The application MIDISPOT remote can't open because PowerPC no longer supported, what do I do about that?

so what do I do about that?

PowerPC support was dropped with 10.7. You either need to downgrade to 10.6 if possible or find a 10.7 compatible version.

Similar Messages

You can't open the application Longman Paper CD-ROM Installer because PowerPC applications are no longer supported.

I found this message You can't open the application Longman Paper CD-ROM Installer because PowerPC applications are no longer supported when I was trying to play cd rom of longman preparation courses. I used the external LG dvd writer to play the CD.

That is correct.
OS X Lion will not support any Power PC application.

Ok so I have OS X Lion now and this is what I get: "You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

ok so I have OS X Lion now and this is what I get:
"You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

look for the latest drivers on the maker's website.
check it in your list. this is a lexmark issue not a lion issue.
http://support.lexmark.com/index?page=content&id=OS22&locale=EN&userlocale=EN_US

IDVD5, "The application iDVD could not be opened because the required ha."

First post in these subject forums. I am posting the same text in iDVD and iMovieHD which were from iLife'05, but I won't post there.
I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
The movie could not be sent to iDVD, because of an unknown error.
"Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
Next I tried: File > Burn Project to Disc......and this error comes up.
No Disc Burning Drive Found
"If you have an apple-supported disc burner, please check your connections and try again."
The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
Thanks all for your help in advance. John

Klaus1, thank you.
I will verify again to make sure that I have the correct driver installed for the LaCie drive and I know positively it was connected via firewire.
That being said, after reading a lot of postings on the web, I am getting the impression that these iLife05 applications need a native Apple superdrive on order to burn a DVD. I do not have any other third party apps loaded on it yet it, but I will load some that can burn to a DVD. If I am successful in getting the non-Apple apps to burn a DVD with the LaCie, I will try again with iDVD5 and if I still can't get iDVD to do it, then maybe my assumption would be valid.
Thanks again!

I am getting a message "can't open because PowerPC applications are no longer supported" What do I do about these programs?

I am getting a message "can't open because PowerPC applications are no longer supported." What do I do about these programs?

In defense of the original poster, I just went through the Lion page (http://www.apple.com/macosx/) and the sub-pages linked on the top (including the 250 new features) and nowhere does it say anything about dropping Rosetta/PowerPC compatibility. A simple compatibility line in the tech specs page could help these kinds of threads. Nevertheless, the argument that Apple should have made this change more prominent is quite valid IMO.
Remember that Apple prides itself on being simple so don't expect everyone to be as up to date on compatibility issues as you. With the big uptake of new users in the last couple of years, these kind of questions should be expected, especially since most users are coming from Windows where compatibility is king (I can run apps from 10+ years ago with almost no issues).
Complicating the issue further is that there is no obvious way to see which older applications are PPC and which are not (who knew Warcraft 3 was PPC and not universal??).
A simple solution could be for Apple to provide copy of Rosetta that users can purchase if they want compatibility. Who knows, maybe such a solution is going to come from a third party

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

PowerPC no longer supported -what else can i do?

Have just purchased a sassoon font for MAC (at £67!) and error message 'powerpc no longer supported' appears when i try to install.
What else can i do?
Thanks

You have Mac OS Lion listed as your operating system, however, Lion is not supoorted on Power PC. If you really are running Lion natively then there should not be a problem. Not that I think you are mistaken about your OS, but it may be an error with the font itself that wrongly thinks you are using Power PC. You should really contact customer support of the company you bought the font from.

Converting Imovie HD to Quicktime because PowerPC no longer supported

I have Imovie HD files that I created for use in my powerpoint presentations and had no trouble accessing them til I got Lion software with my MacBook Pro 2011. HELP! I need those files and cannot open them and don't know how to convert them! Other tips on how to avoid this problem in future welcome.
Thanks! Terese

If the version of iPhoto you have is from Snow Leopard and prior, then it will need to be updated to function with Lion or Mountain Lion. This is because applications which were meant to be usable on 32 bit versions of OS X and non-intel processors, are no longer supported.
Any old programs which are not fully 64 bit and designed to work with intel processors will not function with Lion or Mountain Lion.

You can't open the application "Belkin USB Peripheral Switch.app" because PowerPC applications are no longer supported.

Getting this message ever since I upgraded from Snow leopard.

Power PC applications have not been supported since Lion was introduced last year. You might want to check with Belkin to see if they offer an Intel version.

HT1212 someone entered the password wrong in my ipod too many times and it says its disabled to plug into itunes, when i plug it in to itunes it says it can't open because its password locked. so what can i do?

the password on my ipod was disabled and says plug into itunes. when i plug it into itunes it says the ipod cant connect because it is password locked.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS1702 I updated Facebook application and I can't open it it shut down immediately

I updated Facebook application and I can't open it it shut down immediately what shall I do ?
And how to change my Facebook profile picture or cover photo from my I pad ?

Try giving it a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
If that doesn't work, look in the app's page in itunes. It's entirely possible Facebook has put out a 'bad update' that is crashing. Look in the reviews to see if others have your problem.
There are other ways to use Facebook without the app. You can use safari to access either the regular facebook site or m.facebook.com . or you can look for third party apps. I have one called Facely but there are others.
the 'official' facebook app is buggy at best.

I just bought and downloaded LION and now I get a box that says Microsoft Word and Excel cannot open because PowerPC Apps are no longer supported.

I just bought and downloaded LION and now I get a box that says Microsoft Word and Excel can not open because PowerPC Apps are no longer supported. How can I reactivate Word and Excel.

You need to upgrade to Office 2008 or newer, or switch to a product such as OpenOffice or iWork.
(61340)

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
Does anybody know if this is fixable or if I need to just buy a new disk?
Thanks!!!

I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
Does a macbook pro meet these requirements?

I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can't open the application "Install Adobe Photoshop 6.0" because it may be damaged or incomplete".

I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
Does anyone know how to fix this problem?

you probably have an incomplete/corrupt download.
to confirm check the file size against the expected file size.
then re-download perhaps with a different browser.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

The application MIDISPOT remote can't open because PowerPC no longer supported, what do I do about that?

Similar Messages

Maybe you are looking for