.14.0012 ROM 14.06 Thanks,Jasper

Using the Web Authentication feature on a Cisco wireless LAN controller, we can authenticate a guest user on the wireless LAN controller, on an external web server or on an external database on a RADIUS server. We can configure the wireless LAN used for guest traffic to authenticate the user from an external RADIUS server.
To enable an external RADIUS server to authenticate traffic using the GUI, follow this link.
http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html#wp1001207

Variables in BPS populating the template built using web interface builder

Hi All,
I have a issue :
I created some variables in bps0 (under a planning area) based on Fiscal Year, Fiscal Year/Period, Posting Period, Cal. Yr /Quarter and Version.
Then I created a template using the web interface builder .
The end user goes and puts the varaibels in the SEM template and that will run the BW queries in BW (ABAP code has been written to popluate the values entered in SEM tempalte in to BW variable screen).
Now the problem is it works well for all values other than for #(not assigned).
What should be done to make it work even for #?
We do not have # as the value in master data for all the above info objects. We have # only for 0version and for the rest I can't even see the master data as it says " master data is not maintained" .
when I come back and look in bps0 then I see that the values entered in the SEM template are getting accumulated in selection conditionds in bps0 (when we click on the variable then when we see the selection conditions there it is getting accumulated)
Can anyone please suggest a solution to make the # (not assigned) work and to clear the selection conditions table after refresh of the SEM template?
Thanks
Sri

Hi
You should create a BEX Web Query and integrate it in the upper level of WEB Layout.
Check this link for a step by step guide about this topic
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/bi/nw04/how%20to%20integrate%20bex%20web%20applications%20into%20bps%20web%20interfaces.doc
Ciao
Andr

Aironet 1250 losing Web Interface

Hi;
I configured the bvi interface with a fixed ip address and i am able to ping it and configure it via telnet/ssh. But when i try to configure it via Web Interface it authenticates with my local Usr Credentials and allows me to login, and then if i want to do anything else once i am connected it keeps asking the Usr credentials again and never authenticates. Could someone help me with this ?
Thanks in advance
Rams

I didn't configure too much on it. Just created some username and password and a secret password. And when i connected using Web interface using my usrname and psw it is only allowing to level 1. And if i connect using no usrname and my secret psw it allows me to level 15.
Is there anyway i can tell it to allow to level 15 with my usrname and psw?
Thanks in advance.

Aironet 1240AG error - "Previous authentication no longer valid" Help!

Greetings!
I am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
And at first, it is not!
I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
The error I get in the log is
Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
But now I believe I must have some setting wrong.
Could someone please shed some light on this situation for me! I searched the forums but could not find this error message in this context.
Thanks!
Nate York

Interesting...I am experiencing the same problem, but when adding another laptop to the existing 5 Aironet 1100's. The existing laptops work fine, but when trying to add another node, I see the problem. I get the following error message in the error log as well as the activity screen;
Interface Dot11Radio0, Deauthenticating Station 0002.2d34.a0fe Reason:
Previous authentication no longer valid
Unit - 6 units
Cisco Aironet 1100 version 12.3.(07)JA
The error takes place with no other units online, or when other units are in use. Also the laptop in question "shows" connected to the AP (yes I have tried other APs all with negative results). The settings on the laptops are all the same, so i am at a loss.
Any suggestions greatly appreciated,
Ralph

How to insert the logo of my company in the web interface page

Hi Experts,
I have created one web interface using the web interface wizard. I have to show logo of my company in the page created by web interface wizard. I think I can do so by creating one sub compnent called 'Text, Image, HTML'. Here I can change the property of text. I can click on property of text and then select 'Edit long text' option.
Then I can insert the HTML code. The HTML code can call the image.
I am not sure from where the HTML page will call the logo of my company. I think logo should be stored in the server or any other place.
Can you please let me know how to sort out the issue.
Thanks

Hi Raja,
The link mentioned above is not working. Can you please let me know the solution. I have done following to get the result:
1) Have uploaded the image in MIMEs at following location. The .jpg is located at following place in SE80:
$TMP project1 --> BSP Library --> BSP Application --> ZIO_MY_WEB_INTERFACE --> MIMEs --> myimage.jpg
2) I have created one subcomponent 'Text, Image, HTML'.
3) I have set the property HTML of this subcomponent as 'true'.
4) I have set property 'Text' as follows.
Clicked on value of attribute field of 'Text'. Here I have selected Edit long text. Here I have done HTML coding. Can you please let me know what should be the path of image file here:
<html>
<html>
<p>
<img src="c:\image002.jpg">
</p>
</html>
</html>
I think path should be some thing like as follows:
img src="??"
I want to know what will be value for ??
Thanks

Open Bex workbook from BPS web interface,How hard it could be?

Hi all,
    I want to add a link or function-button in my BPS web interface,hope it could open a query(excel analyser),I tried 2 methods as follow:
   1. MIME , It can only open a static excel file, not a analyser query. I gave up this method.
   2. I use the program RRMX_START_EXCEL and add a plan function which is a EXIT in BPS0,in my EXIT function I used some code in RRMX_START_EXCEL,I test it in BPS0 ,it works ,it can open a analyser excel query.But when I put this plan function(including a parameter group ) in BPS_WB ,when I click the function-button in web interface, it crashed,says:
Error when processing your request
What has happened?
The URL http://bw1.:8000/sap/bc/bsp/sap/zwebcaxa001_998/page1.htm was not called due to an error.
The termination type was: TH_RES_FREE
and some other Error infomation,
Is it possible to realize my requirement? or Web interface and analyzer are just 2 total differrent things ,it is not possible to realize this?
thanks all

Hi Denny,
Have a look at www.javascript.internet.com and do a search for "whatfile".....
This should give you the javascript code whereyou can enter a file name (say an excel file name) and click a button to navigate to it.
Although I have not tried exactly what you have asked, I have successfully used parts of this code to open specified files (excel files) on our local directory from a BPS planning web page.
Obviously you will need to adapt the code to your specific evironment/situation...
Good luck.
Rael

SEM-BPS 6.0 BPS_WB generate Web Interface BSP

Hi all,
We recently had a redirect of the portal connected to our NW04S BW development system and had worked thorugh the issues on the portal side so existing Iviews works (SEM-BPS 6.0).
We are now creating some new iview for a new applications but I cannot generate the BSP page. BPS_WB say that the BSP was generated correctly but when I try to test it, it says that http entry is missing and would I like to add it and when I say I do, it fails since I cannot generate a node under SICF since I do not have the authorization. I did an SU53 check and asked for 01 create on S_ICF_ADM but getting a lot of questions since 01 on S_ICF_ADM is reserved for Basis only on this project.
Another thing we are also concerned with is that some system settings that need to be done on the BW side might now have been done although Basis said all entries are changed..
I have to admit that the last time I worked with someone to set up portal connection to BPS was back in 2003 so I have to dig pretty deep into my memory and had been doing some quick searches but have not found anything obvious yet that would solve the regeneration issue except for the authorization addition which they are very hesitant about.
Any information or thoughts on this issue / problem would be appreciated.
Thansk,
Mary

Hello Mary,
I still work on BCS, so dont have BPS here. What I can do is to give you a summary of those things I had done in the past. Maybe it helps?
I gues you know that there are 2 diffren types of nodes: System nodes to enable connection to the web and the node for each web interface.
The required system nodes are describes in OSS 517484. I guess you have released them? Since BW Release 3.5 the web interface works with HTMLB. I guess you have activated thise too?`So the last possibility is from my point of view the web interface itself.
The node for the web interface existis already?
/default_host/sap/bc/bsp/sap/<your_web_interface>
In develop system the web interfaces will be activated manually normally. But in Prod automaticall because of not allowed customising. If the web interface has created such an entry already I think the only chance is to give the web interface another name in Development system - or to delete the existing node in the prod system (dangerous).
If this is not your problem, maybe another consultant has an idea?
regards
Eckhard Lewin

Is it possible to create framework folder libraries in teh standard web interface

I'm just setting up a system and using a VDI so it will take me a while to get the desktop integration installed. Using the standard 16200/cs web interface, under the top level of framework folders is Enterprise libraries and I want to create some libraries under the but there's only View and Search options available. is it possible to create them using the old interface?

Srinath,
that's a revelation! So, I could enter something like
http://my.contentserver.com/cs/idcplg?
IdcService=FLD_CREATE_FOLDER&fFolderType=owner&fParentGUID=FLD_ENTERPRISE_LIBRARY&fFolderName=<MyFolder&fOwner=Martin&IsJava=1
straight into the browser? (will try it now)
How complex can such a call be? Could I create a hierarchy of folders and subfolders and set metadata this way? How easy would it be to do this from a JDE business service?

WRT160Nv3 - Clicking "wireless client list" button kills WRT160Nv3 web interface.

Clicking the "Wireless Client List" button on the "Wireless MAC Filter" page causes a new Internet Explorer instance pop-up containing the the error: "Internet Exploer cannot display the webpage".
After the error appears, I can no longer access the WRT160Nv3 via it's web page interface. I just keep getting the above error message. But I can bring up a command prompt and sucessfully PING the WRT160Nv3. I just can't get back to the WRT160Nv3 router's web interface.
If I wait about 24 hours (or so) the WRT160Nv3 web interface is accessable again.
Why is this happening, how do I correct it and how do I get a list of all the wireless devices connected to my WRT16Nv3 router?
Thank you.

Okay, I'll assume the solution of resetting (and then recofiguring) the WRT160Nv3 router gets the router's web interface working again.
But how do I see which of my client devices are actually connected to the WRT160Nv3?
Clicking the "wireless client list" button appears to causes a problem for the router's web interface and then requires resetting and reconfiguring the router.
It seems like I still don't have a solution that shows me which devices are connected to the router. And I have to reset and reconfigure the router if I attempt to invistigate which devices are connected to the router.
Any additional insight would be appreciated.
Thank you;

WRT54GL Web Interface Broken - Failed Firmware Update - Router Works

I have a WRT54GL v1.1 router. I tried to update the firmware, using what I thought was the newer firmware, apparently somewhere I mislicked and didn't get what I thought I was getting. It succeeded, but now the web admin interface is totally broken. It loads, but there are no link or text, I can seem some form fields with some data, but mostly it's like seeing the page with NO content or navigation (though I can see the layout correctly). This means I can't change any of the router settings.
My internet still works. Wireless works (I just have no way to secure it now). I have tried to usu TFTP to upload the correct drivers from this web site. It says "Cannot Connect to Server" or something like that when it tries. I have pinged the router and it works. I have tried to assign a static IP (192.168.1.100) and then have TFTP start as soon as I see my continuos ping start to get a result. It still says the same "Cannot Connect" type of message.
I have also tried to see if the router has some kind of "Management Mode" by holding the rest button, unplugging the router, plugging it back in, waiting 10 seconds and releasing then waiting a minute and going to 192.168.1.1 and it looks like the same exact broken web interface I normally get. It doesn't appear to go to a "Management Mode."
The power light is not blinking.
Help!
Screenshot of Broken Interface

What was the procedure you followed to upgrade/re-flash the firmware through TFTP?
As TFTP firmware upgrade was failed follow the below mentioned steps.
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Aironet 1240AG - cant use the web interface

I am trying to configure a new Aironet 1240AG. After it picked an ip address from the DHCP in my lan, I still can't log in using the web interface. I am using an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find server. please i need assistance

Hi Obinna,
Sorry about the link :( The problem here is the fact that 12.3.(11)JX is a Lightweight image. Have a look;
Warning: All Cisco Aironet Access Points receiving Cisco IOS Software Release 12.3(11)JX will only function in conjunction with a Cisco Wireless LAN Controller. They will no longer be able to function as Cisco Aironet Autonomous Access Points.
This product bulletin describes the content and delivery information for Cisco IOS Software Release 12.3(11)JX. This is a Cisco Lightweight Access Point Protocol (LWAPP) upgrade and recovery support software image supporting Cisco Aironet 1100, Aironet 1130, Aironet 1200, Aironet 1230 AG, Aironet 1240 AG, and Aironet 1300 Series Access Points.
http://www.cisco.com/en/US/products/ps5861/prod_bulletin0900aecd804b1a72.html
You can use this method to convert the AP back to Autonomous Mode (and access via Web);
Reverting the Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Using a TFTP Server to Return to a Previous Release
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 5 Disconnect power from the access point.
Step 6 Press and hold MODE while you reconnect power to the access point.
Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
Hope this helps!
Rob

TACACS Authorization of Web Interface on Aironet 1200 AP

I have the Aironet 1200 AP setup to authenticate and perform authorization for the CLI via TACACS. That is working fine.
However, the web interface is failing "ip http authentication". (Slight caveat - it works for a local user in the local AP DB - it does not work when it goes to CiscoSecure ACS to authenticate/authorize).
I can get to some pages (prompt and pass authentication), but certain pages (e.g. Services>>SNMP) where configuration steps are taken cause a second prompt is presented, username and password is provided, and it fails.
This is only evident from the output of a "debug ip http authentication"
What do I need to configure in ACS to make this work?
Relevant portion of config:
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ local
no ip http server
ip http authentication aaa
ip http secure-server
Sep 7 13:40:59.885: HTTP AAA picking up console Login-Authentication List name: default
Sep 7 13:40:59.885: HTTP AAA picking up console Exec-Authorization List name: default
Sep 7 13:40:59.909: HTTP: Authentication failed for level 15
Sep 7 13:41:06.757: HTTP AAA picking up console Login-Authentication List name: default
Sep 7 13:41:06.757: HTTP AAA picking up console Exec-Authorization List name: default
Sep 7 13:41:06.780: HTTP: Authentication failed for level 15
This document appears to describe a scenario similar to mine, but is for http - not HTTPS:
Local Authentication for HTTP Server Users
http://www.cisco.com/en/US/customer/tech/tk59/technologies_configuration_example09186a0080178a51.shtml#tac-win
Any ideas what I may be missing here?
Thanks,
Jeff

I found the answer was to use a more specific "ip http authentication" statement. Specifically,it required the following:
CiscoSecure ACS:
Group Settings
Shell (exec)
Priv Level = 15
On the AP:
had to enable:
ip http authentication aaa login-authentication AP_Web (Named Method List)

The Aironet 1240AG Autonomous Web Interface authentication

Similar Messages

Maybe you are looking for