The backup disk image "/Volumes/George Stoddard's Time Caps-1/George Stoddard's Computer (4).sparsebundle" is already in use.
I am unable to back up my iMac ang get this message when I try: "The backup disk image “/Volumes/George Stoddard's Time Caps-1/George Stoddard’s Computer (4).sparsebundle” is already in use."
Look at the more like this column on the right. we are getting asked this 10times a day.
C12 http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.
First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
The backup disk image “/Volumes/Richard Searson's Time Caps/Richard’s iMac.sparsebundle” is already in use. It hasnt backed up for over 24 hours now and I am concerned as only in May my whole system crashed and the time machine was not able to recover any data. I do not want this to happen again. Thanks
This is our most common problem.. and you are number 2 today.
Look on the right..
More Like This
Your problem is repeated with the solution ad nauseam.
But the solution is simple.. pull out the power cord from the TC.. count to 10.. Plug in the power cord again.
This is just poor networking from Apple.
Whenever you have TM issues.. this is the place to check.
http://pondini.org/TM/Troubleshooting.html
Your issue is C12. -
I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars
You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html -
The backup disk image "/Volumes/Jeffrey Brown's Time Capsule-1/Main.Sparsebundle" could not be created (error 17). How can I fix it?
Try just rebooting the TC.. or a reboot of the network..
Turn everything off and restart in correct order.. modem.. TC.. clients. 2min gap.
Try C9 in pondini for that error.
http://pondini.org/TM/C9.html
I generally make a nuisance of myself here by suggesting Apple names are more curse than help. Apple automatic naming conventions are causing havoc.. change everything to SMB compatible names.. ie windows networking which is the base common denominator of networking.. ie if it works with SMB it works on any OS.
Short.. less than 20 characters. 10 is usually plenty. Why type more than you need to?
No spaces.. spaces have to be removed even in apple names..
Pure alphanumeric.. some characters cause issues.. again the apostrophe is a nasty item to all other OS.
The -1 is stupid Mountain Lion.
eg Jeffrey Brown's Time Capsule-1
Change to JBTC -
The backup disk image “/Volumes/Felix Pereira's Time Capsul/Felix Pereira’s MacBook Pro.sparsebundle” is already in use.
Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.
A constant bug in Mountain Lion.
Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
Give that a try first. -
The backup disk image “/Volumes/Patricia Walden's Time Ca/PATRICIA’s iMac.sparsebundle” is already in use. I get this when the time machine should be doing a back up.
Please shift the focus of your eyes over to the far right of this web page and locate the heading of More Like This.
Multiple answers and solutions are available there. -
I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.
Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html -
What do I do when I get this Time Machine error message?
"The backup disk image “/Volumes/Mark McConnell's Time Capsu/Mark’s MacBook Pro.sparsebundle” is already in use."Unplug your Time Capsule from power. Wait 10 seconds and then power it on again. When the light goes green try backing up again.
-
How do I delete the "open" backup?
thanks in advancePlease look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
How do I get the time machine to work again. It's been dong this for 3 days, over and over again.
This is stock standard issue.. report 5-10 times a day here.
Solution is good old.. "Did you turn it off and on again??"
Unplug the TC.. count to 10.. plug the TC power back in again.
This fixes 98% of problems.. and shows the advancement in Mac OS and Apple firmware.. to be just like that other OS we love to hate.
If you cannot get satisfaction.. reboot the whole network.. never a bad idea.. Everything off and start in correct order. Modem.. wait 2min.. TC.. wait 2min.. Clients.
Tell us if you still have issues or read the master wizard of all things TM/TC
http://pondini.org/TM/Troubleshooting.html
C12 -
Can you please help me to solve the following problem occuring during back up with time machine?
The backup disk image “/Volumes/Andreas ZERVOS's Time Capsu-1/Andreas Zervos’s MacBook Pro 1.sparsebundle” could not be created (error -1)Hello,
I'm not sure what it means, but...
http://www.levelofindirection.com/journal/2009/10/10/using-a-networked-drive-for -time-machine-backups-on-a-mac.html
http://www.coastalvectors.com/blog/2011/02/understanding-time-machine-and-sparse -bundles/
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
I can't imagine anything TMwise not covered. -
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9.
Maybe you are looking for
-
Lost all my actions and 3rd party filters after upgrading to Photoshop CC 2014
How do I get all of my actions and 3rd party filters from Photoshop CC to Photoshop CC 2014?
-
The file's security settings do not allow export.
The file's security settings do not allow export.
-
How to write into generated HTML " " etc.?
Hi! I use xmlparser_v2_0_2_6 for JAVA2 Solaris7. When I declare ENTITY as: <!ENTITY nbsp "#xA0;"> write into generated HTML symbol (code=#xA0), but I need " " string. Intuitivity I can declare ENTITY as: <!ENTITY nbsp " ">, but it is not work. W
-
XOBX/XBOX 360 BOTH ON LIVE
CAN SOMEONE HELP. I HAVE ROUTER WRT54GV5 CONNECTED TO MY COMPUTER AND XBOX 360 WITH THE LIVE AND GAMING ADAPTER. DO YOU KNOW IF I PURCHASE ANOTHER GAMING ADAPTER AND HOOK UP ANOTHER LIVE ACCOUNT IF THE ROUTER WOULD SUPPORT ALL THAT?
-
How do I connect my iPad to my wireless printer
How do I connect my wireless printer to my I pad