The Applications File Server could not open the file

Hi All,
We have shared appl_top between 2 nodes.
When running concurrent request such as active user report, i got the following error:
The Applications File Server could not open the file oXXXXX.out for read
I have found metalink note
The Applications File Server could not open the file o611681.out for read (Doc ID 1311372.1)
The $APPLCSF are all fine and so are the permissions.
I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?
i thought i can start up all node at the same time.
am i right to say that the last node run adautocfg is the primary node?
Thanks in advance

I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?Do you have PCP implemented? If yes, you do not need to start the CMs on the second node and running adcmctl.sh script on the first node would be enough.
i thought i can start up all node at the same time.What exactly do you start?
am i right to say that the last node run adautocfg is the primary node?Please explain what components are running on each node.
All the URLs Accessing EBS Are Getting Redirected to the Web Node Where Autoconfig Last Ran [ID 1349509.1]
Thanks,
Hussein

Similar Messages

  • Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

    Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

    Marc-
    The Safari message is probably telling the truth.  Is the problem repeatable at several websites, or is it only with a particular one?  If all websites, you may have trouble with your internet connection downloading large amounts of data.  Mail messages are relatively small unless there are attachments or embedded images.
    Fred

  • How can I resolve error message, Linklok could not open the file ?

    I have an MP3 subscription download link (with Abraham HIcks) but I am unable to complete the download because I get the error message "Linklok could not open the file".

    Please have the site administrator contact us at vibralogix.com as it appears something is not setup correctly with Linklok on their site.

  • Unable To Use Internet/Safari Could Not Open The Page Because The Server Stopped Responding

    Hi
    I having a problem while opening safari on my iphone-4  the error message "safari could not open the page because the server stopped responding"
    But i have checked router side, no problem found because router is working with other device laptops and other devices,
    if any one know the issue, please help me....

    I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

  • HT4623 safari could not open the page because the server stopped responding

    purchased ipad 2  two weeks ago everything working fine but today problem with wi-fi connection as safari comes up with a message  could not open the page because the server stopped responding, but my desktop and laptop working off the same wi-fi are connected to the internet fine.
    can somebody please help me

    I have this same problem now.   Works fine on Wifi, but if I try to access the Internet on 3G I get the same message  :
    "Safari could not open the page because the server stopped responding"
    I can use WhatsApp & my Gmail works, so I am accessing the Internet, just not able to browse...
    Strange thing is.... I'm using a 3 (Three) SIM.  If I switch to my Giffgaff SIM, it works fine.  Swap back to 3 & I get this message.
    I have re-booted & done the "Settings>General>Reset>Reset network settings" several times.   No effect.
    Any ideas?

  • Could not open the ICU common library

    Dear all,
    I’ve done heterogeneous OS migration on our Solution Manager system release ver. 7.0 Ehp1, from HP-UX 11.31 to RedHat 6.5. Then we need to perform the system upgrade to version 7.1
    Kernel version is SAP Kernel :  720_EXT_REL.
    Database Client Library : OCI_112, 11.2.0.3.0, V1, default.
    created in  :  Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116
    ICU Version : 4.0.1 Unicode Version 5.1
    Everything is working fine. EarlyWatch reports are prepared. But when I checked the SLD http://saptst:54000/sld I’ve got the error “Internet
    Explorer cannot display the webpage”. I also checked with IP address and it’s the same error.
    With Chrome browser the error is “Oops! Google Chrome could not connect to saptst:54000”
    I checked the SLDCHECK and got:
    Exchange Infrastructure: Test LCR Connection
    Properties of RFC destination SAPSLDAPI RFC host:
    %%RFCSERVER%%
    program id: SAPSLDAPI_SMP gateway host: saptst
    gateway service: sapgw40
    Testing the RFC connection to
    the SLD java client...
    RFC ping was successful
    SLD server access
    settings:
    host name: saptst
    port number: 54000
    user : SLDAPIUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function
    LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code 3
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    SAPSLDAPI RFC is working fine.
    But on the putty connection with the server I’ve got “Unknown function module: Function SLDJAVA_ACCESSOR_REQUEST not found”.
    I’ve checked the std_server0.out file in the work directory:
    Could not open the ICU common library. The following files must be in the path described by the environment variable
    "LD_LIBRARY_PATH":
    libicuuc.so.30, libicudata.so.30, libicui18n.so.30
    [nlsui0_mt.c 1620] pid = 3079
    LD_LIBRARY_PATH is well set in environment of the smpadm user.
    The RFC libraries in the /sapmnt/SMP/exe, /usr/sap/SMP/SYS/exe/run, /usr/sap/SMP/SCS01/exe
    and also in /usr/sap/SMP/DVEBMG40/exe are
    libicudata.so.34
    libicudata.so.40
    libicudecnumber.so
    libicui18n.so.34
    libicui18n.so.40
    libicuuc.so.34
    libicuuc.so.40
    There is no libicuuc.so.30, libicudata.so.30, libicui18n.so.30.
    I’ve also downloaded the last kernel patches, unpacked and checked the RFC libraries, but there were no libicuuc.so.30… with number 30.
    Why the system is searching for these libraries with 30, but not 34 or 40?
    Can you please help how to solve the error “Could not open the ICU common library”?
    Is this the problem why I can’t open the browser http://saptst:54000/sld and I got the error “Internet Explorer cannot display the webpage”?
    Thank you in advance.
    Best regards,
    Ruzica

    Dear all,
    I've tried to deployed Java with:
    SAPJEE10P_5-10003469.SCA
    SAPJEECOR10P_19-10003466.SCA
    SAPJTECHF10P_21-10003468.SCA,
    but the file for the SAPJTECHS, SAPJTECHS10P_26-10003467.SCA finished with the
    error again for "Could not open the ICU common library.
    The following files must be in the path described by
    the environment variable
    "LD_LIBRARY_PATH":
    libicuuc.so.30, libicudata.so.30, libicui18n.so.30
    The deployment failed with the following error:
    Starting Deployment of SQLTrace
    The SDM will now start SAP Web AS Java instance processes in order to perform online
    deployment. After that the deployment will proceed.
    It could take some time, so please be patient.
    Aborted:
    development component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0', grouped by :SDM could not start the J2EE cluster on the host saptst! The online deployment is terminated. A timeout occured during the cluster running verification. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
    Deployment of SQLTrace finished with Error (Duration 1801206 ms)
    Starting Deployment of SAP_JTECHS
    Aborted:
    software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.10.26.20121031152700''/'0':Failed deployment of SDAs:development
    component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0' :
    aborted
    Please, look at error logs above for more information!
    Deployment of SAP_JTECHS finished with Error (Duration 918 ms)
    I've tried:
    #cd /usr/sap/SMP/DVEBMGS40/SDM/program/
    #./StopServer.sh
    #./sdm.sh jstartup mode=standalone
    #./sdm.sh j2eeenginestartstop timeoutmillisec=1800000
    #./sdm.sh jstartup mode=integrated
    #./StartServer.sh
    But still the error "SDM could not start the J2EE cluster on the host saptst" appeared again.
    Can you please advice what should I do to deploy the SAPJTECHS10P_26-10003467.SCA ?
    Thank you in advance,
    BR,
    Ruzica

  • Ipad, Error message "Safari could not open the page"

    Hi... I am getting the error message "Safari could not open the page because the server stopped responding" 
    I have read the previous replies to this error message and have made sure the Ipad is connected to internet (skype works fine.)
    I have also done a hard reset on my Cisco router.
    I have Reset Ipad to factory settings twice.
    I have Reset network settings five times
    I have Powered off and on five times,
    turned wifi off and on countless times.
    Any idea other ideas? Ipad was bought in US 3 weeks ago.  Worked fine at hotel in mexico.  I am now in Bolivia.  Different countries screwing it up? Could my router be too old? My Mac and iphone work fine on it though, although they are also old and since my macbook refuses to update it runs on OSX 10.5.8
    Thanks, your help is immensely appreciated.

    Can you connect to the internet using other WiFi networks? Have you even tried outside of your own home WiFi network? Have you tried anything I here yet?
    iOS: Troubleshooting Wi-Fi networks and connections
    Occasionally I get this message in Safari but I also can't get online with any browser when I get the message. What I always do - and it always works for me - is to close all apps on my iPad and reset the device. I don't know if closing apps has any real effect or not. Most likely is it the system reset that brings it back to normal behavior.
    Due to the fact that you have restored to factory settings twice already, I can't believe that resetting the iPad would do any good at all. But you are getting nowhere anyway, so try it if you like.
    In order to close all of your apps, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Could not open the file in application server

    Hi All,
    I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot  exist. Why it is getting archived? Please help me.
    Thanks,
    Venkata

    Hi Sagar,
    Below is my file path : /dv2/tmp/instl/salesdata.txt
    When I checked in the below path the file exists.
    /dv2/tmp/archive/salesdata.txt
    Solved the issue.
    Thanks,
    Venkata

  • When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

    When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
    == This happened ==
    Every time Firefox opened
    == Two days ago, for no apparent reason.

    In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
    Open Finder and use one of these:
    * Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
    * Open the "Go" menu and hold down the Option key to make the Library appear
    You can also use this command in a Terminal window to remove the hidden flag.
    * Mac HD > Applications > Utilities > Terminal
    * chflags nohidden ~/Library

  • Error: could not open the file /var/lib/pacman/sync/.....

    Heya Arch Forums,
    So it's my first time installing and I've made it to the point were I'm ready to install X11.
    When I run "pacman -S xorg-server xorg-xinit xorg-server-utils" my console returns the following errors:
    error: could not open file /var/lib/pacman/sync/testing.db: Unrecognized archive format 
    error: could not open file /var/lib/pacman/sync/multilib.db: Unrecognized archive format
    error: could not open file /var/lib/pacman/sync/core.db: Unrecognized archive format
    error: could not open file /var/lib/pacman/sync/extra.db: Unrecognized archive format
    error: could not open file /var/lib/pacman/sync/community-testing.db: Unrecognized archive format
    error: could not open file /var/lib/pacman/sync/community.db: Unrecognized archive format
    error: could not open file /var/lib/pacman/sync/testing.db: Unrecognized archive format
    These errors repeat again followed by:
    error: target not found: xorg-twm
    I'm in Canada, so I've only set my mirror list to use "Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch"
    Also, in my /etc/pacman.conf all SigLevel's are = Never.
    Thanks for any replies.

    skunktrader wrote:Did you run pacman -Syu before attempting to install new packages?
    Thanks for the quick reply
    Yes, however pacman -Syu as well as pacman -Syyu return the same errors.

  • I downloaded acrobat reader dc. after download completed, I could not open many PDF files. Error read: "could not open this file because its either not a supported file or because the file has been damaged". I opened a new user account and moved these fil

    I recently downloaded acrobat reader dc. After download was complete, I could not open PDF files. Error read "Adobe acrobat reader DC could not open this file because its either not a supported file or the file has been damaged". Any suggestions?

    HI davidd92392148,
    Is this error occurring for all PDF files that you try to open? There is an issue where all file icons can change to the PDF icon after installation, so is it possible that the files you're trying to open have been affected by this issue (and aren't actually PDF files)? Please see Application, file icons change to Acrobat/Reader icon.
    If that document isn't the key, then please tell us more about these files. Where are they stored? Did they open in previous versions of Reader?
    Best,
    Sara

  • Nvidia Input/Output error. Could not open the device file /dev/nvidia0

    Hello, I finally have Arch running on my MacBook pro 3,1 (mid 2007) but when I startx after installing Nvidia drivers it gives the Input/Output error and states "could not open device file /dev/nvidia0." I tried everything from the Nvidia wiki, and nothing seems to work. Does anyone please have any other ideas or things to try? My Nvidia card is 8600M GT and I have installed xorg-server, xorg-apps and Nvidia-utils already.  Also is it possible my graphics card is not compatiable with this new kernel? Thank you for your time.

    You know that this posts a huge list - and I couldnt remember how to trim for certain keywords (which one would you be interested in?).
    So here the last few things regarding Video: from dmesg:
    [..] nvidia: module license "NVIDIA" taints kernel.
    [..] Disabling lock debugging due to kernel taint.
    [..] nvidia 0000:01:00.0: enabling device (0002 -> 0003)
    [..] vgaarb device changed decodes: PCI:0000:01:00.0,oldcodes=io+mem,decodes=none:owns=none
    [..] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.37 Wed Aug 8 19:52:48 PDT 2012
    then comes Swap, wlan, eth0 etc..

  • SharePoint designer 2013 crashes most of the time, when opening sites. Error: The server could not complete the request.

    Hi,
    I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
    After adding the site name in open site and clicking ok, the sharepoint designer crashes.  At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
    more specific information, click on the Details button".
    When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
    I have tried doing "IISreset" multiple times, which has not helped.
    Has anybody faced this issue? How to fix this?
    Thanks

    Hi Venkatzeus,
    Firstly, I  need to verify the followings:
     1.Whether  this issue occurred on a specify SharePoint 2013 site.
     2.Whether  you have extended the problematic site.
    Make  sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
    There are other probable causes for this issue:
     1.Anonymous authentication is not configured for the problematic web application in IIS
        Fix: Enable Anonymous authentication in IIS
     2.Server is running out of memory
        Fix: Free up memory on the server
    Here are some similar articles for you to take a look at :
    http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
    http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
    I hope this helps.
    Thanks,
    Wendy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

Maybe you are looking for