The back button doesn't work for microsoft outlook
the back button for microsoft outlook web access doesn't work. other web pages are fine
To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier.
Similar Messages
-
The back button doesn't work for some websites after downloading version 4.0
I recently downloaded firefox version 4.0. Upon downloading it I had a few issues occur with my browser. One issue was that all of my bookmarks that were on my toolbar disappeared. Also, when I visit a website and am browsing through it, if I want to go back to a previous page the back button doesn't work properly. Instead of sending me back to the previous page I was viewing it sends me all the way back to the home page or wherever I started on that website. This problem basically affects all websites that I visit. I would like to uninstall the new version of firefox and just go back to my old one if that's possible? Thanks
To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier. -
The back button doesn't work anymore
I have updated my firefox and since then the back button doens't work anymore and also the browser is slowly... The earlier version of firefox was better!
Indeed the culprit was McAfee SiteAdviser, the cure is
for Windows 32-bit: https://sadownload.mcafee.com/products/SA/IE/upgrade/3.3.1/32/saUpgrade32.exe
for Windows 64-bit: https://sadownload.mcafee.com/products/SA/IE/upgrade/3.3.1/64/saUpgrade64.exe -
The browser's back button doesn't work for portlet navigation
I developed a simple portlet that uses webflow navigation to navigate within a
portlet. I made this portlet visible on a portal's home page. When I view my
main portal page, the URL is "http://localhost:7501/samplePortal/index.jsp "
In this page I can see my portlet. When I click on a link inside of the portlet,
it takes me to the page I want. Then, when I click the browser's back button
to go back to the previous page(main portal page), it doesn't work. The URL changes
back to "http://localhost:7501/samplePortal/index.jsp", but portlet itself doesn't
take me to the previous page. Anybody have any ideas? I am guessing it's because
the wfevent is null, but how do I resolve this problem?Hi Jay,
I was able to get the back button to work for portals by commenting out the following
lines in the portal.jsp:
// prevent caching these pages at clients.
// response.setHeader("Cache-Control", "no-cache"); // HTTP 1.1
// response.setHeader("Pragma", "no-cache"); // HTTP 1.0
// response.setDateHeader("Expires", 0); // prevents caching at proxy
I also made sure my browser was set to allow the caching of pages.
You are having problems, because we set the response headers to tell the browser
to not cache the portal pages, and the portlet state has not changed back to it's
original state.
-John Bimson
"Jay" <[email protected]> wrote:
>
I developed a simple portlet that uses webflow navigation to navigate
within a
portlet. I made this portlet visible on a portal's home page. When
I view my
main portal page, the URL is "http://localhost:7501/samplePortal/index.jsp
In this page I can see my portlet. When I click on a link inside of
the portlet,
it takes me to the page I want. Then, when I click the browser's back
button
to go back to the previous page(main portal page), it doesn't work.
The URL changes
back to "http://localhost:7501/samplePortal/index.jsp", but portlet itself
doesn't
take me to the previous page. Anybody have any ideas? I am guessing
it's because
the wfevent is null, but how do I resolve this problem? -
When I open a new tab, then go to a new website, the back button doesn't work.
For instance, I open craigslist in a new tab, then I click on "sporting goods". I try to click back to go back to the original craigslist page and the back button is not lit up and does not work. However if after I am on the sporting goods page (the second page I've looked at in that tab) I click on a set of golf clubs, the back button works to go to the sporting goods page.
Please help, I have to use explorer in the mean time :(I had this problem, but in addition, the refresh button didn't work on the new tab. If you're running McAfee SiteAdvisor, disable it in the addons menu, allow firefox to restart, and see if that solves the problem. It did for me.
This problem has been reported on McAfee's forum and they say they're working on a fix. -
The back button doesn't work on some pages
I go to bookmarks and navigate to a page, when I use a link on that page to go to another part the back button on the tool bar does not become active to I can go back. This seems to be happening on all web sites.
There used to be a very useful down arrow button next to the back button which brought up recent history, but it was removed in Firefox version 4. For the life of me, I don't understand why. If you have an older version, just click the down arrow button and select the page you were at before you loaded the offending page.
If you have Firefox v 4 or 5, the best workaround I know of is to do an <alt-s> from the keyboard, which will bring down a history list from which you can select the page you were at before you got trapped. Alternatively, you can bring up the old style menu bar by pressing either Alt or F10, and then drop down the history menu by clicking on it with your mouse. If you want to make that menu bar permanent, you can select View -> Toolbars -> Menu Bar. -
The back button doesn't work.
I can see it, but its not highlighted as if I just opened a new page and have nothing to go back to. I can't return to my previous page.
You are on 3.6.8 so this may not apply to you
Extensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons
*McAfee Site Advisor (update perhaps 3rd week July 2011)
*Yahoo Toolbar (https://support.mozilla.com/questions/845691)
For you it might be
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
You should download 3.6.18 so you will be at least on a supported version of Firefox, read the top, you want -- English (US)
* http://www.mozilla.com/firefox/all-older.html
When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would). -
I've noticed the problem yesterday and it has happened few times today again.
The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing -
I am using 3.6.15 and tried version 4 to no avail.
Do you have McAfee Site Advisor installed? See http://support.mozilla.com/nl/questions/753639
I'd also advise you to update to v3.6.16 because the version you're running right now is a security risk. Click '''Help '''| '''Check For Updates'''. -
How to get itunes downloaded on my computer. The Download button doesn't work for me.
I seem to be unable to download the latest version of itunes. What can I do to fix this?
I've been trying to organize all my music, making
sure artist and album are filled in, everything
spelled correctly. I'm not able to change some
things because iTunes can't locate the file on my
computer. So is there a way for iTunes to search my
entire computer for every music file and import
everything it finds? This would make my life so much
easier since I have music scattered all over in
places I can't even remember.
Under Advanced menu click on Consolidate library...
I'm trying to add album artwork as well. How come
some say "Album Artwork Not Modifiable"?
Is there a way to make it so if I delete a song from
iTunes, it goes to the Recycle Bin? I have a lot of
duplicates. I don't want them taking up space on my
computer.
IF you delete it from Music (eg library) it goes to recycle bin (iTunes asks you if you want this...). YOu still have to empty the Recyle Bin to have it be totally gone. -
My mini Ipad says: I haven't backed it up to iCloud for 2 weeks. Back ups happen when this ipad is plugged in, locks, and connected to wifi.
The ok button doesn't work, I can't open settings to make sure wifi is connected. Nothing works!!! I have it pluggled into my computer but apparently it isn't backing up since nothing has changed. it is unuseable!Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
-
the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
I bought this iphone 3gs off an app. I just want to use it as an ipod. it is sim locked (with two attempts left) and the lock button doesn't work at all. What can I do? I just want to use it as an ipod.
I have also tried everything. I took the sim card out and put it back in again. And I have also left it out. And I have tried connecting it to itunes but I need to unlock. (some of these were suggested by the seller)
Please help me.
imMy guess - and this is completely a guess - is that the SIM in that phone has a PIN that was added to it by the previous owner. Whomever you bought it from didn't bother to check for this (or didn't care) before they got it from the previous owner.
You need to get a new AT&T SIM for that phone - you could even borrow one from a friend if they have one that will fit the phone. You would only need the SIM to activate it.
There is no way to activate an iPhone without a SIM in it, even if you don't plan to use it as anything other than an iPod.
~Lyssa
Maybe you are looking for
-
How to get GP API for EHP1 NWDS n how to create a WDP iview in EHP1
Hi Frndz... I have 3 Qun's.. 1) How to get GP API in EHP1 NWDS7.1 in NWDS 7.0 we can get by D/L gp_api_nw04s.zip,gp_TopLevelDCs.zip and xtracting these to Location to Extract gp_api_nw04s.zip=> C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.t
-
How to restrict Order types KA and AB in script output form
How to restrict KA AND AB order types in script output data is coming from bkpf-blart . program is rfkord10. and form is f140_acc_stat_1 in script output i dont want to display KA AND AB order types .. data is coming from standard report. i copied
-
<i>Locking duplicate thread.<br>Please continue here: [[/questions/1019377]]</i> now video is not play video
-
Unable to start Enterprise Service Builder
ES builder for Netweaver CE Current SP installed: SP05 Hi... even with SP5, i still could not start the ES builder from client side. FYI, it can be started from the mahcine which CE is installed, however, the machine is a VM, 4Gb of RAM assignmed. A
-
IOS 5.1 on iphone 4s excel and rtf preview gone
Updated to ios 5.1 on my iphone 4s and now it is not possible to preview xls or rtf documents. My work auto-generates my schedule in these formats nightly and since the 5.1 update I can not open them. I updated my phone OTA, I have since reset it res