The App Store update page has gone blank on my ipad, any clue why or how to fix?

The App Store update page has gone blank on my ipad, any clue why or how to fix? Updated everything and synced. App Sore icon shows there are updates.

Until Apple resolves this problem, when you are in the App Store, if you have updates, try going to your "Purchased" Apps and you can update from there. Apps with updates will show "Update" next to them, just tap on "Update" and the update will be installed.

Similar Messages

  • I can not update my installed apps from the App Store Update page.  I can individually update from the App Store Purchased page.  I tried a soft reset but still unable.  Any suggestions?

    I can not update my installed apps from the App Store Update page.  I can individually update from the App Store Purchased page.  I tried a soft reset but still unable.  Any suggestions?

    You are doing all that you cn do right now other than to update the apps in iTunes on your computer and sync them to the iPad.
    There has been a problem with the App Store updates tab for a few days now and we are all waiting for Apple to fix it.
    Look at all of the discussions on the iPad forum that are talking about this right now.

  • How do I remove my updated apps out of the App Store update page on my iPhone 5?

    If I open the App Store from my iPhone 5 - there is a queue of EVERY SINGLE APP (which I have already downloaded and updated) and the queue is getting longer by the day as it dates back to September 21. I've owned and used every iPhone since the Day One release of the original iPhone and have never seen anything like this. That has given me a pretty good amount of knowledge and experience with Apple devices, iTunes and troubleshooting - but I cannot seem to find the cause of this aberration. I think I'd better ask for an exception - because after spending what I've spent on all Apple products? This one is on-the-house! Still, if you've beaten this same exact issue - I gladly welcome and appreciate your solution(s)!!

    There is, currently, no way to remove them. Whether by design or not, is not known. I thought they rolled off after a week, but I can confirm they don't.

  • After upgrading to 10.9.3, there are three copies of the software update entry in the App Store update page. What gives?

    I have no idea what to make of this. Additionally, when I tell it to check for updates, I now get this error:
    Any thoughts?
    Aside from this updating error, there are no obvious problems.

    Looks like you will have to wait. Apple forgot to update the software certificate .
    https://discussions.apple.com/message/25889967#25889967

  • Home page has wrong name on it and dont know why or how to fix this

    when my husband logs into xfinity... in the little box on the upper left hand where you are supposed to be signed in... my name appears.. not his.. so he signs himself in and it goes back to my name and not his... and this is on HIS computer.. not mine.. It is driving him nuts. how do we keep him signed in?? he does get his own email.. but my name is still there..

    After he signs in:
    On the left side of the page, you will see the name.
    CLICK the name.
    His profile page will open.
    Click EDIT next to the name that appears.
    Change the name, click Save Settings.
    If it works, there will be a name change sucessful message just above the name.
    Go back to the home page.
    Refresh the page to see the new name.

  • After iOS 8.3 update, apps stuck on OPEN on App Store Updates page

    Did the iOS 8.3 update by backing up my iPad Mini in iTunes then doing a "Restore". I did that with the last update and all went fine. This time, it appears to have gone well except that I had some apps that had updates pending after the Restore. After doing the updates, when I go to the App Store "Updates" page, I still have 4 of my apps listed there with the button option set to OPEN. On the upper right corner it says "Updated August 18, 2015". Yesterday when I did the update was Saturday April 25, 2015 - go figure. When I tap them they all open but they never leave the page. One post said to wait until an app had a valid update pending and see what happens after I update it, so I'll need to wait to see if that works. I have searched this community and tried all suggestions: changed the date set to manual and push it out over 30 days. That did not work. Did a reset. No luck. I even did another "Restore" thinking maybe that would resolve it, but they came right back. The puzzling thing is that in all of my searching, I have found apps stuck in differing states of "waiting" or "downloading", but none of them have mentioned seeing the apps with the OPEN option visible. I did delete the apps and that made them go away, but I'd prefer to keep them. Any suggestions would be sincerely appreciated. Thanks in advance...slog

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • App Store update page doesn't update

    I'm finding that frequently the App Store update page says all apps are up to date, yet there is a badge telling me there are updates.  This is really annoying as the only way to see the updates, is to exit the App Store app, kill it and run it again.  Under iOS 5, I could simply tap the update button at the bottom to refresh the page, but that doesn't work in iOS 6.  Why isn't there a refresh button in the App Store?

    I've noticed the very same thing - only after purchasing my iPhone 5 which is, of course, running iOS 6. Since then, my wife has updated the trusty old iPhone 4 she "inherited" to iOS 6, as well. Haven't checked whether the App Store is behaving this way on her phone but I'd be surprised if it didn't. The "tap to refresh" function in the pre-ios6 App Store app was fine. I would've expected Apple to incorporate the "pull to refresh" method they're now using but that's not available either.

  • TS1702 Apps are 'frozen' on App Store Update Page - After Updating

    I've gone from non-stop App Store updates to zero App Store updates on my iPhone 5.
    However, the App Store Update Page just will not clear now. All are downloaded and that usually clears this page until the next updates are ready for download.
    Anyway, no luck ridding myself of these already downloaded Apps from the App Store Update Page. I
    I've opened each App from this page, tried force closing the App Store and rebooting etc.
    I tried deleting all the "frozen" Apps. They disappeared from the App Store update page. But once I went and downloaded the Apps again (this time using iTunes (to circumvent the device App Store) they appeared right back on the same page.

    There is, currently, no way to remove them. Whether by design or not, is not known. I thought they rolled off after a week, but I can confirm they don't.

  • I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:     InPageError   Error Status Code:     c0000185   Faulting Media Type:     00000003   OS Version:     6.1.7601.2.1.0.768.3. Any clue why or how

    I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:
    InPageError   Error Status Code:
    c0000185   Faulting Media Type:
    00000003   OS Version:
    6.1.7601.2.1.0.768.3. Any clue why or how to fix?

    InPageError
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards?

  • How do i log out off the app store as it has the wrong email and I can't do my updates as i don't know the password

    How do i log out off the app store as it has the wrong email and I can't do my updates as i don't know the password

    Go to Settings > iTunes & App Store, tap on the Apple ID, and choose 'Sign Out'.
    However, logging out of the iTunes & App Store won't change the Apple ID you need to use to update an app.  It only affects what Apple ID you're using to download a new app.
    Apps always have to be updated using the Apple ID that was used to download it originally.  Go to iforgot.apple.com to reset that password.  If you cannot do so, then contact Apple Account Security, or delete the app and redownload it using an Apple ID and Password that you know.

  • How can I fix the problem in my iPhone 4s where the app store updates screen is blank?

    I have a problem with the apps store updates in my iPhone 4S.  It doesn't display the updates, it's just a blank white screen.  I tried hardstarting my phone a number of times, holding the home button at startup when the apple logo appears until it dissapears but the problem still persists.  Can anyone show me how to resolve this problem?
    Many thanks!

    anthonyramos wrote:
    It will be 50 degrees out and it will see its 2 degrees or 3 degrees.
    It is perfectly accurate.. it is simply not showing 50 degrees because you have it set to Celcius.
    Change it to Farenheit and it will display what you are accustomed to.

  • In app store updates, i get a blank page

    On my iPhone 5, it appears that I have several updates, but when I go to the App Store (update tab), it's just blank.  I re-started the phone to no avail.  I'm on a wifi connection, so I don't think it's a connection problem and I CAN see new apps at the store.  Any ideas?

    Hey all
    Like some of you have said turn the phone off and on again if that doesn't work reset your phone ill leave a article below of how too
    http://support.apple.com/kb/HT1414
    Cheers

  • Is there a known issue with the apple app store update page for th ipad?

    Is anyone else getting the ipad app store update page problems?
    When i go to that page on my ipad i get an error " cannot connect to itunes store " but im allowed to still browse the store. Just cant update my items through he update page..... I do have full bars on my wifi :)

    I'm not sure that either of these will work, but you can give them a try.
    Sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    Here is the Apple help article for more advanced iTunes Store troubleshooting steps. You might want to look at this.
    http://support.apple.com/kb/TS3297
    I don't think that this will be the issue - but it can't hurt to look and make sure.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first.

  • After upgrading to 10.9.5, the App Store "Update" button stopped working.

    After upgrading from 10.9.4 to 10.9.5 tonight, the App Store "Update" button seems to have stopped working.  The App Store says I have one update available (Xcode version 6.0.1), but when I click "Update," the button turns white for a few seconds, and then it turns back to gray without doing anything.  I've tried the same steps after restarting my computer twice.
    A screen shot is below.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • The App Store updates show a discrepancy

    The App Store updates show a discrepancy:
    App                    Version          File info
    Keynote          6.0.1          5.0.3
    Numbers          3.0.1          2.0.3
    Pages          5.0.1          4.3
    Couldn't send a simple message.
    Phone support asked many silly questions then told me I have to pay 49 Euros to get an answer.

    Bob -
    I see you have the version numbers as shown in the App Store.
    I don't.
    App Store announced the latest version but the download yielded those I mentioned.
    App Store doesn't let me try again, so ...
    Can you help me to trigger "This solved my question"?
    Regards
    Peter Fackelmann

Maybe you are looking for

  • Can't view Wordpress PHP files in Dreamweaver CC.

    Mac. MAMP. I have downloaded my full site hosted on xxxx into MAMP htdocs. Download directly from root public_html on host. I keep getting "Dynamically-related files could not be resolved because the site definition is not correct for this server" Ev

  • Zen Micro problem need help

    Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to re

  • Combining png files with Acrobat 9 Pro reduces image resolution

    Combine creates a PDF with much lower resolution than what results if I insert the png images into an existing PDF. I choose the highest resolution option I see on the Combine screen. Inserting the png files one at a time is too time-consuming for 24

  • Interact with SAP

    Hi @ALL, can anyone say me, how can i call an RFC (SAP) from an PL/SQL-Block? the technic must be stable! every hint are welcome! nice day, daniel

  • Exporting mail from specific subfolders only via powershell

    I am trying to create a powershell script to export mail from the specified subfolder of the inbox of an exchange 2010 mailbox to a PST.  For example, if Bobs mailbox has a folder in the inbox called salesinfo and this needs to be exported to a PST,